Xitanium LED drivers spot- and downlight SELV Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications. Reliability is enhanced by features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central DC operation. In the coming years LEDs will continue to increase in efficiency, creating challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. pplication-oriented operating windows offer stable lumen output and light quality levels that specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions from different manufacturers. Benefits High reliability underpinned by 5 year warranty Future-proof flexibility - application-oriented operating windows enable LED generation and complexity management Compatibility - can also be used for other manufacturers' modules or OEMs' own PCB designs Product features Operating windows - output current can be adjusted via the Philips MultiOne configurator ('TD' drivers) or with a resistor outside the driver Hot wiring, reduced ripple current and thermal derating for increased reliability Multiple versions - DLI diable & prograable, trailing-edge diable, fixed-current/fixed-output trailing-edge diable, fixed-output, and fixed-current/fixed-output Power ratings: 10-110 W Choice of housing designs - linear housing for tracks in '3 in 1' in design, conventional HID housings for down- and spotlighting, and SH housing for independent use with strain relief and loop through pplications Retail
Electrical input data Nominal input voltage 220...240 Vac Nominal input frequency 50...60 Hz Nominal input current 0.41 Nominal input power 87 W Power factor 0.9 Total harmonic distortion 20 Efficiency 90, maximum output power Nominal input voltage DC 186...250 Vdc Nominal input current DC 0.25 Input voltage 230 Vdc, full load Input voltage C 202...254 Vac Performance range Input frequency C 47.5...63 Hz Maximum permissible range Input voltage DC 168...275 Vdc Maximum permissible range Regulation method Constant Current Output voltage 55...110 Vdc Output voltage max. 120 V Peak voltage (RMS) at open load Output current 0.3...1 Full output current setting Output current tolerance ±5 Output current ripple 4 Ripple (100Hz) = peak / average Output power 21...75 W Full output Galvanic isolation SELV Electrical output data Lamp to mains Electrical data controls input Control method Touch and DLI diing Diing range 1...100 Galvanic isolation Basic Control input to mains Wiring Input wire cross-section 0.75...2.5 2 WGO804, solid wire WGO804, solid wire 12...20 WG Input wire strip length 10...11 Output wire cross-section 0.08...0.33 2 JST, solid wire 22...28 WG JST, solid wire Output wire strip length 0 Output wire cross-section 0.2...1.5 2 WGO250 (3.5 ), solid wire 16...24 WG WGO250 (3.5 ), solid wire Output wire strip length 8.5...9.5 Maximum cable length 600 Total length of wiring including LED module, one way Page 2 of 6
Dimensions and weight Length (1) 219 Width (B1) 83 Height (C1) 35 Fixing hole diameter (D1) 4.1 Fixing hole distance (2) 206 Weight 425 gram Operational temperatures and humidity mbient temperature -20...+50 Tcase-max 75 Maximum temperature measured at Tc-point Tcase-life 65 Measured at Tc-point Maximum housing temperature 110 In case of a failure Relative humidity 10...90 Non-condensing Storage temperature and humidity mbient temperature -25...+85 Relative humidity 5...95 Non-condensing Page 3 of 6
Lifetime Driver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (OC) Rset2 See Design-in guide. Default output current: 0.7 LED module temperature derating (MTP) Constant Lumen Over Lifetime (CLO) DC emergency diing (DCemDIM) Corridor mode Current output decreased to 15 Energy metering Diagnostics Features Open load protection Remark utomatic recovering Short circuit protection utomatic recovering Over power protection utomatic recovering Hot wiring Suitable for fixtures with protection class I and II Certificates and standards pproval marks ENEC / CE / CQC Ingress Protection classification 20 dditional information Inrush current Inrush current Ipeak 7.4 Input voltage 230V Inrush current Twidth 530 µs Input voltage 230V, measured at 50 Ipeak Drivers / MCB 16 type B 18 pcs Earth leakage current 0.7 mpk LED module contribution not included Earth leakage current Page 4 of 6
Mains input surge capability Surge capability (L-N) 1 kv Surge capability (L/N-Ground) 2 kv dvised NTC type Vishay 15kOhm±2NTC 238161554153 NTC thermistor Murata NCP15XW153E03RC NCP15XW153E03RC With 390Ω in series NTC resistance threshold 2966 Ω Start limiting output current Corresponding temperature 70 With advised type 238161554153 NTC resistance versus output current Graphs Operating window Page 5 of 6
Power factor versus output power Efficiency versus output power Logistical data Product name Order code 728030 00 Logistic code 12NC 9290 008 70203 EN3 8718291728030 Pieces per box 6 2014 Koninklijke Philips Electronics N.V. ll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: www.philips.com/xitanium