Weight increments for deadweight testers P3000 Pneumatic Deadweight Tester High performance gas deadweight tester, with unique suspended piston design for vacuum calibration. P300 Hydraulic Deadweight Tester Highly accurate oil deadweight tester, with quick and easy-to-use single and dual piston deadweight models. Deadweight testers use a precision piston-gauge system consisting of a vertically mounted piston and cylinder assembly, and accurately calibrated weight masses that are loaded onto the piston. Weight sets are available in a variety of units of measure, such as psi, inh₂o or MPa, and are calibrated to match a specific deadweight tester. For example, the P3-BAR is a weight set that that matches the P3 deadweight tester and the weight increments are in units of bar. The tables in this document indicate the pressure increments found in each weight set that ships with a new deadweight tester, and the quantity of each weight. The tables also apply to conversion weight sets, which provide additional units of measure without purchasing an additional deadweight tester. On certain deadweight testers, a fine increment weight set is also available. This is useful when calibrating a wide range of devices by allowing for more discrete pressure set points. These smaller weights supplement the larger weights to produce fine incremental pressures. P300 Hydraulic Deadweight Tester Hydraulic deadweight tester specially designed to use water as a test medium.
Single piston oil units P3-BAR to 3 bar P3-KGCM to 3 kgf/cm P3-PSI 0 to 00 psi P3-MPA 0. to 3. MPa P3-KPA 00 to 300 kpa Wt Carrier 0 0. 00 0. 0. 0. 0. 0 0 00 0.0 0.0 0. 0. 0 0 00 00 Fine 0.0 0.0 0.0 P3-BAR to 0 bar 0.0 0.0 0.0 P3-KGCM to 0 kgf/cm 0. 0. 0. P3-PSI 0 to 000 psi Wt Carrier 0 0. 0. 0. 0. 0 P33-BAR 0 to 30 bar 0. 0. 0. 0 P33-KGCM 0 to 30 kgf/cm 0 0 00 00 P33-PSI 00 to 000 psi Wt Carrier 0 0 00 0 0 0 0 0 0 00 00 000 0.00 0.00 0.00 P3-MPA 0. to MPa 0.0 0.0 0.0 0. 0. P33-MPA to 3 MPa 0. 0. Fine 0. 0. 0. 0. 0. 0. 0.0 0.0 0.0 Fluke Calibration Weight increments for deadweight testers
Single piston oil units cont. P3-BAR 0 to 700 bar P3-KGCM 0 to 700 kgf/cm P3-PSI 00 to 0,000 psi P3-MPA to 70 MPa Wt Carrier 0 0 00 Fine 0 0 00 0. 0. P3-BAR 0 to 00 bar 0 0 00 0. 0. P3-KGCM 0 to 00 kgf/cm 0 00 00 000 000 0 P3-PSI 00 to,000 psi 0. 0 0.0 0.0 0. P3-MPA to 0 MPa Wt Carrier 0 0 00 Fine 0 0 0 00 0. 0. P3-BAR 0 to 00 bar 0 0 0 00 0. 0. P3-KGCM 0 to 00 kgf/cm 7 0 00 00 000 000 0 P3-PSI 00 to 0,000 psi 0 0. 0 0.0 0.0 0. P3-MPA to 0 MPa Wt Carrier 0 0 00 3 0 0 00 3 0 0 00 9 0 00 00 000 000 3 0. 0 Fine 0. 0. 0. 0. 0 0.0 0.0 0. 3 Fluke Calibration Weight increments for deadweight testers
Dual piston oil units P33-BAR to 30 bar P33-KGCM to 30 kgf/cm P33-PSI 0 to 000 psi P33-MPA 0. to 3 MPa Wt Carrier /0 /0 0/00 0./ Fine 0./ 0./ /0 /0 0.0/0. 0.0/0. 0.0/0. P3-BAR to 700 bar 0./ 0./ /0 /0 0.0/0. 0.0/0. 0.0/0. P3-KGCM to 700 kgf/cm /0 /0 0/00 0/00 00/000 0./ 0./ 0./ P3-PSI 0 to 0,000 psi 0.0/0. 0.0/0. 0./ 0./ 0.00/0.0 0.00/0.0 0.00/0.0 P3-MPA 0. to 70 MPa Wt Carrier /0 /0 0/00 0./ Fine 0./ 0./0 /0 /00 0.0/0. 0.0/0. 0.0/ P3-BAR to 00 bar 0./ 0./0 /0 /00 0.0/0. 0.0/0. 0.0/ P3-KGCM to 00 kgf/cm /0 /00 0/00 0/000 00/000 0./ 0./ 0./0 P3-PSI 0 to,000 psi 0.0/0. 0.0/ 0./ 0./0 0.00/0.0 0.00/0.0 0.00/0. P3-MPA 0. to 0 MPa Wt Carrier /0 /0 0/00 0./ 0 0./ 0./0 /0 /00 0 0./ 0./0 /0 /00 7 /0 /00 0/00 0/000 00/000 0 0.0/0. 0.0/ 0./ 0./0 Fine 0.0/0. 0.0/0. 0.0/ 0.0/0. 0.0/0. 0.0/ 0./ 0./ 0./0 0.00/0.0 0.00/0.0 0.00/0. Fluke Calibration Weight increments for deadweight testers
Single piston water units P3-BAR to 3 bar P3-KGCM to 3 kgf/cm P3-PSI 0 to 00 psi P3-MPA 0. to 3. MPa P3-KPA 00 to 300 kpa Wt Carrier 0 0. 00 0. 0. 0. 0. 0 0 00 0.0 0.0 0. 0. 0 0 00 00 Fine 0.0 0.0 0.0 P33-BAR 0 to 30 bar 0.0 0.0 0.0 P33-KGCM 0 to 30 kgf/cm 0. 0. 0. P33-PSI 00 to 000 psi 0.00 0.00 0.00 P33-MPA to 3 MPa Wt Carrier 0 0 00 Fine 0 0 0. 0. 0. P3-BAR 0 to 700 bar 0 0 0. 0. 0. P3-KGCM 0 to 700 kgf/cm 0 0 00 00 000 P3-PSI 00 to 0,000 psi 0. 0. 0.0 0.0 0.0 P3-MPA to 70 MPa Wt Carrier 0 0 00 0 0 00 0 0 00 0 00 00 000 000 0. 0 Fine 0. 0. 0. 0. 0 0.0 0.0 0. Fluke Calibration Weight increments for deadweight testers
Dual piston water units P33-BAR to 30 bar P33-KGCM to 30 kgf/cm P33-PSI 0 to 000 psi P33-MPA 0. to 3 MPa Wt Carrier /0 /0 0/00 0./ 0./ 0./ /0 /0 0./ 0./ /0 /0 /0 /0 0/00 0/00 00/000 0.0/0. 0.0/0. 0./ 0./ Fine 0.0/0. 0.0./0. 0.0/0. 0.0/0. 0.0/0. 0.0/0. 0./ 0./ 0./ 0.00/0.0 0.00/0.0 0.00/0.0 P3-BAR to 700 bar P3-KGCM to 700 kgf/cm P3-PSI 0 to 0,000 psi P3-MPA 0. to 70 MPa Wt Carrier /0 /0 0/00 0./ 0./ 0./0 /0 /00 0./ 0./0 /0 /00 /0 /00 0/00 0/000 00/000 0.0/0. 0.0/ 0./ 0./0 Fine 0.0/0. 0.0/0. 0.0/ 0.0/0. 0.0/0. 0.0/ 0./ 0./ 0./0 0.00/0.0 0.00/0.0 0.00/0. Fluke Calibration Weight increments for deadweight testers
Single piston gas units P30--KPA. to 00 kpa P30--MBAR to 000 mbar P30-7-INHO to 00 inh O Wt Carrier. 0. 0 0 P303--KPA 3 to 00 kpa 0 0 00 00 P303--MBAR 30 to 000 mbar 7 0 80 P303-7-INHO to 800 inh O Wt Carrier 3 30 0 0 P30--BAR 0. to 0 bar 0 0 0 00 00 P30--KGCM 0. to 0 kgf/cm 7 0 80 0 P30-3-PSI 3 to 0 psi P30--KPA 0 to 000 kpa P30--MPA 0.0 to MPa Wt Carrier 0. 0. 3 0 0.0 0. 0. 0. 0. 0 0 0 0 00 00 0.0 0.0 0. 0. Fine 0.0 0.0 0.0 P30-BAR and -P 0. to 3 bar 0.0 0.0 0.0 P30-KGCM and -P 0. to 3 kgf/cm 0. 0. 0. P30-PSI and -P 3 to 00 psi P30-KPA and -P 0 to 300 kpa 0.00 0.00 0.00 P30-MPA and -P 0.0 to 3. MPa Wt Carrier 0. 0. 3 0 0.0 0. 0. 0. 0. 0 0 00 0 0 00 00 0.0 0.0 0. 0. Fine 0.0 0.0 0.0 0.0 0.0 0.0 0. 0. 0. 0.00 0.00 0.00 7 Fluke Calibration Weight increments for deadweight testers
Single piston liquid lubricated gas units P303-BAR to 70 bar P303-KGCM to 70 kgf/cm P303-PSI 0 to 000 psi P303-KPA 00 to 7000 kpa P303-MPA 0. to 7 MPa Wt Carrier 0 00 0. 3 0. 0. 0. 0 P303-BAR to 0 bar 3 0. 0. 0. 0 0 0 00 00 P303-KGCM P303-PSI to 0 kgf/cm 0 to 000 psi 3 0 0 0 00 00 000 P303-KPA 00 to,000 kpa 3 0.0 0.0 0.0 0. 0. P303-MPA 0. to MPa Wt Carrier 0 00 0. 0. 0. 0. 0 0. 0. 0. 0 0 0 00 00 0 0 0 00 00 000 0.0 0.0 0.0 0. 0. 8 Fluke Calibration Weight increments for deadweight testers
Dual piston gas (pressure and vacuum) units (includes vacuum only units) (P) P30-KPA and -P. to 00 kpa P30-MBAR and -P to 000 mbar P30-INHO and -P to 00 inh O Wt Carrier. 0. 0 0 0 0 00 00 7 0 80 Range (V) 3 to 00 kpa 30 to 000 mbar to 30 inhg Wt Carrier 3 30 (P) 0 0 0 P303-KPA and -P 3 to 00 kpa 0 0 0 00 00 00 P303-MBAR and -P 30 to 000 mbar 0. 0. 0 P303-INHO and -P to 800 inh O Wt Carrier 3 30 0 0 0 0 0 00 00 7 0 80 0 Range (V) 3 to 00 kpa 30 to 000 mbar to 30 inhg Wt Carrier 3 30 0 0 0 0 0 0 00 00 00 0. 0. 0 9 Fluke Calibration Weight increments for deadweight testers
Dual piston gas (pressure and vacuum) units (includes vacuum only units) cont. (P) P30-BAR and -P 0. to 3 bar P30-KGCM and -P 0. to 3 kgf/cm P30-PSI and -P 3 to 00 psi P30-KPA and -P 0 to 300 kpa P30-MPA and -P 0.0 to 3. MPa Wt Carrier 0. 0. 3 0 0.0 Fine 0. 0. 0.0 0.0 0.0 0. 0. 0.0 0.0 0.0 0 0 00 0. 0. 0. 0 0 00 00 0.0 0.0 0. 0. Range (V) 30 to 000 mbar 0 to 70 mmhg to 30 inhg 3 to 00 kpa 3 to 00 kpa Wt Carrier 30 0 3 3 Vacuum only instruments 0 0 0 00 00 00 P30-KPA and -P 3 to 00 kpa 0 0 0 00 00 00 P30-MBAR and -P 30 to 000 mbar 0. 0. 0 P30-INHG and -P to 30 inhg 0 0 0 P30-MMHG and -P 0 to 70 mmhg Wt Carrier 3 30 0 0 0 0 0 0 0 00 00 00 0. 0. 0 0 0 0 00 00 00 0.00 0.00 0.00 0 0 0 0 Fluke Calibration Weight increments for deadweight testers
High pressure, single piston oil units P3830-BAR 0 to 000 bar P3830-PSI 00 to 30,000 psi P3830-MPA to 00 MPa Wt Carrier 0 00 Fine 9 0 0 00 00 0. 0. P380-BAR 0 to 00 bar 8 0 00 00 000 000 3000 0 P380-PSI 00 to 0,000 psi 9 0. 0 0 0.0 0.0 0. P380-MPA to 0 MPa Wt Carrier 0 00 Fine 0 0 00 00 0. 0. P380-BAR 0 to 000 bar 0 00 00 000 000 3000 0 P380-PSI 00 to 0,000 psi 0. 0 0 0.0 0.0 0. P380-MPA to 00 MPa Wt Carrier 0 00 9 0 0 00 00 8 0 00 00 000 000 3000 9 0. 0 0 Fine 0. 0. 0 0.0 0.0 0. Fluke Calibration Weight increments for deadweight testers
JJG9-007 specification oil units P3-MPA-CN 0. to 3. MPa P3--MPA-CN 0. to MPa P33--MPA-CN to 3 MPa Wt Carrier 0. 0. Fine 0.0 0.0 0. 0. 0. 0.00 0.00 0.00 P3--MPA-CN to 70 MPa 0.0 0.0 0.0 0. 0. P3--MPA-CN to 0 MPa 0. 0.. 0.0 0.0 0.0 P3--MPA-CN to 0 MPa Wt Carrier 0. 0 0 0. 0 3 0. 0 0.0 0.0 0. P33--MPA-CN 0. to 3 MPa 0.0 0.0 0. P3--MPA-CN 0. to 70 MPa 0.0 0.0 0. P3--MPA-CN 0. to 0 MPa Wt Carrier 0./ 0./ 0./ 0.0/0. 0.0/0. 0./ 0./. 0./ 0.0/0. 0.0/ 0./ 0./ 0./0 0 0.0/0. 0.0/ 0./ 0./ 0./0 Fine 0.00/0.0 0.00/0.0 0.00/0.0 0.00/0.0 0.00/0.0 0.00/0. 0.00/0.0 0.00/0.0 0.00/0. Fluke Calibration. Precision, performance, confidence. Fluke Calibration PO Box 9090, Everett, WA 980 U.S.A. Fluke Europe B.V. PO Box 8, 0 BD Eindhoven, The Netherlands Fluke Calibration Weight increments for deadweight testers For more information call: In the U.S.A. (877) 3-3 or Fax () - In Europe/M-East/Africa +3 (0) 0 7 00 or Fax +3 (0) 0 7 In Canada (800)-3-FLUKE or Fax (90) 890-8 From other countries + () -00 or Fax + () - Web access: http://www.flukecal.com 0-0 Fluke Calibration. Specifications subject to change without notice. Printed in U.S.A. /0 0909d-en Pub-ID 33-eng Modification of this document is not permitted without written permission from Fluke Calibration.