Keep Referee When REFER Failed: Reg Retry Long Random Delay: 0. RTP Tx Packet Size Follows Remote SDP:

Similar documents

Sipura Technology, Inc.

see the Cisco SPA100 Series Administration Guide for details. The configuration profile is uploaded to the Cisco SPA122 at the time of provisioning.

The main purpose of this release is improving voice quality and addressing stability issues observed in previous releases.

Cisco Small Business SPA2102, SPA3102, SPA8000, SPA8800, PAP2T

HT801/HT802 Firmware Release Note IMPORTANT UPGRADING NOTE

Configure the ATA 191

RP-FSO522 2-Line FXO, 2-Line FXS SIP IP Gateway. Feature

HT801/HT802 Firmware Release Note IMPORTANT UPGRADING NOTE

GRANDSTREAM NETWORKS Firmware Release Notes Firmware Version Product Name: GXW4216/GXW4224/GXW4232/GXW4248 Date: October 1, 2014

HT812/HT814 Firmware Release Note IMPORTANT UPGRADING NOTE

Cisco SPA112 2 Port Phone Adapter

PLEASE READ. This user manual is from the manufacturer Jive Communications may not support some features discussed in this document.

HT812/HT814 Firmware Release Notes IMPORTANT UPGRADING NOTE

HT812/HT814 Firmware Release Notes IMPORTANT UPGRADING NOTE

Cisco Analog Telephone Adaptor Overview

Cisco SPA122 ATA with Router

HT812/HT814 Firmware Release Notes IMPORTANT UPGRADING NOTE

SUMMARY OF UPDATES The main purpose of this release is additional features implementing and addressing stability issues observed in previous releases.

Cisco SPA Line IP Phone Cisco Small Business

HT801/HT802 Firmware Release Notes IMPORTANT UPGRADING NOTE

ANSEL FXS / 1 PSTN. VoIP Telephone Adaptor. User Manual V1.10

Cisco ATA 191 Analog Telephone Adapter

HT801/HT802 Firmware Release Notes IMPORTANT UPGRADING NOTE

TT11 VoIP Router 1FXS/1FXO TA User Guide

HT801/HT802 Firmware Release Notes IMPORTANT UPGRADING NOTE

HT802 Firmware Release Note IMPORTANT UPGRADING NOTE

User Manual. Unicorn Analog Telephone Adaptor. Hanlong Technology Co., Ltd. Table of Content.

Cisco SPA232D Multi-Line DECT ATA

User Guide. V110, V210P, V211, V220 VoIP ATA

8-Port Telephony Gateway. Higher Density Voice Solution Scales with your Business PRODUCT DATA

Firmware Release Notes Firmware Version Product Name: GXW4216/GXW4224/GXW4232/GXW4248 Date: November 9, 2015

Cisco ATA SPA112 & SPA122.

Cisco ATA 191 Analog Telephone Adapter Overview

Cisco ATA 191 Multiplatform Analog Telephone Adapter

KTA3100 INSTALL GUIDE

Cisco SPA122 ATA with Router

HT801/HT802 Firmware Release Notes IMPORTANT UPGRADING NOTE

AR168F SIP Phone User Guide

Pancode IP User Manual from Version 49 and above

EIP 7012 Essence VoIP Phone Administration Guide Version 1.0B

Release Note. Firmware Version Dec. 4, 2006

Cisco SPA922 1-Line IP Phone with 2-Port Switch Cisco Small Business IP Phones

DEVICE CONFIGURATION GUIDE

MTA8328-1N ANALOG TERMINAL ADAPTER. ` FEATURE-RICH AND HIGHLY MANAGEABLE TELEPHONE ADAPTER EMPOWERS VoIP SERVICE PROVIDERS

Release Notes. DRG SW R2N33 Release Notes

8-Port SIP VoIP Gateway (8 FXS)

5-3 Ring Dialing Plan General Dialing Rule Digit Manipulation Phone Book TEL Setting (FXS

Cisco ATA 192 Multiplatform Analog Telephone Adapter

SUMMARY OF UPDATES The main purpose of this release is additional features implementing and addressing stability issues observed in previous releases.

SPA400 Internet Telephony Gateway with 4 FXO Ports

Setting Up an Alcatel 4400 Digital PIMG Integration with Cisco Unity Connection

Linksys SPA921 IP Phone

NanoCUBE -- Emergency Number Preemption

GXW4216/GXW4224/GXW4232/GXW4248. Firmware Release Notes

Information About SIP Compliance with RFC 3261

SmartLink M-ATA Micro-Analog Telephone Adapter

Setting up Alcatel 4400 Digital PIMG Integration

Setting Up a Mitel SX-2000 Digital PIMG Integration with Cisco Unity Connection

HT818 Firmware Release Note

GXW4216/GXW4224/GXW4232/GXW4248. Firmware Release Notes

UCM6100 Series IP PBX Firmware Release Note

Cisco IP Phone Configuration Guide

PLEASE READ. This user manual is from the manufacturer Jive Communications may not support some features discussed in this document.

SVG300S+ 2 FXS SIP/IAX ATA USER MANUAL

VS Port FXS SIP. VoIP Telephone Adaptor. User Manual. V2.1h

Linksys SPA922 SIP IP Phone

SmartLink M-ATA. Micro-Analog Telephone Adapter. User Manual

All Rights Reserved. Copyright 2005

SDP-R25 User Manual 05/06/2015

HT812/HT814 Firmware Release Notes IMPORTANT UPGRADING NOTE

UCM6102/6104/6108/6116 Configuration

WellGate 2522 User Guide

KTA1010 INSTALL GUIDE

Release Note for TA400/800

AG-110 SIP Gateway User Manual

Compliance with RFC 3261

ADMINISTRATION GUIDE Cisco Small Business

Table of Contents. Save Changes Restart System Troubleshooting Warranty Contacting Technical Support Registration...

D-Link DVG-1402S. Manual. 2Voice + 4SW VoIP Router. Version B.1. Building Networks for People

User Manual HandyTone-486 Analog Telephone Adaptor For Firmware Version

Smart ATA Product Bulletin

Cisco SPA508G IP Phone

TG400/TG800 Series. VOIP Voice Gateway. Version: 2.0.1

Sipura SPA-1001 Simplified Users Guide Version 1.1a

INTERFACE SPECIFICATION SIP Trunking. 8x8 SIP Trunking. Interface Specification. Version 2.0

FXO-08 (SIP) User Manual

VOPTel Technology Co., Ltd DP20 Intercom User Manual

Setting Up an Avaya Definity ProLogix Digital PIMG Integration with Cisco Unity Connection

Sales Tel: Support Tel: Web:

Grandstream Networks, Inc.

for VoIP Gateway Series

Chapter TIMG BOILERPLATE

SV9100 SIP Trunking Service Configuration Guide for Cable ONE Business

User Manual. UTT-4 Voice-Fax Gateway Series. Ultrative Communications UTT-422 UTT-411 UTT

Version:

Configuring Multi-Tenants on SIP Trunks

Release Note for N412

Setting Up a Serial (SMDI, MCI, or MD-110) PIMG Integration with Cisco Unity Connection

VoIP ATA series (ATA171plus, ATA172plus, ATA-171, ATA-172, ATA-171M, ATA-171P)

Transcription:

SIP SIP Parameters Max Forward: 70 Max Redirection: 5 Max Auth: 2 SIP Server SIP Reg Starting Sequence Number: DTMF Relay MIME Type: Remove Last Reg: $VERSION application/dtmf-relay SIP User Agent SIP Reg User Agent SIP Accept Language: Hook Flash MIME Type: Use Compact Header: Escape Display RFC 2543 Call Hold: $VERSION Mark All AVT Packets: AVT Packet Size: ptime SIP TCP Port Min: 5060 SIP TCP Port Max: 5080 application/hook-flash CTI Keep Referee When REFER Failed: Caller ID Header: PAID-RPID-FROM SIP Timer Values (sec) SIP T1:.5 SIP T2: 4 SIP T4: 5 SIP Timer B: 32 SIP Timer F: 16 SIP Timer H: 32 SIP Timer D: 32 SIP Timer J: 32 INVITE Expires: 240 ReINVITE Expires: 30 Reg Min Expires: 1 Reg Max Expires: 7200 Reg Retry Intvl: 30 Reg Retry Long Intvl: 1200 Reg Retry Random 0 Reg Retry Long Random 0 Reg Retry Intvl Cap: 0 Response Status Code Handling SIT1 RSC: SIT2 RSC: SIT3 RSC: SIT4 RSC: Try Backup RSC: Retry Reg RSC: RTP Parameters RTP Port Min: 16384 RTP Port Max: 16482 RTP Packet Size: 0.030 RTP Tx Packet Size Follows Remote SDP: Max RTP ICMP Err: 0 RTCP Tx Interval: 0 No UDP Checksum: Stats In BYE: SDP Payload Types NSE Dynamic Payload: 100 INFOREQ Dynamic Payload: G729b Dynamic Payload: 99 RTP-Start-Loopback Dynamic Payload: 113 AVT Dynamic Payload: 101 G726r32 Dynamic Payload: 2 EncapRTP Dynamic Payload: 112 RTP-Start-Loopback G711u NSE Codec NSE AVT Codec telephone-event G711u Codec PCMU G711a Codec PCMA G726r32 Codec G726-32 G729a Codec G729a

G729b Codec G729ab EncapRTP Codec encaprtp NAT Support Parameters Handle VIA received: Handle VIA rport: Insert VIA received: Insert VIA rport: Substitute VIA Addr: Send Resp To Src Port: STUN STUN Test STUN Server: EXT IP: EXT RTP Port Min: NAT Keep Alive Intvl: 15 Redirect Keep Alive: Linksys Key System Parameters Linksys Key System: Multicast Address: 224.168.168.168:6061 Key System Auto Discovery: Key System IP Address: Force LAN ne Station Provisioning Configuration Profile Provision Resync On Reset: Resync Random 2 Resync At (HHmm): Resync At Random 600 Resync Periodic: 3600 Resync Error Retry Resync From SIP: Resync Trigger 1: Resync Trigger 2: Resync Fails On FNF: Profile Rule: Profile Rule B: Profile Rule C: Profile Rule D: 3600 /spa$psn.cfg Forced Resync 14400 Resync After Upgrade Attempt: DHCP Option To Use: 66,160,159,150 Transport Protocol: https Log Resync Request Log Resync Success Log Resync Failure Report Rule: Firmware Upgrade Upgrade Upgrade Error Retry 3600 Upgrade Rule: Log Upgrade Request Log Upgrade Success $PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH $PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH $PN $MAC -- Resync failed: $ERR Downgrade Rev Limit: $PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH $PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR

Log Upgrade Failure License Keys: $PN $MAC -- Upgrade failed: $ERR CA Settings Custom CA URL: General Purpose Parameters GPP A: GPP B: GPP C: GPP D: GPP E: GPP F: GPP G: GPP H: GPP I: GPP J: GPP K: GPP L: GPP M: GPP N: GPP O: GPP P: Regional Call Progress Tones Dial 400@-16,425@-16,450@-16;10(*/0/1+2+3) Second Dial Outside Dial Prompt Busy Reorder Off Hook Warning Ring Back Ring Back 2 Confirm SIT1 SIT2 SIT3 SIT4 MWI Dial 420@-19,520@-19;10(*/0/1+2) 420@-16;10(*/0/1) 520@-19,620@-19;10(*/0/1+2) 425@-16;10(.375/.375/1) 480@-19,620@-19;10(.25/.25/1+2) 480@-10,620@0;10(.125/.125/1+2) 440@-19,480@-19;*(2/4/1+2) 440@-19,480@-19;*(1/1/1+2) 600@-16;1(.25/.25/1) 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0) 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0) 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0) 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0) 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)

Cfwd Dial Holding Conference Secure Call Indication Feature Invocation Call Remind 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2) 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1) 350@-19;20(.1/.1/1,.1/9.7/1) 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2) 350@-16;*(.1/.1/1) Distinctive Ring Patterns Ring1 Cadence: 60(.4/.2,.4/2) Ring2 Cadence: 60(.3/.2,1/.2,.3/4) Ring3 Cadence: 60(.4/.2,.4/.2,.8/4) Ring4 Cadence: 60(.3/.2,1/.2,.3/4) Ring5 Cadence: 1(.5/.5) Ring6 Cadence: 60(.2/.4,.2/.4,.2/4) Ring7 Cadence: 60(.4/.2,.4/.2,.4/4) Ring8 Cadence: 60(0.25/9.75) Distinctive Call Waiting Tone Patterns CWT1 Cadence: *(.3/9.7) CWT2 Cadence: 30(.1/.1,.1/9.7) CWT3 Cadence: 30(.1/.1,.1/.1,.1/9.7) CWT4 Cadence: 30(.1/.1,.3/.1,.1/9.3) CWT5 Cadence: 1(.5/.5) CWT6 Cadence: 30(.1/.1,.3/.2,.3/9.1) CWT7 Cadence: 30(.3/.1,.3/.1,.1/9.1) CWT8 Cadence: 2.3(.3/2) Distinctive Ring/CWT Pattern Names Ring1 Bellcore-r1 Ring2 Bellcore-r2 Ring3 Bellcore-r3 Ring4 Bellcore-r4 Ring5 Bellcore-r5 Ring6 Bellcore-r6 Ring7 Bellcore-r7 Ring8 Bellcore-r8 Ring and Call Waiting Tone Spec Ring Waveform: Trapezoid Ring Frequency: 20 Ring Voltage: 85 CWT Frequency: 440@-10 Synchronized Ring: Control Timer Values (sec) Hook Flash Timer Min:.1 Hook Flash Timer Max:.9 Callee On Hook 0 Reorder 5 Expires: 1800.5 Interdigit Long Timer: 10 Retry Intvl: 30 VMWI Refresh Intvl: 0 Interdigit Short Timer: 3 CPC 2 CPC Duration:.5 Vertical Service Activation Codes Call Return *69 Call Redial *07 Blind Transfer *98 Act *66 Deact *86 Cfwd All Act *72 Cfwd Busy Act *90 Cfwd No Ans Act *92 Cfwd Last Act *63 Busy Act *05 Cfwd All Deact *73 Cfwd Busy Deact *91 Cfwd No Ans Deact *93 Cfwd Last Deact *83

Block Last Act *60 Accept Last Act *64 Block Last Deact *80 Accept Last Deact *84 CW Act *56 CW Deact *57 CW Per Call Act *71 Block CID Act *67 Block CID Per Call Act *81 Block ANC Act *77 CW Per Call Deact *70 Block CID Deact *68 Block CID Per Call Deact *82 Block ANC Deact *87 DND Act *78 DND Deact *79 CID Act *65 CID Deact *85 CWCID Act *25 Dist Ring Act *26 CWCID Deact *45 Dist Ring Deact *46 Speed Dial Act *74 Paging *96 Secure All Call Act *16 Secure One Call Act Conference Act Modem Line Toggle Media Loopback Referral Services Codes: Feature Dial Services Codes: *18 *99 *03 Vertical Service Anuncement Codes Service Annc Base Number: Service Annc Extension Codes: Outbound Call Codec Selection Codes Secure No Call Act *17 Secure One Call Deact *19 Attn-Xfer Act FAX Line Toggle #99 Prefer G711u *017110 Force G711u *027110 Prefer G711a *017111 Force G711a *027111 Prefer G726r32 *0172632 Force G726r32 *0272632 Prefer G729a *01729 Force G729a *02729 Miscellaneous FXS Port Impedance: FXS Port Output Gain: 220+820 115nF -3 DTMF Twist: 2 FXS Port Input Gain: -3 DTMF Playback Level: -16 DTMF Playback Length:.1 Detect ABCD: Playback ABCD: Caller ID Caller ID FSK Standard: bell 202 Line 1 Bellcore(N.Amer,China) FXS Port Power Limit: 3 Feature Invocation Default General Line Streaming Audio Server (SAS)

SAS SAS Inbound RTP Sink: SAS DLG Refresh Intvl: 30 NAT Settings NAT Mapping NAT Keep Alive $NOTIFY NAT Keep Alive NAT Keep Alive Dest: $PROXY Network Settings SIP ToS/DiffServ 0x68 SIP CoS Value: 3 [0-7] Value: RTP ToS/DiffServ Value: 0xb8 RTP CoS Value: 6 [0-7] Network Jitter Buffer Jitter Level: high Adjustment: SIP Settings SIP Transport: UDP SIP Port: 5060 SIP 100REL EXT SIP Port: Auth Resync- Reboot: SIP Proxy-Require: SIP Remote- Party-ID: SIP GUID: SIP Debug Option: ne RTP Log Intvl: 0 Restrict Source IP: Referor Bye 4 Refer Target Bye 0 Referee Bye 0 Refer-To Target Contact: Auth INVITE: Use Anymous With RPID: Sticky 183: Reply 182 On Call Waiting: Use Local Addr In FROM: Call Feature Settings Blind Attn-Xfer MOH Server: Xfer When Conference Bridge Hangup URL: Conf: Conference Bridge Ports: 3 Enable IP Dialing: Emergency Number: Feature Key Sync: Proxy and Registration Proxy: sip.interde.on.net Mailbox ID: Outbound Proxy: Use Outbound Proxy: Register: sip.interde.on.net Register Expires: 3600 Use DNS SRV: Proxy Fallback Intvl: 3600 Mailbox Subscribe URL: Auto Register When Failover: Use OB Proxy In Dialog: Make Call Without Reg: Ans Call Without Reg: DNS SRV Auto Prefix: Proxy Redundancy Normal Mailbox Subscribe Expires: 2147483647 Subscriber Information Display Nodephone User ID: 0XXXXXXXXX Password: **** Use Auth ID:

Auth ID: Resident Online Number: SIP URI: Supplementary Service Subscription Call Waiting Block CID Block ANC Dist Ring Cfwd All Cfwd Busy Cfwd No Ans Cfwd Sel Cfwd Last Block Last Accept Last DND CID CWCID Call Return Call Redial Three Way Call Three Way Conf Attn Transfer Unattn Transfer MWI VMWI Speed Dial Secure Call Referral Feature Dial Reuse CID Number As Service Anuncement CONFCID Audio Configuration Preferred Second Preferred G711u Unspecified Third Use Pref Codec Preferred Unspecified Only: Use Remote Pref Codec Negotiation: Default G729a Silence Supp G726-32 Silence Threshold: high FAX V21 Detect Echo Canc FAX CNG Detect FAX Codec Symmetric: FAX Passthru DTMF Process INFO: FAX Passthru NSE DTMF Process AVT: G711u FAX Process NSE: DTMF Tx Auto FAX Disable ECAN: DTMF Tx Mode: Normal DTMF Tx Strict Hold Off Time: 70 FAX Enable T38: Hook Flash Tx FAX T38 ECM Symmetric RTP: Modem Line: None FAX T38 Redundancy: 1 FAX Tone Detect Mode: FAX T38 Return to Voice: RTP to Proxy in Remote Hold: caller or callee Dial Plan Dial Plan: (*xx [3469]11 0 00 [2-9]xxxxxx 1xxx[2-9]xxxxxxS0 xxxxxxxxxxxx.) FXS Port Polarity Configuration Idle Polarity: Forward Callee Conn Polarity: Forward Caller Conn Polarity: Forward