Team 2.5 Solid State Disk L5 LITE http://www.teamgroupinc.com All rights are strictly reserved.any portion of this paper shall not be reproduced, copied, or translated to any other forms without permission from TEAMGROUP.
Table of Contents 1. Introduction... 1 2. Main Features... 2 3. Product Specification... 2 4. Controller Block Diagram... 3 5. Electrical Specifications... 3 6. Supported Command Sets... 5 7. Mechanical Dimension... 7 8. Product Ordering Number... 8
Revision History Revision History Date Author 1.0 New Creation 2017/02/14 Leo Yang
1. Introduction 4 times faster When your old computer is running slow, do you feel that it is dragging down your efficiency? With great performance and ultra-fast read and write speed, L5 LITE solid state drive is 4 times faster than the traditional hard drive. It can not only speed up boot time, shutdown time and the response time of applications, but also lightweight and easy to carry. It is absolutely the best product to replace traditional hard drive. Various capacities to choose from, and the performance is greatly enhanced L5 LITE solid state drive is using SATA III 6Gbps specification and there are 60GB, 120GB, 240GB, 480GB, 4 capacities available to choose from. The sequential read/write speed is up to 500 and 400 MB/s. It not only greatly improves the performance of the computer, but also the best bargain for upgrading your desktop computer or laptop. Solid, durable and total protection L5 LITE solid state drive is using flash memory chip, which is durable, shockproof, fall resistance and offers total protection. Even if you accidentally drop your laptop or it landed on a hard surface, it can still prevent damages and data corruption from accidents. Perfect and effective operation for prolonging the service life L5 LITE solid state drive supports the Windows TRIM optimization command which is able to release unused space (Free Blocks) to be used for system writes immediately. This can speed up the transfer and write performance of the SSD, and also effectively reduces performance degradation and depletion chances. It perfectly maintains the effective operation and prolongs the service life of the SSD. Trustworthy and reliable L5 LITE solid state drive s built-in smart algorithm management mechanism has functions such as garbage collection, which is able to ensure operation efficiency and prolong the service life of the SSD. Meanwhile, the powerful Wear-Leveling technology and ECC (Error Correction Code) function can enhance the reliability of data transfer. 1
2. Main Features 4x faster than a HDD:Injects vitality into the system. High performance:read speeds up to 500 MB/s to boost overall system responsiveness and performance. Slim form factor:2.5-inch drive available in 7mm to fit in more systems (even slimmer notebooks Supports S.M.A.R.T.:Monitors the status of your drive Supports TRIM:Maintains maximum performance of compatible operating systems Guaranteed:3-year warranty and free technical support 3. Product Specification Model Item L5 LITE Specification Interface SATA Rev. 3.0 (6Gb/s) with backwards compatibility to SATA Rev. 2.0 Capacity Voltage 60 / 120 / 240 / 480GB* DC 5V Operation Temperature 0 C ~ 70 C Performance Dimensions Humidity Vibration Shock MTBF ATTO / Crystal Disk Mark: 60GB Read: Up to 500MB/s Max ; Write: 100MB/s ** 120GB Read: Up to 500MB/s Max ; Write: 300MB/s ** 240GB Read: Up to 530MB/s Max ; Write: 400MB/s ** 480GB Read: Up to 530MB/s Max ; Write: 420MB/s ** IOPS: 600GB 4K Random Read/Write: 30K/25K IOPS max** 120GB 4K Random Read/Write: 30K/40K IOPS max** 240GB 4K Random Read/Write: 65K/70K IOPS max** 480GB 4K Random Read/Write: 70K/70K IOPS max** 100 x 69.9 x 7 mm 0 C to 55 C / 5% ~ 95% RH,non-condensing 20G (non-operating) 1500G 1,000,000 hours System Requirements Windows 10 / 8 / 7 / Vista, MAC OS 10.4 or later, Linux 2.6.33 or later *** Warranty 3-year limited warranty Notes: *1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes / 1024 / 1024 / 1024 = 0.93GB **Transmission speed will vary according to different hardware / software conditions, therefore the data can only used for basic reference. ***Desktop or notebook computer with a SATA III interface We reserve the right to modify product specifications without prior notice. 2
4. Controller Block Diagram 5. Electrical Specifications 5.1 Pin Assignment and Descriptions: Pin Number S1 Function S2 A+(Differential Signal Pair A) S3 A-(Differential Signal Pair A) S4 S5 B-(Differential Signal Pair A) S6 B+(Differential Signal Pair A) S7 3
5.2 Supply Voltage: Pin Number Function P1 3.3V P2 3.3V P3 DEVSLP P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 Item 5V pre-charge 5V 5V Reserved Not Used (12V pre-charge) Not Used (12V) Not Used (12V) Allowable voltage 5.0V +/- 5% Allowable noise / ripple 5.3 Power Consumption: 100mV p-p or less Requirements Capacity Idle Sleep Read Write Unit 60GB 0.27 0.27 1.22 2.03 W 120GB 0.28 0.28 1.28 3.18 W 240GB 0.3 0.3 1.44 3.20 W 480GB 0.3 0.3 1.42 3.42 W 4
6. Supported Command Sets 6.1 ATA Feature Command Sets: The SSD supports all the mandatory ATA commands defined in ATA/ATAPI 7 specification. The supported command sets are listed as below: 48 bit Address Feature Set Feature Set Advanced Power Management(APM) Feature Set Device Configuration Overlay(DCO) Extended Power Conditions (EPC) General Feature Set General Purpose Logging(GPL) Feature Set Host Protected Area(HPA) Feature Set Long Logical Sector (LLS) Feature Set non 512 Native Command Queuing(NCQ) Feature Set Power Management Feature Set Power up In Standby(PUIS) Feature Set Sanitize Device Feature Set Security Feature Set S.M.A.R.T Feature Set Software Setting Preservation(SSP) Feature Set Trusted Computing Feature Set Write Read Verify Feature Set 5
6.2 Identify Device: The SSD responds to ATA IDENTIFY DEVICE command with a pre-defined string of Information on features, hardware and firmware revision information, and functionality support indicators. Many portions of the IDENTIFY DEVICE response string are configurable at manufacturing time via the Config Drive Unique SCT diagnostic command. 6
7. Mechanical Dimension 7
8. Product Ordering Number The ordering number rule is as below: T 25 3 5T XXXX 0 C TEAM 2.5" STD SATAIII 7+15PIN L5 LITE 60G: 60GB 120G: 120GB 240G: 240GB 480G: 480GB Model Name Capacity Description T2535T060G0C101 60GB TEAM 2.5" STD SATA3 L5 LITE 7mm 60GB RETAIL T2535T120G0C10 120GB TEAM 2.5" STD SATA3 L5 LITE 7mm 120GB RETAIL T2535T240G0C10 240GB TEAM 2.5" STD SATA3 L5 LITE 7mm 240GB RETAIL T2535T480G0C10 480GB TEAM 2.5" STD SATA3 L5 LITE 7mm 480GB RETAIL NA C: 0 C - 70 C 8