Cable Identification, Locating, Testing Equipment 77 HP Tracer 2-Tone Generator Permits Fast, Accurate Wire Identification Provides Tone Signal, Continuity, Talk Battery, Line Condition Requires an Inductive Amplifier (Probe) Weather-Resistant, 3-Color LED 24 Test Lead Alligator Clips Polarity Confirmation 77 HP/6A Tone Generator Includes Bent Nose Clips Higher Voltage Protection Increased Talk Battery 77HP HP 2-Tone Generator 77HP/6A HP/6A Tone Generator 200EP Inductive Amplifier (Probe) Permits Wire and Cable Identification without having to make Direct Metallic Contact with the Conductor Used in Conjunction with any Tone Generator Powerful Receiver Gain Permits Accurate Identification 2 Speaker Recessed On/Off Push Button Adjustable Volume Control for Precise Identification Recessed Tabs for Buttset or Headset Connection Plastic Blended-Carbon Tip Reduces Conductivity New LED for Visual Strength Indication 200EP 701K Tone Generator and Probe Kit Consists of 77HP High-Power Tone-Generator, 200EP Inductive Amplifier and Rugged 700C Polyester Carrying Case Popular Kit For Telecom, Datacom, Electrical, Security, HVAC, Audio/Visual and More 701K Filter Probe 3 Types of Noise Filtration Eliminates Power Noise Selectively Filters Out All 60 Hz Harmonics Can be used with any Tone Generator Slim, Comfortable Design For use in Limited Space Areas Recessed On/Off Buttons Adjustable Volume/Sensitivity Normal/Filter Switch Plastic Blended Carbon Tip 701K 77HP/6A 200EP 711K Tone and Probe Kit Professional-Grade Tone and Probe Kit Includes 77GX Tone Generator Includes Inductive Amplifier Microprocessor-Controlled Circuitry 3 Selectable Tone Outputs for use in Testing Multiple Lines Fast-Check, 2-line Polarity Indication Selectable Power Outputs for use on Shorted or Open Pairs Adjustable Volume One-button Operation Rugged Carrying Cases 711K Inductive Amplifier Simple, One-Button Operation Powerful Speaker Comfortable, Ergonomic Design Battery-Operated Ideal for Noisy Environments Improved Tip Design Adjustable Volume Control for Precise Identification Recessed Connectors for use with Telephone Test Sets LED for Visual Signal Strength Indication Speaker Bypass when using Telephone Test Sets Multi-Filter Tone Probe Single button selects two kinds of powerful noise filters Filtering means faster, more accurate pair tracing Digital signal processor for accuracy and sensitivity Durable, light-weight Audible and visible signal detection Continuous, wide-range volume control Butt-set terminals Field replaceable tip, spare tip included Uses a single 9-V battery One probe for many applications Digital LAN Tracing Kit Unique troubleshooting and tracing solution for LANs and other types of VDV wiring The filter probe is designed to eliminate hum from flourescent lights and AC power wiring that can obscure tracing tones The AT8L LAN Toner generates multiple tracing tones and indicates the presence of 10/100Base-T network service 711K Every effort has been made to ensure the integrity of this catalog. Jenne, Inc. cannot be held responsible for any misrepresentation associated with any products due to omissions, typographic errors or misprints. 383
Cable Identification, Locating/Testing Equipment 508S Wire Finder Trace the Path of Energized Circuits in Walls, Underground and in Ceilings Trace Phone, Coaxial, Electrical, Audio Wires Permits Use on Energized, Live 120 V AC Circuits using the AC Outlet Adapter Included 508S 508S Tracker II Locating System Fast, Simple Long-Range Wire Locating Professional Performance at a Reasonable Price Inductive Signal Application-Active/Dead Systems Range of up to 4,000 Feet and Depths of 7 Feet Connects Direct, Inductive Coupler, Inductive Antenna Optional HS-1 Headset Available PE900 Series Test Sets Professional-0Quality Telephone Test Sets T/P Unique Quick-Release Belt Clip Redial Mute Bed-of-Nails and Piercing Pin Clips Flash Test Set 945 Plus Data Lock-Out PE945 Test Set 930 Plus 2-Way, Hands-Free PE930 Basic Test Set Data-safe,Waterproof PE800 Series Tele-Mate Test Sets Ideal for Verifying Quality of a New Wiring Install Tough Plastic Molding Adjustable Volume Built-in Ringer Compact Design Data-Safe Monitor Mode Rugged Belt Clip Telco Style Clips Headset for Hands-Free Operation PE830 Tele-Mate Pro Test Set LCD Display Caller ID with Name Display PE810 Tele-Mate Test Set 468 Modular Cable Tester Identifies Opens, Shorts, Reversals Test 258, T568B,105ASE-T, USOC and T568A Send Tone to Identify Cable at Remote Locations Sequencing Red and Green LEDs Provides Fast, Accurate Results Connects 8 Pin Mod Plug to Transmitter and Receiver PE810 468 468 AT8L LAN Toner 2 Designed for Voice, Data and Mixed Voice/Data systems Digital Interaction with LAN hubs and switches Splittable Tone Connections for tracking LAN cable LAN Hub Detection/Tracking with light Telephone Service Indicator Powered Ethernet/Short-Circuit Check Works in RJ11/RJ45-type jacks Low Battery Indicator AT8L Replacement Plastic Tips Carbon Fiber reduces risk of Shorting Package of 4 (2-pencil, 2-spade) Replacement Metal Tips Nickel-Plated Brass Tips for Maximum Performance Package of 2 Pencil Tips Premium Tone and Probe Kit This Kit Offers all the Features Professionals desire: Consists Of 77HP/6A High-Power Tone-Generator with Piercing Clips, and a Filter Probe Both Units are Housed in a Rugged Woven Polyester Carrying Case AT8 Break-Out Tone Generator Two Test Sets in One Less To Carry Faster Service Calls Simple to Test Any Configuration of Pairs in Both 6 and 8 Position Test Continuity, Polarity, Send Tone and Even Supply Talk Battery Combines Tone Generator and Break-out Adapter Features Modular Plug and Jack in each Unit Selectable Solid/Warble Tone Signal AT8 AT8L AT8 384 www.jenne.com 800-422-6191
Cable Identification, Locating, Testing Equipment 77 HP-G Tracer 2-Tone Generator Permits Fast, Accurate Wire Identification Provides Tone Signal, Continuity, Talk Battery, Line Condition Requires an Inductive Amplifier (Probe) Weather-Resistant, 3-Color LED 24 Test Lead Alligator Clips Polarity Confirmation 77 HP-G/6A Tone Generator Includes Bent Nose Clips Higher Voltage Protection Increased Talk Battery 77HP-G HP 2-Tone Generator 77HP-G/6A HP/6A Tone Generator Inductive Amplifier Simple, One-Button Operation Powerful Speaker Comfortable, Ergonomic Design Battery-Operated Ideal for Noisy Environments Improved Tip Design Adjustable Volume Control for Precise Identification Recessed Connectors for use with Telephone Test Sets LED for Visual Signal Strength Indication Speaker Bypass when using Telephone Test Sets Multi-Filter Tone Probe Single button selects two kinds of powerful noise filters Filtering means faster, more accurate pair tracing Digital signal processor for accuracy and sensitivity Durable, light-weight Audible and visible signal detection Continuous, wide-range volume control Butt-set terminals Field replaceable tip, spare tip included Uses a single 9-V battery One probe for many applications Digital LAN Tracing Kit Unique troubleshooting and tracing solution for LANs and other types of VDV wiring The filter probe is designed to eliminate hum from flourescent lights and AC power wiring that can obscure tracing tones The AT8L LAN Toner generates multiple tracing tones and indicates the presence of 10/100Base-T network service 77HP-G 77HP-G/6A 200EP-G Inductive Amplifier (Probe) Permits Wire and Cable Identification without having to make Direct Metallic Contact with the Conductor Used in Conjunction with any Tone Generator Powerful Receiver Gain Permits Accurate Identification 2 Speaker Recessed On/Off Push Button Adjustable Volume Control for Precise Identification Recessed Tabs for Buttset or Headset Connection Plastic Blended-Carbon Tip Reduces Conductivity New LED for Visual Strength Indication 200EP-G 200EP-G 701K-G Tone Generator and Probe Kit Consists of 77HP High-Power Tone-Generator, 200EP Inductive Amplifier and Rugged 700C Polyester Carrying Case Popular Kit For Telecom, Datacom, Electrical, Security, HVAC, Audio/Visual and More 701K-G Filter Probe 3 Types of Noise Filtration Eliminates Power Noise Selectively Filters Out All 60 Hz Harmonics Can be used with any Tone Generator Slim, Comfortable Design For use in Limited Space Areas Recessed On/Off Buttons Adjustable Volume/Sensitivity Normal/Filter Switch Plastic Blended Carbon Tip 701K-G Designed for the network installation and maintenance professional, the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity lights for fast identification. This kit can be used on any wiring system including datacom, telecom, security/alarm, audio and CATV. Kit includes the AT8L LAN Toner and the Inductive Amplifier in a rugged, woven polyester carrying case. LAN Toner Kit Every effort has been made to ensure the integrity of this catalog. Jenne, Inc. cannot be held responsible for any misrepresentation associated with any products due to omissions, typographic errors or misprints. 401
Cable Identification, Locating/Testing Equipment 402 Tracker II Locating System Fast, Simple Long-Range Wire Locating Professional Performance at a Reasonable Price Inductive Signal Application-Active/Dead Systems Range of up to 4,000 Feet and Depths of 7 Feet Connects Direct, Inductive Coupler, Inductive Antenna Optional HS-1 Headset Available PE900 Series Test Sets Professional-0Quality Telephone Test Sets T/P Unique Quick-Release Belt Clip Redial Mute Bed-of-Nails and Piercing Pin Clips Flash Test Set 945 Plus Data Lock-Out PE945 Test Set 930 Plus 2-Way, Hands-Free PE930 Basic Test Set Data-safe,Waterproof TM-500 3 GLOW Tele-Mate Telephone Test Set TM-500 Luminescent (glow-in-the-dark) keypad Can be used safely on a DSL enabled line High Impedance Monitor for monitoring line without disrupting existing traffic Over voltage and over current protection Tone and Pulse dialing for versatility on old and new phone lines Polarity test with LED indicator 32 digit last number redial and pause 10 number speed dial Adjustable volume control plus mute Pause Flash to generate a timed break recall Line powered, no battery needed Headset (included) for hands free operation RJ11 socket TM-500 Tele-Mate Telephone Test Set Complete telephone set with ringer Phone-to-phone intercom Modular or alligator clip connection Amplified loudspeaker line monitor Headset or handset operation Tone and pulse dialing Large 10-location speed dialing memory Multi-memory redial DTMF digit detection Tone output mode Caller ID with name display Call waiting caller ID Missed call indication DSL compatible Glow-in-the-dark keypad Line voltage and current display High voltage detect and lockout High current detect and lockout TM-700 TM-700 Replacement Plastic Tips Carbon Fiber reduces risk of Shorting Package of 4 (2-pencil, 2-spade) Replacement Metal Tips Nickel-Plated Brass Tips for Maximum Performance Package of 2 Pencil Tips 468 Modular Cable Tester Identifies Opens, Shorts, Reversals Test 258, T568B,105ASE-T, USOC and T568A Send Tone to Identify Cable at Remote Locations Sequencing Red and Green LEDs Provides Fast, Accurate Results Connects 8 Pin Mod Plug to ztransmitter and Receiver 468 NETcat Micro Digital Voice Data & Video Writing Tester Tests shielded twisted pair(stp), unshielded twisted pair (UTP) and coaxial cables TIA/EIA standard wiring pair verification Detects shorts, opens, reversed polarity, crossed and split pairs Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting Tracing modes can be adjusted for high performance LAN cables Complete set of connector types standard (telephone, LANand coax) Nested remote allows end-to-end testing of all wiring types Simple testing of LAN wiring and phone lines Detection of common wiringand connector errors Warning of hazardous voltages Checks for reversed telephone wires NC100 View our searchable electronic catalog at: www.jenne.com 800-422-6191 Premium Tone and Probe Kit This Kit Offers all the Features Professionals desire: Consists Of 77HP/6A High-Power Tone-Generator with Piercing Clips, and a Filter Probe Both Units are Housed in a Rugged Woven Polyester Carrying Case 468 NC100