In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Similar documents
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

300 V, 100 ma PNP high-voltage transistor

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

NCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

45 V, 100 ma NPN general-purpose transistors

General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.

2PB709ARL; 2PB709ASL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

MMBZ16VAL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

PTVSxS1UR series. 1. Product profile. 400 W Transient Voltage Suppressor. 1.1 General description. 1.2 Features and benefits. 1.

General-purpose Zener diodes in an SOD523 (SC-79) ultra small and flat lead Surface-Mounted Device (SMD) plastic package.

Bidirectional ESD protection diode

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

Dual back-to-back Zener diode

PTVSxP1UP series. 600 W Transient Voltage Suppressor

PMEG2010EH; PMEG2010EJ; PMEG2010ET

PMEG1030EH; PMEG1030EJ

PESD5V0X2UM. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

PMEG3015EH; PMEG3015EJ

PESD18VV1BBSF. Very symmetrical bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information

74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0C1USF. in portable electronics, communication, consumer and computing devices.

PESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

Unidirectional ESD protection diode

SiGe:C Low Noise High Linearity Amplifier

Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance

PESD12VV1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Femtofarad bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IMPORTANT NOTICE. use

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD1IVN-U. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

Ultra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports

DATA SHEET. BGA2031/1 MMIC variable gain amplifier DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 2000 Mar 02.

ESD protection for ultra high-speed interfaces

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL

PESD5V0V1BA; PESD5V0V1BB; PESD5V0V1BL

PESD3V6Z1BCSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0L1BSF. Ultra low profile bidirectional low capacitance ESD protection diode

NWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC

1 GHz wideband low-noise amplifier with bypass. The LNA is housed in a 6-pin SOT363 plastic SMD package.

PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL

PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.

PUSB3AB4. 1. Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.

GreenChip synchronous rectifier controller. The TEA1792TS is fabricated in a Silicon-On-Insulator (SOI) process.

PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet

PESD4V0Z1BSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior.

Ultra low capacitance bidirectional ESD protection diode

IP4285CZ9-TBB. ESD protection for high-speed interfaces

IP4234CZ6. 1 Product profile. Single USB 2.0 ESD protection to IEC level General description. 1.2 Features. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESDxUSB3S series. ESD protection for differential data lines

MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.

PESD2V0Y1BSF. Extremely low capacitance bidirectional ESD protection diode

PESD3V3Y1BSF. Extremely low capacitance bidirectional ESD protection diode

plastic surface-mounted package; 5 leads D (double) Package type descriptive code TSOP5 Package type industry code

LD6815 series. 1. Product profile. Low dropout regulators, high PSRR, 150 ma. 1.1 General description. 1.2 Features and benefits. 1.

550 MHz, 34 db gain push-pull amplifier

D (double) Package type descriptive code. SMT3; MPAK Package type industry code. SMT3; MPAK Package style descriptive code

Transcription:

Important notice Dear Customer, On 7 February 207 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - NXP N.V. (year). All rights reserved or Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

PDTC4Z series NPN resistor-equipped transistors; R = 4.7 k, R2 = 47 k Rev. 8 5 December 20 Product data sheet. Product profile. General description NPN Resistor-Equipped Transistor (RET) family in Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package PNP Package NXP JEITA JEDEC complement configuration PDTC4ZE SOT46 SC-75 - PDTA4ZE ultra small PDTC4ZM SOT88 SC- - PDTA4ZM leadless ultra small PDTC4ZT SOT2 - TO-26AB PDTA4ZT small PDTC4ZU SOT2 SC-70 - PDTA4ZU very small.2 Features and benefits 0 ma output current capability Reduces component count Built-in bias resistors Reduces pick and place costs Simplifies circuit design AEC-Q qualified. Applications Digital applications in automotive and industrial segments Control of IC inputs Switching loads.4 Quick reference data Cost-saving alternative for BC847/857 series in digital applications Table 2. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V CEO collector-emitter voltage open base - - 50 V I O output current - - 0 ma R bias resistor (input). 4.7 6. k R2/R bias resistor ratio 8 2

PDTC4Z series 2. Pinning information Table. Pinning Pin Description Simplified outline Graphic symbol SOT2; SOT2; SOT46 input (base) 2 GND (emitter) output (collector) R 2 006aaa44 R2 sym007 2 SOT88 input (base) 2 GND (emitter) output (collector) 2 Transparent top view R R2 2 sym007. Ordering information Table 4. Ordering information Type number Package Name Description Version PDTC4ZE SC-75 plastic surface-mounted package; leads SOT46 PDTC4ZM SC- leadless ultra small plastic package; solder lands; SOT88 body.0 0.6 0.5 mm PDTC4ZT - plastic surface-mounted package; leads SOT2 PDTC4ZU SC-70 plastic surface-mounted package; leads SOT2 4. Marking Table 5. Marking codes Type number Marking code [] PDTC4ZE 8 PDTC4ZM E PDTC4ZT *8 PDTC4ZU *54 [] * = placeholder for manufacturing site code PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 2 of 7

PDTC4Z series 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 604). Symbol Parameter Conditions Min Max Unit V CBO collector-base voltage open emitter - 50 V V CEO collector-emitter voltage open base - 50 V V EBO emitter-base voltage open collector - 5 V V I input voltage positive - +0 V negative - 5 V I O output current - 0 ma I CM peak collector current single pulse; - 0 ma t p ms P tot total power dissipation T amb 25 C PDTC4ZE (SOT46) [][2] - 50 mw PDTC4ZM (SOT88) [2][] - 250 mw PDTC4ZT (SOT2) [] - 250 mw PDTC4ZU (SOT2) [] - 200 mw T j junction temperature - 50 C T amb ambient temperature 65 +50 C T stg storage temperature 65 +50 C [] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 of 7

PDTC4Z series 00 006aac778 P tot (mw) 200 () (2) () 0 0-75 -25 25 75 25 75 T amb ( C) () SOT2; FR4 PCB, standard footprint SOT88; FR4 PCB with 70 m copper strip line, standard footprint (2) SOT2; FR4 PCB, standard footprint () SOT46; FR4 PCB, standard footprint Fig. Power derating curves 6. Thermal characteristics Table 7. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-a) thermal resistance from junction to ambient in free air PDTC4ZE (SOT46) [][2] - - 80 K/W PDTC4ZM (SOT88) [2][] - - 500 K/W PDTC4ZT (SOT2) [] - - 500 K/W PDTC4ZU (SOT2) [] - - 625 K/W [] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 4 of 7

PDTC4Z series Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 006aac78 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig 2. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4ZE (SOT46); typical values 006aac782 Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig. FR4 PCB, 70 m copper strip line Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4ZM (SOT88); typical values PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 5 of 7

PDTC4Z series Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 006aac779 0. 0.02 0.05 0.0 0 - -5-4 - -2 2 t p (s) Fig 4. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4ZT (SOT2); typical values Zth(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 006aac780 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig 5. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4ZU (SOT2); typical values PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 6 of 7

PDTC4Z series 7. Characteristics Table 8. Characteristics T amb =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit I CBO collector-base cut-off V CB =50V; I E = 0 A - - 0 na current I CEO collector-emitter V CE =0V; I B =0A - - A cut-off current V CE =0V; I B =0A; - - 5 A T j = 50 C I EBO emitter-base cut-off V EB =5V; I C =0A - - 70 A current h FE DC current gain V CE =5V; I C = ma 0 - - V CEsat collector-emitter I C =5mA; I B =0.25mA - - 0 mv saturation voltage V I(off) off-state input voltage V CE =5V; I C =0 A - 0.6 0.5 V V I(on) on-state input voltage V CE = 0. V; I C =5mA. 0.9 - V R bias resistor (input). 4.7 6. k R2/R bias resistor ratio 8 2 C c collector capacitance V CB =V; I E =i e =0A; - - 2.5 pf f=mhz f T transition frequency V CE =5V; I C =ma; f = 0 MHz [] - 20 - MHz [] Characteristics of built-in transistor PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 7 of 7

PDTC4Z series 006aac89 006aac820 h FE 2 () (2) () V CEsat (V) - () (2) () Fig 6. - 2 I C (ma) V CE =5V () T amb = 0 C (2) T amb =25 C () T amb = 40 C DC current gain as a function of collector current; typical values Fig 7. -2-2 I C (ma) I C /I B =20 () T amb = 0 C (2) T amb =25 C () T amb = 40 C Collector-emitter saturation voltage as a function of collector current; typical values 006aac82 006aac822 V I(on) (V) V I(off) (V) () () (2) () (2) () Fig 8. - - 2 I C (ma) V CE =0.V () T amb = 40 C (2) T amb =25 C () T amb = 0 C On-state input voltage as a function of collector current; typical values Fig 9. - - I C (ma) V CE =5V () T amb = 40 C (2) T amb =25 C () T amb = 0 C Off-state input voltage as a function of collector current; typical values PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 8 of 7

PDTC4Z series 006aac82 006aac757 C c (pf) 2 f T (MHz) 2 0 0 20 0 40 50 V CB (V) - 2 I C (ma) f=mhz; T amb =25 C V CE =5V; T amb =25 C Fig. Collector capacitance as a function of collector-base voltage; typical values Fig. Transition frequency as a function of collector current; typical values of built-in transistor 8. Test information 8. Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 9 of 7

PDTC4Z series 9. Package outline.8.4 0.45 0.5 0.95 0.60 0.0 0.22 0.62 0.55 0.55 0.47 0.50 0.46.75.45 0.9 0.7 0.65.02 0.95 2 0.0 0.22 2 0.0 0.5 0.25 0. 04--04 0.20 0.2 0.5 0-04-0 Fig 2. Package outline PDTC4ZE (SOT46/SC-75) Fig. Package outline PDTC4ZM (SOT88/SC-).0 2.8. 0.9 2.2.8. 0.8 0.45 0.5 2.5 2..4.2 0.45 0.5 2.2 2.0.5.5 2 2.9 0.48 0.8 0.5 0.09. 0.4 0. 0.25 0. 04--04 04--04 Fig 4. Package outline PDTC4ZT (SOT2) Fig 5. Package outline PDTC4ZU (SOT2/SC-70). Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 2NC ordering code. [] Type number Package Description Packing quantity 000 5000 000 PDTC4ZE SOT46 4 mm pitch, 8 mm tape and reel -5 - -5 PDTC4ZM SOT88 2 mm pitch, 8 mm tape and reel - - -5 PDTC4ZT SOT2 4 mm pitch, 8 mm tape and reel -25 - -25 PDTC4ZU SOT2 4 mm pitch, 8 mm tape and reel -5 - -5 [] For further information and the availability of packing methods, see Section 4. PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 of 7

PDTC4Z series. Soldering 2.2.7 solder lands 0.85 0.5 ( ) 2 solder resist solder paste occupied area 0.6 ( ). sot46_fr Reflow soldering is the only recommended soldering method. Fig 6. Reflow soldering footprint PDTC4ZE (SOT46/SC-75). 0.7 R0.05 (2 ) solder lands 0.9 0.6 0.7 solder resist 0.25 (2 ) solder paste occupied area 0. (2 ) 0.4 (2 ) 0. 0.4 sot88_fr Reflow soldering is the only recommended soldering method. Fig 7. Reflow soldering footprint PDTC4ZM (SOT88/SC-) PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 of 7

PDTC4Z series. 2.9.9 solder lands.7 2 solder resist solder paste 0.7 ( ) 0.6 ( ) occupied area 0.5 ( ) 0.6 ( ) sot02_fr Fig 8. Reflow soldering footprint PDTC4ZT (SOT2).2 (2 ) 2.2.4 (2 ) solder lands 4.6 2.6 solder resist occupied area.4 preferred transport direction during soldering 2.8 4.5 sot02_fw Fig 9. Wave soldering footprint PDTC4ZT (SOT2) PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 2 of 7

PDTC4Z series 2.65.85.25 solder lands 2 solder resist 2.5 0.6 ( ). solder paste 0.5 ( ) occupied area 0.55 ( ) sot2_fr Fig 20. Reflow soldering footprint PDTC4ZU (SOT2/SC-70).425 ( ) 4.6 2.575 solder lands solder resist occupied area.65 2..8 09 (2 ) preferred transport direction during soldering sot2_fw Fig 2. Wave soldering footprint PDTC4ZU (SOT2/SC-70) PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 of 7

PDTC4Z series 2. Revision history Table. Revision history Document ID Release date Data sheet status Change notice Supersedes PDTC4Z_SER v.8 20205 Product data sheet - PDTC4Z_SERIES v.7 Modifications: The format of this document has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. Type numbers PDTC4ZEF, PDTC4ZK and PDTC4ZS removed. Section Product profile : updated Section Ordering information : added Section 4 Marking : updated Figure to : added Table 6 Limiting values : updated Section 6 Thermal characteristics : updated Table 8 Characteristics : V i(on) redefined to V I(on) on-state input voltage, V i(off) redefined to V I(off) off-state input voltage, I CEO updated, f T added Section 8 Test information : added Section 9 Package outline : superseded by minimized package outline drawings Section Packing information : added Section Soldering : added Section Legal information : updated PDTC4Z_SERIES v.7 2004086 Product data sheet - PDTC4Z_SERIES v.6 PDTC4Z_SERIES v.6 20040406 Product specification - PDTC4Z_SERIES v.5 PDTC4Z_SERIES v.5 20009 Product specification - PDTC4Z_SERIES v.4 PDTC4Z_SERIES v.4 200044 Product specification - - PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 4 of 7

PDTC4Z series. Legal information. Data sheet status Document status [][2] Product status [] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com..2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.. Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). NXP does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 604) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 5 of 7

PDTC4Z series Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding..4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 4. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PDTC4Z_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 8 5 December 20 6 of 7

PDTC4Z series 5. Contents Product profile........................... General description......................2 Features and benefits..................... Applications............................4 Quick reference data.................... 2 Pinning information...................... 2 Ordering information..................... 2 4 Marking................................ 2 5 Limiting values.......................... 6 Thermal characteristics.................. 4 7 Characteristics.......................... 7 8 Test information......................... 9 8. Quality information...................... 9 9 Package outline........................ Packing information.................... Soldering............................. 2 Revision history........................ 4 Legal information....................... 5. Data sheet status...................... 5.2 Definitions............................ 5. Disclaimers........................... 5.4 Trademarks........................... 6 4 Contact information..................... 6 5 Contents.............................. 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information. NXP B.V. 20. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 5 December 20 Document identifier: PDTC4Z_SER

2024 © technodocbox.com Privacy Policy | Terms of Service | Feedback