TEST EQUIPMENT OVERVIEW OF Mobile Test Panels Series PMK 2 PMK 3 PMK 4 PMKD 2500 Rated current 16 A 32 A Mains connection optionally via 2m each Earthed safety plug Earthed safety plug optionally via 2m each Mains connection cable with 16A/230V or 16A/230V connection cable with Earthed safety plug 16A /230V; CEE-plug Earthed safety plug CEE-plug 3pole 16A/230V or. 5p 16A/400V 16A/230V; CEE-plug CEE-plug 5pole 16A/400V (adapter) 5pole 16A or 32A/400V Safety testing on: Single-phase devices x x x x Three-phase devices x x x x Test connectors: Safety contact 16A 3-pole 230V x x x x CEE 16A 3-pole 230V x x x CEE 16A 5-pole 400V x x x x CEE 32A 5-pole 400V x x x Safety jacks 3-pole/N/PE 16A x x Mains/Tester changeover switch x x Phase changeover switch x x Parameters: Current measurement ranges 0 1A, 0 6 A max 16 A 0 40 A 0 15 A Operating voltage 0 500 V 0 400 V 0 260 V Multi-function meter Multimeter - Leakage Watt meter current clamp meter 0... 25 kw Continuity testing: optical x x Watt meter acoustic x x For more details see Page 27 Page 26 Page 25 Page 28 A COMPACT GUIDE TO SAFETY TESTING: PROTECTION CLASSES Class I Definition: All active parts of the appliance are protected by the basic insulation from direct contact. Touchable parts are connected to the earth conductor and are thus protected against indirect contact (fault protection). Examples: irons, cookers, toasters, concrete mixers, extension cords. Class II Class III Remarks Definition: The active parts of the appliance are protected by strengthened or double insulation from direct contact. This ensures protection against direct contact. Protection from indirect contact is also assured because it is practically impossible for an insulation fault to occur. Examples: many small household appliances (hair dryers, food mixers), many hand-operated electrical tools (drills, hand-held circular saws). Definition: Protection against dangerous shock currents to the body is achieved by using low voltages and secure isolation from other circuits. Examples: Toys; tools for use in boiler construction Many appliances cannot be classified unambiguously under one of these protection classes as defined in the standards. They may, for example, be built with protection insulation but have, by necessity of their function (e.g. electromagnetic interference screening) an earth conductor that, for testing purposes, is not fully accessible. In such cases, such as with PC monitors, the appliance may be tested as for Class II. 26 OVERVIEW OF
PMK 4400 PMK 4 SERIES - THE TOOLKIT FOR REGULAR SAFETY TESTING for the safety testing of single-phase and three-phase appliances on site. With built-in appliance testers for testing to DIN VDE 0701/0702 and BGV A3. ß All components integrated into a robust plastic case. ß Safety tests to DIN VDE 0701/0702 and BGV A3 for single-phase and three-phase devices: - Earth-conductor resistance testing 0 1000 MΩ (test current 250mA AC) - Insulation resistance testing 0.2 10 MΩ (test voltage 500V DC) - Equivalent leakage current test 0 18mA AC (test voltage 40V AC) - Residual current test 0 5mA AC (operating voltage 230V AC/16 A) with automatic polarity reversal for single-phase devices (earth-conductor and touch current tests) ß Connectors: earthed safety socket 16A, 3-pole, 230V; CEE 16A, 5-pole, 400V and CEE 32A, 5-pole, 400V ß Mains connection via earthed safety plug DIMENSIONS AND WEIGHT: 455x368x166 mm, approx. 4,5 kg PMK 4000 MZ 69492 PMK 4100 MZ 69493 PMK 4400 MZ 69494 PMK 4600 MZ 69499 VERSIONS WITH BUILT-IN APPLIANCE TESTER: ACCESSORIES: e-manager test data management software, pages 35-36, other accessories pages 37-39 PMK 4000 PMK 4100 PMK 4400 PMK 4600 Barcode hand scanner MZ69530 x x Test data management software MZ69532 MZ69590 x x x Serial-USB MZ69533 x x x 27
EQUIPMENT PMK 3400 PMK 3 SERIES - THE TOOLKIT FOR THE PROFESSIONAL for the testing of single-phase and three-phase appliances on site. With built-in appliance testers for testing to DIN VDE 0701 and 0702 and multi-function clamp meter with digital readout for measuring operating and fault currents. ß Safety tests to DIN VDE 0701/0702 and BGV A3 for single-phase and three-phase devices: - Earth-conductor resistance testing 0 1000 MΩ (test current 250 ma AC) - Insulation resistance testing 0.2 10 MΩ (test voltage 500V DC) - Equivalent leakage current test 0 18mA AC (test voltage 40V AC) - Residual current test 0 5mA AC (operating voltage 230V AC/16 A) with automatic polarity reversal for single-phase devices (earth-conductor and touch current tests) ß Connectors: earthed safety socket 16A, 3-pole, 230V; CEE 16A, 3-pole, 230V; CEE 16A, 5-pole, 400V and laboratory safety sockets 16A, 5-pole, 400V ß digital multi-function clamp meter for testing: - current and fault current in single-phase and three-phase appliances from 0.05mA to 100A; resolution to 10μA - voltage measurement 0 400V AC - resistance measurement to 400Ω - Optical and acoustic continuity testing - max/min function, high-resolution 3 ¾ LCD display with bargraph for conductors up to 30mm diameter ß Mains connection via earthed safety plug, CEE plug 3-pole 16 A/230V or CEE plug 5-pole, 16A/400V ß All components integrated into a robust plastic case. DIMENSIONS AND WEIGHT: 455x368x166 mm, approx. 8 kg PMK 3000 MZ 69486 PMK 3000 OZ MZ 69489 PMK 3100 MZ 69487 PMK 3100 OZ MZ 69490 PMK 3400 MZ 69488 VARIANTEN: as PMK 3000 but without fault leakage clamp meter as PMK 3100 but without fault leakage clamp meter PMK 3400 OZ MZ 69491 PMK 3600 MZ 69498 as PMK 3400 but without fault leakage clamp meter ACCESSORIES: e-manager test data management software, pages 35-36, other accessories pages 37-39 PMK 3000 PMK 3100 PMK 3400 PMK 3000 OZ PMK 3100 OZ PMK 3400 OZ PMK 3600 Barcode hand scanner MZ69530 x x x Test data management software MZ69532 x x MZ69590 x x x x x Serial-USB MZ69533 x x x x 28
PMK 2100 PMK 2 SERIES - THE PORTABLE STANDARD MODEL IN A ROBUST transport CASE for the testing of single-phase and three-phase appliances on site. With built-in automatic appliance testers for testing to DIN VDE 0701 and 0702. ß Safety tests to DIN VDE 0701/0702 and BGV A3 for single-phase and three-phase devices: Earth conductor resistance test, insulation resistance test, equivalent leakage current test, residual current measurement with automatic polarity reversal for single-phase devices (earth wire and touch current test) ß Connectors: earthed safety socket 16 A, 3-pole, 230 V; CEE 16 A, 3-pole, 230 V; CEE 16 A, 5-pole, 400 V and laboratory safety sockets 16 A, 5-pole, 400 V ß Mains voltage display, switchable L-L / L-N (range 0 500V) ß Current to single-phase and three-phase devices up to max. 16A, switchable L1, L2, L3 (ranges 0-1A, 0-6A, 0-15A) ß Optical and acoustic continuity testing ß external voltage measurement 0 500V AC (range 0 500V) ß Phase rotation direction reversing switch for 3-phase motor devices ß Mains connection via earthed safety plug, CEE plug 3-pole 16 A/230V or CEE plug 5-pole, 16A/400V ß external emergency OFF switch ß All components integrated into a robust, damp-proof plastic case. DIMENSIONS AND WEIGHT: 600x495x215 mm, approx. 15 kg PMK2000 PMK2100 PMK2400 PMK2600 MZ69464 MZ69465 MZ69467 MZ69468 VARIANTEN: ACCESSORIES: e-manager test data management software, pages 35-36, other accessories pages 37-39 PMK 2000 PMK2100 PMK 2400 PMK 2600 Barcode hand scanner MZ69530 x x Prüfdatenverwaltungssoftware MZ69532 MZ69590 x x x Serial-USB MZ69533 x x x 29
EQUIPMENT PMKD 2500 MZ69549 PMKD 2500 - THE PROFESSIONAL TOOLKIT FOR REGULAR SAFETY TESTING UP TO 32A/25kW CONNECTED capacity for the safety and function testing of single-phase and three-phase appliances on site. With integral safety and function tester for testing to DIN VDE 0701/0702 and BGV A3. Example menu, left: START SCREEN Menu VDE Test Setup Memory Continue IDENT NUMBER ENTRY Ident number ID no. 10452 Appliance Hammer drill Manuf. Hilti Client Merz GmbH Menu Continue EARTH-CONDUCTOR TEST Earth conductor OK Limit value 0.300 ohm 0,203 ohm Max 0,205 ohm Menu Reset Continue L1 230 V 2,0 A L2 231 V 3,1 A L3 235 V 1,4 A lt. 0,035 Id 0,00 ma P 8115W Menu Reset Continue ß Connectors to test object: laboratory safety sockets, cold device and earthed safety socket 16 A/230V; CEE 16A, 3-pole, 230V; CEE 16A and 32A, 5-pole, 400V (plug and socket each) ß Safety tests to DIN VDE 0701/0702 and BGV A3: - Earth conductor resistance measurement (0-4Ω, no-load voltage 6V, current 200mA DC); - Insulation resistance test (0-20MΩ, no-load voltages 500 V, 1000 V; short-circuit current 1mA); - Equivalent leakage current test (0-40mA, no-load voltage approx. 150V); - Residual current test for single-phase and three-phase systems (filter characteristic DIN VDE 0404 for correct weighting of harmonics; earth current 0 40.00mA and touch current 0 4.0mA) ß Test cycle mode: step by step or automatic ß User interface: - Control via menus on back-lit dot-matrix display - Clear text operation via alphanumeric keyboard - Identification of item under test by entering an ID number or via barcode reader - OK/Fault indication - Before testing a classification is carried out of the test device to define the test cycle and to set the limit values in accordance with the VDE regulation required (e.g. protection class, heat output, earth conductor length). Separate cycles are provided for extension cords and appliances with fixed connections. - Statistical analysis of tests independent of external software ß Measurement parameters: - Voltage per phase: 0 260.0 V - Voltage per phase: 0 40.00 A - Total power: 0...24kW in range up to 15th harmonic ß Testing of extension cords: Test of earth conductor and insulation resistances and continuity test with phase sequence test. ß RS232 serial interface (USB available via adapter PM RS232-USB, article no. MZ69533) ß Phase rotation direction reversing switch for 3-phase motor devices ß Mains supply via CEE plug 5-pole 32A/400V, 16 A/400 V or earthed safety plug 16 A/230 V ß The PMKD 2500 includes the following protective features for the safety of the user: - The 16A circuits are separately fused in the unit. - Should dangerous fault currents occur (over 20mA) an integral fault-current detector isolates the test device from the mains automatically. - A connection detector monitors the protective earth voltage in the system and checks the field rotation of the supply. ß Integral 3-phase power analysis and connection check ß Internal memory for 500 test records with date and time stamp, readable via serial interface (optional software PMKD 2500 PC-S) ß All components integrated into a robust, damp-proof plastic case. DIMENSIONS AND WEIGHT: ca. 530x440x220 mm, approx. 9,5 kg PMKD 2500 MZ69549 OTHER VERSIONS: Professional toolkit for regular safety testing according to DIN VDE 0701/0702 and BGV A3 including tester certificate and 2m test leads PMKD 2500 PC-S PM SC1 PM RS232-USB MZ69550 MZ69530 MZ69533 ACCESSORIES: PC software for PMKD 2500 (see page 36) Barcode hand scanner (see page 38) Interface adapter from RS 232 serial to USB (see page 38) 30