PROGRAMME CALENDAR 2016
2016 P R O G R A M M E C A L E N D A R This brochure contains details of our course schedules for 2016. While every effort has been made to avoid schedule changes in the compilation of this brochure, it is however, possible that some alterations may occur in the course of the year. In view of the above, all changes will be announced on the Gennesaret Website: www.gennesaretresources.com and through our regular mailings and advertisement.
ABOUT US Gennesaret Resources Nigeria Limited (GRNL) is a company formed in the year 2006; the company is wholly indigenous and maintains a good relationship with its technical support firms abroad. It was formed by professionals well experienced in Oil and Gas operations with a cumulative experience of over twenty years. Gennesaret Resources has carried out many services including NDT inspection of piping systems, tanks and pressure vessels; OCTG/BHA inspection; procurement of oil and gas equipment; HSE consultancy; Manpower supply; training and Certification. We are accredited by NEBOSH with accreditation number 953 and Licensed by IOSH. We are in partnership with Quality Control Company (QCCO), Egypt, the only Accredited examination center of ASNT in Africa to deliver ASNT NDT III and AWS certifications, OES Oilfield Services Ltd, UK for Rope Access and Lifting Gear inspection. We have membership with local and international organizations like: Oil & Gas Trainers Association of Nigeria (OGTAN), Pipeline Professionals Association of Nigeria (PLAN), Nigerian Institute of Welding (NIW), Dun & Bradstreet Global Database and America Society of Non-Destructive Testing (ASNT). We maintain a professional work force that can be deployed as soon as the need arises. We have trained over 1,500 youths across Nigeria on technical skills acquisition and we can do same for the following category: 1. Federal Government 2. State Government and 3. Local Government 4. Corporate Organisations
OUR VISION At Gennesaret, our vision is to be the industry leader admired by all for its quality service delivery, passion for excellence and promotion of local content OUR MISSION Our mission is to collaborate with world-class firms to design, develop and deliver high impact technical services and training programs and a wide range of consultancy services that produce outstanding human performance in organizations. OUR EMPLOYEE Gennesaret Resources maintain a high level of professionalism in staffing, ranging from local to foreign employees, with great strength in our technical abilities, we value our staff welfare, we attract and maintain talented and experienced employees. Our management pattern evolves with modern trend to suit our drive for excellence and clients needs. With innovative approach, our watch word is satisfaction in service delivery to clients. You may choose one of these options to register for an open seminar: 1. Send an email to us at info@gennesaretresources.com indicating the full name(s), email address of the participant, company name (if applicable) and mobile number. 2. Register online at www.gennesaretresources.com 3. Call us on 08034012002, 07042833378 PAYMENT Fees stated cover tuition, course materials and meals. Payment should be made before the commencement of the programme. Bookings are confirmed only with the payment of the fees. All Payment can be made via cheques or online transfer to the GRNL account. All cheques should be written in favour of Gennesaret Resources Nigeria Limited 4 ReGISTRATION Prior registration is mandatory to secure a place in the course the participant wish to attend and receive the joining instructions and other materials that may be sent ahead of the seminar start dates.
CONTENTS ABOUT GENNESARET RESOURCES NIGERIA LIMITED HEALTH, SAFETY AND ENVIRONMENT (HSE) National Examination Board on Occupation Safety and Health (NEBOSH) 7 The Institution of Occupational Safety and Health (IOSH) 8 QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) American Society for Non-Destructive Testing (NDT II & III) 10 API Individual Certification Programmes 11 American Welding Society (AWS) 14 Practical Welding Training 15 International Standard Certifications (ISO) 16
HEALTH, SAFETY AND ENVIRONMENT (HSE)
7 2016 TRAINING BROCHURE National Examination Board on Occupational Safety and Health HEALTH, SAFETY AND ENVIRONMENT (HSE) NEBOSH International General Certificate (IGC) The NEBOSH International General Certificate (IGC) covers the principles relating to health and safety, identification and control of workplace hazards and the practical application of this knowledge. The IGC syllabus takes a risk management approach based on best practice and international standards, such as the International Labor Organization (ILO) codes of practice. Local laws and cultural factors may form part of the study program where relevant and appropriate. NEBOSH IOGC The NEBOSH International Technical Certificate in Oil and Gas Operational Safety (IOGC) is designed specifically for those tasked with safety responsibilities in the oil and gas industry as part of their daily schedules. NEBOSH Diploma The NEBOSH International Diploma is the premier qualification specifically designed for health and safety professionals operating outside of the UK. The International Diploma builds directly on the knowledge gained in the NEBOSH International General Certificate and is at an advanced level for those who want to become authorities in Health and Safety. This course is deal for managers, supervisors, Courses NEBOSH International General Certificate (IGC) NEBOSH International Oil and Gas Certificate (IOGC) NEBOSH International Diploma Duration 11 days 6 days Fee (N) 250,000 210,000 Course Outline INEBOSH IGC) IGC1: Management of International Health and Safety Foundations in health and safety Health and safety management systems Policy Health and safety management systems Organizing Health and safety management systems Planning Health and safety management systems - Measuring, Audit and Review IGC2: Control of Workplace Hazards Workplace hazards and risk control Transport hazards and risk control Musculoskeletal hazards and risk control Work equipment hazards and risk control Electrical safety Fire safety Chemical and biological health hazards and risk control Physical and psychological health hazards and risk control Course Outline (NEBOSH IOGC) IOG1: Management of international oil and gas operational safety - Health, safety and environmental management in Context - Hydrocarbon process safety 1 - Hydrocarbon process safety 2 - Fire protection and emergency response - Logistics and transport operations Course Date: Training: 1st - 11th March, 2016 Exam: 14th March, 2016 Venue: Port Harcourt Training: 14th - 24th March, 2016 Exam: 28th March, 2016 Venue: Warri Training: 7th - 18th March, 2016 Exam: 21st March, 2016 Venue: Lagos employee representatives, Health and Safety advisers and for those who want to pursue a IGC3: Health and safety practical application Health and safety practical application career in health and safety
2016 TRAINING BROCHURE The Institution of Occupational Safety and Health (IOSH) 8 IOSH Working Safely The IOSH Working Safely course provides grounding in the essentials of health and safety. Everyone at work should have an understanding of why they must work safely and this course offers exactly that. It introduces a new approach to health and safety training by the use of state of the art animation and interactive exercises. It provides a basic introduction for all levels of personnel who are non-health and safety specialists. The training will give employees the information they need to keep themselves safe at work. Course Outlin (IOSH Working Safely): Introducing working safely Defining hazard and risk Identifying common hazards Improving safety performance Protecting our environment IOSH Managing Safely IOSH Managing Safely is a broad-based qualification for people who have to manage safety as an integral part of their managing or supervisory roles in the workplace. It is not intended to qualify delegates for specific safety roles, but to give them a good grounding in the basics of how to manage health and safety issues in the workplace and within teams. Course Outline (IOSH Managing Safely) Principles of accident prevention Common and statute law Health and safety management systems Risk assessment techniques and control Measures Workplace hazards Fire, electricity, COSHH, noise, work equipment Accident causation and investigation Audit and review Courses IOSH Working Safely IOSH Managing Safely Fee(N) 40,000 100,000 Duration 1 day 4 days This course is deal for managers, supervisors, employee representatives, Health and Safety advisers and for those who want to pursue a career in health and safety Course Date: Training: 24th - 24th Feb. 2016 Venue: Port Harcourt Training: 15th - 18th Feb. 2016 Venue: Warri Training: 8th - 11th Feb. 2016 Venue: Lagos HEALTH, SAFETY AND ENVIRONMENT (HSE)
QUALITY ASSURANCE AND QUALITY CONTROL (QA/QC)
0 2016 TRAINING BROCHURE American Society for Non-Destructive Testing (ASNT - NDT II) QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) ASNT NDT Level II This training is approached modularly and based on the ASNT II Recommended Practice No. SNT-TC-1A with strict reference to best practice reference guidelines and or standards. Each NDT method constitutes theoretical and practical lessons on non-destructive examination. At Gennesaret Resources, we are able to provide the NDT student with a specialized purposeful education that offers the widest choice of NDT training available. The combination of practical experience and the theory rich knowledge of our certified NDT instructors strikes the perfect hands-on balanced training experience. This course is designed for employers, NDT Level II & III Inspectors, Auditors, Supervisors, Engineers, QA/QC Personnel, Technicians, SSCE Holders, Graduates, NYSC members and others who desire to improve their skills in the area of NDT and inspection of Oil and Gas facilities. Courses Visual Testing (VT) Magnetic Particle Inspection (MPI) Penetrant Testing (PT) Duration 2 days 2 days 2 days Level II Fee (N) ASNT NDT Level III Universally, ASNT NDT Level III is the most recognised NDT certification. As such, it builds on ASNT NDT Level II to equip professionals with the knowledge on underlying technical principles that guide NDT. Consequently, they acquire the skills to establish techniques, interpret standards and prepare and approve procedures. Ultimately, this puts them in charge of training, qualification and certification of NDT Level I and Level II technicians in an organization. The course is ideal for supervisors and lecturers. Level III Fee (N) Basic 300,000 63,000 63,000 63,000 300,000 300,000 300,000 Port Harcourt Magnetic Particle Inspection 16th - 17th Feb. 2016 (MPI) Ultrasonic Testing (UT) Magnetic Particle Inspection (MPI) Radiographic Film Interpretation (RFI) Warri Lagos Magnetic Particle Inspection (MPI) 18th - 23rd Feb. 2016 1st - 2nd Feb. 2016 3rd - 8th Feb. 2016 16th - 17th Feb. 2016 Penetrant Testing (PT) 16th - 17th Feb. 2016 Ultrasonic Testing (UT) 16th - 17th Feb. 2016 Radiographic Film Interpretation (RFI) 3rd - 8th Feb. 2016 Ultrasonic Testing (UT) Radiographic Film Interpretation (RFI) 5 days 4 days 115,500 300,000 105,000 300,000
API Individual Certification Programme 2016 TRAINING BROCHURE 11 API Individual Certification Programmes are designed to promote self-regulation, health and safety, improved inspection capabilities, and improved management control and environmental performance. Certified inspectors are recognised as working professionals who are fully knowledgeable of industry inspection codes, and who are performing their jobs in accordance with those requirements. API s Individual Certification Programmes (ICP) are based on industry developed standards that are recognised and used with confidence worldwide. Individual Certification Programmes API 510 - Pressure Vessel Inspection API 570 - Piping Inspection API 571 - Advanced Corrosion & Materials API 580 - Advanced Risk Based Inspection API 653 - Above Ground Storage Tank Inspection Duration 6 days 6 days 4 days 4 days 6 days API 510 - Pressure Vessel Inspection The main emphasis of this programme is on improving and ensuring safety through the use of owner/user or third-party inspectors specialized in pressure equipment in a manner that protects employees, the public, and the environment. It provides the oil, gas and petrochemical industry with the assurance that pressure vessel inspectors trained and certified under this internationally recognized programme have the required knowledge and experience for the job in the field. Course participants aspiring to be certified by American Petroleum Institute will undergo a rigorous programme to get them well versed with the various code books and standards, including API Standards that cover maintenance, inspection, rating, repair and alteration of pressure vessels. Course Outlines Terminology Overview: API-510, Pressure Vessel Inspection Code - Introduction - Scope and General Information - Design - Deterioration and Failure Modes - Inspection Methods - Case Studies in Pressure Vessel Failures - Periodic Inspection Requirements Inspection, Repair, Alteration and Reconstruction Welding Metallurgy: Brittle Fracture Guide for Inspection of Refinery Equipment, API-571 & 575 ASME Section V ASME Section VIII, Div. 1 Overview: ASME Section IX Report Writing Course Date: Training: 9th - 13th Feb. 2016 Venue: Port Harcourt Course Fee (Training Only): N250,000.00 Examination Fees are to be paid directly to API by individual candidates API 570 - Piping Inspection The main emphasis of this programme is on promoting safety and maintaining optimal performance through the use of inspectors specialised in process piping systems. It provides the oil, gas and petrochemical industry with the assurance that piping inspectors trained and certified under this internationally recognised programme have the required knowledge and experience for the job in the field. Course participants aspiring to be certified by American Petroleum Institute will undergo a rigorous programme to get them well versed with the various code books and standards, including API Standards that cover inspection, repair, alteration and rerating of in-service piping systems. QUALITY ASSURANCE/QUALTY CONTROL (QA/QC)
2 API Individual Certification Programme 2016 TRAINING BROCHURE QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) Course Outline (API 570) Terminology Overview: API-570, Piping System Inspection, Repair, Alteration and Rerating - Introduction - Scope and General Information - Design - Deterioration and Failure Modes - Inspection Methods - Case Studies in Piping System Failures - Periodic Inspection Requirements Inspection, Repair, Alteration and Reconstruction Welding Metallurgy: Corrosion Mechanisms Guide for Inspection of Refinery Equipment, API-571 & 574 ASME Section V API-1104 Overview: ASME Section IX Report Writing Summary API 571 - Advanced Corrosion & Materials Proper identification of damage mechanisms is important when implementing the API Inspection Codes (API 510, API 570, API 653) and conducting Risk Based Inspection (RBI) per API 580 and API 581. The objective of this program is to provide documented evidence of advanced knowledge and expertise in the area of Corrosion and Materials based on the information contained in API RP 571. This course is designed to: (1) Train individuals who are interested in obtaining the API 571 Inspector Certification. (2) Provide individuals with an advanced knowledge of how corrosion mechanisms drive RBI conclusions. Note: This does not register you for the API exam. If you have not already registrered for the API exam, you need to download an application from the API website (www.api.org/icp). Course Outlines (API 571) - Introduction to Damage Mechanisms - Types of Damages- Thinning, Cracking, Metallurgical, Mechanical damages - Common damage mechanisms encountered in Refining Industry - Brittle Fracture - Thermal Fatigue - Erosion/Erosion Corrosion - Mechanical Fatigue Course Date: Training: 4th - 9th April, 2016 - Atmospheric Corrosion Venue: Port Harcourt - Corrosion Under Insulation (CUI) - Cooling Water Corrosion Course Fee (Training Only): N250,000.00 - Boiler Water Condensate Corrosion Examination Fees are to be paid directly to API by - Sulfidation individual candidates Chloride Stress Corrosion Cracking (ClSCC) Corrosion Fatigue Caustic Stress Corrosion Cracking (Caustic Embrittlement) Wet H2S Damage (Blistering/HIC/SOHIC/SCC) High Temperature Hydrogen Attack (HTHA) Temper Embrittlement Microbiologically Induced Corrosion (MIC) Soil Corrosion Sulfuric Acid Corrosion Amine Corrosion High Temp H2/H2S Corrosion Hydrofuoric (HF) Acid Corrosion Other Damage Mechanisms in Refining Industry Inspection, Prevention and Mitigation Mock Examination and Feed back Course Date: **Available on Request Course Fee (Training Only): N150,000.00 Examination Fees are to be paid directly to API by individual candidates
13 2016 TRAINING BROCHURE API Individual Certification Programme API 580 - Advanced Risk Based Inspection The objective of this program is to provide inspectors with advanced (above the basic core API 510, 570 & 653 certifications) knowledge and skills in Risk-Based Inspection (RBI) based on the information contained in API RP 580. Note: This does not register you for the API exam. If you have not already registrered for the API exam, you need to download an application from the API website (www.api.org/icp). Course Outline Overview of Risk-Based Inspection Principles Introduction to API RP 580 Introduction to the 2nd Edition of API RP 581 Risk Determination & Inspection Planning Assessing Damage Mechanisms & Probability of Failure Assessing Consequences of Failure Assessing Various Risk Determinations Identifying, Understanding and Managing Risk Drivers Risk-Based Inspection Planning Financial Risk & Cost Benefit Analysis Reassessment & Updating Understanding Sensitivities of the Risk Models Course Date: **Available on Request Course Fee (Training Only): N150,000.00 Examination Fees are to be paid directly to API by individual candidates API 653 - Above Ground Storage Tank Inspection The main emphasis of this programme is on safe storage and material handling of petroleum products in a manner that protects employees, the public and the environment. It provides the oil, gas and petroleum industry with the assurance that storage tank inspectors trained and certified under this internationally recognized programme, have the required knowledge and experience for the job in the field. Course candidates aspiring to be certified by American Petroleum Institute will undergo a rigorous programme to get them well versed with the various code books and standards, including API Standards that cover inspection, repair, alteration and reconstruction of the aboveground storage tank. Course Outline Introduction Terminology Overview : API 650, Welded Steel Tanks for Oil Storage Overview : API 653, Tank Inspection, Repair, Alteration and Reconstruction Welding Metallurgy Brittle Fracture Overview : Guide for Inspection of Refinery Equipment Chapter 13 : Atmosphere Storage Tanks Overview : API 651 Cathodic Protection of Aboveground Petroleum Storage Tanks API 652 Lining of Aboveground Petroleum Storage Tanks API RP 2207 Preparing Tank Bottom For Hot Work API RP 2215 Safe Entry and Cleaning of Petroleum Storage Tanks Overview (as related to API 653 ) ASME Section V ASME Section VIII, Div 1 ASME Section IX Report Writing Summary Course Date: **Available on Request Course Fee (Training Only): N250,000.00 Examination Fees are to be paid directly to API by individual candidates QUALITY ASSURANCE/QUALITY CONTROL (QA/QC)
4 American Welding Society (AWS) 2016 TRAINING BROCHURE QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) The course will serve as a sound refresher in welding inspection, particularly for practicing welding inspectors and anyone aspiring to be an AWS-certified welding inspector. The main emphasis is on what a professional welding inspector should know in actual practice. Course participants will undergo a rigorous program to get them well versed with the codes/standards in use, the fundamentals of welding inspector, and actual hands-on examinations of weld replicas with various inspection tools. Courses Certified Welding Inspector (CWI) Senior Certified Welding Inspector (SCWI) For Whom - NDT L evel II and III Inspectors - NDT Specialists - Welding Inspectors - Auditors - Supervisors - Engineers - Quality Assurance/Quality Control Personnel - Others who wish to improve their skill in the area of NDT and Inspection work - Duration 9 days 9 days Fee (N) 450,000 Course Outline: The Welding Inspector Welding Inspector Responsibilities Safety Welding, Brazing and Cutting Processes Weld Geometry and Welding Terminology Welding and Nondestructive Examination Symbols Weldability, Welding Metallurgy and Welding Chemistry Destructive Testing Standards, Including Codes and Specifications Welding Procedure and Welder Qualification Weld and Base Metal Discontinuities Nondestructive Examination (NDE) Processes Inspection Reports/Contents and Formats Course Date: Training: 27th June - 4th July, 2016 Exam: 5th July, 2016 Venue: Port Harcourt Documents Required for AWS/CWI Exam Registration - Original Application filled by the applicant - Official letter of experience from present company - For Engineers or Scence Grads: 3 years experience - For Non-Engineers or High School Leavers: 5 years experience - Copy of University or minimum qualification Certificate
2016 TRAINING BROCHURE 15 Welding Training This is a hands-on course and is designed around the participants doing the actual welding during 90% of the class. The instructor will train each department in the proper techniques and procedure for placing beads. Lectures are stand up; hand-outs and pocket guides are provided along the way, as needed. Welders entering this course are placed in Shielded metal Arc Welding (SMAW) process. Course Beginners/Entry Level Welding Training (Filler Welding) Intermediate Level Welding Training (Plate Welding) Advanced Level Welding Training (Pipe Welding) This course is designed for school leavers, engineering graduates, NYSC Members and all who wish to pursue a career in Welding Duration 4 weeks 6 weeks 6 weeks Course Beginners/Entry Level Welding Training (Filler Welding) Intermediate Level Welding Training (Plate Welding) Advanced Level Welding Training (Pipe Welding) Fee (N) 100,000 150,000 170,000 Training Start Date: 18th Feb. 2016 QUALITY ASSURANCE/QUALTY CONTROL (QA/QC) Inspection
6 International Standard Certifications (ISO) 2016 TRAINING BROCHURE HEALTH, SAFETY AND ENVIRONMENT (HSE) International Standards make things work. They give world-class specifications for products, services and systems, to ensure quality, safety and efficiency. They are instrumental in facilititating international trade. ISO has published more than 19500 International Standards covering almost every industry, from technology, to food safety, to agriculture and healthcare. ISO International Standards impact everyone, everywhere. The courses offered by Gennesaret Resources include: 1. ISO 9001:2008 (QMS Lead Auditor) 2. ISO 14001:2004 (EMS Lead Auditor) 3. OHSAS 18001:2007 (OHS Lead Auditor) 4. ISO 9001:2008 (QMS Internal Auditor) 5. ISO 22000 (Food Safety Lead Auditor) 6. ISO 27001: ( I n f o r m a t i o n S e c u r i t y Management Lead Auditor) 7. ISO 50001: (Energy Management System Lead Auditor) 8. Document Control & QMS Documentation Course Outline (ISO 9001) Domain 1: Fundamental principles and concepts of Quality Domain 2: Quality Management System (QMS) Domain 3: Fundamental Audit Concepts and Principles Domain 4: Preparation of an ISO 9001 audit Domain 5: Conducting an ISO 9001 audit Domain 6: Closing an ISO 9001 audit Domain 7: Managing an ISO 9001 audit program Course Outline (OHSAS 18001 Lead Auditor) Domain 1: Fundamental principles and concepts of occupational health and safety Domain 2: Occupational Health and Safety Management System (OHSMS) Domain 3: Fundamental Audit Concepts and Principles Domain 4: Preparation of an OHSAS 18001 audit Domain 5: Conducting an OHSAS 18001 audit Domain 6: Closing an OHSAS 18001 audit Domain 7: Managing an OHSAS 18001 audit program Course Outline (1SO 14001 EMS Lead Auditor) Domain 1: Fundamental principles and concepts of Environmental Management System (EMS) Domain 2: Environmental Management System (EMS) Domain 3: Fundamental Audit Concepts and Principles Domain 4: Preparation of an ISO 14001 audit Domain 5: Conducting of an ISO 14001 audit Domain 6: Closing an ISO 14001 audit Domain 7: Managing an ISO 14001 audit program ISO 9001 (QMS Lead Auditor) 15th - 19th Feb. 2016 OHSAS 18001 (OHS Lead Auditor) Port Harcourt Lagos ISO 9001 (QMS Lead Auditor) OHSAS 18001 (OHS Lead Auditor) 22nd - 26th Feb. 2016 21st - 25th March, 2016 28th March - 1st April, 2016
Head Office 1st Floor, Izzi House, 315 Aba/PH Expressway, Beside UBA Bank, Rumuokwurusi, Port Harcourt, Rivers State, Nigeria. Contact Addresses Lagos Office 1st Floor, Robicon House, 2 Metal Box Road, Off ACME Road, Ogba, Ikeja, Lagos, Nigeria. Warri Office 2nd Floor, Temrit Place, 47 Hospital Road, Ekpan, Warri, Delta State, Nigeria. Call 08034012002, 07042388878 E-mail: info@gennesaretresources.com Website: www.gennesaretresources.com