Features Technaxx Smart Watch TX 26 * User Manual The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in bottom bar Konformitätserklärung ) Before using the device the first time, read the user manual carefully. Everything you need for modern communication you wear from now on your wrist! Control of daily operations by APPs, e.g. pedometer, smartphone location Wireless connection to most Bluetooth devices Synchronization of your personal contact list Photo trigger function, time display, alarm function, weather forecast Built-in microphone for audio recording Music control to your Smartphone over the Smart Watch Notification of incoming emails, calls and messages Supports social networks (e.g. Twitter, Facebook) Measures quality of sleep and supports the learning process to have a better sleep Display with backlight Protected against splashing water, dirt, dust, light rain, snow (IP52) Versatile and low battery consumption Sporty and elegant design Button Description Power (ON/OFF) Mic (Microphone) Home (Button)
1. Charging the built-in battery Insert the end with magnet to the metal contacts on the back of the watch and insert the other end with the USB connector to the USB interface of a computer. NOTICE: only (!) use the enclosed USB charging cable. While the watch is charging you feel a vibration and you see a battery icon on the display. 2. Power ON / OFF To power the watch ON, press and hold the POWER button for about 2 seconds, un til you feel a bit vibration. The Technaxx logo appears on the startup display. Then the Android-System will be started. To power the watch OFF, press and hold the POWER button for about 2 seconds and then tap on Power off to confirm.
3. Basic Operations 3.1. Home Screen By pressing the Home button (black button at the bottom right) you go to the start screen. By wiping with your fingertips across the screen, you can go to other menu pages (see 3.2.). At the clock screen slide up or down to change the type of the clock. There are 8 different types. 3.2. Turn over the page Wipe with your fingertips on the screen to flip over a page: the previous or next menu page. 3.3. Back to Home Screen If you want to go back to the Home screen after an applications (see 4.), press the HOME button (black button at bottom right).
4. Applications 4.1. Nextone Pedometer Count your walk steps and calories that your body consumed each day to monitor your daily physical activity. Note: Continous use of the Pedometer step counter may shorten the battery life. You are suggested to turn off the Pedometer when you are not exercising. 4.2. Weather Real-time weather forecast 4.3. Notifications Notifications of incoming calls, messages or SMS. 4.4. Smartphone tracking (Find The Phone) Find your Smartphone by letting it ring or vibrate. 4.5. Camera Remote control of the camera of your Smartphone to take a picture with self-timer.
Explanation of the symbols on the previous page Gallery Press this button to see a the pictures from your mobile Phone. Calculator Press this button to use the calculator. Call log (Call info) All call information can be seen here. Sound Recorder Press here to record sound. Calendar Use here to set or see your calendar. Settings Here you can set the following points: Bluetooth Vibrate Display Storage Language & Input File Manager Backup & Reset Date & Time About Smart Watch Contacts Ingenic Press here to search for you contacts saved in your mobile phone. SMS Outgoing & incoming SMS can be seen when you press Here. Music Press here to play your songs saved on your mobile Phone.
5. Pairing with your Smartphone Slide rightwards to display the menu and select Setting. Turn on the BLUETOOTH, and select your Smartphone from the device s list. Start Pairing : Tap with your fingertip on PAIR.
Tap with your fingertip on OK after pairing. 6. NextOne Sync Information, which are on your Smartphone, such as contact list / SMS / other message / etc can be synchronized with this watch by the application NextOne Sync. Before synchronization, first you need to install the application NextOne Sync on your Smartphone! 6.1. For iphone: (1) Access to the AppStore, (2) download NextOne Sync, (3) install it on your iphone, (4) and then proceed according to the tips on the screen. 6.2. For Android Smartphone: this following application NextOne Sync is only for Android phones. Install NextOne Sync APK on your Android Smartphone. The NextOne Sync is available at http://technaxx-europe.de/shop/enduser/432 0_IndroidSyncMobile.apk
Turn on Bluetooth, both in the watch and in your Smartphone, and then choose Scan on your Smartphone to search for the device to be paired. You find the device with the name Technaxx.0607-nc. Select it and press the button OK. Press Pair on the display of the watch. The devices are paired! Pair the watch with your Smartphone by Bluetooth.
After paring the watch with your Smartphone, you will be reminded to confirm with passkey, and then click OK, both on the watch and on your Smartphone. Run the application Nextone Sync in your Smartphone. The paired device should be listed. Click on the device, and then click OK to bind the watch and your Smartphone. Information will be synchronized. Tap the button MENU to display the menu, and then select Setting.
Click Sync Settings under the Setting and then check options on the list. During the sync process make sure, Bluetooth on your Smartphone and on the watch are paired. Quick SMS is used to set quick response to message.
Cancel Bonded is used to disconnect Bluetooth between your Smartphone and the watch. Do not (!) cancel the bond during the synchronization. If you want to use another Smartphone or another watch, you can cancel the bond at first. Notification Setting allows you to forward notification from other applications to your watch.
Clicking Setting can customize the notification. System Update shows the current application version.
7. Technical Specifications System Requirements (Operation Devices) ios and Android Smartphone [higher than ios 7.0 (iphone 4s & above) and Android 4.0]. Remote control: Can use watch remote mobile phone taking pictures, check the calls and Email-alerts (@-push), such as auto reply message. Wireless protocol: Bluetooth Smart Ready (supports Bluetooth 4.0 and compatible with other versions). MCU MIPS, JZ4775, 1.0GHz, low power consumption ROM / RAM 4 GB / 512 MB Display 3.9 cm (1.55 inch) TFT screen with LCD background Display resolution 240 x 240 pixel TP (Touch Point) Capacitive Touch (Single point touch) Compliant with Bluetooth 4.0 + EDR Bluetooth Bluetooth module typ BCM20715 Bluetooth transmitted power Class 2 Bluetooth transmission range ~ 10m (open field) Power 3.5V, Consumption: Stand-by 0.2mA, Operating 65 100mA Audio Built-in microphone Battery Lithium Polymer 290mAh battery Working time ~ 4.5 hours (Screen is lightening, Turn on Bluetooth); ~ 48 hours (normal use); Stand-by time ~ 5 7 days Sensor G-Sensor (MEMS motion sensor, L3G4200D) Keys 2 physical keys (1) ON/OFF/Reset, (2) Back Vibration Funktion Yes Grade of protection Splashing water, dirt, dust, light rain, snow (IP52) Shell material PC + ABS + SUS Storage temperature 20 C ~ +65 C Operating temperature 0 C ~ +50 C Weight / Dimensions 50 g (with watch strap) / (L) 26,0 cm (with watch strap) Watch only: (L) 5,8 x (W) 1,0 x (H) 4,2 cm Package Contents Smart Watch TX 26, USB charging cable, User Manual Software configuration Operation System Android 4.3 Notifications, Control mobile phone photographing, Control Play Music, Remote lock screen, File manager, System Applications Calendar, Clock, Calculator, Recorder, SMS receiving, Reject & reply with SMS, Weather forecast, Call reminder, Sync contacts, Settings Pedometer External application Phone Sync manager APP (Nextone Sync)
Watch User Interface Home screen Primary interface (Main menu) Settings menu Notifications screen Camera Remote Screen Music screen Phone call screen Pedometer 1. Standard watch display 2. No status bar 3. If the battery is low, show a battery icon in the middle of screen 4. Scroll left/right gives access to Main menu 5. Scroll up/down gives access to different Watch-faces Quick Setting, Clock (Home screen), Notifications, Camera, Weather, Remote control, Pedometer Simplify menu Will show not answered phone calls, social applications, text messages Synchronous display content of the Smartphone camera, touch the screen of the watch equals the camera shutter button Switch songs Reject / answer / SMS reply Counting your steps Hints for Environment Protection: Packages materials are raw materials and can be recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device. Important Notice: Should battery fluid leak from a battery, wipe the battery-case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.m., Germany