Weatherproof Boxes, Covers, Lampholders & Lighting Fixtures

FG2 FG2 Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures Applications: Use in branch circuit wiring for wet, damp, or dry locations May be used as a junction box or a device box for switches, receptacles, GFCI s, etc. Lampholders are for use in exterior and interior applications to provide safety and security for driveways, doorways, and walkways. Lighting Fixtures are for use in areas where moisture ingress is a concern such as construction sites, tunnels, bridges, subways. Features and Benefits: Rugged continuous and seamless die cast construction prevents entry of dirt, dust and moisture. Powder coating is applied for uniform cosmetic coating and weatherproof durability. Mounting can be achieved with mounting lugs (provided) or by using the integral mounting knockouts. Smooth, accurately tapped hubs prevent wire abrasion. Clear UL marking and volumetric marking cast into each box and extension ring facilitate electrical inspection. Continuous box and cover compression ensure complete sealing at gasket interface to prevent moisture entry. Lockable covers and covers with integral devices are offered. Closure plugs (2), mounting lugs (2) and green ground screw provided with each box. Mounting hardware and gasket provided with each cover. Locking swivel knuckle on lampholders permits positive lamp positioning and accurate directional aiming. Lampholders are supplied with all hardware including locknuts, porcelain sockets and internal gaskets for reliability and weather protection. Photocells and lampholders are supplied with long leads (4 from the end of the knuckle) to facilitate wiring. Lighting fixtures are factory assembled and fully gasketed to ensure fast and easy installation. Complete installation instructions are provided with each item. Sturdy corrugated boxes with easy lift off top facilitate merchandising. In-Use covers include: patented inserts and comply with NEC requirements. Most of the boxes, covers, and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Lighting fixtures are individually boxed, labeled, and bar coded for ease of handling and identification. Well-marked outer boxes combined with shrink wrapping facilitate merchandising. Materials: Boxes, Extensions, Covers, Lampholders, Lighting Fixtures, and Closure plugs: Zinc Die Cast. In-Use covers: polycarbonate. Most of the boxes, covers, and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Lugs: Stamped Aluminum (One and two gang boxes), Integrally cast (round boxes). Cover screws: Plated Steel. Gaskets: Closed cell foam (covers), Fiber (lampholders), Closed cell foam or Fiber (lighting fixtures). Glass: Annealed glass. Sockets: Porcelain (lampholders and lighting fixtures). Compliances: UL and cul Listed.

FG3 FG3 Capacity of Steel Boxes and Covers 314.16 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for all enclosed conductors. In no case shall the volume of the box, as calculated in 314.16(A), be less than the fill calculation as calculated in 314.16(B). The minimum volume for conduit bodies shall be as calculated in 314.16(C). The provisions of this section shall not apply to terminal housings supplied with motors. FPN: For volume requirements of motor terminal housings, see 430.12. Boxes and conduit bodies enclosing conductors 4 AWG or larger shall also comply with the provisions of 314.28. (A) Box Volume Calculations. The volume of a wiring enclosure (box) shall be the total volume of the assembled sections and, where used, the space provided by plaster rings, domed covers, extension rings, and so forth, that are marked with their volume or are made from boxes the dimensions of which are listed in Table 314.16(A). (1) Standard Boxes. The volumes of standard boxes that are not marked with their volume shall be as given in Table 314.16(A). (2) Other Boxes. Boxes 1650 cm3 (100 in.3) or less, other than those described in Table 314.16(A), and nonmetallic boxes shall be durably and legibly marked by the manufacturer with their volume. Boxes described in Table 314.16(A) that have a volume larger than is designated in the table shall be permitted to have their volume marked as required by this section. Table 314.16(A) Metal Boxes Box Trade Size Minimum Volume Maximum Number of Conductors* mm in. cm3 in.3 18 16 14 12 10 8 6 100 32 (4 1¼) round/octagonal 205 12.5 8 7 6 5 5 5 2 100 38 (4 1½) round/octagonal 254 15.5 10 8 7 6 6 5 3 100 54 (4 2) round/octagonal 353 21.5 14 12 10 9 8 7 4 100 32 (4 1¼) square 295 18.0 12 10 9 8 7 6 3 100 38 (4 1½) square 344 21.0 14 12 10 9 8 7 4 100 54 (4 2) square 497 30.3 20 17 15 13 12 10 6 120 32 (4 1¼) square 418 25.5 17 14 12 11 10 8 5 120 38 (4 1½) square 484 29.5 19 16 14 13 11 9 5 120 54 (4 2) square 689 42.0 28 24 21 18 16 14 8 75 50 38 (3 2 1½) device 123 7.5 5 4 3 3 3 2 1 75 50 50 (3 2 2) device 164 10.0 6 5 5 4 4 3 2 75 50 57 (3 2 2¼) device 172 10.5 7 6 5 4 4 3 2 75 50 65 (3 2 2½) device 205 12.5 8 7 6 5 5 4 2 75 50 70 (3 2 2¾) device 230 14.0 9 8 7 6 5 4 2 75 50 90 (3 2 3½) device 295 18.0 12 10 9 8 7 6 3 100 54 38 (4 2 1½) device 169 10.3 6 5 5 4 4 3 2 100 54 48 (4 2 1) device 213 13.0 8 7 6 5 5 4 2 100 54 54 (4 2 2) device 238 14.5 9 8 7 6 5 4 2 95 50 65 (3¾ 2 2½) masonry box/gang 230 14.0 9 8 7 6 5 4 2 95 50 90 (3¾ 2 3½) masonry box/gang 344 21.0 14 12 10 9 8 7 4 min. 44.5 depth FS single cover/gang (1¾) 221 13.5 9 7 6 6 5 4 2 min. 60.3 depth FD single cover/gang (2) 295 18.0 12 10 9 8 7 6 3 min. 44.5 depth FS multiple cover/gang (1¾) 295 18.0 12 10 9 8 7 6 3 min. 60.3 depth FD multiple cover/gang (2) 395 24.0 16 13 12 10 9 8 4 *Where no volume allowances are required by 314.16(B)(2) through (B)(5). (1) Conductor Fill. Each conductor that originates outside the box and terminates or is spliced within the box shall be counted once, and each conductor that passes through the box without splice or termination shall be counted once. A looped, unbroken conductor not less than twice the minimum length required for free conductors in 300.14 shall be counted twice. The conductor fill shall be calculated using Table 314.16(B). A conductor, no part of which leaves the box, shall not be counted. Exception: An equipment grounding conductor or conductors or not over four fixture wires smaller than 14 AWG, or both, shall be permitted to be omitted from the calculations where they enter a box from a domed luminaire (fixture) or similar canopy and terminate within that box. (2) Clamp Fill. Where one or more internal cable clamps, whether factory or field supplied, are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made based on the largest conductor present in the box. No allowance shall be required for a cable connector with its clamping mechanism outside the box. (3) Support Fittings Fill. Where one or more luminaire (fixture) studs or hickeys are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made for each type of fitting based on the largest conductor present in the box. (4) Device or Equipment Fill. For each yoke or strap containing one or more devices or equipment, a double volume allowance in accordance with Table 314.16(B) shall be made for each yoke or strap based on the largest conductor connected to a device(s) or equipment supported by that yoke or strap. Table 314.16(B) Volume Allowance Required per Conductor Free Space Within Box for Each Conductor Size of Conductor (AWG) cm3 in.3 18 24.6 1.50 16 28.7 1.75 14 32.8 2.00 12 36.9 2.25 10 41.0 2.50 8 49.2 3.00 6 81.9 5.00 (5) Equipment Grounding Conductor Fill. Where one or more equipment grounding conductors or equipment bonding jumpers enter a box, a single volume allowance in accordance with Table 314.16(B) shall be made based on the largest equipment grounding conductor or equipment bonding jumper present in the box. Where an additional set of equipment grounding conductors, as permitted by 250.146(D), is present in the box, an additional volume allowance shall be made based on the largest equipment grounding conductor in the additional set. 406.8 Receptacles in Damp or Wet Locations. (B) Wet Locations. (1) 15- and 20-Ampere Receptacles in a Wet Location. 15- and 20-ampere, 125- and 250-volt receptacles installed in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted. (2) Other Receptacles. All other receptacles installed in a wet location shall comply with (B)(2)(a) or (B)(2)(b). (a) A receptacle installed in a wet location, where the product intended to be plugged into it is not attended while in use, shall have an enclosure that is weatherproof with the attachment plug cap inserted or removed. (b) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (e.g., portable tools) shall have an enclosure that is weatherproof when the attachment plug is removed. (B) Box Fill Calculations. The volumes in paragraphs 314.16(B)(1) through (B)(5), as applicable, shall be added together. No allowance shall be required for small fittings such as locknuts and bushings. Reproduced with permission of NFPA.

FG4 One Gang Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG4 WSL150 WSL175 WSM150 WSM175 WSM110 WSP150 WSP175 WSX150 WSX175 WSX110 WDM150 WDM175 WDM110 WDX150 WDX175 WDX110 WE1 Extension Adapter Gasket and Screws Included WEFX50 WEFX75 Flanged Extension Adapter Gasket and Screws Included Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WSL150* 2 18.3 1 2 4 Shrink Wrapped 61 20 WSL175* 2 18.3 3 4 4 Shrink Wrapped 61 20 WSM150* 2 18.3 1 2 3 Shrink Wrapped 58 20 WSM175* 2 18.3 3 4 3 Shrink Wrapped 57 20 WSM110 2 18.3 1 3 Shrink Wrapped 56 20 WSP150* 2 18.3 1 2 5 Shrink Wrapped 60 20 WSP175* 2 18.3 3 4 5 Shrink Wrapped 57 20 WSX150 2 18.3 1 2 5 Shrink Wrapped 60 20 WSX175 2 18.3 3 4 5 Shrink Wrapped 60 20 WSX110 2 18.3 1 5 Shrink Wrapped 60 20 WDM150* 2 5 8 23.8 1 2 3 Shrink Wrapped 108 12 WDM175 2 5 8 23.8 3 4 3 Shrink Wrapped 108 12 WDM110 2 5 8 23.8 1 3 Shrink Wrapped 108 12 WDX150 2 5 8 23.8 1 2 5 Shrink Wrapped 83 12 WDX175 2 5 8 23.8 3 4 5 Shrink Wrapped 83 12 WDX110 2 5 8 23.8 1 5 Shrink Wrapped 83 12 WE1* 1 10.0 Shrink Wrapped 30 24 WEFX50* 1 1 2 13.3 1 2 4 Shrink Wrapped 58 12 WEFX75* 1 1 2 13.3 3 4 4 Shrink Wrapped 67 12 * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG5 Dimensions: One Gang Boxes and Extensions FG5 Catalog Number A B C D E F G H J WSL150 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 1 1 2 WSL175 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 1 1 2 WSM150 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WSM175 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WSM110 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WSP150 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 1 1 2 WSP175 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 1 1 2 WSX150 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WSX175 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WSX110 2 13 16 2 5 8 3 1 16 3 1 2 3 1 4 1 7 8 WDM150 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 WDM175 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 WDM110 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 WDX150 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 WDX175 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 WDX110 2 13 16 2 5 8 3 4 3 1 16 3 1 2 3 1 4 1 7 8 F End View End One View Outlet One Outlet E H B J End End View View Two Outlets D C G A C D 2 7 8 2 7 /8" 3 1 2 3 1 /2" 2 9 /16" 9 16 Extension WE1 3 9 32 4 5 8 3 9 /32" 4 5 /8" 2 3 /4" 5 1 /4" Flanged Extension Adapter WEFX50 WEFX75 2 3 4 5 1 4 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add take-offs to new boxes and/or devices.

FG6 Two Gang Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG6 WSK250 WSK275 WSL250 WSL275 WSM250 WSM275 WSM210 WSP250 WSP275 WSR250 WSR275 WST250 WST275 WSX250 WSX275 WSX210 WDK250 WDK275 WDK210 WDP250 WDP275 WDP210 WE2 Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WSK250 2 30.5 1 2 7 Shrink Wrapped 108 12 WSK275 2 30.5 3 4 7 Shrink Wrapped 108 12 WSL250* 2 30.5 1 2 4 Shrink Wrapped 108 12 WSL275* 2 30.5 3 4 4 Shrink Wrapped 108 12 WSM250* 2 30.5 1 2 3 Shrink Wrapped 108 12 WSM275* 2 30.5 3 4 3 Shrink Wrapped 108 12 WSM210* 2 30.5 1 3 Shrink Wrapped 108 12 WSP250* 2 30.5 1 2 5 Shrink Wrapped 108 12 WSP275* 2 30.5 3 4 5 Shrink Wrapped 108 12 WSR250 2 30.5 1 2 6 Shrink Wrapped 108 12 WSR275 2 30.5 3 4 6 Shrink Wrapped 108 12 WST250 2 30.5 1 2 7 Shrink Wrapped 108 12 WST275 2 30.5 3 4 7 Shrink Wrapped 108 12 WSX250 2 30.5 1 2 5 Shrink Wrapped 108 12 WSX275 2 30.5 3 4 5 Shrink Wrapped 108 12 WSX210 2 30.5 1 5 Shrink Wrapped 108 12 WDK250 2 5 8 40.3 1 2 7 Shrink Wrapped 117 6 WDK275 2 5 8 40.3 3 4 7 Shrink Wrapped 117 6 WDK210 2 5 8 40.3 1 7 Shrink Wrapped 117 6 WDP250 2 5 8 40.3 1 2 5 Shrink Wrapped 117 6 WDP275 2 5 8 40.3 3 4 5 Shrink Wrapped 117 6 WDP210 2 5 8 40.3 1 5 Shrink Wrapped 117 6 WE2* 1 16.3 Shrink Wrapped 33 12 * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG7 Dimensions: Two Gang Boxes and Extensions FG7 Catalog Number A B C D E F G H J K L WSK250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSK275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSL250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSL275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSM250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSM275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSM210 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSP250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSP275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSR250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSR275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WST250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WST275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WSX250 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSX275 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WSX210 4 5 18 2 5 8 5 3 7 8 3 11 16 3 3 4 3 1 4 WDK250 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WDK275 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WDK210 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WDP250 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WDP275 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 WDP210 4 5 18 2 5 8 3 4 5 3 7 8 3 11 16 3 3 4 1 1 2 3 1 4 A G 4 5 8 4 5 /8" 4 5 8 4 5 /8" 3 5 /8" 3 5 8 J E H B K K 3 3 /4" 3 3 4 D C L F 1 1" Extension WE2 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add take-offs to new boxes and/or devices.

FG8 Round Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG8 WRX50 WRX75 WRX50CG WRX75CG Cover and gasket included WERX50 WERX75 Extension Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WRX50* 2 16.5 1 2 5 Shrink Wrapped 75 16 WRX75* 2 16.5 3 4 5 Shrink Wrapped 75 16 WRX50CG* 2 16.5 1 2 5 Shrink Wrapped 75 16 WRX75CG* 2 16.5 3 4 5 Shrink Wrapped 75 16 WERX50 2 18.3 1 2 4 Shrink Wrapped 56 18 WERX75 2 18.3 3 4 4 Shrink Wrapped 56 18 * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Dimensions: 5 5 8 5 5 /8" 3 1 2 3 1 /2" 3 1 2 3 1 /2" 1 9 /16" 9 16 33 /4" 4 4 15 16 4 15 /16" 2 3 4 2 3 /4" 4 5 /16" 5 16 WRX50 WRX75 WRX50CG WRX75CG 3 1 2 3 1 /2" 2 3 4 2 3 /4" 3 1 /2" 2 3 /4" 2 3 4 3 1 2 1 9 1/16" 9 16 3 /4" 4 4 5 4/16" 5 16 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Extension WERX50 WERX75 Adapters allow installer to add take-offs to new boxes and/or devices.

FG9 Weatherproof Lampholders FG9 Die cast construction. Locking swivel knuckle permits lamp positioning and aiming. Supplied with porcelain sockets, gaskets, extra long leads, locknut and other hardware. For aiming horizontal or downward. For use with 150W maximum lamps. WLU1 WLI WL68 Catalog No. Description Color Packaging Wt. Per 100 Case Qty WLU1 Unfinished Lampholder Metal Boxed 50 50 WLI* Finished Lampholder Grey Shrink Wrapped 52 27 WL68* Lampholder w/5 1 8 hood Grey Boxed 117 6 * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Dimensions: 5 1 /4" 4 3 3" WLU1 WLI 33 1 /2" 1 2 6 7 /8" 7 8 WL68

FG10 One Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. FG10 On On Off Off WCB1 WCB14 WCT1 WCT115 WCT113 WCE1 WC1150 WC1250 WC1350 WC11L WC12L For horizontal to downward aiming (For use with 150W max. lamp) Catalog For use Wt Per Case Number Description Orientation with devices Color Packaging 100 (lbs) Qty WCB1* Blank Cover, 2-screws Universal Grey Shrink Wrapped 10 42 (Stamped Aluminum) WCB14* Blank Cover, 4-screws Universal Grey Shrink Wrapped 10 42 (Stamped Aluminum) WCT1* Toggle Switch Cover Vertical Switch (10A - 20A) Grey Shrink Wrapped 25 20 WCT115* Toggle Switch Cover Vertical Switch (15A, 1-pole) Grey Shrink Wrapped 56 18 w/switch included WCT113* Toggle Switch Cover Vertical Switch (15A, 3 Way) Grey Shrink Wrapped 56 18 w/switch included WCE1 Cover with Photocell Universal Photocell (120A, 300W) Grey Shrink Wrapped 30 10 (Stamped Aluminum) included WC1150* Raised Cover, one Universal 1 Photocell or Grey Shrink Wrapped 30 20 1 2 hub lampholder WC1250* Raised Cover, two Universal 2 Photocells or Grey Shrink Wrapped 30 20 1 2 hubs lampholders WC1350* Raised Cover, three Universal 3 Photocells or Grey Shrink Wrapped 30 20 1 2 hubs lampholders WC11L* Raised Cover, one 1 2 Universal 1 Lampholder Grey Shrink Wrapped 81 8 hub with lampholder included WC12L* Raised Cover, two 1 2 Universal 2 Lampholders Grey Shrink Wrapped 125 8 hubs with lampholders included * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG11 Dimensions: One Gang Covers FG11 2 13 16 2 13 16 3 9 32 3 9 32 WCB1 WCE1 2 13 16 2 13 16 3 1 4 2 1 2 1 7 8 WCB14 WCT1 WCT113 WCT115 4 1 2 4 1 2 4 1 2 2 7 8 WC1150 WC11L 2 7 8 WC1250 2 7 8 WC1350 WC12L 1 1 16

FG12 FG12 One Gang Weatherproof Covers and In-Use Covers Die Cast Metal. Gasket and mounting hardware included. WHS1 WVS1 WVP211 WVP161 WCDIU1 (In-Use deep cover) WVP21L1 WCIU1 (In-Use cover) Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVS1* Self Closing Cover Vertical Single Recept or Switch Grey Shrink Wrapped 33 24 WHS1* Self Closing Cover Horizontal Single Recept or Switch Grey Shrink Wrapped 33 24 WVP211 Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped 63 24 Cover (2.125 opening) WVP161 Self Closing Power Outlet Vertical Single Recept Grey Shrink Wrapped 63 24 Cover (1.625 opening) (20A or 30A) WVP21L1 Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped 75 24 Cover (2.125 opening) WCIU1 In-Use Cover, 2 7 8 Universal Clear Shrink Wrapped 49 6 deep (Polycarbonate) WCDIU1 In-Use Cover, 3 1 2 Universal Clear Shrink Wrapped 46 4 deep (Polycarbonate) * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Hasp diameter 3/16. Lock not included. Provided with inserts, devices not included. Effective November, 2011 Copyright 2011

FG13 Dimensions: One Gang Covers and In-Use Inserts FG13 2 13 15 2 3 8 2 13 16 WHS1 2 3 8 Diameter 1.475 DIA. Diameter WVS1 2.125 2 13 16 DIA. WCIU1 and WCDIU1 Inserts 3 inserts produce 14 configurations Single gang In-Use inserts can be used in both vertical and horizontal applications, by simply changing the hinge points. 3 13 16 Diameter WVP211 2.125 WVP161 1.625 WVP21L1 2.125

FG14 FG14 One Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. WHD1 WHDO1 (Stay Open) WVD1 WVDL1 WHD1WR Cover and Receptacle WHG1 WVG1 Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVD1* Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped 33 24 WVDL1 Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped 33 24 WHD1* Self Closing Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped 42 24 WHDO1* Stay Open Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped 42 24 WHD1WR* Self Closing Horizontal Duplex Recept Grey Shrink Wrapped 67 18 Cover w/recept (15A, 120V) incl. WHG1* Self Closing Cover Horizontal GFCI Grey Shrink Wrapped 50 24 WVG1* Self Closing Cover Vertical GFCI Grey Shrink Wrapped 50 24 * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Hasp diameter 3/16. Lock not included.

FG15 Dimensions: One Gang Covers FG15 2 13 16 4 1 2 2 3 4 WHD1 WHDO1 WHD1WR WVD1 WVDL1 2 13 16 1 11 32 2 13 16 2 21 32 2 21 32 3 13 16 3 13 16 WHG1 1 11 32 WVG1

FG16 Two Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. FG16 WCB24 WVSG2 WVDG2 WVGG2 WVTG2 WVTT2 WVTT215 WVTT213 WVTT220 Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WCB24* Blank Cover Universal Grey Shrink Wrapped 13 24 (Stamped Aluminum) WVSG2* Self Closing Cover Vertical Single Recept + GFCI Grey Shrink Wrapped 50 18 WVDG2* Self Closing Cover Vertical Duplex Recept + GFCI Grey Shrink Wrapped 50 18 WVGG2* Self Closing Cover Vertical 2 GFCI Grey Shrink Wrapped 50 18 WVTG2* Self Closing Cover Vertical Switch (10 A - 20A) + GFCI Grey Shrink Wrapped 50 18 WVTT2* Toggle Switch Cover Vertical 2 Switches (15A - 20A) Grey Shrink Wrapped 46 24 (Stamped Aluminum) WVTT215 Toggle Switch Cover Vertical 2 Switches (15A, 1-Pole) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches WVTT213 Toggle Switch Cover Vertical 2 Switches (15A, 3-way) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches WVTT220 Toggle Switch Cover Vertical 2 Switches (20A, 1-Pole) incl. Grey Shrink Wrapped 89 18 (Stamped Aluminum) with switches * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG17 Dimensions: Two Gang Covers FG17 3 9 32 3 5 8 2 21 32 1 13 16 1 11 32 WCB24 WVSG2 3 5 8 3 5 8 2 21 32 WVDG2 1 11 32 WVGG2 1 11 32 2 21 32 2 3 8 3 9 32 2 3 8 1 11 32 WVTG2 WVTT2, WVTT2 15 WVTT213, WVTT2 20

FG18 Two Gang Weatherproof Covers and In-Use Covers Die Cast Metal. Gasket and mounting hardware included. FG18 WVDD2 WVSD2 WVSS2 WCIU2 (In-Use Cover ONLY) Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVDD2* Self Closing Cover Vertical 2 Duplex Recept or Switches Grey Shrink Wrapped 56 18 WVSD2* Self Closing Cover Vertical Single Recept + Duplex Recept Grey Shrink Wrapped 61 18 WVSS2* Self Closing Cover Vertical 2 Single Recept or Switches Grey Shrink Wrapped 56 18 WCIU2 In-Use Cover, 2 5 8 Vertical Clear Shrink Wrapped 56 6 Deep (Polycarbonate) * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Provided with inserts, devices not included. Effective November, 2011 Copyright 2011

FG19 Dimensions: Two Gang Covers and In-Use Inserts FG19 9 /16" 44 9 /16" 9 16 4 9 /16" 16 2 3 8 /8" 4 9 9 /16" 16 1 13 /16" WVDD2 1 13 /16" 1 13 16 1 13 16 WVSD2 4 9 4/16" 9 16 2 3 8 /8" 4 9 /16" 9 16 WVSS2 11 13 13 /16" 16 WCIU2 Inserts 6 inserts produce 70 configurations Two gang In-Use convertible inserts snap together to create combinations for almost every application.

FG20 Round Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. Lampholders are adjustable. Porcelain sockets. FG20 WCBR WCR150 WCR250 WCR350 WCR2L For horizontal to downward aiming For use with 150W max. lamp Box not included WCRD2LW For use with 150W max. lamp Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WCBR* Blank Cover, 4 OD Universal Grey Shrink Wrapped 20 50 (Stamped Aluminum) WCR150* Raised Cover, Universal 1 Photocell or lampholder Grey Shrink Wrapped 42 24 One 1 2 hub WCR250* Raised Cover, Universal 2 Photocells or lampholders Grey Shrink Wrapped 42 24 Two 1 2 hubs WCR350* Raised Cover, Universal 3 Photocells or lampholders Grey Shrink Wrapped 42 24 Three 1 2 hubs WCR2L* Raised Cover, two 1 2 Universal 2 Lampholders included Grey Shrink Wrapped 131 8 hubs with lampholders WCRD2LW Ceiling plate (deep) Universal 2 Lampholders included White Boxed 175 8 with lampholders * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

FG21 Dimensions: Round Covers FG21 3 3 1 1 2 /2" 22 3 /4" 3 4 3 1 3/2" 1 2 4 1 4/4" 1 4 WCBR WCR150 3 1 /2" 1 2 3 11 /2" 2 44 1 /2" 1 2 22 3 /4" 3 4 2 3 /4" 3 4 WCR250 Additional Additional knock-outs knock-outs provided for mounting provided for mounting to 3 1 2 Round to 3 1 box. /2" Round box. WCR350, WCR2L 9 /16" 9 16 55 3 /16" 3 16 1" 1 5 1 /2" 1 2 3 /16" 16 Hole 44 1 /2" 1 2 WCRD2LW

FG22 Weatherproof Incandescent Fixtures FG22 Rugged, seamless die cast construction. Factory assembled with guard, 120Volt rated. Ground screw, closure plugs and mounting lugs included. Use with 150 C supply wire. Use with medium base incandescent lamps. Grey color. WFA1050G WFA1075G WFA2050G WFA2075G WFC1050G WFC1075G WFC2050G WFC2075G WFW1050G WFW1075G WFW2050G WFW2075G Catalog Mounting No. of Wt per Case Number Style Hub Size Hubs Wattage Packaging 100 (lbs) Qty WFA1050G Pendant 1 2 1 100 Boxed 267 1 WFA1075G Pendant 3 4 1 100 Boxed 267 1 WFA2050G Pendant 1 2 1 200 Boxed 410 1 WFA2075G Pendant 3 4 1 200 Boxed 410 1 WFC1050G Ceiling 1 2 5 100 Boxed 267 1 WFC1075G Ceiling 3 4 5 100 Boxed 267 1 WFC2050G Ceiling 1 2 5 200 Boxed 420 1 WFC2075G Ceiling 3 4 5 200 Boxed 420 1 WFW1050G Wall 1 2 5 100 Boxed 380 1 WFW1075G Wall 3 4 5 100 Boxed 380 1 WFW2050G Wall 1 2 5 200 Boxed 510 1 WFW2075G Wall 3 4 5 200 Boxed 510 1

FG23 Dimensions: Incandescent Fixtures FG23 B D Catalog Number A B C D WFA1050G 3 11 16 8 3 16 4 1 4 9 5 8 WFA1075G 3 11 16 8 3 16 4 1 4 9 5 8 WFA2050G 4 3 8 10 1 2 5 1 2 11 WFA2075G 4 3 8 10 1 2 5 1 2 11 A C B D Catalog Number A B C D WFC1050G 3 11 16 8 5 8 4 1 4 9 1 8 WFC1075G 3 11 16 8 5 8 4 1 4 9 1 8 WFC2050G 4 3 8 10 1 2 5 1 2 10 3 4 WFC2075G 4 3 8 10 1 2 5 1 2 10 3 4 A C E F B D Catalog Number A B C D E F WFW1050G 3 11 16 7 1 4 4 1 4 7 3 4 4 1 2 4 1 4 WFW1075G 3 11 16 7 1 4 4 1 4 7 3 4 4 1 2 4 1 4 WFW2050G 4 3 8 8 3 4 5 1 2 9 1 4 4 1 2 4 1 2 WFW2075G 4 3 8 8 3 4 5 1 2 9 1 4 4 1 2 4 1 2 A C

FG24 Weatherproof Accessories and Replacement Parts FG24 WSWITCH WPHOTO WPHOTO50 WGD Accessories Catalog Electrical Wt. Per Case Number Rating Description Color Packaging 100 (lbs) Qty WSWITCH 120 Volt, 5 Amp Automated Door Metal Shrink Wrapped 10 24 Operated Light Switch WPHOTO 120 Volt, 300 Watt Photoelectric Night Shrink Wrapped 13 24 Switch with Time Delay for Lamp Posts WPHOTO50 120 Volt, 300 Watt Photoelectric Night Grey Shrink Wrapped 29 24 Switch with Time Delay 1 2 NPT w/locknut WGD Guard for Floodlight, Fits Chrome Shrink Wrapped 50 5 WLI and WLU1 Lampholders Replacement Parts Catalog Wt Per Case Number Description Color Packaging 100 (lbs) Qty WGSK1 Universal 1 gang gasket Black Shrink Wrapped 4 50 WGSK2 Universal 2 gang gasket Black Shrink Wrapped 2 50 WGSKD1 1 gang gasket, single and Black Shrink Wrapped 2 50 duplex covers WGSKEL External lampholder gasket Black Shrink Wrapped 6 50 WGSKIL Internal lampholder gasket Black Shrink Wrapped 0.3 600 WGSKR Universal round gasket Black Shrink Wrapped 2 50 WLUGS 2 Mounting lugs w/ screws Grey Boxed 1 100 WPLG104* 4 1 Closure Plugs Grey Shrink Wrapped 18 50 WPLG504* 4 1 2 Closure Plugs Grey Shrink Wrapped 8 75 WPLG754* 4 3 4 Closure Plugs Grey Shrink Wrapped 12 50 WSCR832 Ground Screw, Self Tapping, Green Boxed 0.52 100 #8-32 x 1 4 WSOCKET Porcelain socket Grey Boxed 12 25 WFG1 Heavy duty wire guard for Boxed 80 5 100 watt fixtures, #8 AWS WFG2 Heavy duty wire guard for Boxed 100 1 200 watt fixtures, #8 AWS WFGL1 Glass globe for 100 watt Boxed 150 1 lighting fixtures WFGL2 Glass globe for 200 watt Boxed 200 1 lighting fixtures * Catalog number shown represents grey color. White (Suffi x W) and Bronze (Suffi x B) also available. Consult factory for lead time.