LM0 Bluetooth Serial Adapter SMA Antenna Features The can communicate with another Bluetooth serial adapter or Bluetooth devices such as laptops, desktops, PDA s or mobile phones. Supports Bluetooth Serial Port Profile (SPP) and Bluetooth Generic Access Profile (GAP). No mains power cable is needed as the adapter can also be powered from the RS Pin 9. Unique Patented Firmware enabling Serial Printer funtionality. 00m (9 feet) range with standard dbi Antenna. Alternative antenna s enable a range up to 000m. Ability to transfer DTR, DSR, RTS and CTS line status over the air, providing a true Serial Cable replacement solution. This functionality allows serial printers using DSR or CTS line for error reporting, to report errors such as Out of Paper or Printer Offline. Multiple power supply options, AC Mains via Mini USB, USB-Mini USB. DTR DSR Handshaking and RTS CTS Flow Control options available, depending on the configuration. CSR Bluecore chipset. Overview LM0 Bluetooth Serial Adapter provides RS cable replacement for devices which use RTS/CTS flow control or DTR DSR Handshaking.This is a Class Bluetooth adapter with external antenna and can operate up to a range of 00m with standard antenna ( dbi) and up to 000m with optional antenna (LM dbi, LM dbi, LM 9 dbi) and also magnetic base (LM). LM Technologies Ltd provides a application called LM9 Configuration Software which allows easy configuration of this adapter. Unlike other Bluetooth serial adapters in the market, LM s hardware and firmware combination acts as a true straight or twisted serial cable. LM Technologies Ltd also provides option to configure the adapter from console using an in-built menu system. This option may be required for a device which has just keyboard and screen such as cash register. Page of
LM0 Bluetooth Serial Adapter SMA Antenna Packaging Options SRP - Single Retail Pack 0-00 x Bluetooth Serial Adapter. x dbi Antenna. x DB9 male to female connector. x USB - mini USB Cable for power supply. x All in one power supply (UK, EU and US). Optional LM0 Slim Line 9 pin to pin Convertor. TRP - Twin Retail Pack 0-00 x Bluetooth Serial Adapters. x dbi Antenna s. x DB9 male to female connector. x USB mini USB Cable for power supply. x All in one power supply (UK, EU and US). Optional LM0 Slim Line 9 pin to pin Convertor. AO - Adapter Only 00-000 x Bluetooth Serial Adapter. x dbi Antenna. User Guides, Manuals and Widcomm Configuration Software available to download via our website - http://www.lmtechnologies.com/support/downloads General Specification Baud Rate Coverage Connection Signal RS- Interface Standard Bluetooth Frequency Hopping Modulation Tx Power RX Sensitivity Antenna Antenna Gain Power Supply Current Consumption Operation Temperature Dimensions./././9./9././././0./0./9. Kbps Up to 00m (with default dbi Antenna) Point-to-Point TxD, RxD, DTR, GND, RTS and CTS. D_SUB 9 pin female Specification.0 + EDR.00 to. GHz Adaptive Frequency Hopping rate of,00/sec, Mhz channel space GFSK-Mbps, DQPSK- Mbps, and -DPSK-Mbps Max dbm (Class ) - dbm typical External SMA Antenna dbi Antenna (default) + to V DC Max 0 ma -0 C to + C mm (W) x mm (D) x mm (H) Page of
LM0 Bluetooth Serial Adapter SMA Antenna Signals Female DB9 9 Pin out for LM0v Adapter Pin RS Signal DTE to DCE Direction DCE to DTE Direction Description CD Not Connected RxD Receive Data TxD Transmit Data DTR Data Terminal Ready GND n/a n/a Signal Ground DSR Data Set Ready RTS Request to Send CTS Clear to Send 9 Vcc Power Supply Factory Settings The factory settings of the COM Port are as follows: Baud Rate Data Bits Parity Stop Bits Flow Control 900 bps None None Customised settings are available as factory settings upon special request; Bonding, Pre-Pairing, different Baud Rates, Data Bits, Parity and Flow Control Settings. Page of
Bluetooth Serial Adapter SMA Antenna Hardware Structure Link LED. Data LED. Power LED. RS Connector. Slide Switch. Mini USB Connector. Reset Button. Antenna Connector. Switch Functions Reset Button By pressing the Reset Button you can: Disconnect a wireless connection (after a short press). Restore the factory settings (after over seconds press). Slide Switch The slide witch can swap TxD/RxD, RTS/CTS signals. By switching, you can set the adapter as a DTE (towards antenna connector) or a DCE (towards RS connector). Additional Dimensions mm mm mm Page of CFG mm
Bluetooth Serial Adapter SMA Antenna Revision History.0 /NOV/0 First version with new layout. 0/MAR/0 Some minor changes in data sheet content. /FEB/0. Packaging information corrected. Revision information added. /NOV/0 Revision to documentation. /DEC/0 New Datasheet Page of