Industrial 1-Port Gigabit 95W Ultra Splitter Key Features Interface 2 RJ45 interfaces 1-port + input 1-port output 2 output (4-pin terminal block) 1 12V/24V DIP switch over Ethernet Complies with ultra over Ethernet end-span and midspan PDs Highly Convenient and Robust Industrial Splitter PLANET is an Industrial-grade Ultra over Ethernet Splitter which delivers both the Ethernet data and a 60-watt to 110-watt power from Ultra PSE ( Source Equipment) over an UTP cable. It comes with a selectable 12V or 24V DIP switch, enabling to deliver a maximum of 95-watt power output to a non- powered Ethernet device. It supports passive 10/100/1000Mbps Ethernet connection and distance up to 100 meters. To fulfill the growing industrial applications, the IPOE- 171S is designed to work under the operating temperature range from -40 to 75 degrees C. The is an ideal solution to transferring power to a traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment. Complies with IEEE 802.3at over Ethernet Plus endspan/mid-span PD Supports input power up to 110 watts Splits the 50~56V power over RJ45 Ethernet cable into 12V/24V output Remote power feeding up to 100 meters Hardware IP30 metal case protection DIN rail and wall mount design -40 to 75 degrees C operating temperature Quick and Easy Ultra Network Deployment Many high-power required traditional Ethernet devices are not designed with PD (ed Device) capability to accept power over UTP cable. They can only get power through their jack while their RJ45 interfaces accept only Ethernet data. The, functioned as an Ultra PD (ed Device), splits the combined data and power stream into two separate cords to offer more non- applications, such as: POS AIO (All-in-One) touch PC and thin-client Digital signage and display tablet PTZ speed dome Other network devices that need higher power to work normally Sheet 1 1
>50W non- devices Ultra PSE Ultra Splitter Digital Signage POS System 4-pair UTP 12V/24V Thin Client Health Care Lighting 100 meters When functioned with the, these non- Ethernet devices can immediately become -ready without any modification required on their side. The frees the device deployment from restrictions due to power outlet locations, which eliminate the costs for additional AC wiring and reduce the installation time. Innovative, Selectable Output Voltage Via the innovative 12/24 volt DIP switch on the front panel, the can supply either 24V power to industrial equipment or 12V output to the common network devices. It highly increases the flexibility of the product applications. Dual Output Capability The shares its 55-watt output power with not only a single power-hungry equipment but also two non- Ethernet devices simultaneously through a 4-pin terminal block. For example, the two power output can be applied as shown below to completely solve the need of electric source: IP camera ( 1) + Outdoor housing with fan and heater ( 2) IP camera ( 1) + Pan & Tilt motor ( 2) Analog camera ( 1) + IP video server ( 2) 60W in ed Device 1 Maximum Output 48 Watts 60W in ed Device 1 ed Device 2 Total Maximum Output 48 Watts Industrial Ultra Splitter 2
Environmentally Hardened Design With compact, slim type IP30 industrial case protection, the space-saving Industrial Ultra Splitter can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 degrees C, the is the ideal product for co-working with Industrial High Injector which can feed the power to non- devices up to 100 meters (328 feet) away in those harsh environments. PTZ Speed Dome + Line () 1000Base-T UTP 1000Base-T UTP with Applications Ultra Switch and Splitter Installation For a place which is hard to find the power inlet, the separates digital data and power into two optional outputs (12V/24V ) to non- devices such as laptops, PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters. 60W Ultra Switch + 100 meters 60W Ultra Switch PTZ Camera 1000BASE-T UTP 1000BASE-T UTP with Line () 75-40 12V/24V 3
Specifications Product Hardware Specifications Input Port Interface Output Port Out Plug Connector DIP Switch Ready 802.3at + In LED Indicator Ultra or 802.3bt in 12V 24V Ultra (60W/75W/95W) Network Cable 802.3at + Rate Dimensions (W x D x H) Weight Installation Enclosure Requirements Output (at 56V Input) Consumption over Ethernet IPOE-E174 1 10/100/1000 BASE-T RJ45 ( + ) In 1 10/100/1000 BASE-T RJ45 Out 1 removable 4-pin terminal block 12V /24V output voltage Orange 4-pair UTP Cat5e, 6, up to 100m (328ft) 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) 10/100/1000Mbps 32 x 87 x 135 mm 425g DIN rail/wall mountable IP30 metal case 50 ~ 56V 110-watt input: 75-watt input: System on with input: Ethernet full loading without output: Full loading with maximum 12V, 4A output: Full loading with maximum 12V, 8A output: 12V, 8A (max.) 24V, 4A (max.) 12V, 4.5A (max.) 24V, 2.3A (max.) 3.7 watts 3.7 watts 60.2 watts 110 watts (110-watt in) Standard 802.3bt Type 3/Type 4 over Ethernet, 4-pair 802.3at + and Cisco UPOE compliant with voltage within 50V-56V Output 12V/24V by DIP switch control end-span + mid-span Supply Type end-span mid-span Pin Assignment 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-) Standards Conformance Standards Compliance Regulatory Compliance Environment Operating Temperature Storage Temperature Humidity IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3at over Ethernet Plus IEEE 802.3af over Ethernet FCC Part 15 Class A, CE -40~ 75 degrees C -40~ 85 degrees C 5 ~ 95% (non-condensing) 4
Diagram Top View Side View Front View Side View Rear View PWR 30W 60W Input Industrial Ultra Splitter IN 10/100/1000T Out Mounting Kit DIN-Rail Kit 10/100/1000T Output V V V+ V+ 12V Voltage 24V 12V 24V Mounting Kit Dimensions ( unit = mm ) Ordering Information Industrial 1-port Gigabit 95W Ultra Splitter Related Products GS-4210-16UP4C GS-4210-24UP4C GSW-1222VUP IGS-5225-4UP1T2S POE-171 POE-172 POE-173 UPOE-800G UPOE-1600G 16-port 10/100/1000T Ultra + 4-port Gigabit TP/SFP Combo Managed Switch 24-port 10/100/1000T Ultra + 4-port Gigabit TP/SFP Combo Managed Switch 8-Port 10/100/1000T Ultra + 2-Port 10/100/1000T + 2-Port 1000X SFP Gigabit Ethernet Switch with LCD Monitor / 380W Industrial L2+ 4-Port 10/100/1000T Ultra + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch Single-port 10/100/1000Mbps Ultra Injector (60 watts) 60-watt Ultra over Ethernet Injector 60-watt Ultra over Ethernet Injector 8-Port Gigabit 60W Ultra Managed Injector Hub (400W) 16-Port Gigabit 60W Ultra Managed Injector Hub (600W) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.tw PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright 2017 PLANET Technology Corp. All rights reserved. 5