DVD VIDEO / SACD PLAYER DVP 720SA

DVD VIDEO / SACD PLAYER DVP 720SA 01-34 DVP720_AP2 1 28/07/2004, 3:28 PM

General Information Environmental Information All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES. CAUTION (WARNING LOCATION: ON THE BACKPLATE OF THE SET) NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. Important Note: Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer. DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license. For Customer Use: Read carefully the information located at the bottom of your DVD VIDEO player and enter below the Serial No. Retain this information for future reference. Model No. DVD VIDEO 720SA Serial No. LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mw (DVD) 10 mw (VCD/CD) 60 degree 01-34 DVP720_AP2 2 28/07/2004, 3:28 PM

Index --------------------------------------- 6 -------------------------------- 35 -------------------------------- 65 Bahasa Melayu --------------------------- 95 Bahasa Melayu DTS, and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. Dolby, Pro-Logic and the double-d symbol are trademarks of Dolby Laboratories. Manufactured Due to the inconsistency under license of disc formats from Digital Theater provided Systems, by various inc. disc US manufacturers, Pat. No. your 5,451,942 DVD system and may require other worldwide a playability patents enhancement or upgrade. As DVD technology issued and pending. DTS and DTS advances, these enhancements will become Digital common Surround and will be are easy trademarks to complete. of Digital Go to www.p4c.philips.com Theater Systems, Inc. for 1996 software Digital Theater upgrade. Systems, Inc. All rights reserved. 3 01-34 DVP720_AP2 3 28/07/2004, 3:28 PM

Contents 4 Introduction Supplied accessories... 5 Care and safety information... 5 Connections Connecting TV... 6-7 Using Composite Video jacks (CVBS)... 6 Using S-Video jack... 6 Using Component Video jacks (Pr Pb Y)... 7 Using an accessory RF modulator... 7 Connecting the power cord... 8 Optional: Connecting to a Multi-channel Receiver... 8 Receiver has a Dolby Digital or DTS decoder... 8 Optional : Connecting to an Audio System... 9 Stereo system has Dolby Pro Logic or Right / Left Audio In jack... 9 Optional: Connecting Digital AV Receiver... 9 Receiver has a PCM, Dolby Digital, or MPEG2 decoder... 9 Functional Overview Front and Rear Panels... 10 Remote Control... 11 Getting Started Step 1: Inserting batteries into the Remote Control... 12 Using the Remote Control to operate the Player... 12 Step 2: Setting up the TV... 12-13 To deactivate Progressive manually... 12-13 Selecting the colour system that corresponds to your TV... 13 Step 3: Setting language preference... 14 Setting the OSD Language... 14 Setting the Audio, Subtitle and Disc menu language... 14 Step 4: Setting the speakers channels... 15 Disc Operations Playable Discs... 16 Region Codes... 16 Playing discs... 16 Basic playback controls... 17 Selecting various repeat/shuffle functions.. 17 Repeat play mode... 17 Repeating a section within a chapter/track... 17 Operations for video playback... 18 Using the Disc Menu... 18 Zooming in... 18 Resuming playback from the last stopped point... 18 Using the OSD menu... 18 Special DVD features... 19 Playing a Title... 19 Camera Angle... 19 Changing the Audio Language... 19 Subtitles... 19 Special VCD & SVCD Features... 19-20 Playback Control (PBC)... 19 Preview Function... 20 Playing MP3/DivX/MPEG-4/JPEG/Kodak Picture CD... 20-21 General Operation... 20 Selecting a folder and track/file... 21 Playing Super Audio CD (SACD)... 21 Special picture disc features... 22 Preview Function... 22 Zoom picture... 22 Playback with multi-angles... 22 Scan Effect... 22 Playing MP3 music and JPEG picture simultaneously... 22 DVD Menu Options General Setup menu... 23-24 Locking/Unlocking the disc for viewing... 23 Dimming system s display screen... 23 Programming disc tracks...23-24 Screen Saver - turning on/off... 24 DivX(R) VOD registration code... 24 Audio Setup Menu... 24-25 Digital Audio Setup... 25 Setting the analogue output... 25 Speaker Setup... 25 CD Upsampling... 25 Night Mode - turning on/off... 26 Video Setup Menu... 26-27 TV Type... 26 Setting the TV Display... 26 Progressive - turning on/off... 27 Picture Setting... 27-28 Preference Page... 28-29 Audio, Subtitle, Disc Menu... 28 Restricting playback by Parental Control... 29 PBC... 29 MP3/JPEG Menu - turning on/off... 29 Changing the Password... 30 Setting the DivX Subtitle... 30 Restoring to original settings... 30 Specifications... 31 Troubleshooting... 32 33 Glossary...34 01-34 DVP720_AP2 4 28/07/2004, 3:28 PM

PREVIEW MUTE DIM SLEEP SOUND SURROUND General Information Supplied accessories Video cable (yellow) Audio cable (white, red) Remote Control and two AA batteries Avoid high temperatures, moisture, water and dust Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) Avoid condensation problem The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates. Do not block the vents Do not operate the DVD Player in an enclosed cabinet, allow about 2.5 cm (1 inches) of free space all around the player for adequate ventilation. 2.5 cm (1 inches) 2.5 cm (1 inches) PHILIPS 2.5 cm (1 inches) Care and safety information Power consumption Check that the operating voltage indicated on the typeplate (or beside the voltage selector) is identical to the voltage of your local power supply. If not, please consult your dealer. When the system is switched to Standby mode, it is still consuming power. To disconnect the system from the power supply completely, remove the AC power plug from the wall jack. Care of the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Finding a suitable location Place the player on a flat, hard, and stable surface. Disc handling To clean a CD, wipe it in a straight line from the center towards the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Write only on the printed side of a CDR(W) and only with a soft felttipped pen. Handle the disc by its edge, do not touch the surface. 5 01-34 DVP720_AP2 5 28/07/2004, 3:28 PM

COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT VIDEO IN U (Pb/Cb) Y COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT VIDEO IN U (Pb/Cb) Y Connections Connecting TV COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN Y COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN Y 1 2 1 2 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y L L DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y L L COAXIAL OPTICAL S-VIDEO Pr Pb R STEREO R COAXIAL OPTICAL S-VIDEO Pr Pb R STEREO R IMPORTANT! You only need to make one video connection from the following options, depending on the capabilities of your TV system. Connect the DVD system directly to the TV. Using Composite Video jacks (CVBS) 1 Use the composite video cable (yellow) to connect the DVD Player s CVBS (VIDEO) jack to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the TV (cable supplied). 2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied). IMPORTANT! S-Video connection provides better picture quality. This option must be available on your TV. Using S-Video jack 1 Use the S-video cable to connect the DVD system s S-VIDEO OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV (cable not supplied). 2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied). 6 01-34 DVP720_AP2 6 28/07/2004, 3:28 PM

COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT VIDEO IN U (Pb/Cb) Y Connections RF coaxial cable to TV 2 COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN INT IN TO TV VIDEO IN Back of RF Modulator (example only) AUDIO IN R L Y CH3 CH4 1 2 Antenna or Cable TV signal 1 DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y L DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y COAXIAL OPTICAL S-VIDEO Pr Pb R STEREO COAXIAL OPTICAL S-VIDEO Pr Pb L R STER IMPORTANT! Component Video connection provides higher picture quality. This option must be available on your TV. The progressive scan video quality is only possible through Component Video (Y Pb Pr) output. Using Component Video jacks (Y Pb Pr) 1 Use the component video cables (red/ blue/ green) to connect the DVD system s Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb Pr) on the TV (cable not supplied). 2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied). IMPORTANT! If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator 1 Use the composite video cable (yellow) to connect the DVD Player s CVBS jack to the video input jack on the RF modulator. 2 Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV s RF jack. 7 01-34 DVP720_AP2 7 28/07/2004, 3:28 PM

AUDIO OUT S-VIDEO IN VIDEO IN COMPONENT VIDEO IN V (Pr/Cr) U (Pb/Cb) Y ~ AC MAINS Connections Connecting the power cord Optional: Connecting to a Multichannel Receiver AV Receiver MULTICHANNEL AUDIO IN FRONT CENTER REAR R R L L FRONT SUBW. REAR DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y Y CENTRE L L L R R R COAXIAL OPTICAL S-VIDEO Pr Pb Pr Pb STEREO FRONT SUB- WOOFER REAR After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, NO DISC may appear on the display panel. NO DISC OPEN/CLOSE STOP PLAY/PAUSE Receiver has a Dolby Digital or DTS decoder 1 Select one of the video connections (CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV. 2 Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input sockets on your Receiver (cable supplied). 3 Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied). 4 Set the DVD Player s Analog Output to Multichannel to enable playback of DVDs recorded in Multi-channel. (see page 25 Setting the analogue output ). Helpful Hint: If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected directly to the subwoofer. 8 01-34 DVP720_AP2 8 28/07/2004, 3:28 PM

Connections Optional: Connecting to an Audio System Optional: Connecting Digital AV Receiver STEREO OPTICAL AUDIO IN OPTICAL AUDIO IN AV Receiver DIGITAL DIGITAL OR Y CENTRE DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y L L L R R R Pb STEREO FRONT SUB- WOOFER REAR COAXIAL OPTICAL S-VIDEO Pr Pb Stereo system has Dolby Pro Logic or Right / Left Audio In jack 1 Select one of the video connections (CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV. 2 Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied). Receiver has a PCM, Dolby Digital, or MPEG2 decoder 1 Select one of the video connections (CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV. 2 Connect the COAXIAL or OPTICAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). 3 Set the DVD Player s Analog Output to Stereo which delivers sound from only the two front speakers and subwoofer. (see page 25 Setting the analogue output ). Helpful Hints: Some DVDs are copy protected. You connot record the disc through a VCR or digital recording device. If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. 9 01-34 DVP720_AP2 9 28/07/2004, 3:28 PM

IR Functional Overview Front and Rear Panels STANDBY-ON B To switch the DVD Player to Standby mode or ON Disc tray OPEN/CLOSE / Open/Close the disc tray Display Shows the current status of the DVD Player IR Sensor Point the remote control towards this sensor 9 STOP To stop playback T NEXT To search or select next chapter or track 2; PLAY/PAUSE To start or interrupt playback PREV S To search or select previous chapter or track Multichannel and Progressive Scan LED Led ON in Multichannel or Progressive Scan mode Mains (AC Power Cord) Connect to a standard AC outlet COAXIAL (Digital audio out) Connect to coaxial AUDIO input of a digital audio equipment OPTICAL (Digital audio out) Connect to optical AUDIO input of a digital audio equipment S-Video Out Connect to S-Video input of a TV CVBS (VIDEO Out) Connect to CVBS Video input of a TV Multichannel Audio Out Center speaker, subwoofer, front and rear speakers multichannel connection Audio Out (Left/Right) Connect to AUDIO inputs of an amplifier, receiver or stereo system YPbPr Connect to YPbPr input of a TV DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital CVBS Y CENTRE L L L COAXIAL OPTICAL S-VIDEO Pr Pb STEREO FRONT R R SUB- WOOFER REAR R 10 Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 01-34 DVP720_AP2 10 28/07/2004, 3:28 PM

Functional Overview Remote Control RETURN To go back to previous menu DISC MENU Enters or exits the disc contents menu Switches on or off the playback control mode (for VCD version 2.0 only) 1 2 3 4 Selects an item in the menu/ fast forward/backward, slow forward/ backward OK Acknowledge menu selection PREVIEW MUTE POWER B To switch the DVD player to standby mode or ON 0-9 numerical key pad Selects numbered items in a menu DISPLAY Displays information on TV screen during playback SYSTEM MENU Access or exit DVD Player s system menu S To search or select previous chapter or track DIM SLEEP SOUND SURROUND T To search or select next chapter or track STOP ( 9 ) To stop playback PLAY ( B ) To start playback PAUSE ( ; ) To pause playback temporarily / frame-by-frame playback REPEAT Selects various repeat modes REPEAT (A-B) Repeats playback a specific section on a disc PREVIEW To preview the content of a track or whole disc MUTE Disables or enables sound output SUBTITLE To access subtitle language system menu ANGLE Selects a DVD camera angle ZOOM Enlarge a picture on the TV screen AUDIO To access audio language system menu DIM Selects different levels of brightness for display panel SLEEP Sets the sleep timer function. SOUND Selects a sound effect. SURROUND Selects multichannel surround or stereo mode. Helpful Hint: Press STOP for about 2 seconds to OPEN or CLOSE disc tray. 11 01-34 DVP720_AP2 11 28/07/2004, 3:28 PM

IR Getting Started Step 1: Inserting batteries into the Remote Control 1 2 3 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover. Using the Remote Control to operate the Player 1 Aim the Remote Control directly at the remote sensor (ir) on the front panel. 2 Do not put any objects between the Remote Control and the DVD Player while operating the DVD Player. Step 2: Setting up the TV IMPORTANT! Make sure you have completed all the necessary connections. (See pages 6-7 Connecting TV ). 1 Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the TV. Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV Remote Control may have a button or switch that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. 2 If you are using external equipment, (eg. audio system or receiver), turn it on and select the appropriate input source for the DVD Player output. Refer to the equipment owner s manual for detail. CAUTION! Remove batteries if they are exhausted or if the Remote Control is not being used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed properly. PREVIEW MUTE To deactivate Progressive manually The progressive scan display present 60 complete frames per seconds, rather than 30 frames per second of interlaced scanning (ordinary normal TV system). With nearly double the number of line, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edge on moving objects. To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV is required. To activate progressive function, refer to Progressive - turning on/off on page 27. 12 01-34 DVP720_AP2 12 28/07/2004, 3:28 PM

Getting Started To deactivate Progressive manually - cont d If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below: 1 Press STANDBY ON on the front panel to switch on the DVD player. 2 Press OPEN/CLOSE on the front panel to open the disc tray. 3 Press 1 then, press MUTE on the remote control. You should see the Philips DVD background screen on the TV. Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. - - VIDEO SETUP PAGE - - 4 Press 34 to highlight one of the options below: PAL Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. 5 Select an item and press OK. Helpful Hints: Before changing the current TV Standard setting, ensure that your TV supports the selected TV Type system. If there is no proper picture on your TV, wait for 15 seconds for auto recovery. CHANGING PAL TO NTSC 1. ENSURE THAT YOUR TV SYSTEM SUPPORTS NTSC STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER. TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL COMPONENT PAL NTSC MULTI OK Cancel CONFIRM AGAIN TO USE NEW TV TYPE SETTING. OK Cancel 1 Press SYSTEM MENU. 2 Press 2 repeatedly to select {VIDEO SETUP PAGE}. 3 Press 34 to highlight {TV TYPE}, then press 2. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 13 01-34 DVP720_AP2 13 28/07/2004, 3:28 PM

Getting Started Step 3: Setting language preference You can select your own preferred language settings.this DVD Player will automatically switch to the language for you whenever you load a disc. Setting the OSD Language Setting the Audio, Subtitle and Disc menu language You can choose your own preferred language or soundtrack from audio, subtitles and disc menu languages. If the language selected is not available on the disc, the disc s default language will be used instead. The On-screen language for the system menu will remain as you set it, regardless of various disc languages. - - GENERAL SETUP PAGE - - DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER DivX(R) VOD CODE ENGLISH CHINESE FRENCH SPANISH PORTUGUESE 1 Press SYSTEM MENU. 2 Press 2 to select {GENERAL SETUP PAGE}. 3 Press 34 to highlight {OSD LANGUAGE}, then press 2. 4 Press 34 to select a language and press OK. AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV PASSWORD DivX SUBTITLE - - PREFERENCE PAGE - - ENGLISH CHINESE FRENCH SPANISH PORTUGUESE POLISH ITALIAN 1 Press STOP twice then, press SYSTEM MENU. 2 Press 2 repeatedly to select {PREFERENCE PAGE}. 3 Press 34 to highlight one of the options below at a time, then press 2. Audio (disc s soundtrack) Subtitle (disc s subtitles) Disc Menu (disc s menu) 4 Press 34 to select a language and press OK. If the language you want is not in the list, then select {OTHERS}, then use the numeric keypad (0-9) on the remote to enter the 4-digit language code XXXX (see page 125 {Language Code}) and press OK. 5 Repeat steps 4~5 for other language settings. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 14 01-34 DVP720_AP2 14 28/07/2004, 3:28 PM

Getting Started Step 4: Setting the speakers channels You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. IMPORTANT! The speaker settings only available on Multi-channel audio outputs. You can also press SURROUND button on the remote to select Multi-channel. {SUBWOOFER} ON when a subwoofer is connected. OFF when no subwoofer is connected. {SPEAKER VOLUME} Volume level setting for individual speakers (-6dB ~ +6dB). SPEAKERS VOLUME SETUP FRONT LEFT FRONT RIGHT CENTER SUBWOOFER REAR RIGHT REAR LEFT 0dB 0dB 0dB 0dB 0dB 0dB 1 Press STOP then, press SYSTEM MENU. 2 Press 2 repeatedly to select {AUDIO SETUP PAGE}. 3 Press 34 to highlight {SPEAKER SETUP}, then press 2. - - AUDIO SETUP PAGE - - ANALOG OUTPUT DIGITAL AUDIO SETUP SPEAKER SETUP CD UPSAMPLING NIGHT MODE - - SPEAKER SETUP PAGE - - FRONT SPEAKERS CENTER SPEAKER REAR SPEAKERS SUBWOOFER SPEAKERS VOLUME SPEAKERS DELAY 4 Enter its submenu by pressing 2. 5 Press 34 to highlight one of the options below at a time, then press 2. {FRONT SPEAKERS, CENTER SPEAKER, REAR SPEAKERS} OFF when no speaker is connected. LARGE when connected speakers can produce low frequency signals below 120Hz. SMALL when connected speakers cannot produce low frequency signals below 120Hz. {SPEAKER DELAY} Delay times setting in relation to the listening position/ distance for centre and surround speakers (1m ~ 10m). SPEAKERS DISTANCE SETUP CENTER REAR LEFT REAR RIGHT 0 M 0 M 0 M 6 Press 1 2 to adjust the setting that best suit your surround sound needs. 7 Press OK to confirm. Helpful Hints: Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. The test tone will be automatically generated to help you judge the sound level of each speaker. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 15 01-34 DVP720_AP2 15 28/07/2004, 3:29 PM

Disc Operations IMPORTANT! If the inhibit icon (ø or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. Depending on the DVD or VIDEO CD, some operations may be different or restricted. Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. Playable Discs Your DVD Player will play: Digital Versitale Discs (DVDs) Video CDs (VCDs) Super Video CDs (SVCDs) Super Audio CDs (SACDs) Digital Versitale Discs + Recordable [Rewritable] (DVD+R[W]) Compact Discs (CDs) MP3 discs, picture (Kodak, JPEG) files on CD-R(W). JPEG/ISO 9660 format Maximum 30 characters display. Supported sampling frequencies : 32 khz, 44.1 khz, 48 khz (MPEG-1) 16 khz, 22.05 khz, 24 khz (MPEG-2) Supported Bit-rates : 32~256 kbps (MPEG-1), 8~160 kbps (MPEG-2) variable bitrates MPEG-4 disc on CD-R(W): Simple profile Advanced simple profile (640-480) DivX disc on CD-R[W]/DVD+R[W]: DivX 3.11, 4.x and 5.x GMC (Global Motion Compensation) and QP (Quarter Pixel) not supported. SUPER VIDEO Region Codes DVD discs must be labeled for ALL ALL regions or Region 3 in order to play on this Player. You cannot play Discs that are labeled for other 3 regions. Helpful Hints: It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or condition of the recording. If you are having trouble playing a certain disc, remove the disc and try a different one. Improper formatted disc will not play on this DVD Player. Playing discs 1 Connect the power cords of the DVD Player and TV (and any optional stereo or AV receiver) to a power outlet. 2 Turn on the TV power and set to the correct Video In channel. (See page 12 Setting up the TV ). 3 Press STANDBY-ON on the DVD Player front panel. You should see the Philips DVD background screen on the TV. 4 Press OPEN CLOSE 0 button to open the disc tray and load in a disc, then press the same button again to close the disc tray. Make sure the label side is facing up. For double-sided discs, load the side you want to play facing up. 5 Playback will start automatically. If not press PLAY B. If a disc menu appears on the TV, see page 18 Using the Disc Menu. If the disc is locked by parental control, you must enter your six-digit password. (See page 30). 16 TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 01-34 DVP720_AP2 16 28/07/2004, 3:29 PM

Disc Operations Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback 1 During playback, press Å. Playback will pause and sound will be muted. 2 Press Å again to select the next picture frame. 3 To resume normal playback, press PLAY B. Selecting track/chapter Press S / T or use the numeric keypad (0-9) to key in a track/chapter number. If repeat mode is active, pressing S / T will replay the same track/chapter. Searching backward/forward Press and hold S / T, then press PLAY B to resume normal playback. While searching, pressing S / T again will decrease/increase the search speed. Selecting various repeat/shuffle functions Repeat play mode While playing a disc, press REPEAT continuously to choose a Play Mode. DVD RPT ONE (repeat chapter) RPT TT (repeat title) SHUFFLE (random play) RPT SHF (repeat shuffle) RPT OFF (repeat off) VCD/SVCD/CD RPT ONE (repeat track) RPT ALL (repeat disc) SHUFFLE (random play) RPT SHF (repeat shuffling) RPT OFF (repeat off) MP3/SACD/DivX RPT FLD (repeat folder) RPT ONE (repeat track) SHUFFLE (random play) RPT OFF (repeat off) Helpful Hint: For VCD, repeat playback is not possible if the PBC mode is switched on. Stopping playback Press Ç. Repeating a section within a chapter/track 1 While playing a disc, press REPEAT A-B at your chosen starting point. 2 Press REPEAT A-B again at your chosen end point. The section A and B can be set only within the same chapter/track. The section will now repeat continuously. 3 To exit the sequence, press REPEAT A-B. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 17 01-34 DVP720_AP2 17 28/07/2004, 3:29 PM

Disc Operations Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item Use 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback. To access or remove the menu Press DISC MENU on the remote. Zooming in This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture with different scales. Use 1 2 3 4 keys to pan through the enlarged picture. Playback will continue. 2 Press ZOOM repeatedly to return to the original size. Resuming playback from the last stopped point Resume playback of the last 10 discs is possible, even if the disc was ejected or the power switched off. Load one of the last 10 discs. LOADING appears. Press PLAY B and the disc will be played back from the last point. Using the OSD menu OSD menu shows the disc playback information (for example, title or chapter number, elapsed playing time, audio/ subtitle language), a number of operations can be done without interrupting disc playback. 1 During playback, press DISPLAY. A list of available disc information appears on the TV screen. Bitrate Bitrate MENU Title 02/14 Chapter 02/14 AUDIO 5.1CH SUBTITLE 02/14 ANGLE 1/1 TT Time 0:56:14 CH Time 0:07:02 REPEAT OFF Time Disp. TITLE ELAPSED MENU Track 02/14 Disc Time 0:49:17 Track Time 0:03:43 REPEAT OFF Tune Disp. TOTAL ELAPSED 2 Press 34 to view the information and press OK to access. 3 Use the numeric keypad (0-9) to input the number/time or press 34 to make the selection, then press OK to confirm. Playback will change to the chosen time or to the selected title/chapter/ track. To cancel resume mode In stop mode, press STOP 9 again. 18 TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 01-34 DVP720_AP2 18 28/07/2004, 3:29 PM

Disc Operations Special DVD Features Playing a Title 1 Press DISC MENU. The disc title menu appears on the TV screen. 2 Use 341 2 keys or numeric keypad (0-9) to select a play option. 3 Press OK key to confirm. Camera Angle Press ANGLE repeatedly to select different desired angle. Special VCD & SVCD Features Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only) Press DISC MENU to toggle between PBC ON and PBC OFF. If you select PBC ON, the disc menu (if available) will appear on the TV. Use the S / T or the numeric keypad (0-9) to select a play option. During playback, pressing RETURN will return to the menu screen (if PBC is on). Changing the Audio Language For DVD Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel For VCD Press AUDIO to select the available audio channels provided by the disc (LEFT VOCAL, RIGHT VOCAL, MONO LEFT, MONO RIGHT, STEREO). Subtitles Press SUBTITLE repeatedly to select different subtitle languages. If you want to skip the index menu and playback directly from the beginning, Press DISC MENU key on the remote control to switch to PBC off. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 19 01-34 DVP720_AP2 19 28/07/2004, 3:29 PM

Disc Operations Preview Function 1 Press PREVIEW. 2 Press 34 to highlight {TRACK DIGEST}, {DISC INTERVAL} or {TRACK INTERVAL}. 3 Press OK to open one option. SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL Track Digest This function will minimise the picture of every track in order to display every six of these tracks on the screen to help you know the content of every track on the disc. Disc Interval This function is used to divide a disc into six parts by regular intervals and display them on one page to preview the whole disc. Track Interval This function is used to divide a single track into six parts by regular intervals and display them on one page to help you preview the selected track. A B C D E F (example for 6 thumbnail pictures display) 4 Use 1 2 3 4 keys to select a track or use numeric keypad (0-9) to input the selected track number next to {SELECT}. 5 Press S / T to open the previous or next page. 6 Press OK to confirm. To quit preview function Use 1 2 3 4 keys to highlight {EXIT} and press OK to confirm. To return to preview menu Use 1 2 3 4 keys to highlight {MENU} and press OK to confirm. For CD At stop mode, press PREVIEW on the remote control. Each track will be played for a few seconds. For JPEG CD, press PREVIEW to view 12 thumbnail pictures on the TV screen (see page 22). Playing MP3/DivX/MPEG-4/ JPEG/Kodak Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 12 Setting up the TV ). General Operation 1 Load a disc. The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. The data disc menu appears on the TV screen. 2 Playback will start automatically. If not press PLAY B. 00:00 00:00 001/020 Coco Lee MP3 Coco - Before MP3 Coco - I love MP3 Coco - Jazz MP3 Coco - Hot spring TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 20 01-34 DVP720_AP2 20 28/07/2004, 3:29 PM

Disc Operations Selecting a folder and track/file 1 Press 34 to select the folder and press OK to open the folder. 2 Press 34 to select a track/file. 3 Press OK to confirm. Playback will start from the selected file to the end of the folder. During playback, you can; Press S / T to select another track/ file in the current folder. To select another folder from the current disc, press 1 to return to the root menu, then press 34 to make your selection and press OK to confirm. Press REPEAT continuously to access different Play Mode. FOLDER: files will be played back once. REPEAT ONE: one file being played repeatedly. REPEAT FOLDER: all files in one folder being played repeatedly. SHUFFLE: all files in the current folder being played at random order. Press Å to pause playback. Playing Super Audio CD (SACD) There are three types of SACD discs: single layer, double layer or hybrid disc. The hybrid disc contains both Super Audio CD and standard audio CD layers, only the SACD layer is possible to playback on this DVD player. 1 Load a SACD. The disc menu appears on the TV screen. 2 Playback will start automatically. If the SACD consists of multi-channel and stereo tracks, multi-channel tracks will have the priority for playback. To playback stereo tracks, use 3 4 keys to make your selection from the disc menu, then press PLAY B. Helpful Hints: SURROUND button is not functional for SACD playback. You have to access to the disc menu in order to select between multichannel and stereo tracks. Programme SACD tracks is not possible. Helpful Hints: It may not be possible to play certain MP3/JPEG/DixV/MPEG-4 disc due to the configuration and characteristics of the disc or condition of the recording. It is normal to experience an occasional skip while listening to your MP3 disc. It is normal to experience an occasional pixelation during MPEG-4/DivX playback due to poor clarity of digital contents during internet downloading. For multi-session discs with different formats, only the first session will be available. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 21 01-34 DVP720_AP2 21 28/07/2004, 3:29 PM

Disc Operations Special picture disc features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 12 Setting the TV ). Zoom picture 1 During playback, press ZOOM repeatedly to display the picture with different scales. 2 Use 1 2 3 4 keys to view the zoomed picture. Load a Picture disc (Kodak Picture CD, JPEG). For Kodak disc, the slide show will begin. For JPEG disc, the picture menu appears on the TV screen. Press B to start the slide-show playback. Preview Function (JPEG) This function shows the content of the current folder or the whole disc. 1 Press STOP during playback. 12 thumbnail pictures will appear on the TV screen. 2 Press S / T to display the other pictures on the previous/next page. 3 Use 1 2 3 4 to highlight one of the picture and press OK to start playback 4 Press DISC MENU to return to Picture CD menu. Playback with multi-angles During playback, press 3 4 1 2 to rotate the picture on the TV screen. 3: flip the picture vertically 4: flip the picture horizontally 1: rotate the picture anti-clockwise 2: rotate the picture clockwise Scan Effect Press ANGLE repeatedly to choose different scan effect. Various scan effect appears on the top left hand corner on the TV screen. Playing MP3 music and JPEG picture simultaneously 1 Load a disc that contains music and picture. The disc menu appears on the TV screen. 2 Select an MP3 track. 3 During MP3 music playback, select a picture from the TV screen and press PLAY B. The picture files will be played back one after another until end of the folder. 4 To quit simultaneous playback, press DISC MENU followed by Ç. Helpful Hint: Some files on Kodak or JPEG disc may be distorted during playback due to the configuration and characteristics of the disc. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 22 01-34 DVP720_AP2 22 28/07/2004, 3:29 PM

DVD Setup Menu Options This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. General Setup menu 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select General Setup icon. 3 Press OK to confirm. Dimming player s display panel You can select different levels of brightness for the display screen. 1 In GENERAL SETUP PAGE, press 34 to highlight {DISPLAY DIM}, then press 2. 100% Select this for full brightness. 70% Select this for medium brightness. 40% Select this for dimming the display. 2 Press 34 to select a setting, then press OK to confirm your selection. - - GENERAL SETUP PAGE - - DISC LOCK DISPLAY DIM PROGRAM OSD LANGUAGE SCREEN SAVER DivX(R) VOD CODE Programming disc tracks (not for Picture CD/MP3/SACD) You can play the contents of the disc in the order you want by programming the tracks to be played. Up to 20 tracks can be stored. Locking/Unlocking the disc for viewing Not all discs are rated or coded by the disc maker. You can prevent a specific disc from playing by locking the disc. Up to 40 discs can be locked. 1 In GENERAL SETUP PAGE, press 34 to highlight {DISC LOCK}, then press 2. LOCK Select this to block the playback of the current disc. Subsequent access to a locked disc requires six-digit password. The default password is 136 900 (see page 30 Changing the password ). UNLOCK Select this to unlock the disc and allow future playback. 2 Press 34 to select a setting, then press OK to confirm your selection. 1 In GENERAL SETUP PAGE, press 34 to highlight {PROGRAM}, then press 2 to select {INPUT MENU}. 2 Press OK to confirm. 01 04 01 10 03 11 04 05 Program : Track (01-17) 01 01 03 04 05 EXIT START NEXT To input your favourite tracks/chapter 3 Use the numeric keypad (0-9) to enter a valid track/chapter number. 4 Use 1 2 3 4 keys to move the cursor to the next position. If the track number is more than ten, press T to open the next page and proceed with programming or, Use 1 2 3 4 keys to highlight {NEXT} on the programme menu, then press OK. 5 Repeat steps 3~4 to input another track/chapter number. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 23 01-34 DVP720_AP2 23 28/07/2004, 3:29 PM

DVD Setup Menu Options If you want to remove a track 6 Use 1 2 3 4 keys to move the cursor to the track you want to remove. 7 Press OK to remove this track from the programme menu. To start programme playback 8 Use 1 2 3 4 keys to highlight {START} on the programme menu, then press OK. Playback will start with the selected tracks under the programmed sequence. To exit programme playback 9 Use 1 2 3 4 keys to highlight {EXIT} on the programme menu, then press OK. OSD Language This menu contains various language options for display language on the screen. For details, see page 14. Screen Saver - turning on/off The screen saver will help to prevent your TV display device from becoming damaged. 1 In GENERAL SETUP PAGE, press 34 to highlight {SCREEN SAVER}, then press 2. DivX(R) VOD registration code Philips provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit us at www.divx.com/vod. 1 In GENERAL SETUP PAGE, press 34 to highlight {DIVX(R) VOD CODE}, then press 2. The registration code will appear. 2 Press OK to exit. 3 Use the registration code to purchase or rent the videos from DivX VOD service at www.divx.com/vod. Follow the instructions and download the video onto a CD-R for playback on this DVD player. Helpful Hints: All the downloaded videos from DivX VOD can only be played back on this DVD player. Time search feature is not available during DivX movie playback. Audio Setup Menu ON Select this if you wish to turn off the TV screen when disc playback is stopped or paused for more than 15 minutes. OFF Select this to disable the screen saver function. 2 Press 34 to select a setting, then press OK to confirm your selection. 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select Audio Setup icon. 3 Press OK to confirm. - - AUDIO SETUP PAGE - - ANALOG OUTPUT DIGITAL AUDIO SETUP SPEAKER SETUP CD UPSAMPLING NIGHT MODE 24 TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 01-34 DVP720_AP2 24 28/07/2004, 3:30 PM

DVD Setup Menu Options Digital Audio Setup The options included in Digital Audio Setup are: Digital Output and LPCM Output. 1 In AUDIO SETUP PAGE, press 34 to highlight {DIGITAL AUDIO SETUP}, then press 2. 2 Press the 34 keys to highlight an option. 3 Enter its submenu by pressing 2. 4 Move the cursor by pressing the 34 keys to highlight the selected item. Digital Output Set the Digital output according to your optional audio equipment connection. Off: Turn off the digital output. All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver. PCM Only: Only if your receiver is not capable of decoding multi-channel audio. Helpful Hint: If DIGITAL OUTPUT is set to All, all audio settings except MUTE are invalid. You cannot hear or record the SACD playback if you use the digital connection. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust LPCM Output. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48kHz: Playback a disc recorded at the sampling rate of 48kHz. 96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic mode. Helpful Hint: LPCM Output can be selected only when PCM Only is activated. Setting the analogue output Set Analogue Output to match your DVD Player s playback capability. This function can also be accessed via the SURROUND button on the remote. 1 In AUDIO SETUP PAGE, press 34 to highlight {ANALOG OUTPUT}, then press 2. STEREO Select this to change channel output to stereo which delivers sound from only the two front speakers and subwoofer. MULTI-CHANNEL Select this to enable Multi-channel output. 2 Press 34 to select a setting, then press OK to confirm your selection. Speaker Setup This menu contains setup options for your audio output which makes the speaker setup system reproduce high quality surround sound. For details, see page 15. CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. 1 In AUDIO SETUP PAGE, press 34 to highlight {CD UPSAMPLING}, then press 2. OFF Select this to disable CD-upsampling. 88.2 khz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.4 khz (X4) Select this to convert the sampling rate of the CDs four times higher than the original. 2 Press 34 to select a setting, then press OK to confirm your selection. Helpful Hint: CD upsampling feature is only applicable to stereo output setting. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 25 01-34 DVP720_AP2 25 28/07/2004, 3:30 PM

DVD Setup Menu Options Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night. TV Type This menu contains the options for selecting the colour system that matches the connected TV. For details, see page 13. 1 In AUDIO SETUP PAGE, press 34 to highlight {NIGHT MODE}, then press 2. ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range. 2 Press 34 to select a setting, then press OK to confirm your selection. Video Setup Menu 1 In disc mode, press SYSTEM MENU. 2 Press 1 2 to select Video Setup icon. 3 Press OK to confirm. - - VIDEO SETUP PAGE - - TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL COMPONENT Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback. 1 In VIDEO SETUP PAGE, press 34 to highlight {TV DISPLAY}, then press 2. 2 Press 34 to highlight one of the options below: 4:3 PAN SCAN Select this if you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX Select this if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 Select this if you have a widescreen TV. 3 Select an item and press OK. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 26 01-34 DVP720_AP2 26 28/07/2004, 3:30 PM

DVD Setup Menu Options Progressive - turning on/off This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks (see page 7). Picture Setting This DVD Player provides three predefined sets of picture colour settings and one personal setting which you can define yourself. 1 In VIDEO SETUP PAGE, press 34 to highlight {PROGRESSIVE}, then press 2. OFF To disable Progressive Scan function. ON To enable Progressive Scan function. 2 Press 34 to select a setting, then press OK to confirm your selection. Helpful Hint: To deactivate the progressive function manually, see page 12. 1 In VIDEO SETUP PAGE, press 34 to highlight {PICTURE SETTING}, then press 2. STANDARD Select this for standard picture setting. BRIGHT Select this will make the TV picture brighter. SOFT Select this will make the TV picture softer. PERSONAL Select this to personalise your picture colour by adjusting the brightness, contrast, tint and colour (saturation). 2 Press 34 to select a setting, then press OK to confirm your selection. 3 If you select {PERSONAL}, then proceed to steps 4~7. The PERSONAL PICTURE SETUP menu appears. PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0 0 0 TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 27 01-34 DVP720_AP2 27 28/07/2004, 3:30 PM

DVD Setup Menu Options 4 Press 34 to highlight one of the following options. BRIGHTNESS Increase the value will brighten the picture or vice versa. Choose zero (0) for average setting. CONTRAST Increase the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast. TINT Increase the value will darken the picture or vice versa. Choose zero (0) for average setting. COLOUR Increase the value will enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour. 5 Press 1 2 to adjust the setting that best suit your personal preference. 6 Repeat steps 4~5 for adjusting other colour features. 7 Press OK to confirm. Preference Page 1 Press Ç twice to stop playback (if any), then press SYSTEM MENU. 2 Press 1 2 to select the Preference Setup icon. 3 Press OK to confirm. AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV PASSWORD DivX Subtitle - - PREFERENCE PAGE - - Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 14. DivX Subtitle (LX390 Standard - default font Cyrillic - subtitle fonts appears on cyrillic. TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU. 28 01-34 DVP720_AP2 28 28/07/2004, 3:30 PM