Helping Our Customers Achieve Superior Results Power & Control Systems
Your one stop for power, control and drilling rig equipment Canrig s capabilities and experience as the original manufacturer of sophisticated drilling equipment uniquely positions us to provide control systems that allow for seamless integration and superior operation of all rig components. CANPOWER Power House CANPOWER provides AC based power distribution systems built from proven components and are designed for handling rough drilling applications. CANCONTROL Driller s Controls CANCONTROL is perfectly matched for AC rig equipment and AC power distribution systems and are designed to produce high performance results in the most demanding drilling environments.
Power & Control Sys CANPOWER Power House Canrig is committed to manufacturing safe and reliable systems that provide all the power and control required for electrical equipment on your drilling rig. The Canrig power house provides a high-quality solution for electric power distribution on land and offshore drilling rigs. In addition to PLC controlled VFD units, the Canrig power house includes all of the required power support components such as a main switchboard, generator control, motor control center, small power distributions and transformers to power up all of the electrical consumers on your rig. Each power house has a customized assembly due to differing rig equipment requirements. The system is designed with flexible PLC input/output that can be expanded to accommodate any size rig and may be easily assigned and configured for varying equipment requirements. The main components such as the generator control, main switchboard, and VFD units are field proven and driven by Canrig s own developed firmware for drilling which ensure a perfectly matched and highly reliable system with no interfaces to third-party equipment. All components are specially developed or selected for harsh drilling and environmental conditions. On request, a remote access client can be installed in the power house. In case of failure, a Canrig service technician can log into the system and rectify the problem, wherever the operation is based in the world, without any need to travel. FEATURES Modular design to match rig equipment needs Safe and reliable system Air or liquid cooled for higher power density compact size Backup onboard air conditioning Canrig s own development of VFD firmware Remote access capability Configurable for onshore or offshore rigs Available for range of arctic to desert environments Available for all rigs
tems CANCONTROL Driller s Controls Canrig is committed to manufacturing safe and reliable systems that provide high performance solutions for AC powered rigs in both the land and offshore drilling business. CANCONTROL works in conjunction with the power house producing a fully integrated system with PLC controlled VFD units. Features Flexible, expandable input/output for varying equipment control needs Rugged and reliable system Available optional high performance controls to maximize drilling performance Backup onboard air conditioning Canrig s own developed control code Remote access Configurable for either onshore or offshore rigs Available for both arctic and desert environments Controls for all major rig equipment Designed to stand up to mobile demands of transport and setup on location Benefits Device Level Ring (DLR) for fault tolerant network Modular, scalable system adapts to rig size and drilling requirements with remote input/output flexibility Reduces cable runs between driller s cabin and other rig systems Alarms and messaging for tools and systems improve decision-making, response time and safety with integrated interlocks The integration of Canrig s PLC software and the RigWatch Suite of wellsite data gathering systems allows the driller full operational control and local diagnostic capability from the driller s control chair BASE CONTROL SYSTEM FEATURES Canrig Commander Drawworks Control System Features Energy management overrides driller speed command when required for safe stops Overpull protection limits pull to operator specification Controlled minimum line tensioning to prevent line fouling (bird nesting) Anti-Collision System (Interlocks integrated for Canrig equipment)
Canrig Top Drive Control System Features Advanced top drive automation Automated Drill Floor Wrench Features Independent PLC control Provides integrated control system interlocks to prevent equipment damage Mud Pump Controls Interface for mud pumps Advanced Controls REVit Real-Time Stick Slip mitigation, Canrig s Soft Torque implementation ROCKIT PILOT allows the top drive PLC to take over toolface steering, providing predictable bearing offset corrections MYWELLS.COM brings data from an array of products together in one place to provide our customers with a Web-based view of their entire operation - Any data generated at the wellsite using RigWatch Instrumentation can be transmitted to mywells.com in real time RigWatch is the industry s only comprehensive rig monitoring system with the ability to consolidate drilling, PVT, MWD and mudlogging data and interface with Canrig s automated equipment - It allows wellsite personnel to have immediate access to data, improving the speed and accuracy of decision making - Instrumentation sensor requirements vary by rig equipment RigWatch ECM uses sensors on rig machinery to gather information that determines how well the equipment is performing and when it might be due for maintenance - RigWatch ECM improves rig reliability by monitoring and issuing alerts about the network health of the rig controls
General Information www.canrig.com Sales Information info@canrig.com Rigline 24/7 (866) 433-4345 Telephone +1 (281) 774-5600 Fax +1 (281) 774-5610 Postal Address Corporate Headquarters 8223 Willow Place Drive South Houston, TX 77070 USA 1504