Test Report issued under the responsibility of: TEST REPORT IEC 61347-2-13 Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules Report Number....: 14-028946-07 Date of issue...: 2014-09-05 Total number of pages... 67 Applicant s name...: Darfon Electronics Corp. Address...: 167, Shanying Road, Gueishan, Taoyuan 33341, Taiwan R.O.C. Test specification: Standard...: IEC 61347-2-13:2006 used in conjunction with IEC 61347-1 (Second Edition) : 2007+A1:2010 Test procedure...: CB Scheme Non-standard test method..: N/A Test Report Form No....: IEC61347_2_13C Test Report Form(s) Originator...: Intertek Semko AB Master TRF...: 2011-06 Copyright 2011 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description... : LED DRIVER Trade Mark... : Manufacturer... : Same as applicant Model/Type reference... : MDC-120-x (x=0350, 0500, 0700, 1050) Ratings... : I/P: 100-277Vac, 50/60Hz, 1.5A O/P: See General Product Information for details. ta = 60 C, tc = 90 C, Class I
Page 2 of 67 Report No. : 14-028946-07 Testing procedure and testing location: CB Testing Laboratory: KTL (Korea Testing Laboratory) 87, Digital-ro 26-gil, Guro-gu, Seoul, 152-848, Korea Associated CB Laboratory: Jae-hoon Jung Jinwook Kwon Testing procedure: TMP...... Testing procedure: WMT Witnessed by (+ signature)...: Testing procedure: SMT Supervised by (+ signature)...: Testing procedure: RMT Tested by (name + signature)... : Approved by (+ signature)... : Supervised by (+ signature)... :
Page 3 of 67 Report No. : 14-028946-07 List of Attachments (including a total number of pages in each attachment): ATTACHMENT #1: Testing according to EN 60598-1 (3 pages) ATTACHMENT #2: National Differences (2 pages) ATTACHMENT #3: Photographs (3 pages) ATTACHMENT #4: PCB Layout (1 page) Summary of testing: Tests performed (name of test and test clause): All applicable tests were performed. Details see appended clauses and tables. The equipment operated at maximum specified LED module with maximum power condition. The test samples are pre-production without serial numbers. The maximum operational ambient temperature as specified by the manufacturer is ta = 60 C. The maximum operation temperature of the case as specified by the manufacturer is tc =90 C. The equipment has been evaluated with IP65 and IP67. Double M test requirement is verified according to DIN VDE 0710-14 as follows: Heating test was computed according to the installation. - During temp-rise test, the mounting surface and 95 C. - During abnormal-test, the mounting surface and 110 C. Tests were performed in a wooden test box with the following dimension: Testing location: All tests as described in Test Case and Measurement Sections were performed at the laboratory described on page 2. Unless otherwise specified, during all tests following conditions applied: - All applicable tests were performed in label side upward. - With sealing compound material, see component list for the details. - The highest load declared by manufacturer used. Unless otherwise specified, tests were performed on model MDC-120-0350 and MDC-120-1050 to represent other similar models.
Test Report issued under the responsibility of: TEST REPORT IEC 61347-2-13 Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules Report Number....: 14-028946-03 Date of issue...: 2014-10-23 Total number of pages... 69 pages Applicant s name...: Darfon Electronics Corp. Address...: 167, Shanying Road, Gueishan, Taoyuan 33341, Taiwan R.O.C. Test specification: Standard...: IEC 61347-2-13:2006 used in conjunction with IEC 61347-1 (Second Edition) : 2007+A1:2010 Test procedure...: CB Scheme Non-standard test method..: N/A Test Report Form No....: IEC61347_2_13C Test Report Form(s) Originator...: Intertek Semko AB Master TRF...: 2011-06 Copyright 2011 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description... : LED DRIVER Trade Mark... : Manufacturer...: Same as applicant Model/Type reference...: MDC-120-x (x= 1400, 2450, 2800, 3500, 4450) Ratings...: I/P: 100-277Vac, 50/60Hz, 1.5A O/P: See General Product Information for details. ta = 60 C, tc = 90 C, Class I
Page 2 of 69 Report No.: 14-028946-03 Testing procedure and testing location: CB Testing Laboratory: KTL (Korea Testing Laboratory) 87, Digital-ro 26-gil Guro-gu, Seoul, 152-848, Korea Associated CB Laboratory: Yong-Rho Lee Jinwook Kwon Testing procedure: TMP Testing procedure: WMT Witnessed by (+ signature)...: Testing procedure: SMT Supervised by (+ signature)...: Testing procedure: RMT Tested by (name + signature)... : Approved by (+ signature)... : Supervised by (+ signature)... :
Page 3 of 69 Report No.: 14-028946-03 List of Attachments (including a total number of pages in each attachment): ATTACHMENT #1: Testing according to EN 60598-1 (3 pages) ATTACHMENT #2: National Differences (2 pages) ATTACHMENT #3: Photographs (6 pages) Summary of testing: Tests performed (name of test and test clause): All applicable tests were performed. Details see appended clauses and tables. The equipment operated at maximum specified LED module with maximum power condition. The test samples are pre-production without serial numbers. The maximum operational ambient temperature as specified by the manufacturer is ta = 60 C. The maximum operation temperature of the case as specified by the manufacturer is tc =90 C. The equipment has been evaluated with IP65 and IP67. Double M test requirement is verified according to DIN VDE 0710-14 as follows: Heating test was computed according to the installation. - During temp-rise test, the mounting surface and 95 C. - During abnormal-test, the mounting surface and 110 C. Tests were performed in a wooden test box with the following dimension: Testing location: All tests as described in Test Case and Measurement Sections were performed at the laboratory described on page 2. Unless otherwise specified, during all tests following conditions applied: - All applicable tests were performed in label side upward. - With sealing compound material, see component list for the details. - The highest load declared by manufacturer used. Unless otherwise specified, tests were performed on model MDC-120-1400 and MDC-120-4450 to represent other similar models.