Product: Name and address of the manufacturer: Rockwell utomation Inc. 101 South nd Street Milwaukee, WI 504 U.S.. EU Declaration of Conformity IEC Contactors, Safety Contactors, Reversing Contactors, Safety Reversing Contactors and ccessories Name and address of the authorised representative: Rockwell utomation.v. Rivium Promenade 160 909 LM Capelle aan den Ijssel The Netherlands This declaration of conformity is issued under the sole responsibility of the manufacturer. Object of the declaration: llen-radley 100-C, 100S-C, 100Q-C, 104-C, 104S-C Series and ccessories (reference the attached list of catalogue numbers) The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: 014/5/EU Low Voltage Directive (LVD) 014/0/EU EMC Directive (EMC) 011/65/EU RoHS Directive (RoHS) References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: EN 60947-4-1:010+1:01 Low-voltage switchgear and controlgear Part 4-1: Contactors and motorstarters Electromechanical contactors and motor-starters EN 60947-5-1:004+1:009 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices EN 60947-5-4:00 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low energy contacts Special tests EN 50581:01 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances Signed for and on behalf of the above named manufacturer: Place and date of issue: arau, Switzerland 08-May-017 Name, function: Signature: Daniel aumann, Manager Product Certification Engineering Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 1 / 9
Catalogue number Series 1 Description Directive EMC LVD RoHS N/R Yes Yes 100 C IEC Contactors with conventional coil per Nomenclature 100 C E IEC Contactors with electronically-controlled DC coil Yes Yes Yes per Nomenclature 100 C Q IEC Contactors with electronically-controlled DC coil Yes Yes Yes per Nomenclature 104 C IEC Reversing Contactors with conventional coil per N/R Yes Yes Nomenclature 104 C E IEC Contactors with electronically-controlled DC coil Yes Yes Yes per Nomenclature 104 C Q IEC Contactors with electronically-controlled DC coil Yes Yes Yes per Nomenclature ccessories 100 F Front Mounted uxiliary Contact locks per N/R Yes Yes Nomenclature 100 S Side Mounted uxiliary Contact locks per N/R Yes Yes Nomenclature 100 FPT Pneumatic Timing Modules per Nomenclature N/R N/R Yes 100 ET Electronic Timing Modules per Nomenclature Yes Yes Yes 100 CSF47 Rectifier Modules per Nomenclature N/R Yes Yes 100 MC Mechanical Interlocks per Nomenclature N/R Yes Yes 100 FL Mechanical Latches per Nomenclature N/R Yes Yes 100 FS Suppressor Modules per Nomenclature N/R Yes Yes 100 JE Electronic DC Interfaces per Nomenclature Yes Yes Yes 105 PW 105 PW7 105 PW55 105 PW85 105 PW97 170 PW 170 PW7 170 PW55 170 PW7 170 PW85 170 PW97 Reversing Power Wiring Kits N/R N/R Yes Wye-Delta/Star-Delta Starter Wiring Kits N/R N/R Yes 100 CT Terminal Lug Kits per Nomenclature N/R Yes Yes 100 CP Paralleling Links per Nomenclature N/R Yes Yes 100 CN1 100 CN 100 CN 100 CN4 100 CN5 Mounting daptor Plate N/R N/R Yes 100 SCC Yes Protective Covers N/R N/R 100 SCF 100 S0 Yes Dovetail Connectors N/R N/R 100 S9 100 FMS 100 FMP 100 FMC 100 FM1 100 FM Marking Systems N/R N/R Yes 1) If no series number is given, then all series are covered. ) Yes = Product is certified to this directive. N/R = This directive is not required for this product. Document Control Number: PCC-067-K-EN (100-CT015-EN-E) / 9
MODEL NOMENCLTURE: IEC Contactors, Safety Contactors, Reversing Contactors, Safety Reversing Contactors Catalogue Number Explanation 100 C 100S C 100Q C 104 C 104S C 1 4 5 6 7 8 9 1 100 C 100S C 100Q C 104 C 104S C R 09, 1, 16, 0, 7, 40 4, 55 60, 7, 85, 90, 97 4 S 5 ase Catalogue Number IEC Contactor (-poles and 4-poles) IEC Safety Contactor (-poles and 4-poles) IEC Capacitor Switching Contactor (-poles, contactor sizes 16 and 7) IEC Reversing Contactor (-poles) IEC Safety Reversing Contactor (-poles) Terminal Type Screw terminals Spring force terminals Contactor Size Function or Layout Nothing specified Coil with three field wiring terminals (for Contactor sizes 9, 1, 16,, 0, 7) Coil Terminals Position Line side coil terminals Load side coil terminals (bottom) U 6 One, two or three letters Control Voltage Coil Code (indicates coil-voltage and -frequency) C coil code (conventional C coil: 1 550V50Hz) C coil code (conventional C coil: 1 600V60Hz) C coil code (conventional C coil: 4 415V50/60Hz, double frequency) DC coil code (conventional DC coil: 9 50VDC). Two letter code starting with Z or D ; D indicates integrated bi-directional diode between coil terminals DC coil code (electronically-controlled DC coil: 1 50VDC). Two letter code starting with E (contactor sizes 09, 1, 16,, 0, 7, 40, 4, 55) DC coil code (electronically-controlled DC coil with reduced drop-out time: 1 50VDC). Two letter code starting with Q (contactor sizes 09, 1, 16,, 0, 7, 40, 4, 55) DC coil code (Double Winding Coil: 9 110VDC). Two letter code starting with Y Document Control Number: PCC-067-K-EN (100-CT015-EN-E) / 9
IEC Contactors, Safety Contactors, Reversing Contactors, Safety Reversing Contactors Catalogue Number Explanation (continued) 7 00, 01, 10 00, 00, 400 0, 0, 04, 05, 11, 1, 1, 14, 1,,, 1,, 41, 04,, 0, 04, 11, 1,, 1, 40, 404, 405, 411, 41, 414, 4, 4, 41, 4 of Contactors (-poles) of Contactors (4-poles) of Safety Contactors 11, 0 of Capacitor Switching Contactors 0, of Reversing Contactors 008, 010, 01, 10 of Safety Reversing Contactors D00, D01, D0, D10, D11, D0, E00, E01, E10, D00G, D01G, D0G, D10G, D11G, D0G, E00G, E01G, E10G, 00-D00, 00-D00, 400-D00, 00-D01, 00-D01, 400-D01, 00-D10, 00-D10, 400-D10, 00-D00G, 00-D00G, 400-D00G, 00-D01G, 00-D01G, 400-D01G, 00-D10G, 00-D10G, 400-D10G D04, D06, D, D4, D4, E04, E 8 C 9 C -X -X -15-16 -X6 of Contactors with Double Winding Coil (prefix Y ) Prefix D is for contactors of sizes 09, 1, 16, Prefix E is for contactors of sizes 0, 7, 4, 55 Suffix G indicates that the coil switch-over contact is mounted to the left side of contactor; no suffix at this position indicates that the coil switch-over contact is mounted to the right side of contactor of Reversing Contactors with Double Winding Coil (prefix Y ) Prefix D is for reversing contactors of sizes 09, 1, 16, Prefix E is for reversing contactors of sizes 0, 7, 4, 55 uxiliary Contact locks on Safety (Reversing) Contactors with standard moveable contacts uxiliary Contact locks on Safety (Reversing) Contactors with bifurcated moveable contacts Options (may be combined with - ) No option Control wiring provided (Reversing Contactors only) Terminal Covers not provided Spade connectors provided (Contactors only) Spade connectors provided (Contactors only) Spade connectors provided (Reversing Contactors only) Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 4 / 9
ccessories Catalogue Number Explanation.) Front Mounted uxiliary Contact locks 1 ase Catalogue Number 100 F 100 CRF 100S F 100S CRF Front Mounted uxiliary Contact lock with screw terminals Front Mounted uxiliary Contact lock with spring force terminals Front Mounted Safety uxiliary Contact lock with screw terminals Front Mounted Safety uxiliary Contact lock with spring force terminals Terminal Identification Starting with digit 5 (preferably for use with 700(S) CF Contactor relays) Starting with digit 1 (preferably for use with 100(S) C Contactors and 104(S) C Reversing Contactors) C Starting with digit (preferably for use with 100 C Contactors and 104 C Reversing Contactors) uxiliary Contact lock with standard moveable contacts 4 5 100 F 100 CRF 100S F 100S CRF 1 4 5 L LL Two digits uxiliary Contact lock with bifurcated moveable contacts Standard contacts One early make N.O. contact and one late brake N.C. contact Two early make N.O. contacts and two late brake N.C. contacts First digit indicates number of N.O. contacts Second digit indicates number of N.C. contacts Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 5 / 9
ccessories Catalogue Number Explanation (continued).) Side Mounted uxiliary Contact locks 100 S 1 4 1 100 S ase Catalogue Number of Side Mounted uxiliary Contact lock Terminal Identification D Starting with a blank space which is filled out according to customer s need (preferably for use with 700 CF Contactor Relays) Starting with digit 1, except 100 S01 which is starting with digit (preferably for use with Contactors of size 40, 4, 55, 60, 7, 85, 90) Starting with digit (preferably for use with Contactors of size 09, 1, 16,, 0, 7) L Standard contacts One early make N.O. contact and one late brake N.C. contact 4 Two digits First digit indicates number of N.O. contacts Second digit indicates number of N.C. contacts C.) Pneumatic Timing Modules 100 FPT 1 1 100 FPT ase Catalogue Number of Pneumatic Timing Module Delay Type On-delay Off-delay 0 180 Time Range 0. 0s 1.8 180s Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 6 / 9
ccessories Catalogue Number Explanation (continued) D.) Electronic Timing Modules 100 ET 1 4 1 100 ET ase Catalogue Number of Electronic Timing Module Delay Type Y On-delay Off-delay Control for star-delta starting 4 KJ ZJ 0 180 Operation Voltage 110 40V50/60Hz and 110 50VDC (for 100 ET) 110 40V50/60Hz (for 100 ET and 100 ETY) 4V50/60Hz (for 100 ET) 4 48VDC (for 100 ET) Time Range 0.1 s (for 100 ET) 0. s (for 100 ET) 1 0s 10 180s E.) Rectifier Modules 100 CSF47 1 1 100 CSF47 ase Catalogue Number of Rectifier Module 0 4 50V50/60Hz input voltage; no timing module provided 110 50V50/60Hz input voltage; timing module with 1 s on-delay provided F.) Mechanical Interlocks 100 MC 1 1 100 MC ase Catalogue Number of Mechanical Interlock Terminal Designation C 1-, 1- or none (no contacts provided) 55-56, 65-66 1-, 1-00 0 No contacts provided Two N.C. contacts provided Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 7 / 9
G.) Mechanical Latches ccessories Catalogue Number Explanation (continued) 100 FL 11 1 1 100 FL ase Catalogue Number of Mechanical Latch 11 One N.C. and one N.O. contact Control Voltage Coil Code (indicates coil-voltage and -frequency) One or two letters C coil code (conventional C coil: 4 440V50Hz) C coil code (conventional C coil: 4 480V60Hz) H.) Suppressor Modules 100 FS 100 CRFS 1 4 1 100 FS 100 CRFS Module Type C D V RC-Module Diode-Module Varistor-Module Two or three digits Indicates voltage range 4 W ase Catalogue Number Suppressor Module for use with Contactors with screw terminals Suppressor Module for use with Contactors with spring force terminals Indicates that Suppressor Module is provided with connectors which fit to the coil terminal of the contactors Indicates that Suppressor Module is provided with wire leads for connection to the coil terminal of the contactors I.) Electronic DC Interfaces 100 JE 1 1 100 JE ase Catalogue Number of Electronic DC Interface 1 4KN 48 Input voltage 4VDC; output voltage 110 40V50/60Hz Input voltage 6 1VDC; output voltage 110 40V50/60Hz Input voltage 4VDC; output voltage 110 400V50/60Hz Input voltage 5 48VDC; output voltage 110 40V50/60Hz Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 8 / 9
J.) Terminal Lug Kits ccessories Catalogue Number Explanation (continued) 100 CT 1 1 100 CT ase Catalogue Number of Terminal Lug Kit Connection Side N L Line or load side Line side (only for 100 CTN) Load side (only for 100 CTL) 7 4 85 Max. C-1 Current 45 60 90 10 K.) Paralleling Links 100 CP 1 1 100 CP ase Catalogue Number of Paralleling Link Max. C-1 Current 7 100 150 Document Control Number: PCC-067-K-EN (100-CT015-EN-E) 9 / 9