Xitanium LED driver Datasheet Xitanium FULL Prog LED Xtreme drivers Xitanium FULL Prog LED Xtreme drivers Philips Xitanium Full Prograable LED drivers are specifically designed to deliver the highest performance, protection and configurability. The portfolio offers both central and standalone diing protocols further increasing the energy savings and O2 reductions achieved with LED lighting. The Xtreme technology ensures maximum robustness and protection combined with a very long lifetime. In this product family Philips introduces new drivers in a compact form factor with state-of-the-art features, which offer high value for both OEM customers and end-users. The products can replace the existing prograable outdoor LED drivers and will bring significant improvement in prograing, assembly into a luminaire and electrical performance. enefits Features Application Ultimate robustness, offering peace of mind and lower High surge iunity (M/DM) Road and street lighting Long lifetime and robust protection against moisture, vibration and temperature Area lighting onfigurable operating windows (AO) Tunnel lighting Multiple control interfaces: DALI, AmpDim, 1-step and 3-step LineSwitch Industrial lighting maintenance costs Fully prograable LED-drivers designed for the new digital and connected lighting world Extended diagnostics via MultiOne Autonomous diing via integrated DynaDier Easy to design-in, configure and install for insulation lass Adjustable thermal protection for driver (DTL) and LED module (MTP) I and lass II applications Energy savings through high efficiency and via multiple diing options onstant Light Output (LO) Adjustable Start-up Time (AST) Adjustable Light Output (ALO) End-Of-Life indicator (EOL)
Electrical input data Rated input voltage range 202...254 Vac Performance range Rated input voltage 230 Vac Rated input frequency range 47...63 Hz Performance range Rated input current 0.34 A Max. input current 0.4 A @ rated output power @ minimum performance input voltage Rated input power 84 W Power factor 0.99 Total harmonic distortion 8 Efficiency 91.5 Rated input voltage D range 186...250 Vdc Performance range Rated input current D range 0.48 Adc Performance range Input voltage A range 198...264 Vac Operational range Input frequency A range 45...66 Hz Operational range Input voltage D range 168...275 Vdc Operational range Standby Power (TD) 0.45 W Isolation input to output Electrical output data Regulation method onstant urrent Output voltage 50...150 Vdc Output voltage max. 220 V Peak voltage at open load Output current 0.05...0.7 A Full output current setting Output current min prograable 200 ma Output current min diing 50 ma Output current tolerance ±3 Output current ripple LF 4 Output current ripple HF 4 Output power 2.5...75 W Full output ontrol method AmpDim, DALI, Dynadier, Ripple = peak / average Electrical data controls input Output current amplitude diing LineSwitch single-step Diing range 10...100 Galvanic Isolation DALI acc. IE62386-101, -102 Ed. 2.0; LineSwitch: Vlow: < 160Vac Vhigh: 170... 264Vac Logistical data Product name Order code 871869675566200 Logistic code 12N 9290 014 08406 Pieces per box 12 2/9
Wiring & onnections Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid / stranded wire 16...24 AWG WAGO250 (3.5 ), solid / stranded wire Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid / stranded wire 16...24 AWG WAGO250 (3.5 ), solid / stranded wire Output wire strip length 8.5...9.5 Maximum cable length 600 Maximum NT output cable length 0.6 m Total length of wiring including LED module, one way Insulation Insulation Mains Mains EQUI LED + NT LineSwitch DALI NA EQUI LED + NT LineSwitch NA DALI 3/9
Dimensions and weight Length (A1) 133 Width (1) 77 Height (1) 40 Fixing hole diameter (D1) 4.5 Fixing hole distance (A2) 122.5 Weight 550 gram Operational temperatures and humidity Ambient temperature -40...+55 º Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 80 º Maximum temperature measured at Tcase-point Tcase-life 70 º Measured at Tcase-point Maximum housing temperature 130 º In case of a failure Relative humidity 10...90 Non-condensing Ambient temperature -40...+80 º Relative humidity 5...95 exceeded. Storage temperature and humidity 4/9 Non-condensing
Lifetime Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (AO) Prograable, SimpleSet See Design-in guide. Default output current: = 700 ma LED module temperature derating (MTP) Driver Temperature Limit (DTL) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) Diagnostics Adjustable Light Output (ALO) Ampdim LineSwitch single-step LineSwitch 3-step Adjustable Start-up Time (AST) Integrated Dynadier End Of Life indicator Default: AO = 15. EOFx = 10... 60 5-step, light turn-off possible Features Open load protection Short circuit protection Over power protection Hot wiring No Suitable for fixtures with protection class I and II per IE60598 Over temperature protection driver Overheating protection 5/9 Remark
ertificates and standards Approval marks / / E / EL / ENE Ingress Protection classification 20 Inrush current Inrush current Ipeak 43 A Input voltage 230V Inrush current Twidth 260 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 10 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current / protective conductor current Typical touch current (ins. lass II) < 0.28 ma peak Acc. IE61347-1. LED module contribution not included Typical protective conductor current (ins. lass I) < 0.2 ma rms Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 6 L-N, Ls-L, Ls-N, acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 10 L/N/Ls - EQUI 10 acc. EN61547; 8 acc. IE61000-4-5, 12 Ohm ontrol surge iunity (diff. mode) 0.9 DALI, acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 6 DALI - EQUI acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us DALI surge iunity (co. mode) 6 DALI - L/N/Ls acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Default setting Remark AO 700 ma LineSwitch ON LO OFF MTP ON Dynadier OFF EOL OFF 6/9 Surge iunity 1.2/50us,8/20us Additional information
Graphs Operating window Thermal Guard Mains Guard 7/9
Power factor versus output power Efficiency versus output power THD versus output power 8/9
2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. Note that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: September 12, 2017 v9 www.philips.com/technology