Bluetooth.0 /. + EDR Module 0700 0/MAR/05 5mm.5mm Features The module is a Max dbm (Class) module. AT Command Set provided for module configuration Bluetooth standard v.0 and BT v. + EDR specification Small outline: 5mm x.5mm x.mm Support for up to 7 ACL links and SCO links (HCI mode firmware) Class Radio with 5m range in open space Low current consumption: Hold, Sniff, Park, Deep Sleep Mode Excellent solution to integrate wireless connectivity to a product for short range connectivity.0 to.6 operation Interface: USB, UART & PCM (for OICE CODEC) SPP firmware available by default. Also offered HID firmware Support for 80. Co Existence RoHS compliant Applications External Antenna Serial Communications No Host Stack required Cordless handsets Extensive Technical Support available Digital camera s and printer s Support for encryption data and authentication Embedded Devices Low Cost Solution Access Points Low Power, Robust Design GPS, POS, Barcode Readers Interoperable with PDAs, Phones, PCs and Laptops Domestic and industrial applications Overview The Bluetooth Class Module is a an integrated module which runs on LM s own tried and tested BT. EDR or BT.0 EDR SPP Stack Firmware. The Bluetooth Class Module comes with SPP Stack and can also work with a range of Bluetooth profiles such as SPP, OBEX, HID, DUN etc. It supports.0v to.6v input and has a footprint of 5mm x.5mm x.mm. The Bluetooth Class Module is designed to provide excellent performance, with minimum power consumption, it can also be offered as a HCI mode module due to it s low cost. Page of 6 +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com
Bluetooth.0 /. + EDR Module 0700 0/MAR/05 Packaging Options Individual 07000 with BT/0/. + EDR firmware Tray 0700 with BT/0/. + EDR firmware Tape & Reel 900 0700 with BT/0/. + EDR firmware User Guides, Manuals and Widcomm Configuration Software available to download via our website http://www.lmtechnologies.com/support/downloads General Specification Chipset Power Classification Module Type Bluetooth Specification Frequency Data Rate Range Rx Sensitivity Antenna oltage operation Average Current Consumption (Deep Sleep Mode) Average Current Consumption (ACL Sniff Mode) Peak Current Consumption Power Output Default Firmware Size Bluetooth Profile Interface Serial Parameters UART lines Baud Rates Configuration Flash Memory RoHS Compliant CSR Bluecore BC0 Class Surface Mount SMT Bluetooth.0 and Bluetooth. + EDR 0 80 MHz Up to Mbps in HCI Mode 5m in open space 8 dbm typical External Antenna.0.6 0 ua. ma 58 ma + dbm v.55 (BT.0), v6.8 (BT.) 5mm x.5mm x.mm Serial Port Profile (SPP) UART Default 900, 8 N TxD, RxD,, CTS, RTS././.8/9.6/9./8./57.6/5./0./60.8/9.6 kbps AT Command Set 8MB Yes Page of 6 +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com
Bluetooth.0 /. + EDR Module Pin Assignments 0700 0/MAR/05 Pin Name Type Description PIO 8 Programmable Input / Output line PIO 9 Programmable Input / Output line PIO 0 Programmable Input / Output line AIO 0 Programmable Input / Output line, KHz sleep clock input 5 AIO Programmable Input / Output line, KHz sleep clock input 6 Reset if high. Input debounced so must be high for >5ms to cause a reset 7 SPI_MISO CMOS_Output Serial Peripheral Interface Data Output 8 SPI_CSB Chip Select For Synchronous Serial Interface active low 9 SPI_CLK Serial Peripheral Interface Clock 0 SPI_MOSI Serial Peripheral Interface Data Input UART_CTS UART Clear To Send (Active Low) UART_TX CMOS Output UART Data Output UART_RTS CMOS Output UART Request To Send (Active Low) UART_RX UART Data Input 5 PIO Programmable Input/Output line 6 Power. Power Supply Input 7 Ground 8 PCM_OUT CMOS Output Synchronous Data Output 9 PCM_SYNC Synchronous Data Sync 0 PCM_IN Synchronous Data Input PCM_CLK Synchronous Data Clock USB_DP USB Data Plus USB_DN USB Data Minus PIO 7 Programmable Input /Output line 5 PIO 6 Programmable Input /Output line, CLK_REQ, WLAN_Active /Ch_Data input 6 PIO 5 Programmable Input /Output line, USB_DETACH, BT_Active output 7 PIO Programmable Input / Output Line, USB_ON, BT_Priority /Ch_Clk Output 8 PIO Programmable Input/Output Line, USB_WAKE_UP, CLK_REQ_IN 9 PIO Programmable Input / Output Line, USB_PULL_UP, CLK_REQ_OUT 0 PIO Programmable Input/Output Line, TX Enable PIO 0 Programmable Input / Output Line, RX Enable Ground RF_IO Analogue 50 ohm Antenna connection Ground Page of 6 +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com
Bluetooth.0 /. + EDR Module 0700 0/MAR/05 General Electrical Specification Parameter Description Min Typical Max Units Operating oltage DD.00.0.60 RF Output Power Measured in 50 ohm 6 0 dbm RX Sensitivity 8 80 dbm Input Low oltage, UART, GPIO, PCM 0.0 0.80 Input High oltage, UART, GPIO, PCM 0.70DD DD+ 0.0 Output Low oltage UART, GPIO, PCM 0.0 Output High oltage UART, GPIO, PCM DD 0.0 Average Current Consumption Deep Sleep 0 ua Average Current Consumption ACL 0ms sniff. ma Average Current Consumption SCO connection H 9 ma Peak Current Tx burst + dbm 58 ma Block Diagram Regulator DD RF_IO B.P.F Balun UART () Loop Filter USB () Xtal PF + BB I/O PCM () SPI () G PIO () Flash Memory () Antenna Circuit C NC/060 0.UF,6, 800,Y5,060 CHIP/C C NC/060 0.UF,6, 800,Y5,060 CHIP/C L OR/060 0R, /0W, /5, 060 CHIP/R Page of 6 +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com
Bluetooth.0 /. + EDR Module 0700 0/MAR/05 Dimensions All measurements in mm Pin Out Information 5mm PIO 8 PIO 9 RF_IO PIO 0.5mm TOP IEW mm AIO 0 AIO PIO 0 PIO PIO SPI_MISO PIO SPI_CSB PIO.5mm SPI_CLK PIO 5 SPI_MOSI PIO 6 UART_CTS PIO 7 UART_TX USB_DN UART_RTS USB_DP. UART_RX PIO PCM_CLK PCM_IN PCM_SYNC 7 PCM_OUT 8 Design to Micro Strip Line 0.8.7mm.6 * 0.8 0.8 Page 5 of 6 +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com
Bluetooth.0 /. + EDR Module 0700 0/MAR/05 Application Schematic C 0 U OUT NC E ANTENNA IN CE 5 C.uF C.uF U5 R8 0. C5 0.uF LED D5 TO Host 5 6 TP 7 TP 8 TP 9 TP 0 RTS RX CTS TX 5 L. 7 CC DD 6 R 7. PIO(8) GROUND PIO(9) RF PIO(0) GROUND AIO(0) PIO(0) AIO() PIO() PIO() SPI_MISO PIO() SPI_CSB PIO() SPI_CLK PIO(5) SPI_MOSI PIO(6) UART_CTS PIO(7) UART_TX USB_DN UART_RTS USB_DP UART_RX PIO() GROUND PCM_CLK PCM_IN PCM_SY NC PCM_OUT L ANTENNA matching circuit INDUCTOR C CAP NP 0 C CAP NP 9 8 7 R6 00K 6 5. SW 0 R5 0 R9 0 Blue LED / AP0PBC D Link LED D6 Data 9 8 7 R U B AC Revision History. Page 6 of 6 0/MAR/05 Updated Datasheet +(0) 07 8 67 www.lmtechnologies.com sales@lmtechnologies.com