Adobe Experience Manager Dev/Ops Engineer Adobe Certified Expert Exam Guide. Exam number: 9A PDF Free Download

Adobe Experience Manager Dev/Ops Engineer Adobe Certified Expert Exam Guide Exam number: 9A0-397 Revised 06 February 2018

About Adobe Certified Expert Exams To be an Adobe Certified Expert is to demonstrate expertise in helping clients realize value in an Adobe solutions. Adobe's Certification exams follow industry-accepted procedures to ensure validity and reliability. We work with industry experts to create our exams, which represent real-world requirements and objectives for the job roles we certify. This guide is designed to provide the recommendations needed to prepare for your Adobe Certified Expert exam, and help you determine when you are ready to take the exam. It will outline the knowledge and skills required of a "minimally qualified candidate" for a specific job role, which will be evaluated in the exam. How is the Adobe AEM Dev/Ops Engineer Exam Structured? Number of questions: 50 Time limit: 75 minutes Passing score: All Adobe exams are reported on a scale of 300 to 700. The passing score for each exam is 550. For more information about scaled scoring, visit the FAQs. How Do I Register for the Exam? Our exams are delivered worldwide by PSI. Exam name: Adobe Experience Manager Developer/Operations Engineer Exam number: 9A0-397 Exam cost: $180 (US Dollars) To register for the exam at a PSI testing center: 1. Visit Adobe s credential management system. 2. If you have logged in before, use your email address or login ID and password to access the system and go to step 6. 3. If you have never logged into CertMetrics before, click Never logged in before to create an account and follow step 4 or 5. 4. If you have previously taken an Adobe exam, select Click here if you have already taken an Adobe exam. You will be asked to enter the email address you last used to register for an exam. If you do not remember which email address you used, you may also enter information from an exam score report to verify your identity. You will receive an email with your login ID and a link to reset your password. 1

5. If you have never taken an Adobe exam before, provide the required information to establish an account. Once you submit the form, you will receive an email prompting you to set up a login ID and password. 6. When you are logged into CertMetrics, click Schedule your exam at PSI. 7. You will be directed to a new page within CertMetrics where you will click Click here to log in to PSI. 8. Scroll through the list of exams and press the Schedule Exam button for your exam. 9. Select your exam language and location to see test center options in your area. 10. Select an available date and start time. 11. Confirm schedule details to receive a booking confirmation. 12. Proceed to payment. 13. After payment is successful, you will receive an email confirmation your registration details and a receipt. 2

1. Click on Proceed to Checkout 2. Review and click the checkbox to agree to the exam policies, then click Next 3. Choose your method of payment. If you have a voucher or promotion code, Click on the Add Voucher or Promo Code and enter the voucher number into the text box and click Apply What topics are covered on the Adobe AEM Dev/Ops Engineer exam? The tasks measured on the exam are grouped into the following domains: Installing platform instances Configuring AEM Maintaining and optimizing AEM Administrating application operations Troubleshooting AEM Within each domain, there are specific tasks that you should be able to perform as an Adobe AEM Dev/Ops Engineer: 3 Installing platform instances You should be able to apply the appropriate procedure to configure the AEM instance as an author or publish. You should also be able to apply the procedures necessary to configure the AEM instance to use MongoDB, TarMK, or other persistence layers. In addition, you should be able to apply the procedure to install Apache and dispatcher module as well as apply the procedure used to set the runmode. Configuring AEM You should be able to apply the procedure to configure the replication agents and to configure custom loggers. You should also be able to apply the security checklist. In addition, you should be able to apply the procedure to configure global AEM OSGi settings and to configure the AEM dispatcher. Maintaining and optimizing AEM You should be able to apply the procedure to backup and restore AEM. You should also be able to determine when to use online compaction or offline compaction as well as apply the procedure to configure regularly scheduled maintenance. In addition, you should be able to analyze specific storage usage by the application, apply different procedures to configure JVM runtime settings, and apply the procedure to take a publish instance out of production. Administrating application operations You should be able to apply the procedure to deploy a package or bundle. You should also be able to apply best practices to setup a continuous deployment job. In addition, you should be able to apply the procedure to install an AEM Hotfix or Feature Pack to an existing AEM instance (Author and/or Publish).

Troubleshooting AEM You should be able to determine the cause of HTTP output issues to resolve the issue as well as determine the cause of performance problems to resolve the issue. You should also be able to evaluate the monitoring system for the AEM environment (e.g. dispatcher, AEM instances, the operating system, disk utilization, application metrics). In addition, you should be able to determine and resolve the rights management issues and the configuration deployment issues as well as apply the procedures to clone the AEM environment. Distribution of content covered on the exam: The questions on the exam are distributed as follows for each domain. (Note: each question carries the same weight and there is no partial credit for any question) Domain Percent of Exam Installing platform instances 10% Configuring AEM 16% Maintaining and optimizing AEM 26% Administrating application operations 22% Troubleshooting AEM 26% The Adobe AEM Dev/Ops Engineer job role This exam is designed for individuals who are currently performing or have previous work experience with the job responsibilities of an Adobe AEM Dev/Ops Engineer. The Minimally Qualified Candidate To pass the exam, you must possess the minimum level of knowledge, skills, and abilities required of an Adobe AEM Dev/Ops Engineer, which are outlined below. Adobe AEM Dev/Ops Engineer you should be able to perform the following tasks without any assistance: 4 Identify which AEM runtime parameters need to be monitored Analyze log data Conduct initial interpretation of heap and thread dumps Tune the performance of hardware, operating system, and the JVM (not coding optimization) Out-of-box AEM specific tuning Monitor out-of-box AEM metrics

Define custom metrics for an installation Configure AEM to meet custom performance metrics Define measurement points required to monitor customer-specific code Define runtime dependencies and monitoring practices for third-party integrations Configure, setup, and monitor maintenance processes Create and revise disaster recovery plans Execute a disaster recovery plan Ensure safe deployment with minimal downtime or errors Conduct initial installation and configuration of AEM environment (e.g., publishers, dispatches, authors, clusters, persistence) Operate AEM with any supported persistence layer Manage the overall AEM platform (operational, hands on, changing the configuration) Automate operational tasks (e.g., automated deployments, configuration and reconfiguration) Clone environments Transfer data including content, configuration and application between environments Build, release and deploy code Define criteria and execute tests for operational acceptance Manage AEM authorizations permissions including users, groups, LDAP, SAML, etc. Debug the full web stack Create tools for debugging AEM, configuring AEM, etc. Apply tasks from the security checklist to the environment Adjust security checklist to meet environment-specific needs You should also be familiar with common UNIX administration tools, system monitoring tools, build and deployment of automation tools, Java (troubleshooting, profiling, monitoring and management tools), Java build tools (e.g., Maven), and configuration management tools (including version management tools). What is the typical job experience for minimally qualified candidates taking this exam? A minimally qualified Adobe AEM Dev/Ops Engineer typically has the following work experience: 2 3 years experience operating and developing AEM solutions (with a focus on non-functional aspects) 2 3 years experience defining system architecture (network, topology, etc.) Can manage experienced developers who may not be familiar with AEM, but get them set up with their development, QA environments, automated build, source control Familiar with IT change and operations management processes Prior troubleshooting experience reviewing code (desirable, but may not be a prerequisite) Experience with Java and understanding of good coding practices Knowledge of OSGi 5

What training is available to help me prepare for the exam? Is training required? You are not required to complete training before taking the exam; however, training can significantly increase your knowledge of and skills with Adobe Experience Manager. It is important to note that training alone will not provide you with the knowledge and skills required to pass an exam. Successful, on-the-job experience is critical to providing you the knowledge needed to pass the exam. Training for Adobe Partners A variety of training and resources are available for Adobe Solution Partners. To access these resources, you will need to login to the Solution Partner Portal with your Adobe ID and visit the Training landing page. From there you can select your solution of interest and access on-demand, instructor led, and onsite training options. On-demand Training: All Partners have access to on-demand training resources for sales, technical and delivery roles. This includes self-paced learning modules, eseminar videos, quizzes, exams, and test outs to help measure comprehension - All at no cost! Virtual Instructor Led Training: Partners at the Business and above levels can access Virtual Instructor Led Training through the learning management system. These trainings are 100% subsidized. In-person Instructor Led Training: Partners also have access to training delivered through Adobe Digital Learning Services (ADLS). Adobe Digital Learning Services offers comprehensive, hands-on courses across all job roles. Learn from Adobe experts in a virtual classroom or live in-person at any Adobe training center globally. Courses come with a cost and Partners receive a discount (15-30%) based on their Partner level in the Solution Partner Program. On-site Training: Get your team up-to-speed quickly with on-site training where we can come to your location or you can bring your team to one of our training centers. Adobe Digital Learning Services offers flexible, convenient instructor-led training for teams virtually or in-person. Content can be customized to match your unique learning requirements. Partners also have access to Certification Learner Journeys, Certification Paths, and free Certification Prep courses. Please visit the Solution Partner Portal Certification page to access these valuable resources. Not registered for the Solution Partner Portal? Please follow these instructions to get registered. 6

Training Courses Available to the Public You can find a complete list of all Adobe training and tutorials here. How do I know if I am ready to take the exam? Nothing can guarantee that you will pass your test, however; the more practical work experience you have and the more training you complete, the better your chances are to pass the test. Use the selfassessment preparation worksheet (below) to evaluate your level of readiness. On-the-Job Experience Since Adobe exams measure knowledge and skills for a specific job role, one of the best ways to prepare for the exam is to ensure you have the minimum work experience, as described in this guide. 7

Self-Assessment Preparation Worksheet Use the following worksheet to review the exam topics, and assess your own readiness. If you need to prepare more for a certain topic, determine if you need training, on the-job-experience, or both. Topic Yes No Installing AEM platform instances I can apply the appropriate procedure to configure the AEM instance as an author or publish I can apply the procedures necessary to configure the AEM instance to use MongoDB, TarMK or other persistence layers to develop a testing roadmap I can apply the procedure to install Apache and dispatcher module I can apply the procedure used to set the runmode Topic Yes No Configuring AEM I can apply the procedure to configure the replication agents I can apply the procedure to configure custom loggers I can apply the security checklist I can apply the procedure to configure global AEM OSGi settings I can apply the procedure to configure the AEM dispatcher Topic Yes No Maintaining and Optimizing AEM I can apply the procedure to backup and restore AEM I can determine when to use online compaction or offline compaction I can apply the procedure to configure regularly scheduled maintenance I can analyze specific storage usage by the application I can apply different procedures to configure JVM runtime settings I can apply the procedure to take a publish instance out of production Topic Yes No Administrating application operations I can apply the procedure to deploy a package or bundle I can apply best practices to setup a continuous deployment job I can apply the procedure to install an AEM Hotfix or Feature Pack to an existing AEM instance (Author and/or Publish) Topic Yes No Troubleshooting AEM 8

I can determine the cause of HTTP output issues to resolve the issue I can determine the cause of performance problems to resolve the issue I can evaluate the monitoring system for the AEM environment (e.g., dispatcher, AEM instances, the operating system, disk utilization, application metrics) I can determine and resolve the rights management issues I can determine and resolve the configuration and deployment issues I can apply the procedures to clone the AEM environment 9

Sample questions Try out these practice questions to get a feel for the types of questions on the exam. Please note that your performance here does not indicate how you will do on the actual exam. To fully prepare for the exam, closely review the topic areas and objectives in this Exam Guide. You will find the correct answers at the end of the exam guide. 1. You are starting AEM by using the command line. How should you configure the runmode? A. System hostname should have runmode defined B. Provide java property to the start command starting aem jar -Distance.type=runmode C. Provide runmode to the jar with and -r option D. Provide -r runmode to the start.sh script 2. Which three types of persistence layers are supported for AEM? (Choose three.) A. Tar Storage B. Apache Solr based Storage C. Mongo DB Storage D. Relational DB persistence using Document Microkernel E. Apache Hadoop based Storage 3. What is the purpose of the Adobe Dispatcher? A. It is a binary module and an example configuration for Apache HTTP Server, Microsoft IIS, and Oracle iplanet Web Server. B. It is an example configuration based on HTTP cache headers and load balancer scheduler for Apache HTTP Server, Microsoft IIS, and Oracle iplanet Web Server. C. It is a Java web framework and asynchronous networking library based on Jetty and optimized for AEM. D. It is a hardware appliance for HTTP load balancing from Adobe. 4. Which method should be used to specify which run mode to use? A. A custom run mode can be activated by using the -r option when launching the quickstart java - jar aem-6.1.0.jar -r author, prod B. A system property in the start script can be used to specify the run mode - Dsling.run.modes=author,prod C. The sling.properties file can be used by adding property sling.run.modes=author,prod D. An application server property sling.run.modes in the file WEB-INF/web.xml 5. In the replication agent configuration, what HTTP methods should be used for a dispatcher flush agent? 10 A. GET and PUT B. POST and DELETE C. POST and PUT

D. GET and POST 6. For the Sling log rotation, which pattern will rotate the log file every minute? A. '.'yyyy-mm-dd-hh-** B. '.'yyyy-mm-dd-hh-mm C. '.'yyyy-mm-dd-hh-mm D. '.'yyyy-mm-dd-hh-*1 7. A DevOps engineer changes the AEM admin password but does not change the admin password for the OSGi Web console after initial installation. What is the result? A. The default password can be used at startup. B. The OSGi Web console password will be automatically replaced during the next restart. C. Replication from Author to Publish will always fail D. The next startup will fail 8. Which two bundle statuses exist in the bundle lifecycle? (Choose two). A. INSTALLED B. RUNNING C. OFFLINE D. ACTIVE 9. Which of the following statements improves author instance performance? A. Set up dispatcher for author instance B. Run aem as root C. Put author instance behind the load balancer D. Enforce HTTPS 10. A DevOps engineer needs to recover data. In which order should the DevOps engineer consider recovery options? A. content package recovery, oak repository version recovery, full backup recovery B. full backup recovery, content package recovery, OSGi repository recovery C. full system recovery, differential backup recovery, component package recovery D. incremental backup recovery, component package recovery, LVM snapshot recovery 11. A DevOps engineer has a CRX3 repository that grows. 11 What should the DevOps engineer do to decrease disk space usage? A. Restart JVM to empty internal buffers and temporary files B. Execute online or offline Tar compaction C. Execute a workflow to empty the user s temporary files

D. Execute binary query logs compaction 12. With a multi-publish system setup, when should maintenance jobs be run? A. In parallel on all publish systems to make sure the jobs are completed faster B. Sequentially one publish after the other so that the impact on performance is less C. When all publish systems are offline at once D. In parallel on all publish systems so that the performance impact is less 13. A DevOps engineer needs to change default temporary files directory for Java Virtual Machine. What should the DevOps engineer define to perform this task? A. A <new-tmp-path> by using export JAVA_IO_TMPDIR=/<new-tmp-path> to the JVM process user B. A <new-tmp-path> by adding the JVM parameter -Djava.io.tmpdir= /<new-tmp-path> to the server startup command C. A <new-tmp-path> by setting the kernel state to sysctl java.io.tmpdir=/<new-tmp-path D. A <new-tmp-path> by changing symlink in JAVA_HOME directory where the temporary files directory is placed 14. How should a DevOps engineer determine the last version of a previously installed AEM package? (Choose two.) A. Accessing the package information in the package manager B. Using CURL with the REST API C. Using the OSGI console D. Using JMX MBean 15. Which default directory should be used to install hotfix or service pack package? A. Put a package under crx-quickstart/install B. Place package in repository folder C. Place package in launchpad folder 12

Answer key Try out these practice questions to get a feel for the types of questions on the exam. Please note that your performance here does not indicate how you will do on the actual exam. To fully prepare for the exam, closely review the topic areas and objectives in this Exam Guide. You will find the correct answers at the end of the exam guide. 1. You are starting AEM by using the command line. How should you configure the runmode? Correct Answer: C Provide runmode to the jar with an -r option 2. Which three types of persistence layers are supported for AEM? (Choose three.) Correct Answer: A Tar Storage, C Mongo DB Storage, and D Relational DB persistence using Document Microkernel. 3. What is the purpose of the Adobe Dispatcher? Correct Answer: A - It is a binary module and an example configuration for Apache HTTP Server, Microsoft IIS, and Oracle iplanet Web Server. 4. Which method should be used to specify which run mode to use? Correct Answer: A A custom run mode can be activated by using the -r option when launching the quickstart java -jar aem-6.1.0.jar -r author, prod 5. In the replication agent configuration, what HTTP methods should be used for a dispatcher flush agent? Correct Answer: D GET and POST 6. For the Sling log rotation, which pattern will rotate the log file every minute? -13 Correct Answer: B - '.'yyyy-mm-dd-hh-** 7. A DevOps engineer changes the AEM admin password but does not change the admin password for the OSGi Web console after initial installation. What is the result? Correct Answer: A The default password can be used at startup. 8. Which two bundle statuses exist in the bundle lifecycle? (Choose two). Correct Answer: A INSTALLED and D- ACTIVE 9. Which of the following statements improves author instance performance? Correct Answer: A Set up dispatcher for author instance.

10. A DevOps engineer needs to recover data. In which order should the DevOps engineer consider recovery options? Correct Answer: A content package recovery, oak repository version recovery, full backup recovery. 11. A DevOps engineer has a CRX3 repository that grows. What should the DevOps engineer do to decrease disk space usage? Correct Answer: B Execute online or offline Tar compaction. 12. With a multi-publish system setup, when should maintenance jobs be run? Correct Answer: B Sequentially one publish after the other so that the impact on performance is less 13. A DevOps engineer needs to change default temporary files directory for Java Virtual Machine. What should the DevOps engineer define to perform this task? Correct Answer: B A <new-tmp-path> by adding the JVM parameter -Djava.io.tmpdir= /<new-tmppath> to the server startup command 14. How should a DevOps engineer determine the last version of a previously installed AEM package? (Choose two.) Correct Answer: A Accessing the package information in the package manager and B- Using CURL with the REST API 15. Which default directory should be used to install hotfix or service pack package? Correct Answer: A Put a package under crx-quickstart/install -14

Support For information on certification visit the Solution Partner Portal website. To contact us, please send an email to Certification Support. Adobe Systems Incorporated 345 Park Avenue San Jose, CA 95110-2704 USA www.adobe.com -15

Adobe Experience Manager Dev/Ops Engineer Adobe Certified Expert Exam Guide. Exam number: 9A0-397