for Android & ios user guide read all safety warnings and cautions prior to using this product
Contents 3 Section 1: Safety 3 Warnings & Cautions Explained 3 Safety Warnings 4 Section 2: Product Overview 4 In the Box 4 Optional Accessories (Sold Separately) 5 Section 3: Getting Started 5 Downloading the Update Software 7 Updating the Motorcycle Vehicle Interface (MVI) 8 Downloading the Vigilante Application (APP) 8 Understanding the MVI LEDs 9 Section 4: Hardware Installation 10 Section 5: Using Vigilante 10 Pairing Bluetooth 11 The Main Menu - At a Glance 12 Understanding Parameter IDs (PIDs) 13 Display Options 14 Tuning 17 DTC Spy 17 Performance 18 Recording Logs 18 Calibrate Gear Indicator 19 Section 6: Warranty
Safety SECTION 1 Warnings & Cautions Explained Throughout this User Manual, you will see important messages regarding your safety or the protection of your motorcycle. These messages are designated by the words WARNING and CAUTION. The device you have purchased is a highperformance product. As such, it does present some risks of which you should be fully aware. Do not use this product until you carefully read the following safety information and the Owner Agreement. WARNING indicates a condition that may cause serious injury or death to you, your passengers or others nearby. Pay careful attention to these Warning messages, and always comply with them. They could save a life. CAUTION indicates a condition that could cause damage to your motorcycle. It is important to install and operate your product in conformance with the instructions in this Manual. Caution alerts you to particularly important things that will keep your motorcycle operating properly. Safety Warnings Always use your best judgment, and operate the motorcycle in a safe manner. Do not become distracted by the device while riding, and always be fully aware of all riding conditions. Minimize the amount of time spent viewing the device screen while riding. Do not operate the device while riding. Perform all adjustments or changes while stopped. Changing a setting while under way can interfere with your attention to roadway conditions. Do not exceed legal speed limits on public roadways. Use any enhanced speed capabilities of this product only in closed circuit, legally sanctioned racing environments expressly for this purpose. Loss of control from speeding on a public road could seriously injure you, your passengers, or others on the roadway. Some modifications may affect other parts of your vehicle. Be sure your tires and other components are rated for the increased speeds they will have to withstand. Not doing so can lead to loss of control. Always use and install the Superchips Vigilante in compliance with the instructions and manual provided 3
Product Overview SECTION 2 In the Box 3M 3M Motorcycle Vehicle Interface (MVI) USB cable for updating the MVI Velcro for fastening the MVI Zipties for fastening cables Motorcycle Sold Separately :) Optional Accessories (Sold Separately) Dual Wide-Band Oxygen (DBO2) Kit Mobile Handlebar Kit 4
Getting Started SECTION 3 Downloading the Update Software 1 Visit our website @ https://www.superchips.com 2 Highlight the Customer Support tab at the top of the web page. Select Download Product Update Software. 3 Click the Download button. 4 Select the Run button to start the installation process. NOTE: If you choose to Save the setup.exe file, you will need to locate the file you saved it to then double-click it to start the installation. 5
5 Click Next to view the License Agreement. 6 Read the License Agreement and check the I accept the terms in the license agreement if you agree. Then click Next. 7 Click the Change button if you would like to change the destination folder. Click Next to continue. 8 Click the Install button. 9 Click the Finish button to complete the installation. 6
Updating the Motorcycle Vehicle Interface (MVI) 1 Double-Click the Superchips Update icon located on your computer. 2 Click the text Click Here To Register. The Registration Form will appear. 3 Fill out the required information on the Registration Form (not shown). Each required field has an asterisk and must be filled in to continue. NOTE: The User Name and Password you input will be used to log in as described below. 4 Click the Submit button. 5 Return to the Log In menu screen as shown above, and enter the User Name and Password you provided on the Registration Form. 6 Click the Login button and wait for the My Account menu to appear. 7 Connect the MVI to your computer using the supplied USB cable. Computer with Internet Connection USB Cable MVI CAUTION: The MVI s USB port should NEVER be connected to if the MVI is plugged into the Motorcycle. NOTE: Once the MVI is plugged into your PC, the server will check to see what updates are available for your device. If a software update is available, the MVI will automatically update. 8 Disconnect the MVI from the computer after the Update Software states that it is safe to do so. 7
Downloading the Vigilante Application (APP) Android Users 1 Open the Google Play Store App on your device. 2 Search for Superchips Vigilante and choose to download the software. NOTE: Once the Vigilante App has finished installing, it may be opened in Demo Mode without having to be paired with the MVI. ios Users 1 Open the App Store on your device. 2 Search for Superchips Vigilante and choose to download the software. NOTE: Once the Vigilante App has finished installing, it may be opened in Demo Mode without having to be paired with the MVI. Understanding the MVI LEDs NOTE: When connected to the motorcycle, the MVI will have two LEDs that become active. It is important to know how these LEDs are used to understand the state in which the MVI is currently in. Blue LED (Bluetooth) - Flashes when data is being sent over the Bluetooth connection. Red LED (Power) - Blinks when the device is powered on. 8
Hardware Installation SECTION 4 1 Locate the Motorcycle s Data Port Socket. This socket will reside behind the battery side panel, or underneath the seat. 2 Remove the rubber plug from the Data port as shown. 3 Plug the MVI into the Data Port. NOTE: Depending on the year and model of the motorcycle, the Data Port will have either 4 or 6 pin locations. The pin count on the MVI will match the pin count on the motorcycle Data Port. 4PIN (J1850) 6PIN (CAN) 4 Find a location for the MVI s plastic housing to be installed. NOTE: For under-seat installs, the best option may be to tuck it in next to the frame. For side panel installations, use the velcro strip to fasten the plastic housing to a flat surface behind the panel. 5 Use the supplied zip-ties to fasten the cables away from moving and/or hot components. INSTALLATION TIPS - When routing the cables, avoid over-bending or kinking. If possible, route the cables along the existing motorcycle harness. - To avoid damage to the plastic housing and connectors, double check that they will not interfere with the seat. - If required, use the Velcro strap to fasten the enclosure to the motorcycle. Using a clean, dry rag, clean the areas the velcro will stick to. 9
Using Vigilante SECTION 5 NOTE: Before using Vigilante, make sure you have completed the following: - Update the MVI with the latest software - Install the MVI and other hardware on the motorcycle - Download the Vigilante App to your device - Pair the display device with the installed MVI Pairing Bluetooth MVI (Installed on Motorcycle) Wireless Bluetooth Connection The Display Device 1 On the motorcycle, turn the Ignition Switch to the Ignition position, and the engine Off/Run Switch to the Run position. 2 On the display device, open the Vigilante App. (A screen will appear letting you know that you have not yet made a connection ( Paired ) with your MVI). Android Devices ios Devices 2A Press the Bluetooth Settings Button. 2B Turn ON Bluetooth. 2C Click Scan for Devices. 2D Scroll down the list of devices and select the SC MVI ##### option. 2E Press the back arrow on the device to return to the App. 2A Click OK then open the device Settings. 2B Press the Bluetooth option. 2C Turn ON Bluetooth. 2D Scroll down the list of devices and select the SC MVI ##### option. 2E Return to the Vigilante App NOTE: Once the device is connected to the MVI, an icon will be visible. If the icon is blue, the device is connected to the MVI. If it is gray, it is not. 10
The Main Menu - At a Glance ios Only: Swipe the screen to view the About & Settings. NOTE: For android devices, access the About and Settings menus by pressing the Menu button on the device. TUNING Program your motorcycle using pre-made tunes Search for tunes directly related to your hardware upgrades DTC SPY Display Diagnostic Trouble Codes (DTCs) Search for DTC information via the internet Clear DTCs from the ECM (Engine Control Module) PREFERENCES Allows you to adjust the unit of measure. Automatically save data logs. Calibrate the gear indicator. Change the brightness settings of the device. DAQ Monitor multiple PIDs at one time on multiple screens View the data using multiple types of graphic visualizations Record data logs DIGITAL DISPLAY Display and choose from multiple PIDs using digital style gauges Monitor 2,4,6,8, or 12 Gauges on one screen) DEVICE LIST (Android Only) Shows a list of MVIs your display device is currently paired with. GAUGES Display MPH, RPM, Engine Temp, and Battery Voltage PIDs on analog style gauges Monitor up to three different PIDs on one screen PERFORMANCE Test out your latest upgrades using the three available performance tests 0-60 mph 1/8 Mile 1/4 Mile ABOUT Gives you information related to the MVI as well as your motorcycle. 11
Understanding Parameter IDs (PIDs) NOTE: Before using Vigilante, it is important to understand what the term PID refers to. A PID is a code that the MVI uses to request specific data from the motorcycle. The MVI reads these codes while your device displays them. This gives you the ability to monitor any available PID in real time. There are two ways to display a PID. The DAQ Menu The DIGITAL DISPLAY Menu NOTE: After choosing one of the two options above, a screen with different PIDs being displayed will appear. In order to change what is being displayed, refer to the following steps. 1 Press and hold the gauge you would like to change. After a few seconds, the PID selection menu will appear. 2 Scroll through the list of available PIDs and choose one to view. FAVORITES Will only show the PIDs you have saved as a favorite. To Save a Favorite: 1 Press and hold the PID. 2 Choose the Add to Favorites option. RECENT Shows a list of PIDs that have been recently selected or modified. ALL PIDs Shows an alphabetical list of all available PIDs. 12
Display Options Analog Gauges These gauges will only show default PIDs, and cannot be modified. If you would like to monitor PIDs other than RPM, MPH, Battery Voltage, or Engine Temperature, please refer to the Digital Display section below. Digital Gauges These gauges are easy to read and can be modified to display different PIDs. Refer to the Understanding Parameter IDs section for information on how to change PIDs. Data Acquisition Gauges (DAQ) These gauges are similar to the other gauge options in that they allow you to monitor multiple PIDs on one screen. The DAQ feature goes one step further allowing you to monitor multiple PIDs on multiple screens. There are three DAQ screen types available NOTE: To change from one gauge screen to another, swipe the screen to the left/right. This will allow you to toggle between each of the available gauge layouts for any of the three gauge types. (i.e Digital, Analog, and DAQ) 13
Tuning NOTE: The Flash product comes pre loaded with one VIN-unlock credit. Meaning it can only tune one motorcycle. However, you can purchase a second credit if you would like to tune a second motorcycle. Once a second credit is available, two motorcycles each with three custom tunes (and one stock tune), can be stored on the MVI. 1 From the Main Menu, choose the Tuning Icon. NOTE: The four empty folders on the left indicate that the MVI is not currently storing any calibration files for your particular motorcycle. 2 Choose either Motorcycle 1 or Motorcycle 2. NOTE: Any calibrations previously stored in Motorcycle 1 or 2 for a different motorcycle will be erased and replaced. 3 Choose the Search Calibrations button at the bottom of the screen. 4 Login to your account with the User name and Password you specified during the registration process. NOTE: If you have not yet registered: Choose the Register button and follow the on-screen instructions. 5 Select an Exhaust Manufacturer, and an Intake Manufacturer from the list provided. NOTE: This choice will depend on what modifications you have made to your motorcycle. If the specific manufacturer is not available, choose Other. 14
6 Select a Model for both manufacturers. NOTE: If the exact model is not available, choose Other. Choosing Other will require you to choose a Style which will help narrow down the search. Choose the style that best describes your application. 7 Select the Next button. NOTE: The best match will be displayed. There may be other matches available for your specific application. If available, chose the Other Matches button to view them. 8 Select the Download button. NOTE: It is recommended that you be connected to a wireless network to minimize the data usage on your device. 9 Press the Program Calibration button. NOTE: If this is the first time programming a specific motorcycle, you will be asked if you would like to use a credit to program it. When you purchased the Vigilante Flash, you receive one free credit. This free credit allows you to connect and lock your MVI to one motorcycle. Once the free credit is spent, you have the choice to purchase a second credit giving the MVI the ability to lock onto and program a second Motorcycle. Only one credit per motorcycle is required. If you are out of credits, you will be prompted to visit our website at: http://vigilante.superchips.com 15
CAUTION: Do not turn the Ignition Switch or Run switch off during the programming process. Also, the MVI must remain plugged into the vehicles data port throughout the tuning process. Do not remove the cable from the data port while tuning. 10 After the motorcycle has been updated with the new calibration, turn the key to the off position for 20 seconds. Press OK. Vigilante Device Indicates that the motorcycle is currently programmed with the stored calibration file Motorcycle The original stock file is stored here and cannot be overwritten 16
DTC Spy DTCs (Diagnostic Trouble Codes) are used to diagnose problems with the motorcycle. Vigilante allows you to read and clear the DTCs. This screen also gives you the option to search the internet for more information on the currently selected code. Press the buttons located on the bottom of the screen to Clear and Search for DTCs. Performance Performance tests allow you to determine how your hardware upgrades and new tunes have affected your motorcycle s performance. WARNING - These tests are meant to be used in closed circuit racing environments only. Do not use these tests to break any traffic laws. Ignoring traffic laws could lead to injury or death. There are three tests to choose from: *0-60 mph - Time it takes to reach 60 mph from a stand still. *1/8 mile - Time it takes to travel 1/8 mile. *1/4 mile - Time it takes to travel 1/4 mile. To start and perform a test: 1 Choose the test you would like to perform. 2 Come to a complete stop. 3 Press the green Touch to Start button. 4 Watch the lights on the tree light up. When the green light is lit, GO!!! Once the test is completed, a TIME SLIP will be displayed showing the results of the test. 17
Recording Logs The Recorded Log is a history of raw data taken from the device based on start, and stop conditions specified by the user. Android Devices 1 Press the device s Menu button. 2 Choose Preferences from the menu. 3 Set the Start and End trigger values. 4 When logging is complete, plug the device into a computer via USB. 5 Enter the device folders and open the log file stored in Superchips\daq. ios Devices 1 On the Main Menu choose the Settings Icon. 2 Set the Start and End trigger values. 3 When logging is complete, plug the device into a computer with itunes. 4 Under the Apps tab in itunes, highlight the log file, and Save to a folder on the computer for viewing. NOTE: The Start trigger is the value at which the logs will start to record. The End trigger is the value at which the logging will stop. Calibrate Gear Indicator OTE: To properly calculate your gear indicator, he software needs both speed and RPM data points o determine what gear your motorcycle is currently n. The gear indicator will not be displayed until this alibration has been successfully completed. Android Devices 1 Press the Android device s menu button and choose the Preferences option. ios Devices 1 On the Main Menu choose the Settings Icon. Both Devices 2 Choose a Transmission type. 3 Press Calibrate Gear Indicator. 4 Start out in 1st gear and gradually accelerate. The display will ask you to HOLD. 5 Continue accelerating until you are instructed to SHIFT. Repeat this until all gears have been calibrated. Each gear will be shown WARNING - While driving, keep your eyes on the road! Use this feature only on safe, non congested roadways. Obey all traffic laws. Ignoring traffic laws could lead to injury or death. 18
Warranty WARRANTY INFORMATION This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. LIMITED 1 YEAR WARRANTY Powerteq (hereafter SELLER ) gives Limited Warranty as to description, quality, merchantability, and fitness for any product s purpose, productiveness, or any other matter of SELLER s normal use* of the product sold herewith. The SELLER shall be in no way responsible for the product s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product s kit. All products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by the SELLER. Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses. This shall constitute the sole remedy of the purchaser and the sole liability of the SELLER. To the extent permitted by law, the foregoing is exclusive and in lieu of all warranty and merchantability or fitness. In no event shall SELLER or its suppliers be liable for special or consequential damages. If the BUYER sends back a failed unit that is out of warranty and chooses to buy a refurbished unit, the refurbished unit will only carry a 90 day warranty. If the BUYER purchases a new unit at a predetermined discounted rate, it will have the standard 1 year warranty. Under no circumstances will the SELLER be liable for any damage or expenses incurred by reason of the use or sale of any such equipment. The installation of this product indicates that the buyer has read and understands this agreement and accepts its terms and conditions. In the event that the buyer does not agree with this agreement, the buyer may promptly return this product, in a new and unused condition, with a dated proof of purchase, to the place of purchase within thirty (30) days from date of purchase for a full refund. NOTE: This warranty is void for any new products purchased through auction web sites, classified listings, or publications. Warranty is valid only for new products purchased through Authorized Dealers (proof of purchase required for all warranty claims). *Intended normal use means this item is being used as originally intended and for the original application as sold by Powerteq. Any modifications to this item, or if it is used on an application other than as marketed, will VOID the warranty. It is the sole responsibility of the customer to determine that this item will work on the application they intend. Powerteq will accept no liability for custom applications. SECTION 6 19
Copyright 2012 REV 00 For additional questions not found in the user guide call: Technical Support (888) 227-2447 8:00 am - 5:00 pm EST To expedite your support call, please have your Vehicle Information, Part Number, and Serial Number ready prior to calling Technical Support.