Desh Polytechnic College Mirpur-11, Dhaka-1216 Class Routine: 5th Semester (Civil Technology-64)

Similar documents
Industrial Maintenance Technology

Electrical Technology

SVKM S NMIMS Mukesh Patel School of Technology Management & Engineering BTI 1

Orifice Flow Meter

Exam Date Day Sub. Code / Name Monday 14PCD201 / DESIGN FOR MANUFACTURE ASSEMBLY AND ENVIRONMENTS

Electrical Technology (ELT)

03 October Day Date Subjects. Wednesday 14 November 2018 Mathematics-I. Friday 16 November 2018 Programming for Problem Solving

(Timings: 2.00 pm pm)

K.L.S. GOGTE INSTITUTE OF TECHNOLOGY, BELAGAVI

Office of the Controller of Examination KAMLA NEHRU INSTITUTE OF TECHNOLOGY SULTANPUR (U.P.)

Second Year B. Tech. Civil Engineering (SYBT) - Semester I (Pattern 2017)

Microcomputer Applications in Structural Engineering

ON DEMAND RESULT SEP. - OCT. 2017

SCHEME OF INSTRUCTION FOR B.E. (CIVIL ENGG) FOR 8 SEMESTERS

Electrical Technology (ELT)

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN

(Formerly University of Pune) INSTRUCTIONS FOR CANDIDATES

SATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)

PLC Fundamentals. Module 2: Hardware and Terminology. Academic Services Unit PREPARED BY. August 2011

University of Pune. Structure of S E Civil Engineering Course. Semester I. Teaching Scheme Hours per week

SAI NATH UNIVERSITY,JHARKHAND EXAM TIME-TABLE DECEMBER 2018

OFFICE ADMINISTRATION (OAD) PROGRAM INFORMATION PROCESSING OPTION CIP: Associate in Applied Science (AAS) Degree Course Requirements by

ELECTRICAL SAFETY INSPECTION REPORT

ENGINEERING TECHNOLOGY (A.S.)

Electrical Systems Technology

Al-FALAH UNIVERSITY (University with NAAC A Grade Accredited Institutions) Faridabad (Haryana)

TMS1122: Chemistry of Materials

ENGINEERING PHYSICS CURRICULUM GUIDE

27/05/2016 Friday AN5102: Advanced Digital System Design 06/06/2016 Monday MA5131: Applied Mathematics for Electronics Engineers

KHENTAWAS, FARRUKHNAGAR, GURGAON, HR DATESHEET PRE-UNIVERSITY EXAMINATION NOVEMBER 2018 HSMC-ENG-101G ENGLISH

Process for Issuing Transcription Form

DEPARTMENT OF ELECTRICAL/ELECTRONIC ENGINEERING

COLLEGE OF ENGINEERING TECHNOLOGY

Automation Interface Requirements for System I/O Interface of a DPC I Welding System

SCIENCE, TECHNOLOGY, ENGINEERING TECH, & MATH

The Institution of Engineers (India) A.M.I.E

Electronics Engineering Technology

Faculty of Mechanical Engineering B.E. Mechanical and Automation Engineering (R 2013) Semester III CE6461 Fluid Mechanics and Machinery Laboratory - I

Cluster (Engineering- 72 SBMCs) Engineering 1. Cluster (Business Management- 30 SBMCs) Business Management 2

Skills and Opportunities in the Defence Industry and Advanced Manufacturing. tafesa.edu.au/defence-industries

Introduction to ICS Security

Review of Engineering Fundamentals CIVL 4197

College of Computing, Engineering & Construction Electrical Engineering Course Descriptions

Controller and Drivers

B.E Civil Engineering Program Outcomes (POs) At the end of the B.E program, students are expected to have developed the following outcomes.

Improving the Senior Level Hydraulic Engineering Design Course (CE 474) By Means of Computer Assisted Instruction

California State Polytechnic University, Pomona Degree Curriculum Sheet. Total. Elective Subplan/Option Support. Total

TOTAL HOURS REQUIRED:

Engineering Technology Credit Transfer: MPTC Associate Degree to UWGB Bachelor s Degree

Department of Mechanical Engineering Faculty Profile

Introduction to latest innovation in advanced industrial instrumentation UNIT 6 BASIC INSTRUMENTATION

Design of a Low Cost Trainer for Flow Control

Structural Engineering Sample Questions And Solutions By Ncees

Workforce Career Pathway Program

List of Electives M.TECH.III Sem.

List of Electives M.TECH.III Sem.

Shipbuilding training and career opportunities at TAFE SA. tafesa.edu.au

Surveying Prof. Bharat Lohani Indian Institute of Technology, Kanpur. Lecture - 1 Module - 6 Triangulation and Trilateration

REVISED RESULT - DECEMBER, 2014 SEMESTER : 7 PROGRAMME : BACHELOR OF TECHNOLOGY (COMPUTER SCIENCE AND ENGINEERING)

AutoCAD Civil 3D 2008 SURVEY

New Zealand Diploma in Engineering (Level 6) (Version 2.0)

Electrical Engineering

08/06/ /06/ /06/ /06/ /06/ /06/ /06/ /06/2018

Seychelles Institute of Technology (SIT) Tel , Fax ,

Module Title: Microprocessor Systems 2

Integration of CAE Tools for Complete System Prototyping EASY5 User Conference May, 2000 Presented by: Joel Tollefson

Drives Motors and PLCs

A course entitled. Particle counting to ISO Parts 1& 2

GOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Mechanical Engineering COURSE PLAN

[GREEN JOB PROGRAMS AT CLC]

The GDP growth rate is expected to remain high in both India and Indonesia, major markets in the region.

PLC. Module 3: Hardware and Terminology. IAT Curriculum Unit PREPARED BY. Jan 2010

Business Intelligence

II Semester B.E. SEE Exam Time Table

Course work includes mathematics, natural sciences, engineering sciences and technology.

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD PG Courses offered with eligibility Criteria for the Academic year

Electronic Technology

Academic Course Description

7. STUDY AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME IN COMPUTER ENGINEERING (J&K) Total No Assessment

ACER. Automation for sliding gates

New Zealand Diploma in Engineering

Fig. 1. Fig. 1. on the Standard Views toolbar. SolidWorks ASSEMBLY AIRPLANE Page 8-1

MTL SmartPlant symbol library for FOUNDATION fieldbus components. Measurement Technology Limited is a member of The MTL Instruments Group plc

SIPROTEC 5 Application Note

Department of Civil Engineering Faculty Profile

California State Polytechnic University, Pomona Degree Curriculum Sheet. Required Support Courses. Total Units

Surveying Laboratory

Lukasz Zwalinski PH/DT

Finding Perimeter and Area with Coordinates

MODEL 9250 Preliminary data sheet

Mining Engineering Technician: Speciality Mine Exploitation

(a) Barometric levelling (b) Trigonometric levelling (c) Spirit levelling [16]

ph/orp 300 (Cat. No ) MICROCOMPUTER BASED OPERATION MANUAL ph /ORP/ Temperature CONTROLLER Phone: , Fax:

VDOT Small Business Enterprise Program Approved Consultants

Maintenance & Reliability elearning Training Curriculum

UNIVERSITY OF MUMBAI No. UG/24 of

6 See List A College Requirements (CR) 32 See list B College Electives (CE) 3 See list C Departmental Requirements (DR)

MBA Tech Subjects. (All Branches)

Advanced Systems Technology Program

DEPARTMENT OF INSTRUMENTATION AND CONTROL ENGINEERING VISION

Transcription:

Class Routine: 5th Semester (Civil Technology-64) Foundation Engineering (6451) Accounting (5851) All R-408(XYZ) Engineering- 1 (6453) Foundation Engineering (6451) Accounting (5851) All R-408(XYZ) Engineering-1 (6453) Construction Process-2 (6455) 5 th CT+Arch R-408() Surveying-3 (6452) R-408() R-408() Surveying-3 (6452) R-408() Management (5840) 5 th CT+CMT Foundation Engineering (6451) Engineering-1 (6453) Management (5840) +CMT Construction Process- 2 (6455) R-408() R-408() Surveying-3 (6452) R-408() Surveying-3 (6452) R-408()

Class Routine: 7th Semester (Civil Technology-64) DPC Phone: 01910044990-7 R-308() Eng-2 (6472) R-308 () Transportation -2 (6473) R-308 () Water- Resource (6475) R-308() Transportation -2 (6473) R-308 () Water- Resource (6475) Transportation -2 (6473) R-308 () Eng-2 (6472) R-308 () R-308() Civil Engineering Project (6476) R- (308) R-308() Water- Resource (6475) Eng-2 (6472) R-308 ()

Class Routine: 5th Semester (Architecture Technology-64) DPC Phone: 01910044990-7 Design & Planing-4 (6151) Book Keeping & Accounting (5851) R--408(XYZ) All Tech Structural Mechanics (6433) Engineering-1 (6453) R 408 () Accounting (5851) R--408(XYZ) All Tech Working Drawing (6152) History Of Architecture (6153) Structural Mechanics (6433) Engineering-1 (6453) R--408() Construction Process- 2 (6455) R--408() History Of Architecture (6153) Structural Mechanics (6433) R 408 () Surveying-2 (6443) Design & Planing-4 (6151) Design & Planing-4 (6151) R--408() Engineering-1 (6453) R--408() R 408 () Surveying-2 (6443) Surveying-2 (6443)

Class Routine: 5th Semester (Electrical Technology-67) Applied Mechanics (7043) Accounting (5851) (All) R--408(XYZ) Electrical & Electronics Measurement-1 (6753) Industrial Power Electronics (6855) Industrial Power Electronics (6855) Hydraulic Machinery (7046) Accounting R--408(All) (XYZ) Industrial Power Electronics (6855) Generation Of Electrical Energy (6751) D.C Machine (6752) Applied Mechanics (7043) Generation Of Electrical Energy (6751) Generation Of Electrical Energy (6751) Industrial Power Electronics (6855) Generation Of Electrical Energy (6751) Industrial Power Electronics (6855) D.C Machine (6752) Hydraulic Machinery (7046) Hydraulic Machinery (7046) Electrical & Electronics Measurement-1 (6753) D.C Machine (6752) Applied Mechanics (7043) Electrical & Electronics Measurement-1 (6753) Electrical & Electronics Measurement-1 (6753)

11/A, 3/1, Pallabi, Mirpur Dhaka-1216 Class Routine: 7th Semester (Electrical Technology-67) DPC Phone: 01910044990-7 Instrumentation Process Control (6863) TDEE-2 (6774) R- 406 () Instrumentation Process Control (6863) R- 406 ( Programming C (6659) R-406 (RI) A.C. Machine-2 (6771) Switch Gear & Protection (6773) Instrumentation Process Control (6863) Electrical Engineering Project (6772) Programming in C R-402 (RI) TDEE-2 (6774) R- 406 () A.C. Machine-2 (6771) Switch Gear & Protection (6773) A.C. Machine-2 (6771) Instrumentation Process Control (6863) A.C. Machine-2 (6771) Switch Gear & Protection (6773) R- 406 () TDEE-2 (6774) R- 406 () Programming C (6659) R-406 (RI) TDEE-2 (6774) R- 406 () Switch Gear & Protection (6773) Programming C (6659) Instrumentation Process Control (6863)

11/A, 3/1, Pallabi, Mirpur Dhaka-1216 Class Routine: 5th Semester (Computer Technology-66) DPC Phone: 01910044990-6 Programming Language-3 Accounting Microprocessor & Database management System (5851) Microcomputer-1 R-408(All) (6651)(RI) R -405 (SA) (XYZ) Accounting (5851) R-408(All) (XYZ) Management (5840) Database management System Web Design (8551) Programming Language-3 R -405 (SA) Database management System Microprocessor & Microcomputer-1 (6651) R-405 (RI) Management (5840) Programming Language-3 R -407 (SA) Web Design (8551) Programming Language-3 R -407 (SA) Database management System Microprocessor & Microcomputer(RI)(405) Microprocessor & Microcomputer-1 (6651) R-405 (RI)

11/A, 3/1, Pallabi, Mirpur Dhaka-1216 Class Routine: 7th Semester (Computer Technology- (66) DPC Phone: 01910044990-6 R-305 (RI) Data Communication & Network-2 R-305 (RI) System Analyses & Design (6672) R-402 (SA)SSS R-402 (RI) Industrial Management-5852 R-305 (SHS) System Analyses & Design (6672) R-305 (SA) Embedded System & PLC (6671) R-305 (SA) R-305 (RI Data Communication & Network-2 R-305 (RI Industrial Management (5852) R-305 (SHS) Embedded System & PLC (6671) R-402 (SA) Data Communication & Network-2 Embedded System & PLC (6671) R-402 (SA) System Analyses & Design (6672) R-402 (SA) Data Communication & Network-2 R-305 (RI) Computer Engineering Project (6674) R-407 (SA)