Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating temperature range: -0 to +85 C Various options and customization Standard Product Variety Soldering eyelets or pins for PCB From x to 6 x poles/positions per wafer Up to 8 wafers 5 or 0 indexing angle Shorting or non-shorting.5, 8.0, 5 or 0 Ncm switching torque IP60 or IP68 front panel sealing Configurable end stops Shaft diameter: 6 mm or ¼" Examples of Customization Possible Customization Shaft dimensions and shape Bushing dimensions Switching torque Hollow shaft, inner shaft Others Typical Applications Industrial controls Avionics, instrumentation, test systems Medical and audio equipment Examples of Customization High-end audio solution with gold plated housing and PCB Momentary function to left and right side with center rest Dual concentric switch arrangement with two 0s 7 Rotary Switches
Selector Switch Type 0 Preference Types Selection Chart Indexing Angle 5, Shorting Contact Arrangement Construction Indexing Angle 0, Contact Arrangement Non-Shorting Construction Poles x Positions With Solder Eyelets With Pins for PCB x, x, x, x, x x x x x x 6 x 8 x x7 6x7 9x7 x 7 x5 8x5 x 5 6 x 5 6x x 8 x x 0-0 0-0 0-0 0-0 0-0- 0-0- 0-0- 0-0- 0-7 0-7 0-7 0-7 0-5 0-5 0-5 0-5 0-6 0-6 0-6 0-6 0-0-0 0--0 0--0 0-7-0 0-5-0 0-6-0 Poles x Positions With Solder Eyelets With Pins for PCB x, x, x, x, x x x x x6 x6 6x6 8x6 x 6x 9x x x 8x x 6 x 6x x 8 x x 0-0 0-0 0-0 0-0 0-0- 0-0- 0-6 0-6 0-6 0-6 0-0- 0-0- 0-0- 0-0- 0-6 0-6 0-6 0-6 0-0-0 0--0 0-6-0 0--0 0--0 0-6-0 Packaging Unit Order Number 0 pcs. 00 pcs. 0 pcs. - -0 - Stop Screws and Bushing Nut Configurable stop screws can be set on any position between and the maximum. Stop screws have to be ordered separately. For other types/options, see type key. Stop screw M. Stop screw M. Bushing nut Rotary Switches 8
Selector Switch Type 0 Specifications Mechanical Data Resolution:... positions max. (5 indexing); shorting positions max. (0 indexing); non-shorting Switching torque (new condition):...5, 8.0, 5 or 0 Ncm (+/- 5%), additional wafers may increase switching torque Rotational life:...5,000 switching cycles min. Fastening torque of nut:...00 Ncm max. Electrical Data Function:...From x to 6 x poles/positions per wafer (max. 8 wafers; >8 wafers are available on request) Switching mode:...shorting (for 5 indexing) Non-shorting (for 0 indexing) Load current:... A max. (resistive load) Switching voltage:... VDC max. Contact resistance (new condition):...0 mohms max. Insulation resistance:...0 Ohms min. (contact to contact/housing) Switching capacitance:... pf max. (contact to contact) Dielectric withstanding voltage:...500 VDC during 60 seconds Material Data Shaft:...Stainless steel Bushing/housing:...Zinc diecast, zinc plated and passivated Nut:...Brass, zinc plated and passivated Contact plating:...auco (hard gold); µm Insulation material:...wafer: HF ceramic, rotor: Polybutylene (PBTB) Soldering leads:...alloy copper, AuCo plated (hard gold) Environmental Data Operating/storage temperature range:...-0 to +85 C IP sealing:...ip60, optional IP68 ( bar, hour) shaft/front panel sealing Vibration:...0 Grms max. @ 0 to 000 Hz Flammability:...UL9-HB Packaging Sizes Tray:...0 pcs. Soldering Conditions Hand soldering:...0 C max. during s max. Wave soldering:...80 C max. peak temperature during 5 s max. Switching Modes Non-Shorting (break before make) Contact bridge Contact bridge Contact bridge Contact Contact Contact Contact Contact Contact Shorting (make before break) Contact bridge Contact bridge Contact bridge Contact Contact Contact Contact Contact Contact 9 Rotary Switches
Selector Switch Type 0 Drawings With Solder Eyelets SW Schlüsselweite SW = key spanner M0 x 0,75,5 SW 9, 7,5,7 ø,6 Front panel cut out ø6 6,7,5,5 9,5 AL = 5,5,8 5, 5 0, 7,5 With Pins for PCB Mounting Drilling diagram 5 for indexing angle Drilling diagram 0 for indexing angle,5,5 x,, Locating Verdrehschutz lug Ansicht des Bohrplanes View from von the der Schalterachse shaft end her x x6 0,5 6 89 0 5 7 A 09 8 7 6 5 x x 5,5 5 x x7 x7 x0 8 7 6 5 9 0 x x0 0,5 5 B B B 5B B 6B 6A 5A A x A A A x90 5 5B6B7B B 8B B 9B B 0B B B B A A A 0A A 9A A 8A A 7A 6A5A 5 5 C C CC 7B 5C 6B 6C 5B B C 7C B B A A B B A A A 7A 6A5A 0 5 C C B C B C B A B A A A 5 C C D D C D B A B A B A 5 x5 5C D C D C D C D C C D 5D B 5B A A B A B A B A B 5A 0 x90 5 6x 6x60 E E E D F F D D E F D C F C A C B A A C A B BB 0 5 6x 6x60 E E D F D F C A C A B B 5 = ø,mm = ø,mm Switch with Momentary Contact Examples Detent position Momentary contact Dimensions *7.5 mm extra per wafer Rotary Switches 50
Selector Switch Type 0 Hollow Shaft System Hollow Shaft Available for switches up to 5 wafers; inner shaft (Ø mm) to be ordered separately. Inner Shaft For switches with mounting plate or hollow shaft, inner shafts must be ordered separately. Please state exact length. Switches with Drive Shafts Consisting of a hollow outer plus and inner shaft. The inner shaft driving a maximum of wafers with 6 wipers each. Please give type description of each switch. Spacers Spacers can be used in many cases in place of shortened bushes; made of glass-fibre reinforced plastic to compensate the front panel thickness; available in two standard lengths. Length L Packaging Unit Order Number.5 mm 0 pcs. -.5 mm 00 pcs. -0 5.5 mm 0 pcs. -6 5.5 mm 00 pcs. -5 5 Rotary Switches
Selector Switch Type 0 Type Key 0 - X X X X - X X X X X X X X Wafer Type - HF ceramic P - PCB Shaft Diameter 0-6 mm Z - ¼" Number of Wafers Number of Poles per Wafer Factory set character Switching Mode - Shorting - Non-shorting Torque - 5 Ncm M - 8.0 Ncm N - 0.0 Ncm R -.5 Ncm Factory Set End Stop 00 - Standard - pos. - pos. - pos. 0-0 pos. 9-9 pos. 8-8 pos. 7-7 pos. 6-6 pos. 5-5 pos. - pos. - pos. - pos. - pos. 0-0 pos. 09-9 pos. 08-8 pos. 07-7 pos. 06-6 pos. 05-5 pos. 0 - pos. 0 - pos. 0 - pos. Shaft Length (AL) 000-5 mm xxx - Custom (e.g. 8.5 mm = 85) Customized Shaft Length Please state shaft length (AL) measured from mounting face (max. AL = 50 mm). Pin Style, IP Sealing 00 - Eyelets 0 - Pins for PCB 0 - Eyelets, IP68 70 - Pins for PCB, IP68 Rotary Switches 5