TACC Parts List Description

Similar documents
Removal and Installation8

COPYRIGHT 2009 AMI ENTERTAINMENT NETWORK, INC.

Ryobi 12 in. Sliding Compound Miter Saw With Laser Model No. TSS120L Repair Sheet

TDM To MiniMech conversion ProceDure

93T Classic Treadmill - 4HP AC - Heart Rate 93T

CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS

Validator Update Instructions for Rowe BC1200 $1 - $20

Instructions to Install Retrofit Kit 6/7000 Machine

Repair Parts List MICRO/WALLOVEN MODEL NUMBER WM2720W. When requesting service or ordering parts, always provide the following information:

TABLE OF CONTENTS FINAL ASSEMBLY... 1 DOOR ASSEMBLY... 3 CABINET ASSEMBLY... 7 DELIVERY BOX ASSEMBLY... 9 LIGHT ASSEMBLY... 12

AIR CUSHION TECHNOLOGY

Electronics. Plate 1.1 MPD -1 Computer Display Module Three-Grade, Four-Grade, and Fixed Blender F F

To Purchase This Item, Visit BMI Gaming (800)

RS3000 SERIES BILL ACCEPTORS

Megatouch FORCE Monitor Chassis Board Replacement

Updated 10/24/16 DAW

Removal and Installation 8

HP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

Installation Guide. Retrofit Kit for USB Ready Intraoral Systems

Parts Manual Kleen Sweep 28 - Model Battery

Thetford Corp. Refrigerator Replacement Parts List

REMOVE COVERS. 1. Remove three screws from the Side Panel (L). 2. Slide the Side Panel (L) backward, and raise it to remove from the printer.

SERVICE PARTS MANUAL

To be used for reference only Property of Arc Machines, Inc.

SERVICE PARTS MANUAL

E2460GS Oscilloscope Upgrade Kit

WEASEL N/B MAINTENANCE

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.

3400 Printer Assembly, Parts Breakdown Page Mechanics

SERVICE PARTS MANUAL

To Purchase This Item, Visit BMI Gaming (800) ACORN DROP ACORN DROP

Cutter Option Installation Instructions

CATALOG OF REPLACEMENT PARTS

ADF/scanner assembly. HP LaserJet M3027_M Figure 7-1 ADF/scanner assembly

CODE 50108, 50110, 50164, 50165

PARTS LIST WPT150 Electronic Typewriter

Instructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only)

INSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS

PARTS DESCRIPTION LISTING

Spare Parts Catalog. P/N Edition 1 November EasyCoder C4 Bar Code Label Printer

CHAPTER 20 PARTS. This chapter describes assemblies, subassemblies, and parts considered replaceable at on site field installations.

SERVICE MANUAL MODEL SSW-521-D2-ADA

Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:

Landmark Upgrade Kit Installation Instructions

INSTALLATION MANUAL KIOSK SX6 SF6

Parts Manual Kleen Sweep 32R Rider Sweeper

Troubleshooting CHAPTER

Section. Service & Maintenance. - Core & Hard Disk Drive (HDD) - Amplifier - Monitor - UPS - Dollar Bill Acceptor - Fan Filter G - 1

Floor Standing Pedestal

Table of Contents. Unpacking and Inspection Setup Loading the Media Mount the Printer on the Wall... 16

Service & Maintenance

ColorMaxLP Label Roll Rewinder

Coin Acceptors, Inc. Installation Instructions for the 4.3 Touch Screen Display

Phase Loss Protection Upgrade. Phase Loss Protection Upgrade. In this bulletin:

WS/HR Series PARTS MANUAL

6 Removal and replacement

*UB701058* PARTS BOOK FC-20A. Fore-Edge Trimmer. Vol.1 UB (000) /FC20A/11/SM

Nov. 07, 2013 p. 5 - changed the B axis unit value to from Changed by Randy per Frank s request.

Feed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002

Parts List. Chapter. In this chapter...

TROUBLESHOOTING CHAPTER

INSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS

www MK-Electronic de FRU Parts List Introduction Organization of this Section

* See following pages for Assembly Breakdowns HMD914 Magnet Base Drill (120v Standard Base) HMD914 Magnet Base Drill

Recommended Spare Parts Manual. 1. Overall Configuration

Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays

Parts / Spares Reference Sheet

Dishmachine Division Please call for pricing or

SPARE PARTS TOWERLINE. Type: 700 / 500A. HARTING Systems GmbH & Co.KG Max-Planck-Straße 1 D Espelkamp

Revision History E F G H J K Revision Description: K > Allegion Rebranding.

Installing 6 Indexer: PRS Standard Tools

AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:

RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20

The Eye Com 7000 Dual Page Reader Operating and Maintenance Instructions

PARTS LIST N3104 N3150 N3141

Z-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly

EZ-9000 Tape Dispenser, EZ-9000-RP Tape Dispenser Part Number / MAY 2012 REV 1.0

Spare Parts Catalog. EasyCoder PC4/PC41 Bar Code Label Printers

Assembly Manual for Mobile X-ray

Peel/Rewind Upgrade Kit

xtablet T1600 Vehicle Holder Installation Guide

9600 PCI EPP Keypad and

Replacing the Encoder Strip

INSTALLATION & PROGRAMMING INSTRUCTIONS

580 RS, 580 RSE, 580 RSW, 600 C. Part s Manual A 3/00 Printed in USA

Shuttle Oven Models: S1200, S2000, S2000NC

MacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Installation

EX2000 Series Vending System. User s Manual. Choose ACDI for all your document vending needs User s Manual

A TCP/IP network CAT 5 cable If the network is faster than 10baseT a switching hub will be needed Static IP address

EX2000 Series Vending System. User s Manual. Choose ACDI for all your document vending needs User s Manual

Print Mechanism Maintenance Kit

Basketball Shot Clock Set LX2180 Manual

8 Parts and diagrams. www MK-Electronic de

VBAR 270. User Manual. Version 1.2

Repair Parts List DRYER MODEL NUMBER DE712. When requesting service or ordering parts, always provide the following information:

TB Touchscreen software update Revision 1.5, with upgraded PCB Revision 2.2 (P/N K) Topic: JET6, OVERVIEW UPDATE

Instructions for installing your QuiltCam on your Gammill quilt machine.

Fuser Assembly Removal

CHAPTER 5 UNIT MAINTENANCE INSTRUCTIONS

Transcription:

644-0037-003S AC ADAPTER, THERMAL PRINTER 83.49 FOR CII & IV WITH THERMAL PRINTER ONLY. Does not include power cord. 00050103S ANCHOR KIT 25.71 Includes 4 anchors, bolts and washers. Requires 5/8" masonry bit. 00022101S BACKPLATE, MAGAZINE 26.27 Mounts on bottom/backside of magazine. Motors and sensors mount to this part. 201-2225-001S BEZEL, CONTROL PANEL 24.84 FOR IIA, AC, CII & IV. Control Panel touchpad border. 644-0071-110S BILL VALIDATOR, (CASHCODE), USA 595.88 For TACC-IV with CashCode Bill Acceptors only. Rear load. Does not include cassette. R644-0071-110 BILL VALIDATOR, (CASHCODE), USA, RECONDITIONED 414.44 Rear load. Does not include cassette. R644-0035-001 BILL VALIDATOR, MEI, LOCKING, (Model 3900), 569.27 RECONDITIONED Does not include cassette. If replacing a model 3800 (cassette does not lock to bill validator frame) Bill Validator, the cassette must also be replaced. Cassettes are not interchangeable between 3800 and 3900 model Bill Validators. $300.00 core value if the part is received in rebuildable condition. R644-0035-004 BILL VALIDATOR, MEI, NON-LOCKING, (Model 3800), 500.00 RECONDITIONED. Does not include cassette. Reconditioned. Cassette does not lock to bill validator frame. $300.00 core value if the part is received in rebuildable condition. 201-4453-001S BRACKET, DOOR SWITCH 31.36 Mounts against front of cabinet, inside, right of door. Door switch and battery switch mount to this. 502-1010-001S BUMPER KIT, DROP CHUTE (QTY =10) 25.29 Drop chute rests on these in the down position. Page 1 of 15

201-2769-001S CABLE, COMMUNICATION 74.58 FOR SERIAL #'S C92, C93 & IC. Power Supply chassis to external device. Also requires 201-2736-001S (internal). NOT FOR PRINTER COMMUNICATION. 201-2736-001S CABLE, COMMUNICATION 63.60 FOR SERIAL #'S C92, C93 & IC. Power Supply chassis to Main PCB. Requires 201-2769-001S (external). NOT FOR PRINTER COMMUNICATION. 201-4564-001S CABLE, FUSE CABLE CONNECTION - BILL VALIDATOR (POWER) 48.53 Supplies AC power to the Mars 3000 Series Bill Validator. 201-5875-001S CABLE, MAIN PCB - BILL VALIDATOR (CASHCODE) 40.65 Communication cable. From Main PCB to Bill Validator. 201-5876-001S CABLE, MAIN PCB - BILL VALIDATOR (CASHCODE) 50.16 Power cable. 201-4565-001S CABLE, MAIN PCB - BILL VALIDATOR COMM PCB (MARS) 53.89 Communication cable. 201-4574-001S CABLE, MAIN PCB - BILL VALIDATOR DOOR LOCK 54.96 201-2723-001S CABLE, MAIN PCB - CONTROL PANEL 58.47 FOR AC, CII & IV. Communication cable. 6 conductor cable with a 6 pin connector. 201-2722-001S CABLE, MAIN PCB - CONTROL PANEL 53.00 FOR AC, CII & IV. Power cable. 201-3109-001S CABLE, MAIN PCB - CONTROL PANEL 39.53 FOR IIA. Ribbon Cable. 201-4573-001S CABLE, MAIN PCB - DOOR BOLT SOLENOID 44.96 Page 2 of 15

201-2695-004S CABLE, MAIN PCB - KEYSWITCH/SOLENOID 24.31 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93 & IC. Main PCB to quick connect at keyswitch or solenoid. 201-4568-001S CABLE, MAIN PCB - POWER SUPPLY CHASSIS 51.42 FOR CII OR IV WITH THERMAL PRINTER ONLY Printer internal communication cable. 201-2726-001S CABLE, MAIN PCB - PRINTER PCB 59.60 FOR CII WITH IMPACT PRINTER ONLY. Communication cable. 201-2728-001S CABLE, MAIN PCB - PRINTER PCB 56.78 FOR CII WITH IMPACT PRINTER ONLY. 2 conductor cable. 201-2727-001S CABLE, MAIN PCB - PRINTER PCB 57.07 FOR CII UNITS WITH IMPACT PRINTERS. Power cable. 201-2698-003S CABLE, POWER SUPPLY - MAIN PCB 49.47 647-0012-007S CABLE, POWER SUPPLY CHASSIS - PRINTER 41.16 FOR CII OR IV WITH THERMAL PRINTER ONLY. Power Supply chassis to Printer. Communication cable. 644-0038-001S CALIBRATION KIT, BILL VALIDATOR (MARS 3000) 39.33 Includes jumper, 10 calibration sheets and instructions. 201-2548-001S CAM, DOOR BOLT LOCK 24.38 FOR IIA, AC & CII. Mounts on back of lock. Connects lock to door locking bar. May be required if replacing door bolt lock on serial # A91. 201-4454-001S CAM, DOOR BOLT LOCK 33.56 Mounts on back of lock. Connects lock to door locking bar. 201-2547-001S CAM, TUBE LOAD LOCK BAR 28.16 FOR IIA, AC & CII. Mounts on back of lock. Connects lock to lock bar angle. Page 3 of 15

201-3142-001S CAP KIT, VEND TUBE (QTY = 100) 34.24 FOR 201-3086-001S VEND TUBES. 00005410S CAP KIT, VEND TUBE (QTY = 100) 58.41 FOR 00015704S VEND TUBES. 201-2248-001S CARD KIT, MAGNETIC (QTY = 10) 29.84 FOR AC, CII & IV. Used for logging onto menu's. 201-5894-001S CARD READER 149.71 FOR AC, CII, & IV. Mounts on Printer/Card Reader box. This is a replacement Card Reader and may look different than the original Card Reader. Includes cable and mounting plate. 644-0071-205S CASSETTE, (CASHCODE), USA 248.51 1500 bill capacity. Door to access currency does not lock. R644-0071-205 CASSETTE, (CASHCODE), USA, RECONDITIONED 161.53 1500 bill capacity. Door to access currency does not lock. 644-0071-215S CASSETTE, WITH LOCK (CASHCODE), USA 275.26 1500 bill capacity. R644-0071-215 CASSETTE, WITH LOCK (CASHCODE), USA, RECONDITIONED 178.92 1500 bill capacity. R644-0035-002 CASSETTE, MARS, (MODEL 3900), LOCKING, RECONDITIONED 289.25 For model 3900 Bill Validators.Will not work on model 3800 Validator. 1200 bill capacity. Includes part # 502-1236-102S, lock assembly. Must turn knob to remove or secure to Bill Validator frame. Door for bill removal is lockable. Cassette can be returned to Tidel for repair (requires RMA). R644-0035-012 CASSETTE, MARS, (MODEL 3900), LOCKING, RECONDITIONED 289.25 For model 3900 Bill Validators.Will not work on model 3800 Validator. Locks on cassette doors are key-alike. 1200 bill capacity. Includes part # 502-1236-102S, lock assembly. Must turn knob to remove or secure to Bill Validator frame. Door for bill removal is lockable. Cassette can be returned to Tidel for repair (requires RMA). Page 4 of 15

R644-0035-005 CASSETTE, MARS, (MODEL 3800), RECONDITIONED 43.06 For model 3800 Bill Validators. Will not work on model 3900 Validator. Cassette can be returned to Tidel for repair (requires RMA). 644-0071-601S CASSETTE PROTECTIVE COVER (CASHCODE) 20.71 Yellow, plastic cover that protects the bottom of the cassette. 644-0107-005S CLEANING CARD KIT, CASHCODE BILL ACCEPTOR, QTY = 1 PKG OF 5 20.00 644-0107-100S CLEANING CARD KIT, CASHCODE BILL ACCEPTOR, QTY = 20 PKG OF 5 200.00 644-0107-500S CLEANING CARD KIT, CASHCODE BILL ACCEPTOR, QTY = 100 PKG OF 5 750.00 501-1012-015S CLIP KIT, TINNEMAN (QTY = 48) 26.53 Secures the Control Panel to the cabinet. Mounting screws screw into these. 201-2321-001S CONTROL PANEL 391.07 FOR AC ONLY. 201-2322-001S CONTROL PANEL 426.23 FOR CII ONLY. 201-2320-001S CONTROL PANEL 171.49 FOR UNITS WITH SERIAL #'S BEGINNING WITH A91, A92, A93 AND "IA" ONLY. 205-1204-001S CONTROL PANEL 182.09 FOR UNITS WITH SERIAL #'S BEGINNING WITH "SA" ONLY. 201-4609-001S CONTROL PANEL 452.04 00730060S COVER, LOWER SENSORS 23.85 Covers Lower Sensor PCB, sensors, motors and timing disks. 201-2306-001S CRADLE KIT, W/GEAR (QTY = 4) 40.27 FOR SERIAL #'S A92, A93, B92, B93, C92 & C93. Turns back and forth to dispense tubes from the magazine. 201-3079-001S CRADLE KIT, W/GEAR (QTY = 4) 33.02 FOR SERIAL #'S IA, IB, IC & IV. Turns back and forth to dispense tubes from the magazine. Page 5 of 15

201-2366-001S DECAL KIT, CONTROL PANEL (QTY = 2) 23.42 FOR IIA, AC, CII & IV. 1 cent to $20. Sticks onto the Control Panel vend buttons. 201-3506-001S DECAL KIT, WARNING, ENGLISH (QTY = 5) 30.95 Doubled sided. Has picture of a Tacc unit. "STORE PROTECTED BY TIME LOCK SAFE" Used on store & Tacc doors. 00087003S DIPSTICK KIT (QTY = 4) 23.82 NOT FOR USE ON SERIAL #'S BEGINNING WITH "I". Numbers go up to 11. 201-3060-001S DIPSTICK KIT (QTY = 4) 23.82 FOR SERIAL #'S BEGINNING WITH "I". Numbers go up to 10. 201-2382-001S DISPLAY (LCD) ASSEMBLY 117.62 FOR AC, CII & IV Attaches to the Control Panel PCB. 201-2385-001S DIVIDER, DROP SEPARATION 27.64 Divides bottom compartment into 2 sides. 201-4545-001S DIVIDER, DROP SEPARATION 26.36 FOR TACC UNITS SIZED FOR "ADA" COMPLIANT COUNTERS. Divides bottom compartment into 2 sides. 254-9000-008S DOOR, B-RATE DROP SAFE WITH BUILT-IN LOCK CORE HOUSING 79.91 Drop safes with serial's prior to SB-51052 were equipped with a silver lock core "housing" that is NO LONGER AVAILABLE.. If the lock core "housing is damaged, the door must be replaced this door. 644-0071-902S DOWNLOAD KIT, NEW CURRENCY SOFTWARE 32.59 For TACC-IV units equipped with CashCode Bill Validators. Includes memory stick and instructions. 201-1826-008S DROP CHUTE 96.64 FOR IIA, AC, CII & IV. With threaded rod for handle welded on. Available in black only. Page 6 of 15

201-1935-001S ENVELOPES (QTY = 500) 103.18 100 of each color. Manila envelope, open at top with diagonal cut. 201-3243-005S ENVELOPES, BLACK (QTY = 500) 97.64 Manila envelope, open at top with diagonal cut. 201-3243-001S ENVELOPES, BLUE (QTY = 500) 97.64 Manila envelope, open at top with diagonal cut. 201-3243-003S ENVELOPES, GREEN (QTY = 500) 97.64 Manila envelope, open at top with diagonal cut. 201-3243-004S ENVELOPES, RED (QTY = 500) 97.64 Manila envelope, open at top with diagonal cut. 201-3243-006S ENVELOPES, WHITE (QTY = 500) 97.64 Manila envelope, open at top with diagonal cut. 450-0105-123 EXPEDITION CHARGE 25.00 Will be applied to all rush orders, ie: overnight, 2nd day, 3rd day, or same day pick up. 201-2834-001S FILTER, AC POWER 43.00 Power cord plugs into this. 635-0019-001S FUSE HOLDER 23.11 Fuse for incoming AC power is housed in this. Includes cap. 201-2693-002S FUSE HOLDER W/CABLE 25.47 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC & IV. Fuse for incoming AC power is housed in this. Includes cap. 00068302S FUSE KIT, 1 AMP, SLO-BLO (QTY = 25) 29.47 For incoming AC power. 00021801S GEAR KIT, LARGE (QTY = 4) 24.82 Used on Cradles. 201-2696-001S GEAR KIT, MOTOR (QTY = 4) 23.69 Used on Vend Motors. 502-1025-001S HANDLE KIT, DROP CHUTE (QTY = 2) 25.36 FOR IIA, AC, CII & IV. Screws onto threaded rod of drop chute. Page 7 of 15

450-0105-149 KEY DECODING FEE 25.00 Charged when duplicate keys are made from an existing key sent to Tidel. 644-0071-603S KEY KIT, CASSETTE, CASHCODE BILL ACCEPTOR 89.79 10 keys per kit. 00088503S KEYS, MEDECO, REPLACEMENT 6.87 Minimum 2 keys per code. Verbal orders not accepted. Can be cut from an existing key but decoding fees will apply. Average 3 week delivery time. 00710229S KEYSWITCH, MEDECO, W/4KEYS 86.74 Keyed alike. Customer should furnish keycode. 00010501S KEYSWITCH, MEDECO, W/4KEYS 64.46 Momentary contact/spring loaded. 201-2498-001S KEYSWITCH, MEDECO, W/CABLE AND 4 KEYS 91.75 FOR IIA, AC & CII. Has small black quick connect. 201-2715-001S KEYSWITCH, MEDECO, W/CABLE AND 4 KEYS 72.67 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC & IV. Has red plastic, 2 pin quick connect. Requires 201-2695-004S cable to connect to Main PCB. 201-2715-002S KEYSWITCH, MEDECO, W/CABLE AND 4 KEYS 90.80 Keyed alike. Customer should furnish keycode. 201-2326-001S KEYSWITCH, VENDING, W/CABLE AND 2 KEYS 45.78 FOR IIA ONLY. Mounts on Control Panel. 00059301S KEYSWITCH, VENDING W/2KEYS 33.96 FOR IIA. 254-9000-007S LOCK CORE FOR B-RATED DROP SAFE 134.38 Does not include housing. If the housing requires replacement, the door must be replaced. Units prior to SB-51052 had a silver lock core housing that is no longer available. Units after SB-51052 have a lock housing that is integrated into the door. 502-1198-032S LOCK, COMBINATION, MECHANICAL 72.72 For B-Rated Safes Page 8 of 15

201-4710-006S LOCK, COMBINATION, ELECTRONIC 223.10 Includes Keypad and Boltwork. 502-1238-001S LOCK, BILL VALIDATOR VAULT DOOR, W/2KEYS 82.27 Electric. Includes Medeco Lock. 502-1045-001S LOCK, DOOR BOLT, MAIN VAULT, W/2 KEYS 41.75 FOR IIA, AC, CII & IV.. Operates bar which physically locks the door. If replacing lock on a unit with serial # A91, a cam (201-2548-001S) may be required. 502-1029-001S LOCK, TUBE LOAD LOCK BAR W/2 KEYS 28.90 FOR IIA, AC, CII & IV. Operates the tube load lock bar. 502-1236-102S LOCK, CASSETTE (MARS 3900) 36.58 FOR MARS 3900 BILL VALIDATORS. Used on part # 644-0035-002S cassette. 502-1236-101S LOCK, CASSETTE (MARS 3900) 36.58 FOR MARS 3900 BILL VALIDATORS. Used on part # 644-0035-002S cassette. Lock on Bill Validator door keyed alike. Customer should provide key code or locks will be keyed the same as all locks with this part #. 644-0071-602S LOCK, CASSETTE (CASHCODE) 41.63 Includes 2 keys. 201-2201-001S LOCK BAR ANGLE, TUBE LOAD 27.65 FOR IIA, AC & CII. Connects vend tube lock bar to cam on back of lock. 201-2515-001S LOCK BAR, DOOR 36.05 FOR IIA units with serial #'s below IA-24100 (approximately). FOR AC units with serial #'s below IB-00310 (approximately). FOR Cii units with serial #'s below IC-01910 (approximately). FOR IV units with serial #'s below IV-00305 (approximately). Slides back & forth to lock the door. Operated by the door bolt lock. 201-2515-002S LOCK BAR, DOOR 36.05 FOR IIA units with serial #'s above IA-24100 (approximately). FOR AC units with serial #'s above IB-00310 (approximately). FOR Cii units with serial #'s above IC-01910 (approximately). FOR IV units with serial #'s above IV-00305 (approximately). Slides back & forth to lock the door. Operated by the door bolt lock. Page 9 of 15

201-2200-001S LOCK BAR, TUBE LOAD 26.15 FOR IIA, AC & CII. Slides back and forth in front of the holes where tubes are loaded. 201-2715-003S LOCK SET, DOOR, KEYED ALIKE, W/2KEYS 109.40 FOR IIA, AC, CII & IV Includes door bolt lock and time delay keyswitch w/quick connect. 201-3066-002S MAGAZINE, MOTOVEND 88.35 FOR SERIAL #'S IA, IB, IC & IV. Tubes fall into this when loaded. Does not include backplate. 201-2370-001S MANUAL, OPERATOR 30.95 FOR AC ONLY. 201-3092-001S MANUAL, OPERATOR 36.05 FOR IC ONLY. 450-0157-001S MANUAL, OPERATOR 41.89 FOR IV ONLY 450-0299-001S MANUAL, OPERATOR, QUICK REFERENCE 23.04 FOR IIA ONLY. 450-0316-001S MANUAL, OPERATOR, QUICK REFERENCE 24.16 FOR AC ONLY. 450-0155-001S MANUAL, OPERATOR, QUICK REFERENCE 27.10 FOR CII ONLY. 450-0156-001S MANUAL, OPERATOR, QUICK REFERENCE 41.89 450-0330-001S MANUAL, SERVICE 53.22 COVERS IIA, AC & CII. 201-2697-001S MOTOR, VEND W/ GEAR 105.51 DC motor, drives cradle back and forth to dispense tubes. 502-1203-004S NIPPLE, GAS SHOCK, BILL VALIDATOR DOOR 21.87 644-0037-005S PAPER, THERMAL (25 ROLLS PER 1/2 CASE) 87.33 FOR THERMAL PRINTER. 644-0037-105S PAPER, THERMAL (50 ROLLS PER CASE) 151.77 FOR THERMAL PRINTER. Page 10 of 15

644-0037-002S PAPER HOLDER, THERMAL PRINTER 40.95 644-0035-003S PCB, COMMUNICATION, BILL VALIDATOR 87.16 Communication cable coming from Main PCB connects to this. 201-2230-001S PCB, CONTROL PANEL 128.78 FOR AC, CII & IV. Does not include LCD or LCD PCB. 201-2407-001S PCB, CONTROL PANEL W/ LCD 289.33 FOR AC, CII & IV. 201-5830-002S PCB, TACC 158.51 FOR SERIAL #'S A92, A93, IA and SA. R201-5830-002 PCB, TACC, RECONDITIONED 103.03 FOR SERIAL #'S A92, A93, IA and SA. 201-2724-001S PCB, TACC 1,369.56 FOR SERIAL #'S B92, B93 & IB. $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. R201-2724-001 PCB, TACC, RECONDITIONED 1,240.21 FOR SERIAL #'S B92, B93 & IB. $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. 201-3088-001S PCB, TACC 1,345.53 FOR SERIAL # C92, C93, & IC ONLY. Does not support auto load. $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. R201-3088-001 PCB, TACC, RECONDITIONED 1,249.50 FOR SERIAL # C92, C93, IC & IW ONLY. Does not support auto load. $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. Page 11 of 15

201-4666-001S PCB, TACC 1,341.62 $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. R201-4666-001 PCB, TACC, RECONDITIONED 1,245.50 $1000.00 core value if the part is received in rebuildable condition. Core credit requires previous purchase of part at current Dealer price. 201-2503-001S PIVOT PIN 22.98 FOR IIA, AC & CII Drop chute pivots on these. Requires welding to install. 201-2506-001S PLATE KIT, KEYSWITCH, COURIER (QTY = 3) 27.54 Mounts between keyswitch and door/cabinet. For instant access keyswitches. 201-2507-001S PLATE KIT, KEYSWITCH, ON/OFF (QTY = 6) 24.67 Mounts between keyswitch and door/cabinet. For vending and time delay keyswitches. 201-2505-001S PLATE KIT, LOCK, DOOR BOLT (QTY = 4) 22.78 FOR IIA, AC, CII & IV. Mounts between lock and door. 643-0007-001S POWER CORD, EXTERNAL 25.16 From unit to wall socket. 644-0037-004S POWER CORD, THERMAL PRINTER 30.60 FOR THERMAL PRINTER ONLY. From wall socket to AC adapter. 201-2686-001S POWER SUPPLY 161.47 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93 & IC. Mounts inside top/rear of cabinet. 201-4592-001S POWER SUPPLY 185.16 FOR IV & IW ONLY. 644-0003-001S PRINTER, IMPACT 255.10 FOR SERIAL #'S C92, C93 & IC. Page 12 of 15

201-4698-001S PRINTER ASSY, THERMAL 543.60 FOR IV & Cii ONLY. Includes paper holder, power cord, AC adapter, external communication cable and 2 rolls of paper. 644-0037-001S PRINTER, THERMAL 413.62 FOR IV & Cii ONLY. Printer only. Does not include paper holder, power cord or AC adapter. 501-1023-002S RETAINING RING KIT, CONTROL PANEL (QTY = 20) 27.05 Secures Control Panel bezel to frame. 301-0685-001S RIBBON KIT, PRINTER (QTY = 3) 37.45 FOR CII. Epson ERC-09. 201-2120-001S ROD, DROP CHUTE HANDLE 21.65 FOR IIA, AC, CII & IV. Handle screws onto this. Must be welded to drop chute. 301-0599-001S ROLLER, PRINTER PAPER 29.02 FOR CII ONLY. Paper roll rotates on this. 211-0070-048S SENSOR, DOOR 33.07 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, & IC. Door locking bar activates this when in the locked position. Includes cable. 211-0080-048S SENSOR, DOOR 42.39 FOR SERIAL #'s SA, IV & IW ONLY. Includes cable to Main PCB. 201-2700-001S SENSOR KIT, VEND (QTY = 2) 30.78 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC & IV. Mounts on magazine backplate. Infrared, timing disk rotates through this. 2 per motor/cradle. 502-1203-006S SHOCK, GAS ASSIST 36.04 Prevents Bill Validator door from falling open freely. 201-2714-001S SOLENOID, DOOR 68.45 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC, IV and SA Has red plastic quick connect. Page 13 of 15

502-1007-039S STANDOFF KIT, MOTOR COVER (QTY = 20) 25.71 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC & IV. Motor/sensor/lower assembly cover secures to these. 642-0008-002S SURGE PROTECTOR 57.40 For noisy power lines. 00049904S SWITCH, BATTERY 34.62 FOR AC & CII. Turns battery backup on and off. 201-2501-003S SWITCH, BATTERY ASSEMBLY 40.91 Includes cable to Main PCB. 635-0025-001S SWITCH KIT, CRADLE (QTY = 8) 52.40 FOR CII & IV. Detects tubes dispensed from magazine. 201-2730-003S SWITCH ASSY, CRADLE LIMIT 98.29 FOR CII & IV. Includes cables and 8 switches, assembled. 00006000S SWITCH KIT, DOOR (QTY = 3) 33.67 Mounts by door hinge. 301-0571-001S SWITCH, PAPER FEED 36.37 FOR CII ONLY. Mounts on Printer/Card Reader housing. Includes cable. 201-2592-001S TIMING DISK KIT (QTY=4) 22.45 FOR SERIAL #'S A92, A93, IA, B92, B93, IB, C92, C93, IC & IV. Mounts onto end of cradle. Travels between sensors to indicate cradle position. 201-2246-001S TOUCH PAD 144.27 FOR AC, CII & IV. Vinyl, has windows for display, wait, ready, timer, stacker full and scroll lights. Has ten-key keypad, menu, done & scroll keys. 201-2272-001S TOUCH PAD KIT 95.51 FOR IIA ONLY. Vinyl, with vend, door and alt vend keys. Includes bezel and retaining rings. Page 14 of 15

201-3086-001S TUBES, VEND (QTY = 100) 51.24 FOR SERIAL #'S THAT BEGIN WITH "I" OR "S". Currency is placed in this prior to loading in the magazine. 00015704S TUBES, VEND (QTY = 100) 88.69 FOR ALL TACC UNITS EXCEPT SERIAL #' S BEGINNING WITH "I". Currency is placed in this prior to loading in the magazine. Page 15 of 15