Features and Benefits Seamless source of dot-free illumination Epistar SMD Light Source Over 16 Million Color Possibilities Flat Surface 160 Beam Angle Bending Diameter of 120 millimeters/ 4.72 inches Contains no lead, mercury or glass Rated for Wet Environments Durable and Impact Resistant Interfaces With All Automation & Control Systems RGB 160 Vivid RGB delivers remarkably fluid color transitions by utilizing advanced DMX and LED dimming technology. Using our exclusive Triple-Extrusion technology, Vivid RGB brings you discernibly richer, truer color. Visibly uniform and flicker free, Vivid RGB transitions like no other even in high frame-rate environments. Seen by millions at the 2014 Grammy Awards. E347880 For more information please contact toll free: 1.888.580.NEON (6366) email: sales@ledneonflex.com
Technical Specifications Dimensions 11.5 21mm /.45.83in Output RGB All Single Color RGBW (2700K/4000K) W+WW (2500~5000K) LED Light Running Length SMD, RGB Light Chip Single feed: 10 meters / 32.81 feet Double feed: 20 meters / 65.62 feet Light Surface Square profile 160 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 50,000 Hours L70 @ 50 : 70,000 Hours L50 @ 50 C Chromaticity Ordinates x: 0.4715 y: 0.4276 u: 0.2624 v: 0.5354 Color Bin Tolerances +/- 3 % Efficacy (lm/w) 19.88 CRI 88 Electrical Input Voltage 24V DC Constant Voltage Power Consumption 12W 12W 15W 10W Power Factor 1 LED Qty/meter 56 56 56 60 + 60 Dimming Physical Materials 110-277v 0-10v & Magnetic Low Voltage Polyvinyl Chloride (PVC) LED Spacing 17.8 mm / 0.70 inch 17.8 mm / 0.70 inch 17.8 mm / 0.70 inch 16.7 mm / 0.66 inch Cutting Length 125 mm / 4.92 inch 125 mm / 4.92 inch 125 mm / 4.92 inch 100 mm / 3.94 inch Package Size: 340 340 120 millimeters / 13.4 13.4 4.7 inches Weight/Meter: Thermal Management Fixture Connections Bend Tolerances Maximum Diameter (horizontal bending only) Temperature Ranges Installation Operating Humidity Dependability Warranty Safety Certification IP Rated 325 Grams /.71 Pounds Cool to the Touch, Free Air Convection Front & End Leader Cables 120 millimeters / 4.7 inches 0 to 45 Celsius / 32 to 113 Fahrenheit -20 to 45 Celsius / -4 to 113 Fahrenheit 0-95% Non Condensing 3 years Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 Factory Order/ IP68 with Accessories *For DMX controller inquiries please check our website or call for customer service. **Photometric Data available upon request or at
3 Year D:120mm RGB 160 3 Year Colors Available Color Red Green Blue CCT Wave Length 620-630 Nanometer 520-530 Nanometer 465-475 Nanometer Lumen Count Color Per Meter Per Foot Power Profiles Red >22lm >6.71lm - Green >90lm >27.43lm - Blue >18lm >5.49lm - R+G+B (white) >130lm >39.62lm 12W/m 3.66W/ft Tolerance of the light is ±0.3mm. Mounting Horizontal Bending Only Bend light perpendicular to the direction of the circuit board. Minimum Bend Diameter 4.72 inch
D:120mm RGB 160 3 Year 3 Year Photometric Data Candle Power Distribution Luminance Characteristics Caution Before making any cuts, installation, maintenance or connection, be sure the fixture is disconnected! Note: all connector joints must be connected correctly to achieve IP68 rating. Only operate this flex light according to the instructions, the working voltage must match product requirements. Be sure to confirm the polarity of the connector before inserting the front connection cable. Be sure to connect and cut this product correctly. Incorrect cutting and connecting will damage this product. Use correct DC power supply. Do not power the light for over 30 minutes in coil packaging. Do not bend past the minimum diameter or twist this fixture. Doing so will result in damaging the internal circuit board. Do not put undue stress or pull excessively on the cables or injection connectors. This can cause the connectors to detach or fail. Do not mix the four colors (R, G, B, W) in full load simultaneously. To extend the life of your fixtures, do not operate lights in daylight temperatures exceeding 113 F (45 C). Doing so will decrease the lifespan of the product. To extend the life of your fixtures, it is recommended to turn off your lights for a short time after 8 continuous hours of operation. Doing so helps the heat dissipate.
Injection-moulded End Fittings Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only. Bottom Exit Cable Connects light to power supply with pre-installed bottom cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFB-1m LN-11X21-RGB-FA-PFB-3m 22.8mm 1.8mm Side Exit Cable Connects light to power supply with pre-installed side cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFS-1m LN-11X21-RGB-FA-PFS-3m 22.8mm 12mm 1.8mm 18mm End Exit Cable Connects light to power supply with pre-installed end cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFE-1m LN-11X21-RGB-FA-PFE-3m 18mm 22.8mm End Cap 1.8mm Pre-installed termination protection of the light, IP68. LN-11X21-FA-EC
End Fittings Stocked accessories. Standard on non-factory orders. ** Image shown is for rounded profile connector ** Bottom Power Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-IP68-1M-RB LN-11X21-IP68-3M-RB Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate *1 33mm 20.5mm 43mm Snap Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-IP68-SC-1M LN-11X21-IP68-SC-3M Feed connector * 1 (PC Cover), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1 End Cap Termination protection of the light. IP68. LN-11X21-IP68-SC-END Tail plug * 1 Silicone gasket *1 PC Cover * 1 Crimp Plate * 1 Optional Accessory Male and Female Connectors Cutter - LN-16X16-FA-ISC Please Note: Factory order only. *Installation guide available upon request or at
Mounting Channel Aluminum Mounting Channel.94 inch.87 inch.54 inch /.14 inch 50 mm / 1.97 inch LN-11-AL-CLIP 25 mm /.98 inch / Φ 3.5 mm /.14 inch 3 Basic, 160 & 270 Models 1000 mm / 39.37 inch LN-11-AL-1M-CHAN 100 mm / 3.94 inch 200 mm / 7.87 inch Φ 3.5 mm /.14 inch 5 Basic, 160 & 270 Models Plastic Mounting Channel.55 inch Please Note: Production Order Only. 21 Day Lead Time. /.14 inch 300 mm / 11.81 inch LN-11-PL-CLIP 50 mm / 1.97 inch 200 mm / 7.87 inch Φ 3.5 mm /.14 inch 3 Basic, 160 & 270 Models 1000 mm / 39.37 inch LN-11-PL-1M-CHAN 100 mm / 3.94 inch 200 mm / 7.87 inch Φ 3.5 mm /.14 inch 5 Basic, 160 & 270 Models
Self-locking Aluminum Mounting Channel Uses: Ceilings and Vertical Installations 50 mm / 1.97 inch LN-11-PL-CLIP 25 mm /.98 inch / 25 mm /.98 inch 350 mm / 13.78 inch Φ 3.5 mm /.14 inch 3 2 1000 mm / 39.37 inch LN-11-AL-1M-CHAN-SL 100 mm / 3.94 inch 200 mm / 7.87 inch 150 mm / 5.91 inch 350 mm / 13.78 inch Φ 3.5 mm /.14 inch 5 3 Self-locking Clip Standard Length 50mm / 1.96 inch LN-11-AL-CLIP-(SL) Naming Convention LN-11X21-24-RGB RGB - Fixture Color 24V - Voltage 11X21 - Profile Size LN - LED Neon Flex
Testing Results for LED Neon Flex RGB 160 Performance Optical Testing Photometric test-integrating sphere system Photometric test-goniophotometer system Illuminance efficiency ratio Uniformity of lighting surface (led neon flex light) RGB color mixture uniformity (led neon flex light) Lumen maintenance test Color-coordinate shift Standard/Reference value/description IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length) IES LM 79(lumen intensity distribution & Lux diagram) Product specification sheet Evaluate indirect glare Evaluate the uniformity of color IES LM 80 ANSI C78.377 Electrical Testing Normal Temperature Test (77 F) Normal Temperature Test(104 F) UL1598, IEC60598-1 UL1598, IEC60598-1 Reliability Testing Lifetime test Electrical insulation test Dielectric voltage withstand test Waterproof test Hi-Lo Temperature impact Ultraviolet (UV) light exposure Salt spray test Anti-cracking test (-13 F) Connector pull test IS TM 21 UI2388, IEC60598-1, >4M Ω UI2388, IEC60598-1, >1.5KV IP68/IP67/IP65-68 F 140 F ASTM G 26. Exposure Method 1 IEC68-2-11 Assess PVC s anti-cracking property under low temp. 50N Mechanics Testing Pull test (Connector, Body) Impact test Bending fatigue resistance test UI2388 IEC 62262, UL2388 UL2388, IEC60598-1
Charts
Power Supply Configuration Table The maximum length of light for different power supply ratings. Power Supply Rated Power /mtr 35w 60w 75w 80w 100w 120w 150w 185w 240w 320w 6.5w / 7.2w / 8w 3m 6m 7.5m 8m 10m 12m 15m 18m 24m 30m 10.6w / 11w / 12w 2m 3.5m 4.5m 5m 6m 7m 10m 12m 14m 20m Feed Setup Single Feed Double Feed Example: It is recommended to use one 80W power supply when loading maximum 8m light (7.2w/m) or maximum 5m light (12w/m) when powering the light at one end. Wavelength of Color Light
RGB 160 Project Details Project Name: Notes: Warehouse Locations United States Canada 6230 W. Desert Inn Rd. Las Vegas, NV 89146 264 Botsford Street, Unit #102 Moncton, NB E1C 4X7 For more information please contact WWW.GLLS.COM toll free: 1.888.580.NEON (6366) email: sales@ledneonflex.com