Xitanium LED driver Datasheet Xitanium LED drivers spot- and downlight SELV Enabling future-proof LED technology Our Xitanium prograable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires. Available in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. Additionally, almost all drivers feature the following specifications: SELV, improved ripple current, temperature derating, hot wiring, providing OEMs the tools to produce, and even alter later if necessary, premium downlights and spotlights. enefits Features Application High reliability underpinned by 5 year Operating windows - output current can be adjusted Retail via the Philips MultiOne configurator ('TD' drivers) or Office warranty Future-proof flexibility - with a resistor outside the driver or SimpleSet application-oriented operating Power ratings: 10-75W windows enable LED generation and hoice of housing designs -linear housing for tracks in complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs '3 in 1' in design, conventional HID housings for down and Spotlighting and WH housing for independent use with strain relief and loop through
Electrical input data Rated input voltage 220...240 Vac Rated input frequency 50...60 Hz Rated input current 0.19 A Input voltage 230 Vac Rated input power 44 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 89 @230V @ max. rated output power Rated input voltage D 186...250 Vdc Rated input current D 0.24 A Input voltage 230 Vdc, full load Input voltage A 202...254 Vac Operational range Input frequency A 47.5...63 Hz Maximum performance range Input voltage D 168...275 Vdc Maximum operational range Regulation method onstant urrent Output voltage 24...54 Vdc Output voltage max. 60 V Peak voltage at open load Output current 300...1000 ma onfigurable output current range Output current tolerance ±5 Output current ripple LF 4 Output power 11...37 W ontrol method Touch and DALI diing Diing range 1...100 Default range @230V @ max. rated output power @230V @ max. rated output power @ full load. See graph. Electrical output data Ripple = peak / average Electrical data controls input Logistical data Product name Order code 8718696515587 Logistic code 12N 9290 009 69906 EAN3 8718696515594 Pieces per box 20 2/8
Wiring & onnections Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Input wire strip length 8.5...9.5 Input wire cross-section 0.5...2.5 2 WAGO804, solid wire 12...20 AWG WAGO804, solid wire Input wire strip length 10...11 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Output wire strip length 8.5...9.5 Maximum output cable length LED+ and LED- 0.6 m Total length of wiring including LED module, one way Insulation Insulation input input output SELV DALI asic 3/8 output DALI SELV asic SELV SELV
Dimensions and weight Length (A1) 200 Width (1) 74.2 Height (1) 32 Fixing hole diameter (D1) Fixing hole distance (A2) Weight 204 gram Operational temperatures and humidity Driver ambient temperature -20...+65 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 85 Maximum temperature measured at Tc-point Tcase-life 75 Measured at Tc-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 Non-condensing Ambient temperature -25...+85 Relative humidity 5...95 exceeded. Storage temperature and humidity 4/8 Non-condensing
Lifetime Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (AO) SimpleSet See Design-in guide. Default output current: 300 ma onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics output power to 15 Features Open load protection Remark Automatic recovering Short circuit protection Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for luminaire insulation class I and II Acc. IE60598-1 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 5/8
Inrush current Inrush current Ipeak 20.4 A Input voltage 230V Inrush current Twidth 195 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 24 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current 0.7 ma peak Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us ontrol surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us AO 300 ma LO 100 Surge iunity Additional information 6/8
Graphs Operating window Power factor versus output power Efficiency versus output power 7/8
THD versus output power 2015 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: December 18, 2015 www.philips.com/technology