Use of the application program Product family: Product type: Manufacturer: with red LED cover with white LED cover Functional description Push button Push button, 4-fold Siemens Push button UP 212 titanium white /Ds 5WG1 212-2AB11 Push button UP 212 light bronze /Ds 5WG1 212-2AB61 Push button UP 217 titanium white /Df 5WG1 217-2AB11 Push button UP 217 electric white /Df 5WG1 217-2AB41 Push button UP 212 titanium white /Ds 5WG1 212-2AB12 Push button UP 217 titanium white /Df 5WG1 217-2AB12 Push button UP 217 electric white /Df 5WG1 217-2AB42 The application program 12 S4 Dim, Shu,/off/toggle, Val presel. 240403 makes it possible to assign the following functions to the 4-fold push button with preselection buttons: switching, shutter control, dimming, or preselection display via LEDs. An adjustable brightness value for example can also be recalled directly via the preselection buttons. The function Value preselection can also be used for other applications such as for servomotors or ventilation flaps. Preselection buttons It is possible to send adjustable 8 bit values immediately on operation via preselection buttons. If several preselection buttons are operated at the same time, a value that has been set for this push button combination is sent. Twelve push button combination values can be parameterised. Rocker The rocker can be used for switching, shutter control and cyclical dimming functions. Switch: When the rocker is pressed, the corresponding signal is sent (/Off/Toggle) with no distinction made between a long or short push button action. The signal is therefore already sent when the rocker is pressed. The distinction between whether an or Off signal is sent, is dependent on whether the upper or lower of the rocker has been pressed and which parameters have been assigned. If the rocker is set to Toggle mode, the rocker sends the inverse signal to that of the object after a short push button action. The object and the switch object should therefore be linked. Shutter: A distinction is made between a long and short push button action. After a brief operation of the rocker, a switching telegram is sent which adjusts the louvres or stops the movement of the shutters. After a long push button action, the shutter is either raised or lowered depending on the parameter settings. The distinction between whether an Up or Down command is sent, is dependent on the operation of the rocker (upper or lower ) and the parameter settings. When assigning parameters it is possible to choose Upper : Up, Lower : Down or vice versa. This parameter makes it possible to control skylights and security gates etc. in both directions. In this case the Up command corresponds to the Off command and the Down command corresponds to the command. Dimming: A distinction is made between a long and a short push button action. A brief operation of the rocker sends a corresponding switching command (, Off or Toggle). If the push button is pressed for a longer period (the duration of which can be set), a dimming command is sent. The functions of Dimming with stop telegram and Dimming with cyclical sending are available. If Dimming with stop telegram is selected, a long push button action sends a command to the dimming object to dim by 100%. When the rocker is released, a stop command is sent. Siemens AG 240403, 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: http://www.siemens.de/installationstechnik 3.15.3.1.4/1
If Dimming with cyclical sending is selected, a dimming command is sent at set intervals for the duration of the push button action. It is also possible to assign parameters to the adjustment of the brightness value per dimming command (e.g. adjust by 1/8). LED display The first and third LED can be used for display or as an orientation light. In addition, if the operating mode 1 x dimming and 4 x value preselection is selected, all 4 LEDs are used for displaying the current preselection. Maximum number of group addresses: 8 Maximum number of associations: 9 Operating mode parameter 0 / Off Switch 1 Bit CWTU This object serves as a switching object for the rocker after a push button action. The default setting applies: pressing the upper sends an telegram while operation of the lower sends an Off telegram. If Toggle is selected, either an or an Off telegram is sent depending on the current switching state (toggling). 2 Preselection Value 1 Byte CWTU 3 Status (for LED Status 1 Bit CWU display) This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Switch parameter Operating mode 1 x dimming and 4 x value preselection 1 x shutter control and 4 x value preselection 1 x switching and 4 x value preselection The function of the rocker is defined via the Operating mode parameter, whereby the Value preselection function is not changed. The necessary objects appear in the object list depending on the parameter that has been assigned. The corresponding object types also change accordingly. Upper / Lower / Off Off / Toggle / Toggle This parameter defines the function of the upper and lower s. In the default setting, pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle/Toggle is selected, either an or an Off telegram is sent when the rocker is pressed, depending on the current object (toggling). Switch communication objects Shutter communication objects Technical Manual 240403, 6 pages Siemens AG Update: http://www.siemens.de/installationstechnik Siemens AG 2002 Electrical Installation Technology 3.15.3.1.4/2
0 Open / Closed Louvres 1 Bit CWTU Dimming communication objects (with stop telegram) This object serves as a switching object for louvre adjustment after a short push button action. The following applies: pressing the upper opens the louvres by one step with an Off telegram while pressing the lower closes the louvres by one step with an telegram. 1 Up / Down Shutter 1 Bit CWTU This object is used as a switching object for movement of the shutters after a long push button. The following default setting applies: pressing the upper raises the shutters with an Off telegram while pressing the lower lowers the shutters with an telegram. A short push button action during shutter movement causes the shutter to stop. 3 Preselection Value 1 Byte CWTU Shutter parameters Upper / lower Shutter Up / Down Shutter Down / Up This parameter defines the function of the upper and lower rocker s. In the default setting, a brief operation of the upper opens the louvres by one step with an Off telegram. Pressing the lower closes the louvres by one step with an telegram. A long operation of the upper raises the shutters with an Off telegram while a long operation of the lower lowers the shutters with an telegram. Long switch operation min. 0.3; 0.4; 0.5 ; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. 0 / Off Dimming 1 Bit CWTU This object serves as a switching object for the rocker after a short push button action. The following applies in the default setting: pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle is selected, either an or Off telegram is sent dependent on the current switching state (toggling). 1 Brighter / Dimming 4 Bit CWTU Darker This object serves as a dimming object for the rocker after a long push button action. The following applies: a long operation of the upper rocker sends a Dim brighter telegram while a long operation of the lower rocker sends a Dim darker telegram. 2 Preselection Value 1 Byte CWTU 3 Switch Status (/Off) 1 Bit CWU This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Siemens AG 240403, 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: http://www.siemens.de/installationstechnik 3.15.3.1.4/3
Dimming parameters (with stop telegram) Upper / lower Dimming / Off Dimming Toggle Dimming / Off cyclically Dimming cyclically toggle This parameter defines the function of the upper and lower rocker s. In the default setting, a short operation of the upper sends an telegram while a short operation of the lower sends an Off telegram. If a longer push button action is detected, pressing the upper sends a Dim brighter telegram while pressing the lower sends a Dim darker telegram. A Stop telegram is sent when the push button is released. If the setting Dimming toggle is selected, either an or an Off telegram is sent after a short push button action, depending on the current object (toggling). The dimming function is maintained as in the setting Dimming /Off. Long switch operation min. 0.3; 0.4; 0.5 ; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. 0 / off Dimming 1 Bit CWTU This object serves as a switching object for the rocker after a short push button action. The following applies in the default setting: pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle is selected, either an or Off telegram is sent dependent on the current switching state (toggling). 1 Brighter / Dimming 4 Bit CWTU darker This object serves as a dimming object for the rocker after a long push button action. The following applies: a long operation of the upper rocker sends a Dim brighter telegram while a long operation of the lower rocker s sends a Dim darker telegram. 2 Preselection Value 1 Byte CWTU 3 Switch Status (/Off) 1 Bit CWU This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Dimming parameters (with cyclical sending) Dimming communication objects (with cyclical sending) Upper / lower Dimming / Off Dimming Toggle Dimming / Off cyclically Dimming cyclically toggle This parameter specifies the function of the upper and lower rocker s. In the default setting, a short operation of the upper sends an telegram while a short operation of the lower sends an Off telegram. If a long push button action is detected (see parameter Long switch operation ), Dim brighter are sent at set intervals (see parameter Interval for cyclical sending ) when the upper is pressed and Dim darker are sent when the lower is pressed until the push button is released. If the setting Dimming toggle is selected, either an or an Off telegram is sent after a short push button action, depending on the current object (toggling). The dimming function is maintained as in the setting Dimming on/off. Technical Manual 240403, 6 pages Siemens AG Update: http://www.siemens.de/installationstechnik Siemens AG 2002 Electrical Installation Technology 3.15.3.1.4/4
Long switch operation min. 0.3; 0.4; 0.5; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. Interval for cyclical sending 0.3; 0.4; 0.5; 0.6; 0.8; 1.0; This parameter specifies the transmission frequency for cyclical sending for a long push button action. When setting the interval for cyclical sending, the bus load should be taken into consideration. Long switch operation (for dimming with cyclical sending) adjust by 1/2 adjust by 1/4 adjust by 1/8 adjust by 1/16 adjust by 1/32 adjust by 1/64 adjust by 100% It is possible to define here the adjustment in the brightness value that a dimming telegram carries out when a long push button action is detected. If the setting adjust by 1/8 is selected, 8 dimming must be sent before the lighting is dimmed from 0% to 100%. Display parameter Left LED / centre LED Left LED off, centre LED off Left LED off, centre LED on Left LED on, centre LED off Left LED for, centre LED off Left LED for, centre LED on Left LED off, centre LED for Left LED on, centre LED for Left LED inv., centre LED off Left LED inv., centre LED on Left LED off, centre LED inv. Left LED on, centre LED inv. all LEDs for value preselection The left LED and the centre LED can be assigned the function of display or orientation light. The setting all LEDs for value preselection is only available if the operating mode 1 x dimming and 4 x value preselection has been selected. Preselection parameters Value on preselection A 51 Value on preselection B 102 Value on preselection C 153 Value on preselection D 204 Value on preselection A B 75 Value on preselection A C 101 Value on preselection A D 126 Value on preselection B C 127 Value on preselection B D 152 Value on preselection C D 179 This parameter sets the brightness value that is sent directly when a preselection button or combination of prelection buttons are pressed. The range covers the values 0 to 255 or 0 to 100%. Siemens AG 240403, 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: http://www.siemens.de/installationstechnik 3.15.3.1.4/5
Preselection 2 parameters 4. Configured for dimming with cyclical sending < < Value on preselection A B C 102 Wert on preselection A B D 128 The brightness value is entered here that is sent directly after pressing a combination of preselection buttons. The range covers the values 0 to 255 or 0 to 100%. Dimming object 5. Configured for value preselection Operation of preselection button -1/8-1/8-1/8 +1/8 +1/8 +1/8 +1/8 Off Timing diagrams: Examples of rockers 1. Configured for switch function: upper, lower Off Value object Value Value Off Value Off Off Off 2. Configured for shutter function: upper Up, lower Down Louvres object < Open < Closed Shutter object Down Up 3. Configured for dimming with stop telegram < < Off Dimming object Darker Stop Brighter Stop Technical Manual 240403, 6 pages Siemens AG Update: http://www.siemens.de/installationstechnik Siemens AG 2002 Electrical Installation Technology 3.15.3.1.4/6