NOTE TO USERS NI xx Pinout Labels for the SCB- Multifunction I/O S Series Modules/Devices Using the -Pin Shielded Connector Block If you are using an NI xx (formerly referred to as S Series) multifunction I/O device or module with the SCB-, you can print and attach a connector-specific pinout label to the cover of the connector block for easy connection reference.this document provides labels for the following models: NI NI NI NI NI NI NI NI NI NI
Use the following label if you are connecting the SCB- to the NI, NI, and NI models. Figure. NI // SCB- Quick Reference Label NI // (S Series) Models * : No Connect AI 0 AI AI AI PFI /CTR 0 GATE AI P0. PFI /CTR 0 SOURCE AI GND AI PFI /AI SAMP CLK AI PFI /AO START TRIG AI GND 0 PFI /AO SAMP CLK CTR OUT PFI /CTR GATE PFI /CTR SOURCE PFI /AI CON CLK AO PFI /AI REF TRIG AO 0 ni.com NI xx Pinout Labels for the SCB- Note To Users
Use the following label if you are connecting the SCB- to the NI model. Figure. NI SCB- Quick Reference Label NI (S Series) Models * : No Connect AI 0 AI AI PFI /CTR 0 GATE P0. PFI /CTR 0 SOURCE PFI /AI SAMP CLK PFI /AO START TRIG 0 PFI /AO SAMP CLK CTR OUT PFI /CTR GATE PFI /CTR SOURCE PFI /AI CON CLK AO PFI /AI REF TRIG AO 0 NI xx Pinout Labels for the SCB- Note To Users National Instruments
Use the following label if you are connecting the SCB- to the NI and NI models. Figure. NI / SCB- Quick Reference Label NI / (S Series) Models * : No Connect AI 0 AI AI AI PFI /CTR 0 GATE AI P0. PFI /CTR 0 SOURCE AI GND AI PFI /AI SAMP CLK AI PFI AI GND 0 PFI CTR OUT PFI /CTR GATE PFI /CTR SOURCE PFI /AI CON CLK PFI /AI REF TRIG ni.com NI xx Pinout Labels for the SCB- Note To Users
Use the following label if you are connecting the SCB- to the NI, NI, and NI models. Figure. NI // SCB- Quick Reference Label NI / (S Series) Models * : No Connect AI 0 AI AI AI PFI /CTR 0 GATE AI P0. PFI /CTR 0 SOURCE AI GND AI PFI /AI SAMP CLK AI PFI AI GND 0 PFI AI CTR OUT AI - AI GND PFI /CTR GATE AI AI - PFI /CTR SOURCE AI GND AI PFI /AI CON CLK AI - PFI /AI REF TRIG AI GND AI AI - AI GND NI xx Pinout Labels for the SCB- Note To Users National Instruments
Use the following label if you are connecting the SCB- to the NI model. Figure. NI SCB- Quick Reference Label NI (S Series) Models * : No Connect AI 0 PFI /P. AI PFI /P. AI PFI /P. AI PFI /P. AI P0. PFI /P.0 AI GND AI PFI /P. AI PFI /P. AI GND 0 PFI /P. PFI /P. PFI /P. PFI /P. PFI /P. AO PFI /P. AO 0 PFI 0/P.0 PFI /P. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR.-, DFAR.-0, and DFAR.-0. National Instruments. All rights reserved. A-0 Feb