XS Roof Type Installation Overview
XS Linked CABLE system ON STEEL ROOF Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an XS Linked Cable System are the permanent XS Impact anchorage points and the XS Slider. These components enable free movement along the system. The lifeline adapts smoothly to steel roofing materials to protect workers from fall hazards. Thanks to the XS Linked Cable System, risks are minimized without compromising a worker s movement. Exploded View XS Linked Cable System For example: XS Intermediate XS Bending Kit Capping Sheet XS Toggle Anchor XS Base Plate Waterproofing Membrane Insulation Steel (plate) Structure 2 For example with use of an XS Intermediate 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON STEEL ROOF Drawings & Impressions Suitable for steel roofs min. 0.75mm thick By mounting on top of the insulation and roofing, you minimize damage to the roof All XSPlatforms anchorages are tested according to: ANSI/ ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA Z259, and EN795 class A1 and C. Also available as a Linked Pro System Parts & Materials 11125 XS Bending Kit Stainless Steel AISI 304 *11126 11110 XS Base Plate Aluminum (For other finishes, contact inside sales) 11300 XS Toggle Anchor Stainless Steel AISI 304 *11301 12400 XS Intermediate Stainless Steel AISI 304 *12401 13100 XS Cable Stainless Steel AISI 316 *Denotes Product Number for Stainless Steel AISI 316 Model RIGIDLIFELINES.COM 800-869-2080 For example with use of an XS Intermediate 3
XS Linked CABLE system ON STEEL ROOF Parts & Materials XS Impact - 11100 The XS Impact is used to support the XS Linked System, as a stand-alone anchorage point and as an anchorage point in horizontal temporary lifeline systems. The anchorage point is tested according the EN795 in classes A1 and C. The anchor will not be activated until a force of 3kN is applied to the anchor. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Toggle Anchor - 11300 The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its special shape allows the anchor to be pushed through the roofing. XS Terminal (hold) - 12235 One end is swaged to the lifeline. The other end is connected to an XS Impact anchorage point, with a stainless steel AISI 304 socket head screw M12 x 35 mm. XS Tensioner II System - 12300 Consists of XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and stainless steel threaded shaft) acts as the attachment point between the XS Hold and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct tension of the cable ensures correct functioning of all system components in the event of a fall. XS Point - 13330 The XS Point is a special entrance and exit point which makes it impossible for the slider to be disconnected outside of the XS Point. The XS Point can only be used in combination with the XS Slider Pro. 4 For example with use of an XS Intermediate 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON STEEL ROOF Parts & Materials XS Intermediate - 12400 The XS Intermediate is used to position the lifeline cable. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. It can be installed in many different configurations and at regular intervals to ensure the optimum distribution of forces along the lifeline. XS Edge 45 o - 12500 The XS Edge 45 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Edge 90 o - 12600 The XS Edge 90 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Slider - 12810 The XS Slider allows a user to move easily along the cable. Its unique shape and design enables smooth passage through brackets without disconnecting from the line. Hooking and unhooking the XS Slider is possible at any location on the wire rope. The locking system of the runner eliminates any possibility of incorrect manipulation during connection to the cable. XS Slider Pro - 12820 The XS Slider Pro can easily make an angle up to 40 thanks to the addition of the integrated guiding sleeve (a rotating tube ). The guiding sleeve ensures that the XS Slider Pro passes brackets and corners more easily when working at an angle. The XS Slider Pro can only be used in combination with the XS Point. The XS Point is a special entrance and exit point that makes it impossible to disconnect the XS Slider Pro elsewhere on the system. RIGIDLIFELINES.COM 800-869-2080 For example with use of an XS Intermediate 5
XS Linked CABLE system ON CONCRETE ROOF When installing an XSPlatforms system on concrete, the XS Linked Cable System uses the permanent XS Mechanical Anchor instead of the XS Toggle Anchor. This device has been designed to provide a solid anchorage point specifically for solid and hollow core concrete installations. This system allows workers to move with protected freedom as they perform various tasks at height. Exploded View XS Linked Cable System For example: XS Edge 90 o XS Bending Kit Capping Sheet XS Mechanical Anchor XS Base Plate Waterproofing Membrane Insulation Concrete Structure 6 For example installation on solid concrete with use of an XS Edge 90 o 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON CONCRETE ROOF Drawings & Impressions Suitable for: regular concrete and hollow core concrete (strength class at least C40/50) By mounting on top of the insulation and roofing, you minimize damage to the roof All XSPlatforms anchorages are tested according to: ANSI/ ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA Z259, and EN795 class A1 and C. Also available as a Linked Pro System 11125 XS Bending Kit Stainless Steel AISI 304 *11126 11110 XS Base Plate Aluminum (For other finishes, contact inside sales) 11400 XS Mechanical Anchor Stainless Steel AISI 304 *11401 Galvanized steel 12600 XS Edge 90 o Stainless Steel AISI 304 *12601 13100 XS Cable Stainless Steel AISI 316 *Denotes Product Number for Stainless Steel AISI 316 Model RIGIDLIFELINES.COM 800-869-2080 For example installation on solid concrete with use of an XS Edge 90 o 7
XS Linked CABLE system ON CONCRETE ROOF Parts & Materials XS Impact - 11100 The XS Impact is used to support the XS Linked Cable System, as a stand-alone anchorage point and as an anchorage point in horizontal temporary lifeline systems. The anchorage point is tested according the EN795 in classes A1 and C. The anchor will not be activated until a force of 3kN is applied to the anchor. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Mechanical Anchor - 11400 The XS Mechanical Anchor is used for fixing the anchorage point to the roof. It is a Fischer anchor specifically developed for high strength mounting in concrete. XS Terminal (hold) - 12235 One end is swaged to the lifeline. The other end is connected to an XS Impact anchorage point with a stainless steel AISI 304 socket head screw M12 x 35 mm. XS Tensioner II System - 12300 Consists of the XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and stainless steel threaded shaft) acts as the attachment point between the XS Hold and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct tension of the cable ensures correct functioning of all system components in the event of a fall. XS Point - 13330 The XS Point is a special entrance and exit point that makes it impossible for the slider to be disconnected outside of the XS Point. The XS Point can only be used in combination with the XS Slider Pro. 8 For example installation on solid concrete with use of an XS Edge 90 o 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON CONCRETE ROOF Parts & Materials XS Intermediate - 12400 The XS Intermediate is used to position the lifeline cable. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. It can be installed in many different configurations and at regular intervals to ensure the optimum distribution of forces along the lifeline. XS Edge 45 o - 12500 The XS Edge 45 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Edge 90 o - 12600 The XS Edge 90 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Slider - 12810 The XS Slider allows a user to move easily along the cable. Its unique shape and design enable smooth passage through brackets without disconnecting from the line. Hooking and unhooking the XS Slider is possible at any location on the wire rope. The locking system of the runner eliminates any possibility of incorrect manipulation during connection to the cable. XS Slider Pro - 12820 The XS Slider Pro can easily make an angle of up to 40 thanks to the addition of the integrated guiding sleeve (a rotating tube ). The guiding sleeve ensures that the XS Slider Pro passes brackets and corners more easily when working at an angle. The XS Slider Pro can only be used in combination with the XS Point. The XS Point is a special entrance and exit point that makes it impossible to disconnect the XS Slider Pro elsewhere on the system. RIGIDLIFELINES.COM 800-869-2080 For example installation on solid concrete with use of an XS Edge 90 o 9
XS Linked CABLE system ON Wooden ROOF Installing an XS Linked Cable System on a wooden roof is slightly different from other roof materials. Once the permanent XS Toggle Anchor is in place, the XS Base Plate Extra is used for additional stability on soft roof materials like wood. Using this system will allow workers to move freely as they perform tasks. Exploded View XS Linked Component For example: XS Terminal XS Bending Kit Capping Sheet XS Toggle Anchor Extremity and Corner Fixation XS Base Plate XS Base Plate Extra (18 mm) Waterproofing Membrane Insulation Wooden Structure 10 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON Wooden ROOF Suitable for plywood: min. 12 mm (in connection with the 12 mm XS Base Plate Extra), min. 18 mm (in connection with 18 mm XS Base Plate Extra) By mounting on top of the insulation and roofing, you minimize damage to the roof All XSPlatforms anchorages are tested according to: ANSI/ ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA Z259, and EN795 class A1 and C. Drawings & Impressions Also available as a Linked Pro System Parts & Materials 11125 XS Bending Kit Stainless Steel AISI 304 *11126 11110 XS Base Plate Aluminum (For other finishes, contact inside sales) 11300 XS Toggle Anchor Stainless Steel AISI 304 *11301 11700 XS Base Plate Extra (18 mm) Aluminum 12235 XS Terminal (hold) Stainless Steel AISI 304 *12236 13100 XS Cable Stainless Steel AISI 316 *Denotes Product Number for Stainless Steel AISI 316 Model RIGIDLIFELINES.COM 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 11
XS Linked CABLE system ON Wooden ROOF Parts & Materials XS Impact - 11100 The XS Impact is used to support the XS Linked Cable System, as a stand-alone anchorage point and as an anchorage point in horizontal temporary lifeline systems. The anchorage point is tested according to the EN795 in classes A1 and C. The anchor will not be activated until a force of 3kN is applied to the anchor. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Toggle Anchor - 11301 The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its special shape allows the anchor to be pushed through the roofing. Extremity and Corner Fixation - 11500 The Extremity and Corner Fixation is a set of screws used for fixing corners and extremity posts of the XS Linked Cable System on steel and wooden roofs. The screws fit the holes in the corner of the XS Base Plate and XS Base Plate Extra. The length of the screws depends on the thickness of the insulation material. The screws provided are suitable for most applications. If you require different screws, please contact our sales department. Make sure that the Ø6 screws you use are at least 35 mm longer than the thickness of the insulation. XS Base Plate Extra (18 mm) - 11700 The XS Base Plate Extra (18 mm) is used beneath the XS Base Plate for installing the XS Impact, XS Globe, and XS Impact 360 on wooden roofs. 12 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON Wooden ROOF Parts & Materials XS Base Plate Extra (12 mm) - 11710 The XS Base Plate Extra (12 mm) is used under the XS Base Plate to assemble the XS Impact, XS Globe, and XS Impact 360 on (12 mm) plywood roofs. The aluminum adapter plate is mounted to the roof using four M10 XS Toggle Anchors. XS Terminal (hold) - 12230 One end is swaged to the lifeline. The other end is connected to an XS Impact anchorage point, with a stainless steel AISI 304 socket head screw M12 x 35 mm. XS Tensioner II System - 12300 Consists of the XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and stainless steel threaded shaft) acts as the attachment point between the XS Hold and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct tension of the cable ensures correct functioning of all system components in the event of a fall. XS Point - 13330 The XS Point is a special entrance and exit point that makes it impossible for the slider to be disconnected outside of the XS Point. The XS Point can only be used in combination with the XS Slider Pro. XS Intermediate - 12400 The XS Intermediate is used to position the lifeline cable. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. It can be installed in many different configurations and at regular intervals to ensure the optimum distribution of forces along the lifeline. RIGIDLIFELINES.COM 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 13
XS Linked CABLE system ON Wooden ROOF Parts & Materials XS Edge 45 o - 12500 The XS Edge 45 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Edge 90 o - 12600 The XS Edge 90 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Slider - 12810 The XS Slider allows a user to move easily along the cable. Its unique shape and design enable smooth passage through brackets without disconnecting from the line. Hooking and unhooking the XS Slider is possible at any location on the wire rope. The locking system of the runner eliminates any possibility of incorrect manipulation during connection to the cable. XS Slider Pro - 12820 The XS Slider Pro can easily make an angle up to 40 thanks to the addition of the integrated guiding sleeve (a rotating tube ). The guiding sleeve ensures that the XS Slider Pro passes brackets and corners more easily when working at an angle. The XS Slider Pro can only be used in combination with the XS Point. The XS Point is a special entrance and exit point that makes it impossible to disconnect the XS Slider Pro elsewhere on the system. 14 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIDLIFELINES.COM
RIGIDLIFELINES.COM 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 15
XS Globe & XS Impact 360 o ON STEEL ROOF The XS Globe anchorage point is comprised of two main components: the XS Globe Eye and the XS Base Plate, which is fixed to the roof and holds the XS Globe Eye. The XS Globe is used as a stand-alone anchorage point and/or as an anchorage point to Personal Protective Equipment (PPE). The XS Impact 360 combines the XS Impact with the XS Globe anchorage point and absorbs the shock of a fall. The XS Base Plate is fixed to the roof and holds the XS Bending Kit. These anchorage points can also be installed on the XS Xtrusion. Exploded View XS Safety Eye 360 o XS Bending Kit Capping Sheet XS Toggle Anchor XS Base Plate Waterproofing Membrane Insulation Steel (plate) Structure 16 For example an XS Impact 360 o installation on steel roofing 800-869-2080 RIGIDLIFELINES.COM
XS Globe & XS Impact 360 o Suitable for: all types of roofs or systems By mounting on top of the insulation and roofing, you minimize the damage to the roof An XS Globe Eye/XS Safety Eye 360 o can be used in every direction, to give you maximum freedom of movement All XSPlatforms anchorages are tested according to: ANSI/ ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA Z259, and EN795 class A1 and C. Drawings & Impressions Parts & Materials 11125 XS Bending Kit Stainless Steel AISI 304 *11126 11110 XS Base Plate Aluminum (For other finishes, contact inside sales) 11210 XS Globe Eye Stainless Steel AISI 304 *11211 11260 XS Safety Eye 360 o Stainless Steel AISI 304 *11261 11300 XS Toggle Anchor Stainless Steel AISI 304 *11301 11400 XS Mechanical Anchor Stainless Steel AISI 304 *11401 Galvanized steel 11700 XS Base Plate Extra (18 mm) Aluminum *Denotes Product Number for Stainless Steel AISI 316 Model RIGIDLIFELINES.COM 800-869-2080 For example a XS Impact 360 o installation on steel roofing 17
XS Globe & XS Impact 360 o Parts & Materials XS Impact - 11100 The XS Impact is used to support the XS Linked Cable System as a stand-alone anchorage point and as an anchorage point in horizontal temporary lifeline systems. The anchorage point is tested according the EN795 in classes A1 and C. The anchor will not be activated until a force of 3kN is applied to the anchor. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Base Plate - 11110 Attachment of the XS Base Plate depends on the roof type. Use the XS Toggle Anchor (11300) with wooden or steel roofs and the XS Mechanical Anchor (11400) with concrete or hollow section concrete roofs. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Globe Eye - 11210 The XS Globe Eye is used as a stand-alone anchorage point and as an anchorage point to PPE. The anchorage point is tested according to the EN795 in classes A1 and C. XS Safety Eye 360 o - 11260 The XS Safety Eye 360 is used as a stand-alone anchorage point and as an anchorage point to PPE. The anchorage point is tested according to the EN795 in classes A1 and C. The anchor will not be activated until a force of 3kN is applied to the anchor. The anchor is tested against a continuous force of 10kN. The ultimate strength after deployment is greater than 20kN. XS Toggle Anchor - 11300 The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its special shape allows the anchor to be pushed through the roofing. 18 For example an XS Impact 360 o installation on steel roofing 800-869-2080 RIGIDLIFELINES.COM
XS Globe & XS Impact 360 o Parts & Materials XS Mechanical Anchor - 11400 The XS Mechanical Anchor is used for fixing the anchorage point to the roof. It is a Fischer Anchor specifically developed for high-strength mounting in concrete. Extremity and Corner Fixation - 11500 The extremity and corner fixation is a set of screws used for fixing corners and extremity posts of the XS Linked lifeline system on steel and wooden roofs. The screws fit the holes in the corner of the XS Base Plate and XS Base Plate Extra. The length of the screws depends on the thickness of the insulation material. The screws provided are suitable for most applications. If you require different screws, please contact our sales department. Make sure that the Ø6 screws you use are at least 35 mm longer than the thickness of the insulation. XS Base Plate Extra (18 mm) - 11700 The XS Base Plate Extra (18 mm) is used beneath the XS Base Plate for installing the XS Impact, XS Globe, and XS Impact 360 on wooden roofs. XS Base Plate Extra (12 mm) - 11710 The XS Base Plate Extra (12 mm) is used under the XS Base Plate to assemble the XS Impact, XS Globe, and XS Impact 360 to (12 mm) plywood roofs. The aluminum adapter plate is mounted to the roof using four M10 XS Toggle Anchors. XS Xtrusion - 11800 The XS Xtrusion is used to support the XS Linked Cable System. It could also be used as a stand-alone anchorage point and as an anchorage point in a horizontal temporary anchor line and in combination with an XS Safety Eye 360 0. RIGIDLIFELINES.COM 800-869-2080 For example an XS Impact 360 o installation on steel roofing 19
XS Linked CABLE system ON XS Xtrusion An XS Linked Cable System is comprised of different components that form a horizontal lifeline system. The main components of an XS Linked Cable System are the XS Impact anchorage points and the XS Slider that enables free movement along the system. The lifeline allows horizontal movement when working at heights. The system can be fixed to almost any type of roof construction. It is installed as a safeguard in places where working at heights can present risks. Risks are minimized, and the ability to work at the required height is not compromised. Exploded View XS Linked Component For example: XS Terminal XS Bending Kit Rings & Nuts Deck Socket XS Xtrusion (base deck) Secret Fix Kit Secret Fix Roofing 20 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON XS Xtrusion Drawings & Impressions Suitable for roofs with: (min. 1 mm) Kalzip, (min. 1 mm) built-up-on-site and secret fix profiles Can serve as a stand-alone anchoring point on a Kalzip roof or as support for the XS Linked System Adjustable width (depending on profile distance) The XS Xtrusion was also tested on 0.8 mm zinc roof with double standing seam Parts & Materials 11125 XS Bending kit Stainless Steel AISI 304 *11126 11800 XS Xtrusion Stainless Steel AISI 304 *11801 Aluminum 11880 XS Secret Fix Kit Stainless Steel AISI 304 12235 XS Terminal (hold) Stainless Steel AISI 304 *12236 13100 XS Cable Stainless Steel AISI 316 *Denotes Product Number for Stainless Steel AISI 316 Model RIGIDLIFELINES.COM 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 21
XS Linked CABLE system ON XS Xtrusion Parts & Materials XS Xtrusion - 11800 The XS Xtrusion is used to support the XS Linked Cable System. It could also be used as a stand-alone anchorage point and as an anchorage point in horizontal temporary anchor line and in combination with an XS Safety Eye 360 0. XS Standing Seam Kit 1-11840 The XS Standing Seam Kit 1 attaches the XS Xtrusion anchoring point to roofs with (min. 1 mm) Kalzip profiles. The XS Standing Seam Kit 1 is fixed to the XS Xtrusion by 4 M10 bolts and mounted to the standing seam roofing with 4 x screws. XS Standing Seam Kit 2-11850 The XS Standing Seam Kit 2 attaches the XS Xtrusion anchoring point to zinc or copper roofs. This U-clip can be mounted either vertically or horizontally. The XS Standing Seam Kit 2 is fixed to the XS Xtrusion by 4 M10 bolts and mounted to the standing seam roofing with 4 x screws. XS Standing Seam Kit 3-11860 The XS Standing Seam Kit 3 attaches the XS Xtrusion anchoring point to zinc or copper roofs (min. 0.8 mm). The XS Standing Seam Kit 3 is fixed to the XS Xtrusion by 4 M10 bolts and mounted to the standing seam roofing with 4 x screws. 22 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIDLIFELINES.COM
XS Linked CABLE system ON XS Xtrusion Parts & Materials XS Built-Up-On-Site Kit - 11870 The XS Built-Up-On-Site-Kit is used to mount the XS Xtrusion anchorage point on a roof constructed using built-up-on-site roofing. It can be used as a stand-alone anchorage point or as a support for a XS Linked Cable System. The XS Built-Up-On-Site-Kit is fixed to the XS Xtrusion by 4 mounting plates and mounted to the built-up-on-site roofing with 4 x 6 blind rivets. XS Secret Fix Kit - 11880 The XS Secret Fix Kit is used to mount the XS Xtrusion anchorage point on a roof made up of a secret fix profile. It can be used as a stand-alone anchorage point or as a support for a XS Linked Cable System. The XS Secret Fix Kit is fixed to the XS Xtrusion by 4 mounting plates and mounted to the secret fix roofing with 4 x 6 blind rivets. XS Terminal (hold) - 12235 One end is swaged to the lifeline. The other end is connected to an XS Impact anchorage point with a stainless steel AISI 304 socket head screw M12 x 35 mm. XS Tensioner II System - 12300 Consists of XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and stainless steel threaded shaft) acts as the attachment point between the XS Hold and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct tension of the cable ensures correct functioning of all system components in the event of a fall. XS Point - 13320 The XS Point is a special entrance and exit point that makes it impossible for the slider to be disconnected outside of the XS Point. The XS Point can only be used in combination with the XS Slider Pro. RIGIDLIFELINES.COM 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 23
XS Linked CABLE system ON XS Xtrusion Parts & Materials XS Intermediate - 12400 The XS Intermediate is used to position the lifeline cable. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. It can be installed in many different configurations and at regular intervals to ensure the optimum distribution of forces along the lifeline. XS Edge 45 o - 12500 The XS Edge 45 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Edge 90 o - 12600 The XS Edge 90 enables the direction of the lifeline cable to be changed. It is shaped specifically to allow a user to move safely without needing to disconnect from the lifeline. XS Slider - 12810 The XS Slider allows a user to move easily along the cable. Its unique shape and design enable smooth passage through brackets without disconnecting from the line. Hooking and unhooking the XS Slider is possible at any location on the wire rope. The locking system of the runner eliminates any possibility of incorrect manipulation during connection to the cable. XS Slider Pro - 12820 The XS Slider Pro can easily make an angle up to 40 thanks to the addition of the integrated guiding sleeve (a rotating tube ). The guiding sleeve ensures that the XS Slider Pro passes brackets and corners more easily when working at an angle. The XS Slider Pro can only be used in combination with the XS Point. The XS Point is a special entrance and exit point that makes it impossible to disconnect the XS Slider Pro elsewhere on the system. 24 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIDLIFELINES.COM
RIGIDLIFELINES.COM 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 25
26 800-869-2080 RIGIDLIFELINES.COM
About Rigid Lifelines Rigid Lifelines is a North American leader in turnkey fall protection solutions. We manufacture and distribute a wide range of fall arrest, fall restraint, fall prevention, hard goods, soft goods, and accessories. Rigid Lifelines engineers superior systems and solutions for common problems in fall protection. These systems are ideal for keeping industrial employees protected while working at height. Rigid Lifelines manufactures fall protection systems in two locations in the United States Morgantown, Pennsylvania and Las Vegas, Nevada. We are proud to be a Certified Welding Fabricator in accordance with the American Welding Society. Plus, all of our fall protection systems exceed OSHA and ANSI requirements. Rigid Lifelines is proud to offer fall protection solutions for any location inside or outside of industrial and construction facilities. Our product line includes: Engineered Track XSPlatforms Rooftop Solutions Soft Goods Dealer Training Rigid Lifelines proudly engineers rigid track systems for various applications. Steel, stainless steel, or aluminum enclosed tracks can be used to adapt to the needs of your facility. To ensure complete compliance, all of our systems meet or exceed OSHA and ANSI requirements. Plus, our engineered track systems have superior warranties. XSPlatforms uses advanced fall protection technology to provide rooftop solutions for different types of roofing materials. The patented design of the anchorage device allows for faster and less invasive installation. Plus, each anchorage can cover longer distances in comparison to other rooftop systems. As part of our comprehensive line of fall protection solutions, Rigid Lifelines is proud to offer several types of full body harnesses, energy absorbing lanyards, and self-retracting lifelines. Our harnesses use the latest technology to provide a secure and comfortable fit. Our experienced staff has developed a comprehensive fall protection training program for our dealers. Our program covers: OSHA and ANSI Z359 requirements for General Industry and Construction, properly fitting a full body harness, identifying fall hazards, system installation considerations, and a basic overview of all Rigid Lifelines products. RIGIDLIFELINES.COM 800-869-2080 27
rigidlifelines.com info@rigidlifelines.com 604 Hemlock Road Morgantown, PA 19543 800-869-2080 610-286-7200 610-286-0085 Fax Form # RLL-XSO-0411 V1