ms1505 SECTION 08 70 00 - Page 1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Hardware for interior and exterior doors. B. Thresholds and weatherstripping. 1.02 RELATED REQUIREMENTS A. Section 08 11 13 - Hollow Metal Doors and Frames. 1.03 INFORMATIONAL SUBMITTALS A. Quality assurance data: 1. Hardware supplier shall supply templates to door and frame manufacturer to enable proper and accurate sizing and locations of cut outs for hardware. 2. "Hardware Schedule" listing hardware required for each door indicating style and finish. 3. Keying schedule resulting from coordination between Owner and hardware supplier. 4. Upon completion of project, submit "As Built" hardware schedule to Owner. 5. Provide doors proper openings and grout pockets in door frames shown to have future security door hardware connection. 6. Following devices shall be installed at this time, but only wired into junction box location shown in electrical attachment. a. Electric strike: Von Duprin 6000 Series. b. Electric retraction device: Von Duprin EL9875. c. Door position switch: Locknetics 7764. d. Electrical power transfer. Von Duprin EPT-2. 7. Power supply will be provided by others. Backbox and raceway for card reader shall be provided by electrical contractor for installation by others. 1.04 ACTION SUBMITTALS A. Shop Drawings: Indicate locations and mounting heights of each type of hardware. 1.05 KEYING A. Door locks: Match Owner's existing keying scheme. B. Prepare detailed kéying schedule in consultation with Owner. C. Use construction master key system for locks and cylinders. D. Supply 2 cut keys for each lock and 3 blank keys for each lock to be cut as directed by Owner. Provide 3 master keys. E. Send change keys with locks to project site. Ship master keys and control keys via registered mail to Owner. 1.06 DELIVERY, STORAGE, AND HANDLING A. Deliver hardware to project site in manufacturer's original labeled containers. B. Securely store hardware items in clean, dry place.
HARDWARE 25138.02.00 Page 2 - SECTIÓN 08 70 00 ms1505 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Butts: 1. Bommer Industries, Inc. (BOM) 2. Hager Hinge Co. (HAG) 3. McKinney. (McK) 4. Stanley Hardware. (ST) B. Locksets: 1. Best Access Systems. (BST) 2. Kaba llco Corp (KI) 3. Sargent Mfg. Co. (SAR) 4. Schlage Lock Co. (SCH) 5. Yale Security Inc. (YAL) 6. Simplex Access Control Corp. (SIM) C. Closers: 1. LCN Closers. (LCN) 2. Norton. (NOR) 3. Rixson-Firemark. (RIX) 4. Sargent Mfg. Co. (SAR) D. Exit devices: 1. Sargent Mfg. Co. (SAR) 2. Von Duprin, Inc. (VON) 3. Yale Security Inc. (YAL) E. Auxiliary hardware: 1. Hager Hinge Co. (HAG) L. 2. Hiawatha, Inc. (HIA) 3. Ives. (IVE) F. Cylinders: 1. ME 10T-0200-DAS-26. 2. ME 20T-20051-DAS-26. 3. Schlage style cam. G. Thresholds, weatherstripping, and seals: 1. National Guard Products, Inc. (NGP) 2. Pemco Mfg. Co. (PEM) 3. Reese Enterprises, Inc. (RES) 4. Zero International, Inc. (ZER) 2.02 HARDWARE A. Provide items as listed in "Hardware Schedule" at end of this Section, complete to function as designed. B. Butt hinges: 1. Quantity; a. Two hinges per leaf through 60" (1500 mm) in height. b. Three hinges per leaf through 90" (2250 mm) in height. c. One additional hinge per leaf for each additional 30" (750 mm) in height, or fraction thereof. d. Four hinges for Dutch doors. Size: a. 4" x 4" (100 mm x 100 mm) for 1-3/8" (35 mm) thick doors. b. 4-1/2" x 4-1/2" (113 mm x 113 mm) for 1-3/4" (45 mm) thick doors, to 36" (900 mm) wide.
ms1505 SECTION 08 70 00 - Page 3 c. 5" x 4-1/2" (125 mm x 113 mm) for 1-3/4" (45 mm) thick doors, over 36" to 48" (900 mm to 1200 mm) wide. d. 6" x 4-1/2" (150 mm x 113 mm) for 1-3/4" (45 mm) thick doors, over 48" (1200 mm) wide. 3. e. 5" x 5" (125 mm x 125 mm) for 2-1/4" (56 mm) thick doors, to 42" (1050 mm) wide. Provide nonremovable pins on exterior out-swinging doors and at other locations specified in Hardware Schedule. C. Lockset design:following lockset designs are manufactured by Schlage, and are identified for reference purposes only. 2. Mortise locksets: "06" squared return lever, with escutcheon plate. 3. Provide removable core system for keyed locks. D. Closers: 1. Type: Hold-open. 2. Furnish drop plates and mounting brackets as necessary for door and jamb conditions. 3. Mount closers on room side of corridor doors, stair side of stairway doors, and interior side of exterior doors, unless noted otherwise. 4. Furnish through bolts on closers mounted on mineral core doors. 5. Closers on exterior doors shall have cold weather fluid, and shall be of type that controls closing of door with built-in door stop effective at point selected at installation. Door stop shall be cushioned by shock absorbing heavy-duty spring action effective at pivot. 6. Provide parallel arm closers where possible. 042 E. Wall stops: 1. Provide wall stops at doors that open against walls. 2. Provide convex type insert, except where operating mechanisms on the hardware striking the wall stop requires a concave insert. F. Weatherstripping: Provide seals for head, jambs, and sill as shown on Hardware Schedule. 2.03 FINISHES A. Hardware and accessories: Unless specified otherwise, 630 (US32D), satin stainless steel. B. Closers: Manufacturer's standard 628 brushed aluminum covers. C. Weatherstripping: Clear anodized aluminum, unless noted otherwise. D. Thresholds: Mill aluminum, unless noted otherwise. PART 3 EXECUTION 3.01 INSTALLATION A. Install hardware in accordance with manufacturer's recommendations, using proper templates. B. Install hardware at mounting heights recommended by BHMA. C. Fit mortised items, then removed and stored in original containers until painting and finishing has been completed, then properly reinstall in permanent place. D. Upon completion, check and adjust all hardware for proper operation. Submit installation instructions, templates, adjusting tools and keys to Owner. E. Mount weatherstripping prior to installation of closers or other hardware. Make allowance for mounting closer where weatherstripping is designed to accept arm of closer or overhead stop.
HARDWARE 25138.02.00 Page 4 - SECTION 08 70 00 ms1505 3.02 INSPECTION A. Upon completion of installation, inspect and test for function and performance, and adjust to optimum working condition. B. Clean hardware to restore original finish. 3.03 HARDWARE SCHEDULE A. Quantities listed in Hardware Schedule are for each door opening occurrence. L Item Quantity Manufacturer Model HW-1: Exterior Single Entrance Doors with Card Access and Door Position Switch Butts - ST FBB199 Exit Device 1 VON EL99574/6 (Mortise Lever) Request to Exit Device 1 ST SU100 Lockset 1 SCH L9453 Electric Power Transfer 1 VON EPT-2 Power Supply 1 VON PS914 Door Position Switch 1 SCH 7764 (Concealed) Card Reader See Electrical Drawing Closer 1 LCN 4111 Spring Cush Head/Jamb Seals 1 set ZER 328A Sill Sweep 1 ZER 328A Rain Drip 1 ZER Series 148, Part 142 Threshold 1 ZER 545A HW-2: Exterior Double Entrance Doors with Card Access and Door Position Switch Butts - ST FBB199 Exit Device 1 VON EL9957-#6 (Mortise Lever) - Active leaf Request to Exit Device 1 ST SU100 Lockset 1 SCH L9453 Electric PowetTransfer 1 VON EPT-2 Power Supply 1' VON PS914 Door Position Switch 1 SCH 7764 (Concealed) Card Reader See Electrical Drawing Flush Bolts 1 set IVE FB458 (Top & Bottom Bolts - Inactive leaf). DP2 for Bottom Bolt. Dummy trim 1 SCH L0172 (Inactive leaf) Closer 1 LCN 4111 Spring Cush Head/Jamb Seals 1 set ZER 328A Sill Sweep 1 ZER 328A Astragal 1 ZER 328A Rain Drip 1 ZER Series 148, Part 142 Threshold 1 ZER 545A-V3
ms1505 SECTION 08 70 00 - Page 5 Item Quantity Manufacturer Model HW-3: Storeroom Doors Butts -- ST F179 Lockset 1 SCH ND80PD (Storeroom) Floor Stop 1 IVE FB436 1) A. Baharani 2) D. Sarkar END OF SECTION