List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations Assembly - Assembly with an item excluded from the PED Assembly - Assessment of the integration of assemblies CLAP number CLAP version Adopted by CLAP WGP number Adopted by WGP X095 1 15/03/2016 C-11 15/03/2016 X097 1 08/01/2016 C-13 08/01/2016 X096 1 15/03/2016 C-12 15/03/2016 Assembly - Boilers X091 1 08/01/2016 C-04 08/01/2016 Assembly - Classification of permanent joints X098 1 15/03/2016 C-15 15/03/2016 Assembly - Derogation of Article 3.2.3 X092 1 08/01/2016 C-05 08/01/2016 Assembly - Effect of the derogation in Article 3.2.3 X090 1 08/01/2016 C-03 08/01/2016 Assembly - Highest category applicable to a pressure equipment X099 1 15/03/2016 C-16 15/03/2016 Assembly - Hydrostatic pressure test X093 1 08/01/2016 C-06 08/01/2016 Assembly - Marking of pressure equipment making up an assembly X100 1 15/03/2016 C-18 15/03/2016 Classification - (non-suspended) solid blocks X078 1 08/01/2016 B-26 08/01/2016 Classification - Category of a hermetically sealed refrigeration compressor Classification - Classification of a pressuire equipment containing fluids not initially introduced (chemical reaction) Classification - Classification of pressure accessories X084 1 15/03/2016 B-34 15/03/2016 X079 1 15/03/2016 B-27 15/03/2016 X059 1 15/03/2016 B-01 15/03/2016 Classification - condensate trap X087 1 15/03/2016 B-37 15/03/2016 Classification - Equipments of low volume X012 1 08/01/2016 A-05 08/01/2016 Classification - Extinguishers and their constitutive parts Classification - Fluid containing a suspension of solid X071 1 08/01/2016 B-14 08/01/2016 X082 1 08/01/2016 B-30 08/01/2016 Classification - Generators with coolant X064 1 15/03/2016 B-06 15/03/2016 Classification - Heat exchanger X062 1 08/01/2016 B-04 08/01/2016 Classification - Joining of a pressure accessory and a safety accessory. X089 1 15/03/2016 B-40 15/03/2016 Classification - Maximum allowable temperature, TS X063 1 08/01/2016 B-05 08/01/2016 Classification - Maximum allowable temperature, TS X069 1 15/03/2016 B-12 15/03/2016 Classification - Notion of DN X060 1 15/03/2016 B-02 15/03/2016 Classification - Overheating X076 1 15/03/2016 B-22 15/03/2016 Classification - Piping classification X080 1 08/01/2016 B-28 08/01/2016 Classification - Piping with a double envelope X085 1 15/03/2016 B-35 15/03/2016
Classification - Pressure accessories X074 1 08/01/2016 B-17 08/01/2016 Classification - Pressure gauges X013 1 08/01/2016 A-06 08/01/2016 Classification - Pressure regulators X073 1 15/03/2016 B-16 15/03/2016 Classification - Super-heated water X061 1 15/03/2016 B-03 15/03/2016 Classification - Use Article 3.1 to determine the Table in Annex II Classification - Vessels containing two different fluids. Classification - Vessels containing two phases, one liquid and one gaseous Classification - Vessels for the storage of sanitary hot water X070 1 08/01/2016 B-13 08/01/2016 X066 1 08/01/2016 B-09 08/01/2016 X067 1 08/01/2016 B-10 08/01/2016 X065 1 15/03/2016 B-08 15/03/2016 Classification of fluids X003 1 11/03/2015 B-41 11/03/2015 Conformity assessment - Application of a module from a higher category X068 1 15/03/2016 B-11 15/03/2016 Conformity assessment - Components X109 1 15/03/2016 D-09 15/03/2016 Conformity assessment - Conformity assessment Equipment for domestic use - CE marking Conformity assessment - Delegation of the proof test X179 1 15/03/2016 H-19 15/03/2016 X113 1 08/01/2016 D-13 08/01/2016 Conformity assessment - Design and manufacturing X110 1 08/01/2016 D-10 08/01/2016 Conformity assessment - Design approval under module G Conformity assessment - Different modules for an assembly Conformity assessment - Different modules for an equipment with sub-contracted part Conformity assessment - Documents to be given for the final inspection Conformity assessment - Evaluation of a pressure equipment making up an assembly Conformity assessment - Expiry date of QA certification Conformity assessment - Notified body in function of the modules X103 1 15/03/2016 D-01 15/03/2016 X107 1 15/03/2016 D-06 15/03/2016 X105 1 15/03/2016 D-03 15/03/2016 X124 1 08/01/2016 F-02 08/01/2016 X094 1 15/03/2016 C-07 15/03/2016 X114 1 15/03/2016 D-15 15/03/2016 X106 1 15/03/2016 D-04 15/03/2016 Conformity assessment - Operating instructions X108 1 15/03/2016 D-07 15/03/2016 Conformity assessment - Pressure cookers X072 1 15/03/2016 B-15 15/03/2016 Conformity assessment - Pressure equipment covered by article 3 3 X075 1 08/01/2016 B-18 08/01/2016 Conformity assessment - Scope of products X112 1 08/01/2016 D-12 08/01/2016 Conformity assessment - Taking into account the ISO 9001 certification X104 1 08/01/2016 D-02 08/01/2016 Conformity assessment - User inspectorate X194 1 15/03/2016 I-15 15/03/2016 Conformity assessment procedures based on directive 2014/68/EU for assembly including equipment placed on the market according 9G- 23/EC X007 1 24/06/2015 Definition of fluid X002 1 11/03/2015 A-24 11/03/2015 Definition of unstable gas X004 1 11/03/2015 B-21 11/03/2015 Equipement concerned by Dangerous Goods transports regulation X164 1 08/01/2016 G-29 08/01/2016
Equipment covered by the regulations on transport of dangerous goods ESR on design - Components - Experimental design method ESR on design - Conditions of application of an experimental design method without calculation ESR on design - Determination of the maximum allowable pressure X001 1 11/03/2015 A-54 11/03/2015 X120 1 15/03/2016 E-07 15/03/2016 X115 1 15/03/2016 E-01 15/03/2016 X169 1 15/03/2016 H-07 15/03/2016 ESR on design - Experimental design method X118 1 15/03/2016 E-05 15/03/2016 ESR on design - Pressure limiting devices X116 1 15/03/2016 E-02 15/03/2016 ESR on design - Pressure limiting devices - short duration X122 1 15/03/2016 E-09 15/03/2016 ESR on design - Protective device X119 1 15/03/2016 E-06 15/03/2016 ESR on design - Self-diagnosis of safety accessories X121 1 08/01/2016 E-08 08/01/2016 ESR on manufacturing - Accreditation of manufacturer's testing laboratory for NDT or DT ESR on manufacturing - Approach for the approval of permanent joining procedures ESR on manufacturing - Approach for the approval of personnel in charge of permanent joining X131 1 15/03/2016 F-09 15/03/2016 X132 1 15/03/2016 F-11 15/03/2016 X128 1 15/03/2016 F-06 15/03/2016 ESR on manufacturing - Approbation of NDT personnel ESR on manufacturing - Approval of permanent joining procedures and personnel ESR on manufacturing - CE marking of pressure accessories and safety accessories of small dimensions ESR on manufacturing - Essential maximum/minimum allowable limits ESR on manufacturing - Final assessment of pressure equipment ESR on manufacturing - Format for marking the year of manufacture of pressure cookers X134 1 15/03/2016 F-13 15/03/2016 X133 1 08/01/2016 F-12 08/01/2016 X173 1 15/03/2016 H-13 15/03/2016 X172 1 15/03/2016 H-12 15/03/2016 X166 1 15/03/2016 H-02 15/03/2016 X171 1 15/03/2016 H-10 15/03/2016 ESR on manufacturing - Forming procedures X125 1 15/03/2016 F-03 15/03/2016 ESR on manufacturing - Harmonized standards for permanent joining X130 1 15/03/2016 F-08 15/03/2016 ESR on manufacturing - Individual serial number X170 1 15/03/2016 H-09 15/03/2016 ESR on manufacturing - Information required by a Member State ESR on manufacturing - Marking and labelling on a sticker ESR on manufacturing - Marking of bursting disc safety device X200 1 08/01/2016 I-21 08/01/2016 X177 1 H-17 X111 1 15/03/2016 D-11 15/03/2016 ESR on manufacturing - Modification X101 1 15/03/2016 C-19 15/03/2016 ESR on manufacturing - Permanent joints X127 1 15/03/2016 F-05 15/03/2016 ESR on manufacturing - Piping part of an industrial installation X187 1 08/01/2016 I-08 08/01/2016 ESR on manufacturing - Pressure test X176 1 08/01/2016 H-16 08/01/2016 ESR on manufacturing - Qualification of procedures of permanent joints ESR on manufacturing - Replacement after proof test X126 1 15/03/2016 F-04 15/03/2016 X137 1 15/03/2016 F-17 15/03/2016
ESR on manufacturing - Safety information given to the user ESR on manufacturing - Safety valve and proof test for pressure containment aspect ESR on manufacturing - Temporary device for manufacturing ESR on manufacturing - Third party witness for the whole permanent joining and testing process X167 1 15/03/2016 H-03 15/03/2016 X174 1 15/03/2016 H-14 15/03/2016 X136 1 15/03/2016 F-16 15/03/2016 X123 1 08/01/2016 F-01 08/01/2016 ESR on manufacturing - Visual examination X129 1 08/01/2016 F-07 08/01/2016 ESR on manufacturing - Welded tubes X160 1 15/03/2016 G-25 15/03/2016 ESR on manufacturing - Welding on a pressure bearing component ESR on materials - Approval of a material manufacturer ESR on materials - Bending rupture for materials with low thickness X135 1 08/01/2016 F-14 08/01/2016 X182 1 15/03/2016 I-03 15/03/2016 X163 1 15/03/2016 G-28 15/03/2016 ESR on materials - Bolting parts X144 1 08/01/2016 G-08 08/01/2016 ESR on materials - Certification of the quality (assurance) systems of material manufacturers X139 1 08/01/2016 G-02 08/01/2016 ESR on materials - Component parts of pressure equipment ESR on materials - Conformity according a specification X155 1 08/01/2016 G-19 08/01/2016 X165 1 08/01/2016 G-30 08/01/2016 ESR on materials - Criteria for steel ductility X157 1 15/03/2016 G-22 15/03/2016 ESR on materials - Documentation and traceability of welding consumables ESR on materials - European Approval for Materials - Type of material X146 1 08/01/2016 G-10 08/01/2016 X161 1 15/03/2016 G-26 15/03/2016 ESR on materials - European Approval of Material X183 1 15/03/2016 I-04 15/03/2016 ESR on materials - Fine-grained steel X150 1 15/03/2016 G-14 15/03/2016 ESR on materials - Gasket X158 1 15/03/2016 G-23 15/03/2016 ESR on materials - Harmonised standard X138 1 15/03/2016 G-01 15/03/2016 ESR on materials - Impact properties of a steel grade X153 1 08/01/2016 G-17 08/01/2016 ESR on materials - Inspection document X145 1 08/01/2016 G-09 08/01/2016 ESR on materials - Inspection documents X141 1 08/01/2016 G-05 08/01/2016 ESR on materials - Main pressure-bearing part X142 1 15/03/2016 G-06 15/03/2016 ESR on materials - Material recognised as being safe to use X181 1 15/03/2016 I-02 15/03/2016 ESR on materials - Particular appraisal for material X189 1 08/01/2016 I-10 08/01/2016 ESR on materials - Particular appraisal for materials recognized as being safe to use X190 1 15/03/2016 I-11 15/03/2016 ESR on materials - Particular Material Appraisal X156 1 15/03/2016 G-21 15/03/2016 ESR on materials - Particular material appraisal X192 1 08/01/2016 I-13 08/01/2016 ESR on materials - Particular material appraisal by a user inspectorate ESR on materials - Pressure equipment manufactured from plastic, GRP and other non metallic materials ESR on materials - Quantitative values of section 7.5 X193 1 08/01/2016 I-14 08/01/2016 X147 1 15/03/2016 G-11 15/03/2016 X149 1 15/03/2016 G-13 15/03/2016
ESR on materials - Requirements on materials X154 1 15/03/2016 G-18 15/03/2016 ESR on materials - Sound engineering practice X191 1 08/01/2016 I-12 08/01/2016 ESR on materials - Specific assessment of material manufacturer ESR on materials - Specific assessment of material producers X143 1 15/03/2016 G-07 15/03/2016 X152 1 08/01/2016 G-16 08/01/2016 ESR on materials - Traceability X140 1 08/01/2016 G-04 08/01/2016 ESR on materials - Traceability of 3.1 certificate and associated documentation ESR on materials - Use of materials which comply with harmonized standards ESR on materials - Welding materials and other permanent joining materials X162 1 15/03/2016 G-27 15/03/2016 X151 1 15/03/2016 G-15 15/03/2016 X148 1 15/03/2016 G-12 15/03/2016 ESR particular - an equivalent overall level of safety X168 1 08/01/2016 H-06 08/01/2016 ESR particular - Boilers for generating steam or superheated water intended for operation without continuous supervision X175 1 08/01/2016 H-15 08/01/2016 ESR particular - Leakage for pressure equipment X117 1 15/03/2016 E-03 15/03/2016 ESR particular - Material conforming to the specification Exclusion - Assembly classified as no higher than category I Exclusion - Boilers and pressure vessels classified in category I and installed in a machinery X159 1 08/01/2016 G-24 08/01/2016 X042 1 15/03/2016 A-39 15/03/2016 X030 1 15/03/2016 A-26 15/03/2016 Exclusion - District heating pipelines X024 1 15/03/2016 A-18 15/03/2016 Exclusion - Equipment in relation to the well-control equipment Exclusion - Gas cylinders to be used for fixed fire extinguishing installations X040 1 15/03/2016 A-37 15/03/2016 X039 1 15/03/2016 A-36 15/03/2016 Exclusion - High-voltage X053 1 08/01/2016 A-51 08/01/2016 Exclusion - Hot blast stoves X086 1 15/03/2016 B-36 15/03/2016 Exclusion - Interpretation of the exclusion of article 1 3.10 X017 1 08/01/2016 A-11 08/01/2016 Exclusion - Mobile offshore unit X031 1 15/03/2016 A-27 15/03/2016 Exclusion - Networks for the supply, distribution and discharge of water and associated equipment X022 1 15/03/2016 A-16 15/03/2016 Exclusion - Pipeline pressure reduction station X033 1 08/01/2016 A-29 08/01/2016 Exclusion - Pipeline stations X032 1 08/01/2016 A-28 08/01/2016 Exclusion - Silencers X088 1 15/03/2016 B-38 15/03/2016 New approach - Additional requirements in national regulations New approach - Application of the sound engineering practice (SEP) New approach - Boilers for generating steam or superheated water intended for operation without continuous supervision X203 1 15/03/2016 I-24 15/03/2016 X196 1 15/03/2016 I-17 15/03/2016 X199 1 15/03/2016 I-20 15/03/2016 New approach - CE declaration of conformity X195 1 15/03/2016 I-16 15/03/2016 New approach - Declaration of conformity of assemblies X206 1 08/01/2016 J-08 08/01/2016
New approach - Information of the Declaration of Conformity New approach - Information supplied for an item of pressure equipement which falls under sound engineering practice New approach - Inspections under national legislation before putting into service New approach - Language of the EC declaration of conformity New approach - National regulations and inspections periods New approach - Partial use of one or more documents New approach - Replacements, repairs or modifications X205 1 15/03/2016 J-06 15/03/2016 X198 1 15/03/2016 I-19 15/03/2016 X202 1 08/01/2016 I-23 08/01/2016 X201 1 15/03/2016 I-22 15/03/2016 X197 1 08/01/2016 I-18 08/01/2016 X185 1 15/03/2016 I-06 15/03/2016 X010 1 08/01/2016 A-03 08/01/2016 New approach - Sound engineering practice X188 1 15/03/2016 I-09 15/03/2016 New approach - Substantial modification X011 1 08/01/2016 A-04 08/01/2016 New approach - Use of another document than a harmonised standard X184 1 08/01/2016 I-05 08/01/2016 New approach - Used pressure equipment X204 1 15/03/2016 J-01 15/03/2016 Pressure and temperature to be marked on bottles for breathing apparatus PS determination of safety accessory like a valve, protecting equipment with different PS X178 1 15/03/2016 H-18 15/03/2016 X005 1 12/03/2015 Scope - Transportable pressure receptacle (TPED) X102 1 15/03/2016 C-20 15/03/2016 Scope - Accumulators for high-voltage electrical equipment Scope - Both the CE marking for the PED and the PI mark for the TPED X051 1 15/03/2016 A-49 15/03/2016 X034 1 15/03/2016 A-30 15/03/2016 Scope - Bottles for breathing equipment X016 1 08/01/2016 A-10 08/01/2016 Scope - Component parts of pressure equipment X027 1 08/01/2016 A-22 08/01/2016 Scope - Discharge piping of pressure safety accessories X045 1 08/01/2016 A-42 08/01/2016 Scope - Dryer rolls for paper industry X055 1 15/03/2016 A-53 15/03/2016 Scope - Electrical pressure cookers X054 1 15/03/2016 A-52 15/03/2016 Scope - Engine powered fork lift truck X044 1 15/03/2016 A-41 15/03/2016 Scope - Flame Arresters and flash back arresters X050 1 08/01/2016 A-48 08/01/2016 Scope - Flare tip at the end of piping X052 1 08/01/2016 A-50 08/01/2016 Scope - Heat exchanger X049 1 08/01/2016 A-47 08/01/2016 Scope - Hermetically sealed and semihermetic compressors X018 1 15/03/2016 A-12 15/03/2016 Scope - Hydraulic and pneumatic transmissions X025 1 08/01/2016 A-19 08/01/2016 Scope - Measuring or control system X026 1 08/01/2016 A-20 08/01/2016 Scope - NGV (Natural Gas Vehicles) filling stations X035 1 08/01/2016 A-31 08/01/2016 Scope - Operational function of a pressure accessory X021 1 15/03/2016 A-15 15/03/2016 Scope - Piping components X015 1 08/01/2016 A-09 08/01/2016 Scope - Piping in fire extinguishing systems X041 1 15/03/2016 A-38 15/03/2016 Scope - Portable extinguishers X008 1 08/01/2016 A-01 08/01/2016
Scope - Portable extinguishers X028 1 15/03/2016 A-23 15/03/2016 Scope - Pressure accessory X014 1 08/01/2016 A-08 08/01/2016 Scope - Pressure accessory X043 1 08/01/2016 A-40 08/01/2016 Scope - Pressure equipment intended for the functioning of vehicles X047 1 15/03/2016 A-45 15/03/2016 Scope - Pressure equipments installed on vehicles X048 1 15/03/2016 A-46 15/03/2016 Scope - Propellant gas cartridges for portable extinguishers X038 1 08/01/2016 A-35 08/01/2016 Scope - PS and explosion X057 1 08/01/2016 A-56 08/01/2016 Scope - Quick opening closure on a pressure vessel X083 1 15/03/2016 B-32 15/03/2016 Scope - Receptacles PI marked X036 1 15/03/2016 A-33 15/03/2016 Scope - Safety accessories X046 1 08/01/2016 A-43 08/01/2016 Scope - Safety accessories X186 1 15/03/2016 I-07 15/03/2016 Scope - Sensors used as part of a safety chain X029 1 08/01/2016 A-25 08/01/2016 Scope - Slurry tanker X037 1 15/03/2016 A-34 15/03/2016 Scope - Solar panel X077 1 15/03/2016 B-23 15/03/2016 Scope - Sound engineering practice X180 1 08/01/2016 I-01 08/01/2016 Scope - Standard pressure equipment X023 1 08/01/2016 A-17 08/01/2016 Scope - Tank used for transport by road or rail X009 1 08/01/2016 A-02 08/01/2016 Scope - Transport tanks X020 1 15/03/2016 A-14 15/03/2016 Scope - Turbine piping X056 1 15/03/2016 A-55 15/03/2016 Scope - Vacuum insulation of pressure vessels X019 1 15/03/2016 A-13 15/03/2016 Scope - Vacuum relief valve X081 1 08/01/2016 B-29 08/01/2016 Scope - Vessels under vaccum conditions X058 1 08/01/2016 A-57 08/01/2016 Technical reference's change during validity period of a type conformity X006 1 24/06/2015