North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8
Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06 2.26.2 2.0 4.00 4.00 2.2 42.0 6 2.0.00 /6 x /2.9 6.8 /4.48 9.6.68 2.6 /4.9.94 /2.96 9.2 2.2 2.0 2 /2.94.88.9 8.26 4 2.0.00.88 6.6 /2.06 0.2 6.82 6.0 8.00 02.00 0 6.80 2.0 2.660.20 * Commercial quality low carbon ( max) good ductility easy to fabricate and weld. Used for ornamental iron work banding strapping and other general uses where cold forming is required. Hot Rolled Carbon Flats ASTM A-6 Size in Per 20 Ft. /6 x 4 4.20 8.00 x 6 6. 2.0 x 8 8.00 0.00 /8 x.2 2.0 /4.94.88 /2.9 8.26 2 2.0.00 2 /2.88 6.6.82 6.0 /2 4.46 89.26 4.00 02.00 6. 2.0 6.60.00 8 0.200 204.00 0 2.6 2.20 2. 06.20 /2 x.00 4.00 /2 2.0.00 2.400 68.00 2 /2 4.20 8.00.00 02.00 /2.90 9.00 4 6.800 6.00 8.00 0.00 6 0.200 204.00 8.600 22.00 9.20 06.40 0.02 40.40 2 20.42 408.40 /8 x 2 4.20 8.00 2 /2. 06.0 6. 2.0 4 8.00 0.00 0.60 22.60 6 2. 2.00 Hot Rolled Carbon Flats ASTM A-6 Size in Per 20 Ft. /4 x /2.42 8.0 /4.68 2.6.80.00 /4.06 2.26 /2.2 2.0 2.00 4.00 2 /2 2.2 42.0 2.0.00 /2 2.9 9.0 4.400 68.00 4 /2.80 6.60 4.20 8.00 6.00 02.00 8 6.800 6.00 0 8.08 0.6 2 0.20 204.20 /4 x /2.82 6.0 2.00 02.00 2 /2 6. 2.0.60.00 4 0.200 204.00 2.0 2.00 6.00 06.00 8 20.400 408.00 0 2.00 0.00 2 0.600 62.00 x 2 6.800 6.00 0.200 204.00 4.600 22.00.000 40.00 6 20.400 408.00 8 2.200 44.00 0 4.000 680.00 2 40.800 86.00 * These hot rolled steel bars, flats, rounds, and squares, are M-020 or ASTM A-6. They are of a low carbon grade with good overall mechanical properties. Used for general purpose structural and miscellaneous applications that involve cold bending, hot forming, welding and punching. Mill test reports of some sizes are available on request.
Channels Bar Sizes B A Estimated Weight, Lbs. Size in Inches Per Per A x B x C Foot Length x /2 x /8.80 6.0 /4 x /2 x /8.00 20.0 /2 x /2 x /8.2 22.4 2 x /2 x /8.4 26.8 2 x x /8.9.8 2 x x /6 2.2 46.4 C * Structural Shapes are commonly riveted, bolted or welded when used for general structural purposes in buildings, bridges, and support columns. The American Iron and Steel Institute designates structural shapes with a prefix letter or letters preceeding the size and weight per foot. Channels Structural Sizes ASTM A-6 AISI A B C Designation Width Flange Web Depth in In. & In Depth Thickness Lbs. Per Foot Inches Inches Inches C x 4. x 20.40.0 40.40.0 C x x 20.498.28 40.498.28 C4 x.4 x 20 4.80.80 40 4.80.80 C4 x.2 x 20 4.20.20 40 4.20.20 C x 6. x 20.0.90 40.0.90 C x 9 x 20.88.2 40.88.2 B C A B A C C6 x 8.2 x 20 6.920.200 40 6.920.200 C6 x 0. x 20 6 2.04.4 40 6 2.04.4 C6 x x 20 6 2..4 40 6 2..4 C x 9.8 x 20 2.090.20 40 2.090.20 C8 x. x 20 8 2.260.220 0 8 2.260.220 40 8 2.260.220 C8 x. x 40 8 2.4.0 C9 x.4 x 20 9 2.40.20 40 9 2.40.20 C0 x. x 20 0 2.600.240 40 0 2.600.240 C0 x 20 x 20 0 2.9.9 40 0 2.9.9 C2 x 20. x 20 2 2.940.280 40 2 2.940.280
A B Wide Flange (W) Beams ASTM A-6 B Standard I Beams Structural Sizes C ASTM A-6 AISI A B C Designation Depth Flange Web Depth in In. & In Width Thickness Lbs. Per Foot Inches Inches Inches W4 x x 20 4.6 4.060.280 x 40 4.6 4.060.280 W x 6 x 20.00.000.240 6 x 40.00.000.240 W6 x 9 x 20.90.940.0 9 x 40.90.940.0 2 x 20 6.00 4.000.20 2 x 40 6.00 4.000.20 x 20.99.990.20 x 40.99.990.20 20 x 20 6.20 6.020.260 20 x 40 6.20 6.020.260 2 x 20 6.8 6.080.20 2 x 40 6.8 6.080.20 W8 x 0 x 20.89.940.0 0 x 40.89.940.0 x 20.99 4.000.20 x 40.99 4.000.20 8 x 20 8.4.20.20 8 x 40 8.4.20.20 2 x 20 8.28.20.20 2 x 40 8.28.20.20 24 x 20.9 6.49.24 24 x 40.9 6.49.24 28 x 20 8.06 6..28 28 x 40 8.06 6..28 x 20 8.00.99.28 x 40 8.00.99.28 x 20 8.2 8.02. x 40 8.2 8.02. 40 x 40 8.2 8.00.60 W0 x 2 x 40 9.8.960.90 x 20 9.99 4.000.20 x 40 9.99 4.000.20 22 x 20 0..0.240 22 x 40 0..0.240 26 x 20 0..0.260 26 x 40 0..0.260 x 40 0.60 0.9.0 W2 x 4 x 20.9.90.200 4 x 40.9.90.200 6 x 20.99.99.220 6 x 40.99.99.220 9 x 20 2.6 4.00.240 9 x 40 2.6 4.00.240 26 x 20 2.22 6.490.20 26 x 40 2.22 6.490.20 x 20 2.0 6.60.00 x 40 2.0 6.60.00 40 x 20.94 8.00.29 40 x 40.94 8.00.29 W4 x 22 x 20.2.00.20 22 x 40.2.00.20 0 x 20.86 6..20 0 x 40.86 6..20 x 40.92 8.06.0 W6 x 26 x 20.6.0.20 26 x 40.6.0.20 W8 x x 20. 6.00.00 x 40. 6.00.00 0 x 40.99.49. W24 x x 40 2..00.9 Miscellaneous M Beams Structural Sizes Junior Beams M6 x 4.4 x 20 M6 x 4.4 x 40 6.00.8.4 M8 x 6. x 20 M8 x 6. x 40 8.00 2.20. M0 x 9 x 20 M0 x 9 x 40 0.00 2.0. M2 x.8 x 20 M2 x.8 x 40 2.00.000. A C ASTM A-6 AISI A B C Designation Depth Flange Web Depth in In. & In Width Thickness Lbs. Per Foot Inches Inches Inches S x. x 20 2.0.0 S x. x 40 S4 x. x 20 4 2.660.90 S4 x. x 40 S x 0 x 20.000.20 S x 0 x 40 S6 x 2. x 20 6.0.20 S6 x 2. x 40 S6 x.2 x 20 6.6.46 S6 x.2 x 40 S8 x 8.4 x 20 8 4.000.20 S8 x 8.4 x 40 S0 x 2.4 x 20 0 4.660.0 S0 x 2.4 x 40 S2 x.8 x 20 2.000.0 S2 x.8 x 40 Hot Rolled Sheets Grade A-0 Lbs. Per Size in Inches Piece 6 Ga. Approx./6 2.# Sq. Ft. 48 x 96 80.0 48 x 20 00.0 48 x 44 20.0 60 x 96 00.0 60 x 20 2.0 4 GA.2# Sq. Ft. 48 x 96 00.0 48 x 20 2.0 48 x 44 0.0 60 x 96 2.0 60 x 20 6. 60 x 44 8. 2 GA. 4.# Sq. Ft.,.04 48 x 96 40.0 48 x 20.0 48 x 44 20.0 48 x 240 0.0 60 x 20 28.8 60 x 240 4. 2 x 20 262. 2 x 44 4.6 2 x 240 2.0 GA. Approx..00# Sq. Ft. 48 x 96 60.0 0 GA. Approx. /8.62# Sq. Ft.,. 48 x 96 80.0 48 x 20 22.0 48 x 44 20.0 48 x 240 40.0 60 x 96 22.0 60 x 20 28. 60 x 240 6.0 2 x 20. 2 x 44 40.0 2 x 240 6.0 * Hot Rolled Sheets are ductile enough to withstand simple bending and forming without cracking along the outside radius of a bend. They are used to construct various agricultural, automotive and equipment parts.
Carbon Steel Plate Size in Lbs. Per Lbs. Per * Inches Square Foot Piece /6 x 48 x 96.66 24. /6 x 48 x 20 06.4 /6 x 48 x 240 62.8 /6 x 60 x 20 8.0 /6 x 60 x 240 66.0 /6 x 2 x 20 49.6 /6 x 2 x 44.2 /6 x 2 x 240 99.2 /6 x 96 x 240,22.6 /4 x 48 x 96 0.2 26. /4 x 48 x 20 408.4 /4 x 48 x 240 86.8 /4 x 60 x 96 408.4 /4 x 60 x 20 0. /4 x 60 x 240,02.0 /4 x 2 x 20 62.6 /4 x 2 x 44.2 /4 x 2 x 240,22.2 /4 x 84 x 20 4.0 /4 x 96 x 240,6.6 /6 x 48 x 96 2.6 408. /6 x 48 x 20 0.4 /6 x 48 x 240,020.8 /6 x 60 x 240,26.0 /6 x 2 x 240,.2 /6 x 96 x 240 2,04.6 /8 x 48 x 96. 489.9 /8 x 48 x 20 62.4 /8 x 48 x 240,224.8 /8 x 60 x 20 6. /8 x 60 x 240,.0 /8 x 2 x 20 98.6 /8 x 2 x 240,8.2 /8 x 96 x 240 2,449.6 /2 x 48 x 96 20.42 6.4 /2 x 48 x 20 86.8 /2 x 48 x 240,6.6 /2 x 60 x 20,02.0 /2 x 60 x 240 2,042.0 /2 x 2 x 20,22.2 /2 x 2 x 240 2,40.4 /2 x 96 x 240,26.2 /8 x 2 x 240 2.2,062.4 /8 x 96 x 240 2.2 4,084.8 /4 x 48 x 96 0.6 980.2 /4 x 60 x 240 0.6,06.0 /4 x 2 x 240 0.6,6.6 /4 x 96 x 240 0.6 4,900.8 x 48 x 96 40.84,0.8 x 60 x 240 40.84 4,084.0 x 2 x 240 40.84 4,900.8 x 96 x 240 40.84 6,4.4 /8 x 96 x 240 4.94,0.4 /4 x 96 x 240.0 8,68.0 /2 x 60 x 480 6.26 2,22.00 /2 x 96 x 240 6.26 9,80.6 /4 x 96 x 240.4,4.2 2 x 96 x 240 8.68,068.8 2 /4 x 96 x 240 9.89 4,02.4 2 /2 x 96 x 240 02.0 6,6.0 2 /4 x 96 x 240 2.0,968.0 x 96 x 240 22.2 9,60.2 Carbon Steel Plate is used for a variety of structural applications including bridges, ships, containers, storage tanks, machinery, and buildings. It is machineable and highly weldable. Abrasion Resistant (AR) Carbon Steel Plates Brinell Hardness 200 to 22 Lbs. Per Lbs. Per Size Sq. Foot Piece /6 x 2 x 20.66 49.6 /6 x 2 x 240 99.2 /6 x 96 x 240,2.6 /4 x 2 x 20 0.2 62.6 /4 x 2 x 240,22.2 /4 x 96 x 240,6.6 /8 x 2 x 20.2 99.2 /8 x 2 x 240,88.4 /8 x 96 x 240 2,4.2 /2 x 2 x 20 20.42,22.2 /2 x 2 x 240 2,40.4 /2 x 96 x 240,26.2 /4 x 2 x 20 0.6,8.8 /4 x 2 x 240,6.6 /4 x 96 x 240 4,900.8 x 2 x 20 40.84 2,40.4 x 2 x 240 4,900.8 x 96 x 240 6,4.4 * Abrasion Resistant Plate has an increased yield strength and a resistance to penetration and wear.it can be welded with some difficulties. Applications include: cutting teeth, blades, aggregate crushers, liners, mixers, loaders and other harsh environments subject to severe wear. Pressure Vessel Quality Plate A6 grade 0 Construction Alloy Plate (T- Plate) Brinell Hardness Approx. 2 Size in Lbs. Per Lbs. Per Inches Square Foot Piece /4 x 8 x 20 0.2,6.60 /8 x 8 x 20. 2,449.60 /2 x 8 x 20 20.42,26.20 /8 x 8 x 20 2.2 4,08.20 /4 x 8 x 20 0.6 4,900.80 /8 x 8 x 20.4,8.40 x 8 x 20 40.84 6,4.40 /2 x 8 x 40 6.26 9,60.20 Grade A-4 Quenched and tempered high strength alloy steel with a yield strength nearly times that of A6 carbon steel plate. Used extensively for component parts and as liners for construction equipment, mining machinery, truck bodies, chutes, and wear plates. Size in Lbs. Per Lbs. Per Inches Square Foot Piece /6 x 96 x 240.66,22.60 /4 x 96 x 240 0.2,6.60 /8 x 96 x 240. 2,449.60 /2 x 96 x 240 20.42,26.20 /4 x 96 x 240 2.6 4,900.80 High Strength/Low Alloy Plates A-2 Grade 0 Size in Lbs. Per Lbs. 20 Ft. Inches Square Foot Length /4 x 96 x 240 0.2,6.66 /6 x 96 x 240 2.6 2,04.60 /8 x 96 x 240. 2,449.60 /2 x 96 x 240 20.42,26.20
Floor Plates 4 Way Medium Pattern Commercial Quality Lbs. Per Lbs. Per Size Square Foot Piece 4 Ga. x 48 x 96. 20.0 x 48 x 20. 0.0 2 Ga. x 48 x 96.2 68.0 x 48 x 20 20.0 /8 x 48 x 96 6. 96.8 /8 x 48 x 20 246.0 48 x 44 29.2 x 48 x 240 492.0 x 60 x 20 0. x 60 x 240 6.0 x 2 x 240 8.0 /6 x 48 x 96 8. 28.8 /6 x 48 x 20 48.4 x 48 x 240 696.8 x 60 x 20 4. x 60 x 240 8.0 x 2 x 240,04.2 /4 x 48 x 96.26 60.4 /4 x 48 x 20 40.4 x 48 x 240 900.8 x 60 x 20 6.0 x 60 x 240,26.0 /4 x 2 x 20 6.6 x 2 x 240,.2 x 96 x 240,80.6 /8 x 2 x 240 6.,962.0 96 x 240 2,66.0 /2 x 48 x 96 2.4 686.4 /2 x 2 x 240 2,4.0 4 Way Medium Pattern Floor Plate provides a skid resistant surface for stairs, walkways, platforms and floors. The raised patterns run continuously regardless of plate orientation. Floor plate is easily welded, machined and drilled. Hot Rolled Squares ASTM A-6 Size in Per 20 Ft. /8.48 9.6 /2.80.00 /8.28 26.6 /4.9 8.26.400 68.00 08 Cold Drawn Carbon Squares Size in Per 2 Ft. Number /6.96.46 /4.22 2.2 /6.2.988 /8.486.4 /6.64.8 /2.80 0.20 /8.28.94 /4.9 22.96 /8 2.60.24.400 40.80 /4. 6.6 /2.60 9.80 2.600 6.20 ERW Structural Steel Tubing Square and Rectangular ASTM A-00 A- Weight Size Wall/Ga. Per Ft. /2 x /2 x 24.06/6 ga.6 /4 x /4 x 24.06/6 ga.6 x x 24.06/6 ga.8 x x 24.08/4 ga.04 x x 24.20/ ga.44 4 x 4 x 24.08/4 ga.2 4 x 4 x 24.20/ ga.84 2 x 2 x 24.06/6 ga.26 2 x 2 x 24.08/4 ga.60 2 x 2 x 24.20/ ga 2.2 2 x 2 x 24.88//6.22 2 x x 24.08/4 ga.60 2 x x 24.20/ ga 2.2 2 x 2 x 24.06/6 ga. 2 x 2 x 24.08/4 ga 2.0 2 x 2 x 24.20/ ga.0 2 x 2 x 20.88//6 4.49 2 x 2 x 24.88//6 4.49 2 x 2 x 20.20//4.4 2 x 2 x 24.20//4.4 2 x 2 x 40.20//4.4 2 /2 x 2 /2 x 24.20/ ga.8 2 /2 x 2 /2 x 24.88//6.9 2 /2 x 2 /2 x 20.20//4. 2 /2 x 2 /2 x 40.20//4. x x 24.20/ga.0 x /2 x 24.08/4 ga 2.8 x /2 x 24.20/ ga.48 x 2 x 20.20/ga.90 x 2 x 24.20/ ga.90 x 2 x 20.88//6.9 x 2 x 24.88//6.9 x 2 x 40.88//6.9 x 2 x 20.20//4. x x 24.08/4 ga 4.0 x x 24.20/ ga 4.0 x x 20.88//6 6.8 x x 24.88//6 6.8 x x 40.88//6 6.8 x x 20.20//4 8.8 x x 24.20//4 8.8 x x 40.20//4 8.8 x x. x 20 2. /2 x /2 x 40.20//4 0.8 4 x 2 x 24.20/ ga 4. 4 x 2 x 20.88//6 6.8 4 x 2 x 24.88//6 6.8 4 x 2 x 40.88//6 6.8 4 x 2 x 20.20//4 8.80 4 x 2 x 40.20//4 8.80 4 x x 20.20//4 0. 4 x 4 x 24.08/4 ga 4.422 4 x 4 x 24.20/ ga 6.0 4 x 4 x 20.88//6 9.42 4 x 4 x 24.88//6 9.42 4 x 4 x 40.88//6 9.42 4 x 4 x 20.20//4 2. 4 x 4 x 40.20//4 2. x x 20.20/ 4 2.2 x x 40.20//4.9 x x. x 20 22. 6 x 2 x 20.88//6 9.42 6 x 2 x 24.88/ 6 9.42 6 x 2 x 40.88//6 9.42 6 x x 40.88/ 6 0.0 6 x x 20.20//4.9 6 x 4 x 24.20/ ga 8.6 6 x 4 x 40.88//6.9 6 x 4 x 40.20//4.62 6 x 6 x 40.20//4 9.02 Structural Steel Tubing is available in square and rectangular shapes in a wide variety of sizes. It combines strength with light weight and can be fabricated by all standard methods. It is used for braces, columns, supports and other structural members.
Red Oxide (Primed) Square Tubing Size in Inches 08 Cold Finished Carbon Rounds Weight Per Foot 2 X 2 X 6GA.8 X X 6GA.8 4 X 4 X 6GA.0 2 X 2 X 6GA.2 X X 4GA.0 4 X 4 X 4GA. 2 X 2 X 4GA.99 2 X 2 X 4GA 2.6 X X 4GA.29 Estimated Size in Inches Per Foot 20 Ft. Length /8.042.04/2 Ft /6.094.88 /4.6.4 /6.26.22 /8.6.2 /6. 0.22 /2.668.6 9 /6.84 6.90 /8.04 20.86 /6.262 2.24 /4.02 0.04 /6.6.26 /8 2.044 40.88 /6 2.4 46.94 2.60.40 /6.04 60.28 /8.9 6.8 /6.66.2 /4 4. 8.46 /6 4.604 92.08 /8.049 0.00 /6.8 0.40 /2 6.0 20.0 /8.0 4.00 /6.604 2.0 /4 8.8 6.60 /8 9.88 8.80 /6 0.020 200.40 2 0.680 2.60 2 /6 2.80 2.60 2 /4.20 20.40 2 /8.060 0.20 2 /6.80.40 2 /2 6.690.80 2 /4 20.200 404.00 2 /6 2.040 460.80 24.00 480.60 /4 28.2 64.60 /6. 6.00 /2 2.0 64.20 /4.9.80 /6 4.44 828.80 4 42.0 84.60 4 /2 4.080,08.60 66.60,.20 Cold Finished Shapes, both rounds and squares are provided by cold drawing oversized hot rolled bars to a required size. This type steel is weldable and machineable but is particularly well suited to hardening by heat treatment or carbonizing. Applications include gears, pins, and shafts Hot Rolled Rounds ASTM A-6 Random Lengths Size in Per 20 Ft. /4.6.4 /6.26.22 /8.6.2 /2.668.6 /8.04 20.86 /4.02 0.04 /8 2.044 40.88 2.60.40 /8.9 6.8 /4 4. 8.46 /8.049 0.00 /2 6.008 20.20 /4 8.8 6.60 2 0.680 2.60 2 /2 6.690.80 442 Round Hot Rolled Alloy Bars Heat-Treated 28/4 Bhn 008 Industrial Quality Rounds Size In Weight Inches Per Foot /8.044 /4.04 /8 2.046 2.6 /4 4.6 /2 6.04 /4 8.86 2 0.69 2 /4. 2 /2 6. 2 /4 20.2 24.06 /2 2.4 4 42. 4 /2 4. 66.82 /2 80.86 6 96.22 Estimated Size in Inches Per Foot 20 Ft. Length /4 x 20.6.4 /8 x 20.6.2 /6 x 20.26.22 /2 x 20.668.6
Galvanized Mild Steel Shapes Lbs. Per Lbs. Per Size Sq. Foot 20 Ft. Length /2.0 4.02 /8.0 22.20 /4.90.80 /8 2.0 4.40 2.80 6.60 Galvanized Bar Size Angles 20-0 /4 x /4 x /8.60.00 x x /8.840 6.80 x x /6.220 24.40 /2 x /2 x /8.290 2.80 /2 x /2 x /6.890.80 /2 x /2 x /4 2.460 49.20 2 x 2 x /8.0.00 2 x 2 x /6 2.60.20 2 x 2 x /4.0 6.00 2 /2 x 2 /2 x /4 4.0 86.0 * Galvanized Shapes are hot dipped with a rich coating of zinc to insure long lasting protection from rusting and Corrosion. Special orders are custom galvanized to customer specification. Angles Bar Sizes Angles, Bar Size ASTM A-6 Estimated Weight, Lbs. Size in Per Lbs. /2 x /2 x /8 x 20.8.6 /4 x /4 x /8 x 20.9.8 x x /8 x 20.80 6.0 /6 x 20.6 2.2 /4 x 20.49 29.8 /4 x /4 x /8 x 20.0 20.2 /6 x 20.48 29.6 /4 x 20.92 8.4 /2 x /2 x /8 x 20.2 24.6 /6 x 20.80 6.0 /4 x 20 2.4 46.8 /4 x /4 x /8 x 20.44 28.8 /6 x 20 2.2 42.4 /4 x 20 2..4 2 x /2 x /8 x 20.44 28.8 /6 x 20 2.2 42.4 /4 x 20 2..4 2 x 2 x /8 x 20.6.0 /8 x 40.6 66.0 /6 x 20 2.44 48.8 /6 x 40 2.44 /4 x 20.9 6.8 2 x 2 x /4 x 40.9 2.6 /8 x 20 4.0 94.0 2 /2 x /2 x /6 x 40 2.44 9.6 2 /2 x 2 x /6 x 20 2..0 /4 x 20.62 2.4 2 /2 x 2 /2 x /6 x 20.0 6.4 /4 x 20 4.0 82.0 /4 x 40 4.0 64.0 /8 x 20.90 8.0 Angles Structural Sizes ASTM A-6 Size in Weight Per Lbs.. x 2 x /6 x 20.0 6.4 /6 x 40.0 22.8 /4 x 20 4.0 82 /6 x 20.00 00 /8 x 20.90 8 x 2 /2 x /4 x 20 4.0 90 /8 x 20 6.60 2 x x /6 x 20. 4.2 /6 x 40. 48.4 /4 x 20 4.90 98 /4 x 40 4.90 96 /6 x 20 6.0 22 /8 x 20.20 44 /2 x 20 9.40 88 /2 x 2 /2 x /4 x 20 4.90 98 /2 x x /4 x 20.40 08 /2 x x /8 x 20.90 8 /2 x /2 x /4 x 20.80 6 /8 x 20 8.0 0 4 x x /4 x 20.80 6 /4 x 40.80 22 /6 x 20.20 44 /6 x 40.20 288 /8 x 20 8.0 0 /8 x 40 8.0 40 4 x 4 x /4 x 20 6.60 2 /4 x 40 6.60 264 /8 x 20 9.80 96 /8 x 40 9.80 92 /2 x 20 2.80 26 /2 x 40 2.80 2 x x /4 x 20 6.6 2 x /4 x 40 6.6 264 x x /6 x 20 8.2 64 x /2 x /6 x 20 8. 4 /6 x 40 8. 48 /8 x 20 0.4 208 /8 x 40 0.4 46 x x /8 x 20 2. 246 /8 x 40 2. 492 6 x /2 x /6 x 40 9.8 92 /8 x 40. 468 6 x 4 x /6 x 40 0. 42 /8 x 40 2. 492 /2 x 20 6.2 24 /2 x 40 6.2 648 6 x 6 x /8 x 40 4.9 96 /2 x 40 9.6 84 x 4 x /8 x 20.6 22 /2 x 40.9 6
Expanded Metals Size Wgt. Per Description Sheet Sq. Ft. Standard Pattern (Raised) /4 - #9 4 x 8.80# /4 - #9 6 x 8.80# /2 - #9 4 x 8.20# /2 - #6 4 x 8 2.0# /2 - #6 6 x 8 2.0# Flattened /2 - #6 4 x 8.82# /2 - # 4 x 8.40# /4 - #6 4 x 8.# /4 - # 4 x 8.# /4 - #9 4 x 8.# /4 - #9 x 0 4.# - #6 4 x 8.4# /2 - #6 4 x 8.8# /2 - # 4 x 8.# /2 - #9 4 x 8.4# Expanded Metal Grating 4# 4 x 8 4.00# 4.2# 4 x 8 4.2# 4 x 2 4.2# # 4 x 8.00# Catwalk Grating.00# 0 x 2.00#.00# 0 x.00# 4.2# 0 x 2 4.2# 4.2# 0 x 4.2# Expanded Metal is formed by slitting and pulling standard sheets to create a diamond pattern of strands and bonds. It is available in standard and flattened configuration. Primary uses are structural applications, grates, partitions and enclousures. Galvanized, aluminum and stainless steel expanded metal available on request. 4 Gauge 2 Gauge Grip Strut Grating Galvanized Heavy Duty 0 Gauge Welded Steel Bar Grating Channel Dia- Width Ht. monds Wgt./Ft. 4 /4 /2 2 2.# /2.0# 9 /2 /2 4.6# /4 /2 4.2# 8 /4 /2 8 6.# 24 2 0.4# 24 4 /2 0 8.9# 9 /2 /2 4.0# /4 /2.9# 8 /4 /2 8 8.# 24 2 0 0.4# 6 2 8 9.9# Weight Size Spacing Width Sq. Ft. Unpainted - Plain Bearing Bars /8 x 9W4 24 4.9 /8 x 9W4 6 4.9 /6 x 9W4 24. /6 x 9W4 6. /6 x /4 9W4 24 8. /6 x /4 9W4 6 8. HOT DIP GALVANIZED - Plain Bearing Bars /8 x 9W4 24.2 /6 x 9W4 24.8 /6 x /2 9W4 6 0. Unpainted - Serrated Bearing Bars /6 x 9W4 6. Diamond-Grip Safety Grating ASTM A-26 G90 (2-) Channel Wgt. Width Heigth Per Ft. 4 Gauge 4 /4 /2 2.# 9 /2 /2.# /4 /2 4.# 24 2.6# 24 4 /2 8.9# Hot Dip Galvanized - Serrated Bearing Bars /6 x 9W4 6.8 SADDLE CLIPS - FOR ABOVE GRATING /6 and /8 Bolt or self tap screw not included with saddle clip. 9W4 Spacing Has the bearing bars on /6 Centers and the /4 Cross bars on 4 centers. Welded Steel Grating can be supplied either unpainted or galvanized to customer requirements. Special requests for unusual sizes can be filled. Also serrated or smooth top. 2 Gauge 9 /2 /2 4.8# /4 /2.# 24 2 0.8# ASTM - A8 Diamond-Grip is a one piece metal plank-type grating manufactured by a cold forming process in the shape of a channel. The walking surface has rough serrated edges around diamond shaped openings. Diamond openings are complete with radius corners at the saddle and side channel locations. Reinforcing Wire Mesh Plain Wire Mesh Wt. Per Size Width Length 00 Sq. Ft. 6 x 6 6/6 (6 ga.) 0-0 42# New Designation 6 x 6 W2.9 x W2.9 6 x 6 0/0 (0ga.) 0-0 2# New Designation 6 x 6 W.4 x W.4
Domestic Galvanized Steel Pipe Threaded & Coupled 2 Lengths, Schedule 40 This Pipe meets ASTM-A Type F Specifications. /8.40.068.24 420 /4.40.088.42 420 /8.6.09. 420 /2.840.09.8 420 /4.0.. 420...68 420 /4.66.40 2.28 600 /2.90.4 2. 600 2 2..4.68 600 2 /2 2.8.20.82 600.0.26.62 600 /2 4.00.226 9.20 20 4 4.0.2 0.89 20 Domestic Black Steel Pipe Threaded & Coupled 2 Lengths, Schedule 40 This Pipe meets ASTM-A Type F Specifications. /8.40.068.24 420 /4.40.088.42 420 /8.6.09. 420 /2.840.09.8 420 /4.0.. 420...68 420 /4.66.40 2.28 600 /2.90.4 2. 600 2 2..4.68 600 2 /2 2.8.20.82 600.0.26.62 600 4 4.0.2 0.89 20 Domestic Black Steel Pipe Bevel Ends 2 Lengths, Schedule 40 ASTM-A Type F /4.40.088.42 420 /8.6.09. 420 /2.840.09.8 420 /4.0.. 420...68 420 /4.66.40 2.2 600 /2.90.4 2.2 600 2 2..4.6 600 2 /2 2.8.20.9 600.0.26.8 600 /2 4.00.226 9. 20 4 4.0.2 0.9 20 Domestic Galvanized Steel Pipe Reamed & Drifted, Threaded & Coupled 2 Lengths, Schedule 40 ASTM-A Type F Round Tubing (Equivalent to Sch 0 Pipe Sizes) Import Steel Bare (No Mill Coating) Pipe Beveled Ends 2 Lengths, Schedule 40 ASTM-A Grade A Imported Galvanized Steel Pipe Threaded & Coupled 2 Lengths, Schedule 40 ASTM-A Grade A 2 2..4. 600 2 /2 2.8.20.90 600.0.26.0 600 OD in Wall in. Thickness Length.66.0 24 2..0 24 2.8.4 24 /4.0.. 420...68 420 /4.66.4 2.2 600 /2.9.4 2.2 600 2 2..4.6 600 /2.84.09.8 420 /4.0.. 420...68 420 /4.66.40 2.28 600 /2.90.4 2. 600 2 2..4.68 600 2 /2 2.8.20.82 600.0.26.62 600 4 4.0.2 0.89 0 6 6.62.280 8.9 92
Imported Black Steel Pipe Threaded & Coupled 2 Lengths Schedule 40 Pipe Ends ASTM-A Grade A ASTM-A Grade A ASTM-A Grade A /2.84.09.8 420 /4.0.. 420...68 420 /4.66.40 2.28 600 /2.900.4 2.2 600 2 2..4.6 600.0.26.8 20 4 4.0.2 0.9 20 Imported Black Steel Pipe Beveled Ends 2 Lengths Schedule 40 /2.84.09.8 420 /4.0.. 420...68 420 /4.66.40 2.2 600 /2.900.4 2.2 600 2 2..4.6 600 2 /2 2.8.202.9 600.0.26.8 600 4 4.0.2 0.9 20 Imported Black Steel Pipe Standard Wall Thickness Beveled Ends Stocked in Single Random.6.28 4.62 60 6 6.62.280 8.9 900 8 8.62.22 28. 680 0 0..6 40.48 0 2 2.. 49.6 20 Import Sch 80 Black PE 2 Lengths ASTM-A Type F /2.840.4.09 0 /4.0.4.4 0..9 2. 0 /4.66.9.00 80 /2.90.200.6 80 2 2..28.02 80 2 /2 2.8.26.66 80.0.00 0.2 80 4 4.0. 4.98 020 6 6.62.42 28. 40 Import Steel Seamless Pipe Random Lengths (SRL)* Schedule 40 Plain Ends A 06 Grade B /2.84.09.8 4 /4.0.. 09...68 284 /4.66.40 2.28 26 /2.90.4 2.2 29 2 2..4.6 8.0.26.8 69 4 4.0.2 0.9 4 6 6.62.280 8.9 2 Import Steel Seamless Pipe Random Lengths (SRL)* Schedule 80 (A06 Grade B) /2.84.4.09 22 /4.0.4.4 4299..9 2. 960 /4.66.9.00 282 /2.90.200.6 298 2 2..28.02 29.0.00 0.2 298 4 4.0. 4.98 206 6 6.62.42 28. 680 * SRL - Single Random Lengths run between 8 and 22 feet in length