NEWS GPS BASED METHODS FOR AREA MEASUREMENT APPROVED BY EC

Similar documents
Certification of EGNSS Timing Receivers and Services

Challenges of retrofit equipment: Certification, Type Approval and Declaration of Conformity. 20 May 2017 NavCert 1

DESCRIBING, DEVELOPING & CERTIFYING DIGITAL COMPETENCE

Post-accreditation monitoring report: British Gymnastics (BG) April 2007 QCA/07/3121

End-to-end Safety, Security and Reliability Keys for a successful I4.0 Migration

PECB Change Log Form

Balancing energy and environmental demands

DAkkS Who we are. Attesting competence, Assuring quality, Creating confidence.

Examination Regulations for Employee Certification regarding Usability Engineering

The Council Information Assurance sector seeks a national expert to reinforce the area of 'security of EU classified information'.

Balancing energy and environmental demands

NavCert GmbH ecall Days 2016 Hamburg Martin Grzebellus NavCert 1

PROTERRA CERTIFICATION PROTOCOL V2.2

ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS

Revised November EFESC Handbook

ISO/IEC INTERNATIONAL STANDARD

9 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF)

ICT Legal Consulting on GDPR: the possible value of certification in data protection compliance and accountability

Validation Report. Consorzio Stabile Globus. 2009, March 20 th

Level 2 IVQ Diploma in Training Skills( )

Aviation Academy International GmbH AVIATION ACADEMY INTERNATIONAL. ISO Certification of Aviation Experts

Kriteriji za osoblje Dio-147 organizacije / Criteria for Part-147 organisation personnel

Guidelines 4/2018 on the accreditation of certification bodies under Article 43 of the General Data Protection Regulation (2016/679)

PART IV GLOSSARY OF TERMS

ARTICLE 29 DATA PROTECTION WORKING PARTY

Level 3 Award in Requirements for Electrical Installations BS7671: 2008 (2015) ( ) January 2015 Version 1.1

BSI C5 Status Quo. Dr. Clemens Doubrava, BSI,

CERTIFICATE IN LUXEMBOURG COMPANY SECRETARIAL & GOVERNANCE PRACTICE

D3.1 Validation workshops Workplan v.0

FEE Qualification and Market Access Working Party

Guide for the international tekom certification examinations

PRODUCT SAFETY PROFESSIONAL CERTIFICATION PROGRAM DETAILS. Overview

DISCUSSION PAPER. Board of Certification Oral Examination Consistency

Rules and Process Steps for Certification of Job Roles

Cooperation with other Certification Systems

Training Catalog. Decker Consulting GmbH Birkenstrasse 49 CH 6343 Rotkreuz. Revision public. Authorized Training Partner

Integrity of Farm Assurance. Selected Items from the EurepGAP Integrity Programme. Chris Anstey Tesco plc., UK and Kristian Moeller.

Training courses held by the Kazakh and foreign experts for financial system specialists in 2011 in the Republic of Kazakhstan

engineering card More Mobility for Engineers in Europe VDI The Association of German Engineers

Description of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS BS OHSAS 18001, MS - ISO 45001, MS - ISO 50001

Professional Evaluation and Certification Board Frequently Asked Questions

TURKISH ACCREDITATION AGENCY. Training, Promotion and Information Directorate

Vaccine data collection tool Oct Functions, Indicators & Sub-Indicators

The emerging EU certification framework: A role for ENISA Dr. Andreas Mitrakas Head of Unit EU Certification Framework Conference Brussels 01/03/18

Powered by nature. Certification and testing services for the photovoltaic sector. TÜV SÜD Product Service GmbH

UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION. The National Quality Infrastructure Project for Nigeria (NQIP) Project ID

19 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF)

Overview of the U.S. Approach to Standards. Jessica Hychalk American National Standards Institute June 29, 2010

SAP PartnerEdge Program Guide for Authorized Resellers

ACCAB. Accreditation Commission For Conformity Assessment Bodies

SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008

Boxing Australia Referees and Judges Committee

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements

LL-C (Certification) Services Overview

Personnel Certification Program

THE INTERNATIONAL INSTITUTE OF CERTIFIED FORENSIC ACCOUNTANTS, INC. USA. CERTIFIED IN FRAUD & FORENSIC ACCOUNTING (Cr.

2016 NCCA Standards Revisions Recap and Takeaways: What You Need to Know

Usage of a common terminology as well as established techniques and methods key success factors of Requirements Engineering. Stefan Sturm IREB GmbH

Certified in Risk and Information Systems ControlTM Certification Training - Brochure

"Charting the Course... ITIL 2011 Service Offerings & Agreement (SOA) Certification Program. Course Summary

Workshop Item 1 - ISO 9001: 2008 migration

IPC Certification Scheme IPC QMS/EMS Auditors

EUROPEAN ACCREDITATION LEGAL FRAMEWORK

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

European agreement on the Implementation of the European Hairdressing Certificates

Inspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T

R NOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATIONS AND APPROVAL

CC withinthe Context of the EU Privacy Seal - EuroPriSe

IECRE OPERATIONAL DOCUMENT

General Rules for Product Certification by the co-operation of certification bodies (GRPC)

Appendix 2. Level 4 TRIZ Specialists Certification Regulations (Certified TRIZ Specialist) Approved for use by MATRIZ Presidium on March 21, 2013

VOLUNTARY CERTIFICATION SCHEME FOR MEDICINAL PLANT PRODUCE REQUIREMENTS FOR CERTIFICATION BODIES

Testing and Certification Procedure

PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR)

NATIONAL QUALIFICATION AUTHORITY

INSTRUCTOR HIRING CRITERIA

Cybersecurity. Quality. security LED-Modul. basis. Comments by the electrical industry on the EU Cybersecurity Act. manufacturer s declaration

Certification of ITC Educational Programs Rules and Regulations

AMERICAN CONCRETE INSTITUTE. Certification Policies for Specialty Commercial / Industrial Concrete Flatwork Technician and Finisher & Technician

ITIL 2011 Foundation Certification Training - Brochure

Learn how to explain the purpose and business benefits of an ISMS, of ISMS standards, of management system audit and of third-party certification

QUALITY ASSURANCE POLICY. Quality Assurance Policy. September 2016 Version 2.0 Policy authorised by Responsible Officer

Levels 1-3 Qualifications in Engineering (2850)

Introduction to AWS GoldBase

ISO Second edition Corrected version Reference number ISO :2012(E)

National Vocational Qualifications Delivered Overseas policy

Manufacturer certification in plant, metal and rolling-stock engineering

EVALUATION AND APPROVAL OF AUDITORS. Deliverable 4.4.3: Design of a governmental Social Responsibility and Quality Certification System

Inhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593

Application for admission for IATF rd party auditors for IATF-recognized certification bodies

IECEx OPERATIONAL DOCUMENT

Reference Framework for the FERMA Certification Programme

Validation Report 11 September 2007

NIST Designation of CABs: Upcoming Changes for the US and EU Review for Japan

2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ITIL Managing Across the Lifecycle (MALC) Certification Training - Brochure

Continuing Professional Education (CPE) CPE Rules for Pesticide Advisors

SAS Rules for Accreditation Purposes in the context of Notification - Designation of Conformity Assessment Bodies (CAB)

e-mobility We make the future safe TÜV SÜD AG

Transcription:

NEWS GPS BASED METHODS FOR AREA MEASUREMENT APPROVED BY EC Martin Grzebellus Managing Director JRC GPS Workshop 11. 04. 08 Dublin NavCert GmbH Hermann-Blenk-Straße 22 D 38108 Braunschweig

choose certainty, add value

TÜV SÜD group Facts and Figures A technical service provider 13,000-plus staff 600-plus locations worldwide 2007 sales: Euro 1,300 million Headquarters: Munich, Danvers, Singapore Over 140 years of business success 3

Directive 927/2007 Article 30(1) Agricultural parcel area shall be determined by any means proven to assure measurement of quality at least equivalent to that required by applicable technical standard as drawn up at Community level. A measurement tolerance shall be defined by a buffer of maximum 1.5 m applied to the perimeter of the agricultural parcel. The maximum tolerance with regard to each agricultural parcel shall not in absolute terms, exceed 1,0 ha.

Consequences of the new directive Any methodology to measure agricultural parcels may be used provided It fulfills required accuracy It is defined at Community level It is proven to fulfill requirements GPS may be used

Achievements JRC Joint Research Centre of the EU commission has defined a validation scheme for GPS based measurement equipment JRC has set up a trial certification process NavCert is accredited by JRC NavCert provides certificates for GPS based area measurement equipment Certified equipment is available

Why Certification (1) only official verification provides reliable results clear definition of accuracy certified equipment provides results within defined limits certification reduces liability reproducible measurements by all parties reliable results, usable in court regarded as proof of evidence by insurances

Why Certification (2) Test mark can be used in any communication to customer Brochure, WEB, exhibitions, product, packaging Test mark increase reliability of product claims Test mark is a proof that product fulfills requirements of Commission Regulation No. 972/2007 New market opportunities

Certification Process Order Certificate Field test /Laboratory Certification Test check of agreement Review Certification underwrite certificate Certification body product release test certificate factory review of technical formal inspection reports evaluation evaluation

Test Mark Suited for area measurements of parcels Cat A with buffer size < 0.40 m www.navcert.com/ PPP80010 Suited for area measurements of parcels Cat B with buffer size < 1.2 m www.navcert.com/ PPP80010

Starting situation and objective Status Reached: certified equipment is available Additionally to testing and validation of the GNSS equipment it must be stressed that proper qualification of the operator of the instrument is essential. The operator should have received sufficient instructions and certified training and hold an official certificate of proficiency. Result of a study by Prof. Oszczak (University of Warmia and Mazury, PL)

Next Step Goal: provide training and certification for operators : farmer surveyor (as service provider) surveyor (expert in department of agriculture) establish local know-how in each member state of the EU Strategy for implementation: step by step approach country wise introduction

Course Concept (step by step country wise) Training Class: max. 10 participants 2 days training Course Content: theoretical education practical exercises Exam / Certification: multiple choice exam validity 3 years 1 st languages: German and English 1 st venues: Munich and Frankfurt follow up la: any EU language, EUwide regulations, requirements Fundamentals of satellite positioning use of certified equipment agricultural knowledge on-site training at the end of each training independent invigilator of TÜV SÜD centralized marking and evaluation independent examination system Trainer Prerequisites / Add-Ons: evidence of trainer expertise additional 1 day training validity of certification 2 years train the trainer workshops more details, potential difficulties 1st language: German and English 1st venues: Munich and Frankfurt advanced examination

Local Activities in each EU-country Preparation: participate successfully at the Train-the-Trainer workshop translate training material and exam questions to local language and get approval Training and Examination: organize and hold training at local venues as required organize examination and certification of the participants Controlled and supported by TÜV SÜD Independent Examination provide set of exam questions nominate the invigilator provide the certifications for the candidates

Principles of Certification of Persons Multidisciplinary Committee Defined Certification Standard Continuous Improvement Process Objective Criteria Catalogue Transparent Test/Exam Requirements

6 Modules of Training Course Certification 6. 5. 4. 3. 2. 1. TÜV SÜD certification of training course Continual improvement process (customer feedback, participants evaluation, corrective and preventive action, more) Assessment (training institutes, trainers and their qualification, system, more) Expert assessment of documentation (training concept, accompanying material, examination system, more) Definition of assessment criteria (training concept, prerequisites for candidates, examination system, more) Formation of multidisciplinary committee (representatives from the EU and EU-countries; education sector, clients, industry, other)

6 Modules of Person Certification 6. 5. 4. 3. 2. 1. TÜV SÜD Certification of Persons Continual improvement process (regular actualisations of the examination process by the committee) Execution of certification process (appointment of qualified examiners management of the examination) Examination Questions (development and release by the committee TÜV SÜD) Examination Regulations (development and release by the committee TÜV SÜD) Formation of multidisciplinary committee (representatives from the EU and EU-countries; education sector, clients, industry, other)

Multidisciplinary Committee Committee Members: Representative from the EC Representatives from universities Representatives from manufactureres Lead-trainers Representatives from EU member states TÜV SÜD Akademie - Certification Body for Persons NavCert Duties: Advising the Certification Body Approve the certification system Act as advisory body of the stakeholders Propagate the certification activities in their specific areas

Schedule (step by step / country-wise) 1st Q 2009 2nd Q 2009 3rd Q 2009 4th Q 2009 Train the Trainer: 2-3 trainers per Federal State of Germany - Department of Agriculture i.e. 3-4 training classes Pilot training: 2-3 training classes German language Translation:..of training material and exam questions to English Regular training Germany: training classes as required German language Train the Trainer 2 training classes per country France Poland Italy English language trainings center: Munich or Frankfurt Regular training France: training classes as required local language Regular training Poland: training classes as required local language Regular training Italy: training classes as required local language Further countries

Chose certainity, add value Thank You for your Attention NavCert GmbH Phone: +49 531-35479490 info@navcert.com www.navcert.com