Pro-face AGP/AST3000 to Hitachi L200 Inverter via RTU Hitachi L200 Inverter a user can quickly set up a variable speed drive operator interface without requiring a and push buttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Hitachi L200 Inverter. For a full explanation of this project refer to Pro-face America Application Note 1156. 3. Hitachi L200 Inverter 4. Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter 6. CAT5e Ethernet Cable (Straight-Through) 7. The Pro-face sample project APNT1156.zip
Pro-face AGP/AST3000 to Yaskawa J7 Drive via RTU HMI Motion Quick Start Guides Yaskawa J7 Drive Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Yaskawa J7 Drive. For a full explanation of this project refer to Pro-face America Application Note 1157. 3. Yaskawa J7 Drive 4. Yaskawa SI-485/J7 RS485 Adapter 5. Pro-face CA4-ADPONL-01 COM2 Port Adapter 6. Pro-face CA3-ADPTRM-01 Termination Adapter 7. 5-Wire Shielded Cable 8. The Pro-face sample project APNT1157.zip
Pro-face AGP/AST3000 to Eaton MVX9000 AF Drive via Eaton MVX9000 AF Drive and push buttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Eaton MVX9000 AF Drive. For a full explanation of the project refer to Pro-face America Application Note 1169. 3. Eaton MVX9000 Variable Frequency AC Drive 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 6. RJ-12 cable. 8. The Pro-face sample project APNT1169.zip
Pro-face AGP3000 to Altivar Adjustable Speed Drive via RTU Altivar 31 Adjustable Speed Drive and push buttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1163. 2. Pro-face AGP3000 Series HMI with ladder logic programming feature 3. Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 6. Industrial RJ-45 cable 7. The Pro-face sample project APNT1163.zip
Pro-face AGP/AST3000 to ABB ACS350 VF Drive via RTU ABB ABB ACS350 Drive and pushbuttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and ABB ACS350 Variable Frequency AC Drive. For a full explanation of this project refer to Pro-face America Application Note 1161. 3. ABB ACS350 Variable Frequency AC Drive 4. ABB FMBA-01 Adapter 5. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 6. Pro-face CA3-ADPTRM-01 Termination Adapter 7. 3 Conductor shielded cable 8. The Pro-face sample project APNT1161.zip
Pro-face AGP/AST3000 to Allen-Bradley PowerFlex 4 VF Drive via RTU Allen-Bradley PowerFlex 4 AF Drive, Reduce system cost, no need for analog interfaces and indicators, fewer push buttons This document and the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP/AST using GP-Pro EX and an Allen-Bradley PowerFlex 4 Variable Frequency AC Drive. For a full explanation of the sample project refer to Pro-face America Application Note 1160. 3. Allen Bradley PowerFlex 4 Variable Frequency AC Drive 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 6. Category 5 shielded 8-conductor cable with a shielded male RJ45 connector 7. The Pro-face sample project APNT1160.zip
Pro-face AGP/AST3000 to Omron SYSDRIVE JX Series Inverter via RTU HMI Motion Quick Start Guides Omron SYSDRIVE JX Series Inverter Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Omron SYSDRIVE JX Series Inverter. For a full explanation of this project refer to Pro-face America Application Note 1173. 3. Omron SYSDRIVE JX Series Inverter 4. Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter 6. CAT5e Ethernet Cable (Straight-Through) 7. The Pro-face sample project APNT1173.zip available at https://www.hmisource.com/otasuke/files/appnotes/
Pro-face LT3000 CANopen Master to a Telemecanique Altivar 71 Adjustable Speed Drive CANopen Cable Pro-face LT3000 with CANopen Master Module Altivar Adjustable Speed Drive LT3000 Operator Interfaces and push buttons connecting and establishing communications between a Pro-face LT3000 using GP-Pro EX and a Telemecanique Altivar 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1172. 1. Pro-face GP-Pro EX Screen and Logic Editing software v2.2 or higher 2. Pro-face LT3300 Series HMI 3. Pro-face CA8-CANLT-01 CANopen master module 4. Telemecanique Altivar 71 Adjustable Speed Drive Controller 5. Telemecanique VW3 CAN A71 CANopen adapter 6. The Altivar drive EDS file TEATV71xyE.eds where x.y: is the drive software version 7. Standard CANopen network cable with DB9 CANopen bus connectors 8. The Pro-face sample project APNT1172.zip LT CANopen Master Unit