MA1801 WATERTIGHT MARINE AM/FM RADIO BLUETOOTH MULTIMEDIA SYSTEM SPECIFICATIONS GENERAL - USB Input (Rear) - 2ch Aux Inputs (Rear) - LCD Display - Clock - IP66 Watertight - Water & Salt Protection PCB Coating - Diecast Aluminium Housing - Loud Impedance: 4-8Ohms - 89mm Circular Face (Gauge Type) - 75mm cut out - 55mm Mounting Depth - 20W x 2ch RMS Output @ 14.4V - 40W x 2ch Peak Output @ 14.4V TUNER - AM/FM Auto Seek Receiver - FM 87.5~108 MHz; AM 522~1620 KHz - Radio Regions: Australia, (Europe) and USA MULTIMEDIA - MP3 Playback via USB - S/N Ratio: >55dB - Frequeny Response: 20-20KHz - A/D Conversion Filter: 16 Bit BLUETOOTH - Bluetooth A2DP Audio Streaming INCLUDED - Installation Hardware - ISO Wiring Harness INSTRUCTION 1 MANUAL
Contents 1. Basic Operation... 3 2. Radio Operation... 5 3. USB/MP3 Operation... 6 4. Bluetooth Operation... 8 5. Clock Display and Adjustment... 3 6. Installation and Wiring... 5 7. Specifications... 6 8. Trouble Shooting... 8 Main Features AM/FM USB Input Bluetooth Function RCA Output Clock 20W x 2ch RMS Output 40W x 2ch Peak Output IP66 Watertight Congratulations in choosing this quality multimedia unit! We wish you countless hours of mobile entertainment! Care and Maintenance Clean the player with a slightly damp, soft cloth, using household glass cleaner. Do not use solvents such as benzene, thinners or commercially available cleaners. Inspect the connections on the rear of the unit. Make sure the wiring is correct and the unit has no corrosion. 2
1. Basic Operation 1. POWER Button a. Press to turn power on. b. Press to mute audio output. c. Press and hold to turn power off. 2. VOL+ Button Press VOL+ to increase volume. 3. VOL- Button Press VOL- to decrease volume. 4. Button Press to track down. 5. Button Press to track up. 6. BAND Button a. Press BAND to switch between FM and AM in radio mode. b. Press to play/pause in USB mode. d. Hold to display clock. 7. MODE Button Press MODE to switch between FM/BT MUSIC/AUX IN. 8. Bass/Treble/Balance/Fader/Loud/EQ/Area Tuning/Mode Press and hold MODE button for 2 seconds and then press MODE button to switch between BAS/TRE/BAL/FAD/LOUD/EQ/AREA USA-EUR/Mode. Bass Level Use the VOLUME buttons to adjust the Bass level range from "-7" to "+7". Default setting is "0". Treble Level Use the VOLUME buttons to adjust the Treble level range from "-7" to "+7". Default setting is "0". Balance Use the VOLUME buttons to adjust the Balance between the left and right speakers from "L7" (full left) to R7 (full right). Fader (N/A) Use the VOLUME buttons to adjust the Fader between the rear and front speakers from "R7" (full rear) to F7 (full front). Loud Use the VOLUME buttons to select Loudness between ON and OFF. Default setting is OFF. EQ Use the VOLUME buttons to select EQ from FLAT, CLASSIC, POP, ROCK. Default setting is OFF. 3
Area Tuning To select the appropriate frequency spacing for your country. Use the VOLUME buttons to switch area tuning between USA and Australasian (Europe) Radio frequency. Time Format Use the VOLUME buttons to switch Time format between 24hour and 12hour. Beep To select button tone (On/Off) 2. Radio (FM/AM) Operation Press BAND button to switch between FM and AM. Auto Seek tuning UP/DOWN: Press buttons less than 2 seconds to automatically seek next/previous file. Manual tuning UP/DOWN: Press and hold any one of the buttons more than 2 seconds to seek stations up and down step by step. 3. USB/MP3 Operation a. Insert a II USB stick. The unit will automatically read the saved files. b. Press or button to play next/previous file. c. Press and hold or button more than 2 seconds to fast forward/back. d. Press button to pause/resume the current music. 4. Bluetooth Operation This unit supports Bluetooth for wireless music streaming from your iphone/android or similar Bluetooth device. Connecting steps are as follows: - Press MODE button to switch to "BT". - Turn on the Bluetooth of your Bluetooth device. - Scan for the unit (Bluetooth name: AXIS MA1801) by using your Bluetooth device. - Select the unit (Bluetooth name: AXIS MA1801). The connection then will be made automatically. Attention: Some Bluetooth devices require a pass code for connection. Please input "0000", then the connection should automatically be made. Bluetooth Audio Function: Press or button for previous/next file. Press VOL+ or VOL- button for turning UP/DOWN the volume. Once the unit connects with your Bluetooth device for the first time, future connections should be automatic if within valid range. 4
5. Clock Display and Adjustment Press and hold BAND button for 2 seconds to display clock. When the clock is displayed, press and hold BAND button for 2 seconds until the hour number is flashing. Then use the VOLUME buttons to adjust hours. Once hour number is set, press BAND button to display minutes. Use the VOLUME buttons to adjust minutes. 6. Installation and Wiring WARNING! Before installing this unit to any panel, ALWAYS ensure that there is sufficient clearance behind the panel and that no wire harnesses, fuel lines, moving linkages, or any other critical components are exposed or damaged by the installation. NEVER risk damaging the hull when installing. INSTALLATION This unit operates with a negative ground 12 Volt power supply. a. Before starting: Read these instructions carefully. Be sure to disconnect the battery "-" terminal first. This is to prevent short circuits during installation. To avoid interference, do not install the unit in the proximity of the engine compartment. Always check wire connections to ensure proper installation before turning on the unit. Consult with your nearest dealer for installation solutions or if additional accessories are needed. b. Installing: The unit should be mounted to a dry, clean and flat surface so the installation remains fully watertight. Please make sure that the location has sufficient mounting depth to avoid damaging cables or fuel lines. The unit requires a 75mm diameter round hole. Cut the hole and install the unit into the opening as shown. Ensure the rear gasket is fully sealed to the mounting surface without distorting the unit. Use the mounting bracket to securely fasten the chassis of the unit. If the mounting bracket is too long, remove some breakaway segments. 66mm 75mm 89mm 41mm 5
LEFT GREY GREY/BLACK RIGHT GREY YELLOW B+ (BATTERY+) 6
7. Specifications AM/FM SECTION 1. Aus/NZ/Europe Frequency Range: FM87.5-108.0MHz AM522-1620KHz USA Frequency Range: FM87.9-107.9MHz AM530-1710KHz 2. Noise Limit Sensitivity... < 5uV MP3 SECTION 1. S/N Ratio... > 55dB 2. Frequency Response... 20-20KHz 3. A/D Conversion Filter... 16Bit AUDIO SECTION Power Output... 2 x 20W RMS Power... DC12V (Battery) Impedance... 4-8 Ohms/channel 7
MA1801 8