KWS Door Hardware Building hardware
Contents Informations General informations Page 3 Door Hardware Door Handles Page 4 Modular System Page 6 Door Holders and Gate Holders Page 8 Door Stops Page 10 Flush Pulls and Locks Page 12 Flush Pulls, Door Pulls, Door Knobs, Door Bells Page 13 Appendix Door Handle fastening Page 14 Finishes chart Page 15 2
General informationen Whether space-saving recessed handles or classic door handles, door and practical door holders or protective door buffers, the wide range of fittings of the KWS brand offers solutions for customer needs around the door. The technically mature products shows a wide range of applications and complemented each other. Standard products and custom designs from the various areas are characterized by a harmonious design and the use of high quality materials. This brochure presents an overview of our KWS range area Hardware for Doors. Please ask for more detailed information for our catalogs for door holders and door stops (TEK_0102), door handles and door knobs (TEK_0308), flush pulls and locks (TEK_0506) to. 3
Door Handles KWS Door Handles made of aluminium, stainless steel and brass aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, coloured plastic-coated.70 brass, brushed.61 btass, polished.65 stainless steel, polished.83 KWS Door handle 8133.. Ø 30 mm L = 300 mm 8285.. Ø 30 mm L = 350 mm 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 item-no. aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, cloloured plastic- coated.70 brass, brushed.61 brass, polished.65 stainless steel, polished.83 KWS Door handle 8915.. Ø 30 mm L = 300 mm 8918.. Ø 30 mm L = 350 mm door handle fastening 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, coloured plastic- coated.70 brass, brushed.61 brass, polished.65 stainless steel, polished.83 KWS Door handle 8933.. Ø 30 mm L = 300 mm 8936.. Ø 30 mm L = 350 mm 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, coloured plastic-coated.70 brass, brushed.61 brass, polished.65 stainless steel, polished.83 KWS Door handle 8178.. Ø 25 mm 8179.. Ø 30 mm 8169.. Ø 35 mm 8180.. Ø 40 mm 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, coloured plastic- coated.70 brass, brushed (not for 8169..).61 brass, polished (not for 8169..).65 stainless steel, polished.83 KWS Door handle, Support C 8178.. Ø 25 mm 8179.. Ø 30 mm 8169.. Ø 35 mm 8180.. Ø 40 mm 8B03, 8B51, 8B53 and 8B73 aluminium, machined according to E4.22/.23/.24/.27/.28/.29 aluminium, coloured plastic- coatedq.70 brass, brushed (not for 8797..).61 brass, polished (not for 8797..).65 stainless steel, polished.83 KWS Door handle 8758.. Ø 25 mm 8768.. Ø 30 mm 8797.. Ø 35 mm 8778.. Ø 40 mm 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 8B79 4
Door Handles KWS Door Handles made of aluminium, stainless steel and brass KWS Door Handle stainless steel, polished.83 8170.. Ø 25 mm 8171.. Ø 30 mm 8137.. Ø 35 mm 8172.. Ø 40 mm 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 item-no. stainless steel, polished.83 KWS Door Handle 8155.. Ø 40 mm oakwood/ stainless steel 8159.. Ø 40 mm beechwood/ stainless steel 8B03, 8B04, 8B51, 8B52, 8B53, 8B58, 8B73 and 8B79 KWS door handle 8537.. 40 x 10 mm 8B03, 8B53, 8B54 and 8B73 supports of aluminium KWS door handle 8525.. 30 x 30 x 2 mm 8B03, 8B53, 8B54 and 8B73 supports of aluminium Note: Further and sizes can be found in our catalogue TEK_0308 Door handle fixings on page 14 Ordering example Piece Part no. Finish no. L... Piece 8178.82 350 5
Modular System KWS Door Handles made of stainless steel, brushed item- no. with straight end support Ø 30 mm, to 1800 mm length 8011.82 Ø 35 mm, to 2200 mm length 8381.82 Ø 40 mm, to 2400 mm length 8161.82 with slanting end support 45 Ø 30 mm, to 1800 mm length 8016.82 Ø 35 mm, to 2200 mm length 8387.82 Ø 40 mm, to 2400 mm length 8167.82 KWS Door Handle Series WS 8A10, 8A71, 8B74 and 8B77 item- no. with straight end support Ø 35 mm, to 2200 mm length 8372.82 Ø 40 mm, to 2400 mm length 8373.82 with slanting end support 40 Ø 35 mm, to 2200 mm length 8388.82 KWS Door Handle Series WS2 (V2A) 8A10, 8A71, 8B74 and 8B77 item- no. with straight end support Ø 35 mm, to 2200 mm length 8372.87 Ø 40 mm, bis 2400 mm length 8373.87 with slanting end support 40 Ø 35 mm, to 2200 mm length 8388.87 KWS Door Handle Series WS4 (V4A) 8A10, 8B74 item- no. with straight end support Ø 30 mm, to 1800 mm length 8021.82 Ø 35 mm, to 2200 mm length 8023.82 Ø 40 mm, to 2400 mm length 8025.82 with slanting end support 45 Ø 30 mm, to 1800 mm length 8022.82 Ø 35 mm, to 2200 mm length 8024.82 Ø 40 mm, to 2400 mm length 8026.82 KWS Door Handle Series RS 8B03, 8B04, 8B51, 8B52, 8B58, 8B73, 8B76 and 8B79 Art.-Nr. with straight end support 25x25 mm 30 mm, to 2200 mm length 8028.82 with straight end support 35x35 mm 30 mm, to 2200 mm length 8030.82 with slanting end support 45 30 mm, to 2200 mm length 8029.82 KWS Door Handle Series KS-30 supports of aluminium, stainless steel effect anodised 8B03, 8B54, 8B73, und 8B76 Door Handle fixings on page 14 Ordering example Piece Part no. Finish no. L.. Piece 8372.87 500 mm 6
modular- system KWS - Series WS Straight end support Straight middle support Slanting end support (45 ) Slanting middle support (45 ) 8711.82 Ø 30,0 x 1,5 mm tube 8032.82 Ø 33,7 x 2,0 mm tube 8391.82 Ø 35,0 x 1,5 mm tube 8301.82 Ø 40,0 x 2,0 mm tube 8033.82 Ø 42,4 x 2,0 mm tube 8031.82 Ø 42,4 x 3,2 mm tube 8H91.82 Ø 35 mm wood 8H01.82 Ø 40 mm wood 8713.82 Ø 30,0 x 1,5 mm tube 8038.82 Ø 33,7 x 2,0 mm tube 8393.82 Ø 35,0 x 1,5 mm tube 8303.82 Ø 40,0 x 2,0 mm tube 8039.82 Ø 42,4 x 2,0 mm tube 8H93.82 Ø 35 mm wood 8H03.82 Ø 40 mm wood 8710.82 Ø 30,0 x 1,5 mm tube 8017.82 Ø 33,7 x 2,0 mm tube 8307.82 Ø 35,0 x 1,5 mm tube 8H07.82 Ø 35 mm wood 8709.82 Ø 30,0 x 1,5 mm tube 8018.82 Ø 33,7 x 2,0 mm tube 8347.82 Ø 35,0 x 1,5 mm tube 8H08.82 Ø 35 mm wood KWS - Series WS2 (V2A) and Series WS4 (V4A) Straight end support Straight middle support Slanting middle support (40 ) Slanting middle support (40 ) 8295.. Ø 33,7 x 2,0 mm tube 8395.. Ø 35,0 x 1,5 mm tube 8495.. Ø 40,0 x 2,0 mm tube 8595.. Ø 42,4 x 2,0 mm tube 8596.. Ø 42,4 x 3,2 mm tube 8H95.. Ø 35 mm wood 8H05.. Ø 40 mm wood 8265.. Ø 33,7 x 2,0 mm tube 8375.. Ø 35,0 x 1,5 mm tube 8465.. Ø 40,0 x 2,0 mm tube 8565.. Ø 42,4 x 2,0 mm tube 8H75.. Ø 35 mm wood 8H15.. Ø 40 mm wood Ordering information : execution series WS2 (V2A) =.82 und execution series WS4 (V4A) =.87 8275.. Ø 33,7 x 2,0 mm tube 8321.. Ø 35,0 x 1,5 mm tube 8H21.. Ø 35 mm wood 8255.. Ø 33,7 x 2,0 mm tube 8371.. Ø 35,0 x 1,5 mm tube 8H71.. Ø 35 mm wood KWS - Series RS Straight end support Straight middle support Slanting middle support (45 ) Slanting middle support (45 ) 8715.82 Ø 30,0 x 1,5 mm tube 8047.82 Ø 33,7 x 2,0 mm tube 8361.82 Ø 35,0 x 1,5 mm tube 8317.82 Ø 40,0 x 2,0 mm tube 8048.82 Ø 42,4 x 2,0 mm tube 8046.82 Ø 42,4 x 3,2 mm tube 8H61.82 Ø 35 mm wood 8H17.82 Ø 40 mm wood 8718.82 Ø 30,0 x 1,5 mm tube 8051.82 Ø 33,7 x 2,0 mm tube 8363.82 Ø 35,0 x 1,5 mm tube 8319.82 Ø 40,0 x 2,0 mm tube 8052.82 Ø 42,4 x 2,0 mm tube 8H63.82 Ø 35 mm wood 8H19.82 Ø 40 mm wood 8717.82 Ø 30,0 x 1,5 mm tube 8049.82 Ø 33,7 x 2,0 mm tube 8362.82 Ø 35,0 x 1,5 mm tube 8318.82 Ø 40,0 x 2,0 mm tube 8050.82 Ø 42,4 x 2,0 mm tube 8H62.82 Ø 35 mm wood 8H18.82 Ø 40 mm wood 8719.82 Ø 30,0 x 1,5 mm tube 8053.82 Ø 33,7 x 2,0 mm tube 8364.82 Ø 35,0 x 1,5 mm tube 8320.82 Ø 40,0 x 2,0 mm tube 8054.82 Ø 42,4 x 2,0 mm tube 8H64.82 Ø 35 mm wood 8H20.82 Ø 40 mm wood KWS - Series KS-30 Straight end support Straight middle support Slanting end support(45 ) 8702.35 Ø 30 x 30 x 2 mm tube 8704.35 Ø 30 x 30 x 2 mm tube 8703.35 Ø 30 x 30 x 2 mm tube Note: Further information about supports of the KWS modularsystem can be found in our brochure BEK_MS. 7
Door And Gate Holders KWS Door and Gate Holders made of aluminium and stainless steel, brushed 1002.. with permanent magnet 1013.. with clamp fixing 1113.. with clamp fixing, for glass doors 1023.. with clamp fixing.41.33 /.35 /.37 /.62 /.63 /.66.70 /.31 /.32 /.33 /.35 /.37.62 /.63 /.66.33 /.37 /.62 /.63 /.66 1015.. with magnet 1018.. with magnet 1110.. with hook 1009.. with hook and anchor bolt.02 /.70 /.31 /.32 /.33 /.37.62 /.66 /.31 /.66 /.33 /.35 /.37.33 /.35 /.37 /.62 /.63 /.66 1011.. with hook 1047.. with hook 1061.. with hook 1060.. with closing device.33 /.35 /.37.33 /.37.33 /.37 /.62 /.66.33 /.37 Ordering example Piece Part no. Finish no... Piece 1013.31 8
Door And Gate Holders KWS Door and Gate Holders made of aluminium and stainless steel, brushed 1024.. 25 mm lift 1026.. 30 mm lift 1038.. 30 mm lift with floor socket 1027.. 30 mm lift.02 /.03 /.10 /.70 /.62 /.66.02 /.03 /.10 /.70 /.62 /.66.02 /.03 /.10 /.70 /.62 /.66.33 /.37 1032.. 30 mm lift.02 /.03 /.10 /.70 /.62 /.66 1132.. 30 mm lift, for glass doors.62 /.66 / 1044.. 60 mm lift.33 /.35 /.37 also available with floor socket! 1220../1221.. 30 mm lift 1222../1223.. 60 mm lift 1224../1225.. 90 mm lift 1226../1227.. 120 mm lift 1228../1229.. 150 mm lift.02 /.03 /.10 /.70 /.35 /.41.42 /.43 /.47 1048.. with fastening rod, 250 mm lift.33 /.35 /.37 1311.. with hook.02 /.03 /.82 1121.. with hook for heavy doors and gates.02 /.03 /.06 /.10 /.70 /.82 1301.. with hook, of malleable cast iron.03 /.07 Note: Further informations about KWS door holders can be found in our catalogue TEK_0102 9
Door Buffer KWS Door Buffer made of aluminium, brass and stainless steel 2001.. 2003.. 2090.. with pin for inserting and fixing material 2110.. spring loaded.63 /.66 /.63 /.66 /.63 /.66 /.02 /.70 /.31 /.32 /.33 /.37.62 /.66 / 2097.. with black rubber ring, Ø 35 mm 2093.. with black rubber ring, Ø 50 mm 2095.. with black rubber ring, Ø 50 mm 2053.. for wall and ground mounting Ø 50 m.63 /.66 /.63 /.66 /.63 /.66 /.31 /.32 /.33 /.37 /.62 /.62 2024.. spring loaded 2124.. spring loaded 2049.. spring loaded 2051.. spring loaded.33 /.35 /.37 /.62 /.63 /.66.33 /.35 /.37.33 /.35 /.37.33 /.35 /.37 Ordering example Piece Part no Finish no... Piece 2001.32 10
Door Buffer KWS Door Buffer made of aluminium, brass and stainless steel 2008.. Ø 30 mm 2069.. Ø 30 mm 2064.. spring loaded 2009.. Ø 25mm.66 /.66 /.66 /.02 /.03 /.10 /.70 /.62 /.66 2006.. Ø 30 mm with black rubber buffer 2015.. Ø 40 mm, with black rubber buffer 2013.. Ø 40 mm, with black rubber buffer 2028.. Ø 40 mm, with black rubber buffer.66.02 /.03 /.06 /.10 /.70 /.31.32 /.33 /.37 /.62 /.66 /.82.83.70 /.31 /.32 /.33 /.37.33 /.37 2020.. with four threaded blind holes, for heavy doors and gates 2120.. with four screw holes, for heavy doors and gates 2021.. for screwing, for heavy doors and gates 2019.. with stone anchor, for heavy doors and gates.02 /.03 /.06 /.10 /.70.02 /.03 /.10 /.70 /.02 /.03 /.06 /.10 /.70 /.82.02 /.03 /.06 /.10 /.70 Note: Further informations about KWS door buffers can be found in our catalogue TEK_0102 11
Flush Pulls and Locks KWS Flush Pulls and Locks made of aluminium, brass and stainless steel 5250.. Ø 65 mm, for glass doors 8-13 mm 5251.. Ø 65 mm, for wooden doors 38-42 mm 5252../5253.. Ø 65 mm, for scewing/ gluing 5254.. Ø 65 mm, for glass doors 8-10 mm.41 /.42 /.62 /.66 /.41 /.42 /.22 /.35.22 /.35 5260.. 65 x 65 mm, for glass doors 8-13 mm 5001.. 70 x 200 mm 5004.. 100 x 200 mm 5013.. 70 x 70 mm 5016.. 90 x 90 mm 5061.. 170 x 170 mm 5062.. 170 x 170 mm.82.37 /.62 /.66 /.37 /.62 /.66 /.37 / 6128.. 6129.. 5072.. 183 x 244 mm 5207.. 90 x 200 mm 6101.. two- sided door operation 6128.. strike plate for welding on 6129.. strike plate for screwing on.82.02 /.03 /.06 /.10 /.70 /.31.32 /.37 /.06 /.06 / Note: Further informations about KWS flush pulls and locks can be found in our catalogue TEK_0506 Ordering example Piece Part no. Finish no... Piece 5250.82 12
Door Pulls, Door Knobs and House Numbers KWS Escutcheons, Door Pulls, Door Handles and Door Bells made of aluminium and stainless steel 3462.. sliding escutcheon with anti pull protection.22 /.82 3460.. sliding escutcheon with anti pull protection.22 /.82 3461.. sliding escutcheon with anti pull protection.22 /.82 3810.82 (0) 3811.82 (1) 3812.82 (2) 3813.82 (3) 3814.82 (4) font regular 3815.82 (5) 3816.82 (6) 3817.82 (7) 3818.82 (8) 3819.82 (9) 381A.82 381B.82 381C.82 381D.82 381E.82 (A) (B) (C) (D) (E).82 3A.. on round or oval escutcheon 3B.. on round or oval escutcheon 3C.. on round or oval escutcheon 3L.. on oval escutcheon 3M.. on oval escutcheon 3951.. bell plate 3H.. on round or oval escutcheon 3K.. on round or oval escutcheon Note: Further information abour KWS escutcheons, KWS door pulls, KWS door knobs and KWS door bells can be found in our catalogue TEK_0308 Ordering example Piece Part no. Finish no... Piece 3460.82 13
Door Handle Fixing Door Handle Fixings KWS pair fixing (series WS/WS2/WS4) 8A10.. P 10 stainless steel brushed.82 brushed (with 2 cap nuts).87 KWS single fixing (series WS/WS2/WS4) 8A71.. S 21 - M 6 stainless steel brushed.82 KWS single fixing (series WS/WS2/WS4) (for aluminium, plastic and wooden doors) 8B74.. S 24 - M 8 stainless steel brushed.82 brushed.87 KWS single fixing (series WS/WS2/WS4) (for aluminium, plastic and wooden doors) 8B77.. S 27 - M 8 stainless steel brushed.82 KWS pair fixing (series RS/KS) 8B03.. P 3 - M 8 stainless steel untreated surface.80 KWS pair fixing (series RS) (purpose built for wooden and glass doors) 8B04.. P 4 - M 8 stainless steel escutcheons brushed.82 KWS single fixing (series RS) 8B51.. S 1 - M 8 stainless steel escutcheons brushed.82 Ordering example Ordering example Set Part no. Finish no.... Set 8A10.82 14
Finishes Chart Short symbols for the of aluminium Material aluminium anodisable surface treatment subsequently anodised and compacted ground-brush-finished ground-polished chemically polished short symbol E4 E5 E6 1 effect on surface damage (marks- slight damage) 2 structure and appearance 1 up to completely removed 2 evenly dull bright 1 up to completely removed 2 smooth and highly brilliant to reflecting 1 partly to mostly set off 2 variation option from dull to matt gleaming Finish Codes raw steel, untreated surface.01 silver stove enamelled.02 black stove enamelled.03 gold stove enamelled.04 electro-galvanised.06 hot galvanised.07 dark bronze stove enamelled.10 special stove enamelled finish.19 Aluminium E4 natural finish, surface untreated.20 ground and brushed.21 KWS 1 silver anodised.22 KWS 2 nickel silver anodised.23 KWS 3 gold anodised.24 special anodised colour.26 KWS 4 light bronze anodised.27 KWS 5 dark bronze anodised.28 KWS 6 black anodised.29 Aluminium E5 natural finish, surface untreated.30 KWS 1 silver anodised.31 KWS 2 nickel silver anodised.32 KWS 3 gold anodised.33 brushed stainless steel effect anodised.35 KWS 4 light bronze anodised.36 KWS 5 dark bronze anodised.37 KWS 6 black anodised.38 special anodised colour.39 Brass natural finish.60 brushed and waxed.61 brushed and lacquered.62 nickel plated.63 polished and waxed.65 polished and lacquered.66 Plastic Coated Colours.70 golden yellow RAL 1004 flame red RAL 3000 ruby red RAL 3003 wine red RAL 3005 sapphire blue (.75) RAL 5003 brilliant blue RAL 5007 azure blue RAL 5009 leaf green RAL 6002 moss green RAL 6005 olive drab RAL 6022 stone grey RAL 7030 sepia brown RAL 8014 mahagoni brown RAL 8016 dark brown(.74) RAL 8077 grey white RAL 9002 pure white (.71) RAL 9010 graphite black (.73) RAL 9011 traffic white (.72) RAL 9016 other RAL colours on request Plastic coated colours steel glimmer, dark grey DB703 Stainless Steel stainless steel V2A nature finish stainless steel V2A ground and brushed stainless steel V2A ground and polished stainless steel V2A finely turned stainless steel V4A nature finished stainless steel V4A ground and brushed stainless steel V4A ground and polished.80.82.83.84.85.87.88 Plastic / Rubber PVC.95 rubber.96 Timber finished by crude brushed.51. varnished.52. Timber species maple.1 beech.2 ash-tree.3 walnut.4 Aluminium E6 chemically stained.40 KWS 1 silver anodised.41 KWS 2 nickel silver anodised.42 KWS 3 gold anodised.43 KWS 4 light bronze anodised.46 KWS 5 dark bronze anodised.47 KWS 6 black anodised.48 special anodised colour.49 15
HELM Range TEH_01 Hardware for Sliding Wardrobe Doors TEH_02H Hardware for Sliding Doors (Timber) TEH_02G Hardware for Sliding Doors (Glass) TEH_02D TEH_06 TEH_09 TEH_11 TEH_12 TEH_40 Hardware for Sliding Doors (Timber and Glass) Hardware for Sliding Gates Hardware for Gateway Gates Hardware for Curtains and Tarpaulins Safety Equipment against Falls from a Height (PSE) Hardware for Sliding Shutters KWS Range TEK_0102 Door Holders and Door Stops TEK_0308 Pull Handles, Door Handles and Accessories TEK_0506 Flush Handles and Locks TEK_0407 Hardware for Handrails, Floor Rails, Coat Racks and Toilet Partition Walls Code with link to download the brochure BEK_TB The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission. Part no.: This brochure supersedes all previous brochures.g. Woelm GmbH Hasselbecker Str. 2-4 D - 42579 Heiligenhaus Tel.: + 49 (0) 20 56-18 - 0 Fax: + 49 (0) 20 56-18 - 21 www.woelm.de contact@woelm.de Woelm Austria GmbH Seewalchen 5a A - 5201 Seekirchen Tel.: + 43 (0) 62 12-25 02 Fax: + 43 (0) 62 12-69 95 www.woelm.at contact@woelm.at