1U Device Expansion Unit Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your storage system. August 30, 2017 Revision 3.0 NEC Corporation
Contents TECHNICAL SPECIFICATION... 3 Key Features... 3 Specification... 3 EXTERNAL VIEWS... 4 Front and Rear Views... 4 Dimensions (mm)... 5 UNIT CONFIGURATION... 6 1 External Tape Drive Enclosure... 6 1.1 Tape Drive Configuration... 6 1.2 SAS Tape Drive Configuration... 7 1.3 USB RDX Drive Configuration... 9 1.4 SAS and USB Tape/RDX Drive Configuration... 11 COPYRIGHT NOTICE AND LIABILITY DISCLAIMER... 13 REVISION HISTORY... 14 NEC Corporation Revision 3.0 August, 2017 2
Technical Specification Key Features Affordable direct attached data protection solution for rack mount systems Two 5-inch half height drive bays in 1U enclosure Flexible configuration with SAS and USB tape drive installation Superior reliability with redundant power supplies Specification Model 1U Device Expansion Unit Part Number 5-inch Media Bays 2 Redundant Power Supply Power Supply Dimensions (W x D x H ) Maximum Power Consumption Maximum Weight N8141-69F Optional, non-hot plug 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz 424.0 x 578.1 x 44.0 mm / 16.7 x 22.7 x 1.7 in (1U) 328VA 6.1 kg, 13.45 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10 to 40 C / 50 to 104 F, 10 to 80% Non-Operating: -10 to 55 C / 14 to 131 F, 10 to 80% NEC Corporation Revision 3.0 August, 2017 3
External Views Front and Rear Views Front View A B C D E I F G H I Legend A. Power Switch 1 F. Error Status LED B. Ready LED G. Power Unit 2 Status LED C. Power Unit 1 Status LED H. Fan Unit 2 Status LED D. Fan Unit 1 Status LED I. Drive Bays E. Power Switch 2 Rear View B A C D E Legend A. AC Inlet D. External Connector 1 B. AC Inlet (Optional) E. External Connector 3 C. External Connector 2 NEC Corporation Revision 3.0 August, 2017 4
44 578 551 CONFIGURATION GUIDE 1U Device Expansion Unit Dimensions (mm) 425 484 NEC Corporation Revision 3.0 August, 2017 5
Unit Configuration 1 External Tape Drive Enclosure 1.1 Tape Drive Configuration Refer to the section in accordance with type of tape drives installed and number of host adapters. Type of Tape Drives Number of Host Adapters Section Internal LTO One SAS HBAs 1.2.1 Two SAS HBAs 1.2.2 Internal RDX One USB HBAs 1.3.1 Two USB HBAs 1.3.2 Mixing internal LTO and RDX Drives One SAS and one /USB HBAs 1.4 The tape drive enclosure can be shared with up to two servers, HBAs. See the figures below for typical tape drive bays configuration. Two HBA Configuration To HBA To HBA SAS Interface SAS Interface NEC Corporation Revision 3.0 August, 2017 6
1.2 SAS Tape Drive Configuration 1.2.1 One SAS HBA Connection Diagram Server Device Expansion Unit PCI Slot Internal Bay #1 Bay #2 P2 Redundant Power Supply Product List Category Product Name / Description Part Number Storage Controller Enclosure Power Supply Recommended Drive 2 slots available LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8 1 x LSILogic SAS9300-8e 12Gb/s SAS, 8(SFF-8644), PCIe3.0(x8) 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) LSI SAS9300-8e 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) External 2 m, 1 x SFF-8088 to 1 x SFF-8088 External SAS cable 2 m, 1x Mini SAS HD -1x Mini SAS 1U Device Expansion Unit 2 x 5-inch media bays Power Unit non-hot plug power supply Internal 1 x SFF-8088 to 2 x SFF-8482, mount bracket included LTO3, Half height, Native capacity 400 GB LTO4, Half height, Native capacity 800 GB LTO5, Half height, Native capacity 1.5 TB LTO6, Half height, Native capacity 2.5 TB LTO7, Half height, Native capacity 6 TB LTO5, Half height, Native capacity 1.5 TB LTO6, Half height, Native capacity 2.5 TB LTO7, Half height, Native capacity 6 TB N8103-142 N8803-041 N8103-197 N8103-184 K410-191(02) K410-322(02) N8141-69F N8181-124F K410-335(00) N8151-126 N8151-127 N8151-128 N8151-129 N8151-136 N8151-141 N8151-142 N8151-143 Refer to the system configuration of the server to select the appropriate SAS controller and internal LTO drive. Choose the appropriate SAS cable as follows: K410-191(02): N8103-142 K410-322(02): N8803-041, N8103-197, and N8103-184 NEC Corporation Revision 3.0 August, 2017 7
1.2.2 Two SAS HBA Connection Diagram Server Device Expansion Unit PCI Slot PCI Slot Internal Bay #1 Bay #2 P2 Redundant Pow er Supply Product List Category Product Name / Description Part Number Storage Controller 2 2 Enclosure Power supply Recommended 2 Drive 2 slots available LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8 1 x LSILogic SAS9300-8e 12Gb/s SAS, 8(SFF-8644), PCIe3.0(x8) 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) LSI SAS9300-8e 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) External 2 m, 1 x SFF-8088 to 1 x SFF-8088 External SAS cable 2 m, 1x Mini SAS HD -1x Mini SAS 1U Device Expansion Unit 2 x 5-inch media bays Power Unit non-hot plug power supply Internal 1 x SFF-8088 to 2 x SFF-8482, mount bracket included LTO3, Half height, Native capacity 400 GB LTO4, Half height, Native capacity 800 GB LTO5, Half height, Native capacity 1.5 TB LTO6, Half height, Native capacity 2.5 TB LTO7, Half height, Native capacity 6 TB LTO5, Half height, Native capacity 1.5 TB LTO6, Half height, Native capacity 2.5 TB LTO7, Half height, Native capacity 6 TB N8103-142 N8803-041 N8103-197 N8103-184 K410-191(02) K410-322(02) N8141-69F N8181-124F K410-335(00) N8151-126 N8151-127 N8151-128 N8151-129 N8151-136 N8151-141 N8151-142 N8151-143 Refer to the system configuration of the server to select the appropriate SAS controller and internal LTO drive. Choose the appropriate SAS cable as follows: K410-191(02): N8103-142 K410-322(02): N8803-041, N8103-197, and N8103-184 NEC Corporation Revision 3.0 August, 2017 8
1.3 USB RDX Drive Configuration 1.3.1 One USB Port Connection Diagram Server USB Connector USB Cable Bay #1 Bay #2 P2 Device Expansion Unit Redundant Power Supply Product List Category Product Name / Description Part Number Storage Controller USB Cable Enclosure Power Supply Recommended Drive 1 slot available External USB Controller 1 x USB port External USB Cable USB 2.0, 2 m, 1 x external USB to 1 x USB device, mount bracket included External USB Cable USB3.0,1.17 m, 1 x external USB to 1 x USB device, mount bracket included - The cable is required to connect with a USB3.0 port. 1U Device Expansion Unit 2 x 5-inch media bays Power Unit non-hot plug power supply (Standard) K410-197(00) K410-307(1A) N8141-69F N8181-124F Internal RDX (USB) N8151-125 Internal RDX (USB) N8151-139 Choose the appropriate USB cable according to the USB connector on the server. Refer to the system configuration of the server to select the appropriate internal RDX drive. NEC Corporation Revision 3.0 August, 2017 9
1.3.2 Two USB Ports Connection Diagram Server USB Connector USB Cable Bay #1 Bay #2 P2 Device Expansion Unit Redundant Pow er Supply USB Connector USB Cable Product List Category Product Name / Description Part Number Storage Controller USB Cable 2 Enclosure Power Supply Recommended Drive 1 slot per HBA available External USB Controller 1 x USB port External USB Cable USB 2.0, 2 m, 1 x external USB to 1 x USB device, mount bracket included External USB Cable USB3.0,1.17 m, 1 x external USB to 1 x USB device, mount bracket included - The cable is required to connect with a USB3.0 port. (Standard) K410-197(00) K410-307(1A) 1U Device Expansion Unit N8141-69F 2 x 5-inch media bays Power Unit N8181-124F non-hot plug power supply Internal RDX (USB) N8151-125 Internal RDX (USB) N8151-139 Choose an appropriate USB cable according to the USB connector on the server. Refer to the system configuration of the server to select the appropriate internal RDX drive. NEC Corporation Revision 3.0 August, 2017 10
1.4 SAS and USB Tape/RDX Drive Configuration Connection Diagram Server Device Expansion Unit PCI Slot Internal Bay #1 Bay #2 P2 Redundant Pow er Supply USB Connector USB Cable Product List Category Product Name / Description Part Number Storage Controller Storage Controller USB Cable Enclosure Power Supply Recommended Drive 1 slot per HBA available LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8 1 x LSILogic SAS9300-8e 12Gb/s SAS, 8(SFF-8644), PCIe3.0(x8), Low Profile / Full Height 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) LSI SAS9300-8e 12Gb/s SAS, Ext. 8(SFF-8644), PCIe3.0(x8) External USB Controller 1 x USB port External 2 m, 1 x SFF-8088 to 1 x SFF-8088 External SAS cable 2 m, 1x Mini SAS HD -1x Mini SAS External USB Cable USB 2.0, 2 m, 1 x external USB to 1 x USB device, mount bracket included External USB Cable USB3.0,1.17 m, 1 x external USB to 1 x USB device, mount bracket included - The cable is required to connect with a USB3.0 port. N8103-142 N8803-041 N8103-197 N8103-184 (Standard) K410-191(02) K410-322(02) K410-197(00) K410-307(1A) 1U Device Expansion Unit N8141-69F 2 x 5-inch media bays Power Unit N8181-124F non-hot plug power supply Internal K410-335(00) 1 x SFF-8088 to 2 x SFF-8482 LTO N8151-126 LTO3, Half height, Native capacity 400 GB N8151-127 LTO4, Half height, Native capacity 800 GB N8151-128 LTO5, Half height, Native capacity 1.5 TB N8151-129 LTO6, Half height, Native capacity 2.5 TB N8151-136 LTO7, Half height, Native capacity 6 TB N8151-141 LTO5, Half height, Native capacity 1.5 TB N8151-142 LTO6, Half height, Native capacity 2.5 TB N8151-143 LTO7, Half height, Native capacity 6 TB RDX Internal RDX (USB) N8151-125 NEC Corporation Revision 3.0 August, 2017 11
Internal RDX (USB) N8151-139 Refer to the system configuration of the server to select the appropriate SAS controller and internal LTO drive. Choose the appropriate SAS cable as follows: K410-191(02): N8103-142 K410-322(02): N8803-041, N8103-197, and N8103-184 Choose an appropriate USB cable according to the USB connector on the server. Refer to the system configuration of the server to select the appropriate internal RDX drive. NEC Corporation Revision 3.0 August, 2017 12
Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. NEC Corporation Revision 3.0 August, 2017 13
Revision History Revision Date Description 3.0 August 30, 2017 New products added: / N8151-141 / N8151-142 / N8151-143 Internal RDX (USB) / N8151-139 Others: Added and cable information for new servers. 2.0 July 20, 2016 New products added: / N8151-136 Others: Added and cable information for R320e. 1.0 October 23, 2015 Initial release NEC Corporation Revision 3.0 August, 2017 14