T-WORKSTATION T-Workstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific structural environment. The desk s highly flexible table top frame offers a wide range of use options - together with a variety of base frame shapes and easy to assemble. T-Workstation desk offer a virtually limitless range of combinations and are responsive to organisational change.
PRODUCT DESCRIPTION PRODUCT DESCRIPTION 2 Table top: Three board thickness are available: 3 mm compact top, 9 mm, or 25 mm chipboard Edge (circumferential): Chipboard 9 mm: 2 mm mono-edge, 2mm duo-edge, or 3 mm mono-edge. Chipboard 25 mm: 2 mm mono-edge or 3 mono-edge. 2 3 Frame: 4-leg rectangular pipe, 4-leg round pipe, Delta, Delta wood, Slope, C-leg, T-leg, skid slab-end, full slab-end. 3 7 0 2 4 6 3 5 2 9 2 3 4 5 6 7 8 9 0 2 3 Table top Frame Slab-end Cable tray Handle and retainer for sliding top Universal adapter Plate connector Diecast- clamps Table top clip Plug box Cable support arm foldable cable tray Cable support arm fixed cable tray Table top slot 8 3 2
OVERVIEW AND DIMENSIONS OVERVIEW AND DIMENSIONS DESKTOP SHAPE TG BASIC DESK Rectangle RE Rectangular RE with Soft Edge Straight and sloped on user side S2-2.400-2.400.400-2.400 900 900 Sloped and rounded on user side SG.400-2.400 Rounded on user side NG Angled at 50 on user side W Angled at 35 on user side W2 900.400-2.400.200.422 667.3.400.200 667.622.3. Equal-sided 20 angle desk W3 Combination desk K Desk combination K3.93.293.200.200.200.200. - 2.400. - 2.400. -.. -. Connection board VP.200.200 Worktables with full slab-end, C-leg and T-leg possible with a maximal nominal width of 2.000 mm Dimensions in mm 3
OVERVIEW AND DIMENSIONS OVERVIEW AND DIMENSIONS DESK TOP SHAPES COMMUNICATION SEGMENTS TC Visitor s side rectangular AE Lateral over table rectangular MV Lateral over table rounded MU -.599. - 2.400 400 400 400 400 400 400 400 400 300 Visitor side rounded AR 900 900 -.599. - 2.400 300 900 900 Lateral over 2 tables rectangular ME Lateral over 2 tables rounded MR Lateral round MH 400 400 400 400 400 400 400 400 Laterally sloped MS 900 900 900 900 900 900 900 900.200.400.500 900. 900 DESKTOP SHAPES DESK EXTENSION TA Further installation desk RE Side desk RE - 2.400 900-2.400 900 KEY Column position Extension dimension Wooden structure direction Slab-end position Support leg position.200.200 Leg length Worktables with full slab-end, C-leg and T-leg possible with a maximal nominal width of 2.000 mm Dimensions in mm 4
LATERAL DEFINITION AND DIRECTION OF TOP SHAPE LATERAL DEFINITION AND DIRECTION OF TOP SHAPE LATERAL DEFINITION AND DIRECTION OF TOP SHAPE RE, NG NS, S, S2, SG Visitor side (V) Visitor side (V) Visitor side (V) left side (L) N right side (R) left side (L) L right side (R) left side (L) R right side (R) User side (U) User side (U) User side (U) W, W2, K, K3, VP W3 Visitor side (V) Visitor side L lateral (S) laterally (VS) User side (U) front (F) Visitor side (V) R User side (U) front (F) Visitor side laterally (VS) Visitor's side left (VL) left side (L) N User side (U) Visitor's side right (VR) right side (R) CONNECTION POSITION AND DIRECTION OF TOP SHAPE RE AE, MH, MV, MU ME, MR L TA L TG R R TA L TA N TG TA L TG TG R TA TA N... Neutral L...Left R... Right 5
FRAME VERSIONS FRAME VERSIONS The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 9 mm chipboard and 3 mm compact top, the desk height is reduced accordingly. 740 650 200 850 4-LEG RECTANGULAR PIPE Rectangular pipe 60 x 30 mm, steel Range of height adjustment: fixed or in 20 mm grid with tool 740 650 200 850 4-LEG ROUND PIPE Round pipe Ø 60 mm, steel Range of height adjustment: in 20 mm grid with tool 740 SLOPE Free-form, die casting aluminium Range of height adjustment: 740 mm fixed 740 240 620 860 C-LEG Rectangular tube (aluminium profile) x 62 mm, cantilever leg made of aluminium die casting. Range of height adjustment: fixed or in 0 mm grid without tool 740 620 240 860 T-LEG Rectangular tube x 62 mm, aluminium die casting, aluminium profile Range of height adjustment: fixed or in 0 mm grid without tool not possible in combination with desktop shape rectangle RE with Soft Edge 6
FRAME VERSIONS FRAME VERSIONS 200 650 850 SKID SLAB-END Rectangular pipe 55 x 25 mm, steel Range of height adjustment: in 20 mm grid with tool 700 850 50 FULL SLAB-END Thickness of slab-end 4 mm, chipboard (for melamine), MDF (for veneer), fastening construction and cover plate made of steel Range of height adjustment: in 20 mm grid with tool 740 650 200 850 DELTA 2 Rectangular pipe 60 x 30 mm, steel Range of height adjustment: 740 mm fixed or height adjustable between 650-850 mm 740 DELTA WOOD 2 Wooden tube 57 x 53.5 mm, to steel pipe Range of height adjustment: 740 mm fixed.070 DELTA HIGH 2 Rectangular pipe 60 x 30 mm, steel Range of height adjustment:.070 mm fixed.070 DELTA WOOD HIGH 2 Wooden tube 57 x 53.5 mm, to steel pipe Range of height adjustment:.070 mm fixed not possible in combination with desktop shape rectangle RE with Soft Edge 2 not angled on user side 50 W 7
OPTIONS TABLE TOP OPTIONS TABLE TOP CABLE OUTLET Quick and easy to pass cabling through the table top. The outlet cover can be slip to one side so that the cable can pass though it. Cable outlet ø 80 mm -3 units per table top possible Positions specified as fixed per desktop shape Possible positions of the grommet hole RE, SG, NG S2 VP K K3 W W2 W3 PLUG BOX The plug box is milled flush into the table top and can be equipped with a connection plug board. Quick and easy access to the plug board is enabled by opening the aluminium flap. Plug box 35 x 25 mm unit per table top possible Position per desktop shape specified as fixed Position in the centre up to desk width of.400 mm Position left or right from desk width of. mm upwards Cannot be combined with sliding top and cable flap. Plug box and integral connection plug boards Cable and media management price list Possible positions of the plug box RE, SG, NG S2 K K3 W W2 W3 8
OPTIONS TABLE TOP OPTIONS TABLE TOP SLIDING TOP The sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch and thus allowing cable management access. Sliding information: 90 mm Only in combination with a cable tray. The sliding top cannot be used with a desk depth of mm. Combination with cable flap is not possible. Possible desk top shapes RE, SG, NG S2 CABLE FLAP Cable flaps allow for easy, ergonomically correct and quick access to cable management. Version possible as table top or variation. The cable flap is divided in the centre from a desk width of.40 mm upwards. Installation on universal adapters included. Cable flap depth 80 mm Only makes sense in connection with a cable tray. Combination with sliding top is not possible. If a shortened sliding top is selected, the depth of the cable flap is reduced by -3 mm. Possible positions for the cable flap RE, SG, NG S2 VP K K3 9
OPTIONS OPTIONS TABLE TOP SLOT T-Panel Multi can be installed in the table top slots. This is fitted ensuring that the rear side runs flush with the rear edge of the desk. The table top slot can also be used for quick and easy cabling through the table top. A part of the cover can be slid to one side to enable the cable to be passed though. 440 x 650 mm Positions specified as fixed per desktop shape 2 units up to a desk width of.400 mm (left and right) 3 units from a desk width of.40 mm (left, centre and right) upwards Cabling is no longer possible if a T-Panel has already been installed in the table top slot. Positions of the table top slots RE, SG, NG S2 VP K K3 W W2 W3 PREPARATION FOR CONNECTION TO T-PANEL (UNIVERSAL ADAPTER) The desk is automatically equipped with universal adapters in this process. This enables different elements to be connected. Universal adapter 2 units up to a desk width of.400 mm 3 units from a desk width of.40 mm upwards T-Panel Pure: behind desk top with gap or behind shortened desk top T-Panel Curve: behind desk top with gap or in top slot T-Panel Multi: behind desk top with gap or in top slot T-Panel cannot be connected using table top clamp. 0
OPTIONS OPTIONS CABLE TRAY The cable tray is aimed at providing virtually invisible cable management. Depending on the situation, a fixed or foldable cable tray can be selected. A fixed cable tray is the more obvious solution if the table top is movable or its design already includes a cable flap. With fixed tops, access to cable management is via a visitor's side foldable cable tray. Vertical cable routing can be done by means of cable chains which can be hooked in along the entire length of the cable tray. Foldable cable tray only possible up to a desk width of 999 mm. Fixed or foldable cable tray possible from a desk width of mm upwards, depending on requirement. Cable tray fixed for cable flap or sliding top Cable tray, foldable for fixed top Possible positions for the cable tray RE, SG, NG S2 VP K K3 W W2 W3 INSTALLATION OF CONNECTION PLUG BOARDS IN CABLE TRAYS Connection plug board brackets are required as follows, depending on the number and position of the connection plug boards: with fixed cable tray with foldable cable tray unit 2 units 2 units 4 units 3 units 3 units The cable tray brackets supplied can simultaneously be used as connection plug board brackets.
OPTIONS OPTIONS SUPPORTING PEDESTAL CONNECTION CT supporting pedestals can be attached to the T-Workstation desks by means of support mounts with heights of 548 mm (9 HE) and 598 mm (0 HE). In this process, the slab-end is left off on the pedestal side, although the length of the frame remains unchanged. The length of the cable tray also remains the same. A more obvious choice in connection with cable flap or sliding top. No top overlap is permitted on the pedestal side due to the danger of tipping. Modesty panels are only permitted on the rear edge and if the desk depth is greater than the pedestal depth. Possible positions of the supporting pedestal connection RE, SG, NG S2 VP K K3 W W2 W3 FIXED PEDESTAL CONNECTION The CT fixed pedestal with a height of 740 mm can be loosened from desks with height-adjustable or fixed-range height adjustment areas. Possible table depths for this are,, 900 and mm. With 900 and mm, the top of an mm deep pedestal can be extended backwards by means of an overlap of the top. The length of the frame remains unchanged.back-fitting deconstruction to holder is only possible in certain circumstances. No excess overlap of the top is possible on the connection side. Not possible for rectangle RE with Soft Edge. Possible positions of the fixed pedestal connection RE, SG, NG S2 VP K K3 W W2 W3 2
OPTIONS OPTIONS SIDEBOARD CONNECTION The sideboard is used as a frame replacement and is possible with a maximum of sideboard per desk. It is possible to form a connection with the sideboard from a desk width of. mm upwards. Insertion angle is always 90. The minimum width of the sideboard depends on the depth of the desk and amounts to.200 mm or. mm. The range of height adjustment in this regard only begins from 680 mm onwards. For reasons of stability and space, the sideboard is only permitted with the desktop shapes shown at the bottom. Possible positions of sideboard connection RE S2 SG NG COMMUNICATIONS SEGMENT Visitor's side assembly Material: Chipboard 9 /25 mm or compact top 3 mm. visitor's side rectangular Visitor s side assembly is undertaken using the universal adapters. T-Panel (universal adapter) preparation is therefore required. Assembly lateral over 2 desks Material: Chipboard 9 / 25 mm or compact top 3 mm. The communication segment is automatically equipped with support columns from a depth of 40 mm onwards. These are square for all slab-foot versions of the basic desk. Exception: in the case of 4-leg slab foot, the support columns of the communication segment cannot be selected in the round version. When a Delta frame is used, the maximum depth permitted is 400 mm. lateral rounded over 2 desks In the communication segment shown, the desks are arranged flush with no gap. When an RV dividing wall or panels between both desks are used, the width of the communication segment is automatically adjusted correspondingly. 3
INSPIRATIONS INSPIRATIONS Inspiration #0 T-Workstation Delta wood with a natural oak frame at a fixed height (740 mm). Table top of 9 mm thickness (of. x mm) with a Soft Edge in melamine white with a T-Panel Curve in Remix 933 (Green) fabric. Panel fitted with an organisation rail for steel trey short with natural oak wooden inserts. Inspiration #02 T-Workstation Delta with aluminium-coloured steel frame, height adjustable (650-850 mm) and with a 9 mm table top (of. x mm) in white melamine. Includes a T-Panel Curve in Remix 23 (light grey) fabric that is fitted with an organisation rail for steel tray with aluminium-coloured inserts. 4
INSPIRATIONS INSPIRATIONS Inspiration #03 T-Workstation Delta with white-coloured steel frame, height adjustable (650-850 mm) and with a 9 mm table top (of. x mm) in white melamine. Includes a T-Panel Curve in Divina 462 (orange) fabric that is fitted with an organisation rail for steel tray short with flower pot. Inspiration #04 T-Workstation Delta wood with graphite stained oak frame, at a fixed height (740 mm) with a 3 mm table top (compact), 2.000 x mm in white melamine with a Soft Edge. 5
INSPIRATIONS INSPIRATIONS Inspiration #05 T-Workstation Delta with a white-coloured steel frame at a fixed height (740 mm) and 9 mm top (. x mm) in white melamine. Fitted with a a T-Panel Curve dividing wall, in Z-arrangement, in Remix 823 (light grey) fabric with organisation rail for a steel tray and steel tray short. 6
COLOURS & MATERIALS COLOURS & MATERIALS MELAMINE: Basic colours MELAMINE: Additional basic colours,2,3 MW white MQ office white MC canvas 3 MP platinum 2.3 TM clay MT anthracite MA aluminium 3 MS slate 2.3 MB basalt MELAMINE: Décor colours 2.3 AR maple EI oak EC oak moreda BH beech light NG walnut grey MELAMINE: Décor colours with texture,2,3 CE elm white CO coco EA oak aragon MELAMINE: Accent colours,2,3 TX mustard TH marino blue TS fern green not available for compact desk top 2 not available for duo-edge 3 not available for 3 mm edge, single colour 7
COLOURS & MATERIALS COLOURS & MATERIALS VENEER: Maple VENEER: Beech VENEER: Oak AK canad. maple BG beech, grey EY oak, silt ER oak, amaretto EV oak, volcano EG oak grey VENEER: Chestnut KD chestnut natural KP chestnut brown KQ chestnut grey VENEER: Walnut VENEER: Bamboo NF americ. walnut NR walnut, sienna NB walnut, umbra NA wal., anthracite BJ bamboo METAL SURFACE POWDER-COATED WI white AL aluminium SZ black ALUMINIUM ANODISED AL aluminium 8