MB-i67Q0 Micro-ATX Industrial Motherboard Quick Installation Guide Version.2 Form Factor Micro-ATX Industrial Motherboard CPU Intel LGA55 Socket Processors Chipset Intel PCH Q67 I/O PCIe/ PCI/ SATA/ USB/ COM/ LPT Video DVI-I LAN Intel 82579LM PCIe 0/00/000 Base-T Ethernet, Intel 82583V PCIe 0/00/000 Base-T Ethernet Audio Realtek ALC886 HD Audio Codec Technical Support If you have any technical difficulties, please consult the user s manual first at: ftp://ftp.arbor.com.tw/pub/manual Please do not hesitate to call or e-mail our customer service when you still can not find out the answer. http://www.arbor.com.tw E-mail: info@arbor.com.tw Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Copyright 202 All Rights Reserved. 404267000020P - -
Specifications Form Factor CPU Chipset Micro-ATX Industrial Motherboard Support 2 nd and 3 rd Generation Intel Core i7/i5/i3/pentium / Celeron processors in LGA55 socket Intel PCH Q67 System Memory 4 x 240-pin DDR3 DIMM Sockets, supporting 066/333MHz SDRAM up to 32GB Integrated Intel HD Graphics Display x DVI-I connector supports either Analog RGB or DVI, resolution up to 2048 x 536 for Analog RGB and 920 x 200 for TMDS Ethernet x Intel 82583V Gigabit Ethernet Controller x Intel 82579LM Gigabit Ethernet PHY w/ iamt I/O Chip Fintek F7869ED + Fintek F826AD BIOS AMI BIOS 4 x Serial ATA 300MB/s HDD transfer rate Serial ATA 2 x Serial ATA 600MB/s HDD transfer rate Support Intel Rapid Storage Technology Support RAID 0..5.0 Parallel Port x LPT port, supporting SPP/EPP/ECP mode selectable Serial Port 4 x COM ports: COM~3 RS-232, COM4 RS-232/422/485 selectable w/ auto flow control x PCIe x6 slot Expansion Bus x PCIe x slot x PCIe x4 interface in x8 slot x PCI slot Universal Serial Bus 4 x USB 2.0 ports Watchdog Timer ~255 levels reset Dimension (L x W) 244 x 244 mm (9.6 x 9.6 ) Digital I/O 6-bit programmable Digital Input/Output KBMS x 6-pin wafer connector for PS/2 keyboard and mouse Audio Realtek ALC886 HD Audio Codec, Mic-in/Line-in/Line-out Power Consumption 6.5A@+2V, 2.2A@5V,.3A@3.3V (Typical) with Intel Core i7-2600 3.4GHz processor Power Requirement 24-pin + 4-pin ATX connector Certification CE/FCC class B Operating Temp. 0ºC ~ 60ºC (32 ~ 40ºF) Storage Temp. -20ºC ~ 80ºC (-4 ~ 76ºF) Humidity 0% ~ 95% non-condensing - 2 -
Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: x MB-i67Q0 Industrial Motherboard x Driver CD x Quick Installation Guide x I/O Bracket If any of the above items is damaged or missing, contact your vendor immediately. Ordering Information MB-i67Q0 Intel LGA55 socket Core i7/i5/i3 / Pentium / Celeron embedded Micro-ATX motherboard Optional Accessories CPF-67Q0-C (262424600P) CBK--67Q0-00 (6967000000P) CPU Cooling Fan for LGA55/56 CPU Cable kit 6 x SATA cables x LPT cable 2 x Two ports COM cables 2 x Two ports USB cables - 3 -
Recommended CPU List Intel 3rd Generation i7-3770 3.4GHz Core Processor i5-3550s 3.0GHz Core Processor i3-3220 3.3GHz Core Processor Intel 2nd Generation i7-2600 3.4GHz Core Processor i5-2400 3.GHz Core Processor i3-220 3.3GHz Core Processor G850 2.9GHz Pentium Dual Core Processor G540 2.5GHz Celeron Dual Core Processor The Installation Paths of CD Driver V. 4.2A Windows XP Driver Path CHIPSET \CHIPSET\INF 9.2.0.02 NET Framework \NET Framework\NET Framework 3.5 AMT \ME\MEI_allOS_7..3.088 GRAPHICS \GRAPHICS\INTEL_2K_XP_32\539 LAN \ETHERNET\INTEL\82583V\WINXP_32_Ver6 \ETHERNET\INTEL\82583V\WINXP_64_Ver6 AUDIO \AUDIO\REALTEK_HD\WDM_R267 Windows 7 Driver Path CHIPSET \CHIPSET\INF 9.2.0.02 AMT \ME\MEI_allOS_7..3.088 GRAPHICS \GRAPHICS\Win7Vista_522 LAN \ETHERNET\INTEL\82583V\WIN7_32_Ver6 \ETHERNET\INTEL\82583V\WIN7_64_Ver6 AUDIO \AUDIO\REALTEK_HD\Vista_Win7_R262-4 -
Board Dimensions 6.35 63.83 229.87 33.02 0.6 65. 243.84 237.49 209.55 243.84 Unit: mm 9.76 42.4 75.05 96.9 8.38 37.38-5 -
Jumpers/ Connectors Quick Reference Jumpers Connectors Label Description Label Description JBIOS BIOS Update Port ATX2V ATX +2V Connector JP2 Intel ME Mode Selection FAN~3 Fan Power Connectors JP2 CMOS Setup ATX ATX Power Connector JP6 AT/ATX Selection SATA~6 Serial ATA Connectors JRS2 COM4 RS-232/422/485 JFRT Switches and Indicators Selection COM2~3 Serial Port Connectors Connector KB/MS Power Source JKBMS Selection COM4 RS-232/422/485 LPT Parallel Port AUDIO Audio Interface Port AUDIO3 AUX Audio Connector LAN~2 RJ-45+USB Stacked Connectors USB~3 USB Connectors DVI COM & DVI-I PS/2 Keyboard and USB KBMUSB Stacked Connector JDIO Digital I/O Connector - 6 -
Jumpers & Connectors Location 3 SATA2 2 4 SATA3 5 SATA SATA4 6 SATA5 7 SATA6 0 ATX FAN2 JBIOS 9 FAN 8 JFRT 2 4 JP2 JP2 33 JDIO PCI 5 JP6 9 FAN3 PCIE3 20 COM3 2 COM2 8 7 ATX2V JKBMS PCIE PCIE2 22 COM4 23 LPT 32 KBMUSB 28 27 26 25 24 AUDIO3 6 3 DVI 29 USB2 USB3 LAN LAN2 AUDIO JRS2 30 USB KB/MS Line in/out/mic USB COM/DVI-I USB*4 LAN/USB LAN/USB - 7 -
2 8 7 Jumpers Jumper Settings The jumper is short (closed) when the jumper cap is placed on pins. If not, that means the jumper is open. JKBMS: KB/MS Power Source Selection (7) Connector type: 2.54mm pitch x3-pin header. Pin Voltage -2 5V (Default) 3 2 Pin open Pin short (closed) Pin 2-3 short (closed) Pin -2 short (closed) 2-3 5VSB 3 2 JBIOS: BIOS Update Port () Connector type: 2.54mm pitch 2x4-pin header. 3.3V 2 GND 3 CS0# 4 CLK 5 SO 6 SI 7 N/C 8 N/C JP2: Intel ME Mode Selection (2) Connector type: 2.54mm pitch x3-pin header. Pin Description Connectors ATX2V: ATX +2V Connector (8) Connector type: 4-pin ATX 2V connector. ATX2V supplies +2V for CPU operation. 2 GND 2 GND 3 +2V 4 +2V 3 4-2 Disable ME 2-3 Enable ME (Default) 3 2 3 2 FAN, 2, 3: Fan Power Connectors (9,, 9) Connector type: 2.54mm pitch x4 wafer one wall connector. JP2: CMOS Setup (4) Connector type: 2.00mm pitch x3-pin header. Pin Voltage -2 Normal (Default) 3 2 Pin Description GND 2 +2V 3 FAN_IN 4 FAN_CTL 2 3 4 2-3 Clear CMOS JP6: AT/ATX Power Selection (5) Connector type: 2.54mm pitch x3-pin header. Pin Description -2 ATX (Default) 2-3 AT 3 2 3 2 3 2 JRS2: COM4 RS-232/422/485 Selection (6) Connector type: 2.00mm pitch 2x3-pin header. Mode RS-232 (Default) RS-422 RS-485-2 Short Open Open 3-4 Open Short Open 5-6 Open Open Short SATA~6: Serial ATA Connectors (2~7) Connector type: lockable SATA connectors with housing. SATA~2 support 600MB/s HDD transfer rate. SATA3~6 support 300MB/s HDD transfer rate. Pin Description GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND 2 2 2 5 6 5 6 5 6-8 -
ATX: ATX Power Connector (0) Connector type: 24-pin ATX Power Supply connector. +3.3V 3 +3.3V 2 +3.3V 4-2V 3 GND 5 GND 4 +5V 6 PS-ON 5 GND 7 GND 6 +5V 8 GND 7 GND 9 GND 8 PW-OK 20-5V 9 +5VSB 2 +5V 0 +2V 22 +5V +2V 23 +5V 2 +3.3V 24 GND 3 24 2 JFRT: Switches and Indicators (8) It provides light indication of the computer activities and switches to change the computer status. Connector type: 2.54mm pitch 2x8 pin header. Power LED System Reset HDD LED SMBus 2 5 6 Power Button Speaker+ Speaker- Pin Description Pin Description LED- 2 LED+ 3 PWRBTN- 4 PWRBTN+ 5 RESET- 6 RESET+ 7 HDD LED+ 8 GND 9 HDD LED- 0 SPEAKER+ SMB_CLK 2 SPEAKER+ 3 SMB_DATA 4 SPEAKER- 5 GND 6 SPEAKER- AUDIO: Audio Interface Port (25) Connector type: 3 x 3.5mm phone jack stacked. Audio Jack Description Line in Blue Line-in Line out Green Line-out Pink Mic-in Mic COM2, 3: Serial Port Connectors (2, 20) Connector type: 2.00mm pitch 2x5-pin box header. DCD 2 RXD 2 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 0 9 RI 0 N/C COM4: RS-232/422/485 Connector (22) Connector type: 2.54mm pitch 2x7-pin header. DCD 2 RXD 2 3 TXD 4 DTR RS-232 5 GND 6 DSR 7 RTS 8 CTS 9 RI 0 N/C RS-485 422TX+485+ 2 422TX-485-3 4 /422 3 422RX+ 4 422RX- LPT: Parallel Port (23) Connector type: 2.54mm pitch 2x3-pin box header. #STROBE 2 #AUTO FEED 3 DATA0 4 #ERROR 5 DATA 6 #INITIALIZE 7 DATA2 8 #SELECT INPUT 9 DATA3 0 GND DATA4 2 GND 3 DATA5 4 GND 5 DATA6 6 GND 7 DATA7 8 GND 9 #ACKNOWL- 20 GND EDGE 2 BUSY 22 GND 23 PAPER EMPTY 24 GND 25 SELECT 26 N/C 2 25 26 AUDIO3: AUX Audio Connector (24) Connector type: 2.54mm pitch 2x5-pin box header. Pin Description Pin Description MIC2_L 2 GND 2 3 MIC2_R 4 PRESENCE 5 LINE2_R 6 MIC2_JD 7 SENSE 8 N/C 9 0 9 LINE2_L 0 LINE2_JD - 9 -
C5 LAN, 2: RJ-45+USB Stacked Connectors (27, 26) Connector type: RJ-45 connector with LED/Stacked USB type A connector. LAN (RJ-45) Pin Desc. Pin Desc. A TCT VCC A2 M0+ A3 M0- A4 M+ A5 M- A6 M2+ A7 M2- A8 M3+ A9 M3- A0 RCT GND A LED Y- A2 LED Y+ A3 LED2 G-O+ A4 LED2 G+O- USB (USB type A connector) B +5V B5 +5V B2 USBD- B6 USBD2- B3 USBD+ B7 USBD2+ B4 GND B8 GND H GND H5 GND H2 GND H6 GND H3 GND H7 GND H4 GND H8 GND USB3: USB Connector (28) Connector type: 4 stack USB type A connector. 5V 2 5V 2 USBD- 22 USBD2-3 USBD+ 23 USBD2+ 4 GND 24 GND 3 5V 4 5V 32 USBD3-42 USBD4-33 USBD3+ 43 USBD4+ 34 GND 44 GND G GND G4 GND G2 GND G5 GND G3 GND G6 GND USB, 2: USB Connectors (30, 29) Connector type: 2.54mm pitch 2x5 pin header. +5V 2 +5V 3 USBD- 4 USBD2-5 USBD+ 6 USBD2+ 7 GND 8 GND 9 N/C 0 N/C 2 9 0 DVI: COM & DVI-I (3) Connector type: Male type 9-pin D-SUB connector+female type DVI-I connector. DVI-I 5 6 9 COM 8 C C2 9 6 7 24 C3 C4 DVI-I TX2-3 TX3+ 2 TX2+ 4 +5V/50mA 3 TX2/4GND 5 GND 4 TX4-6 HTPLG 5 TX4+ 7 TX0-6 DDC_CLK 8 TX0+ 7 DDC_DATA 9 TX0/5GND 8 CRT_Vsync 20 TX5-9 TX- 2 TX5+ 0 TX+ 22 TXC_GND TX/3GND 23 TXC+ 2 TX3-24 TXC- C Analog RED C2 Analog Green C3 Analog Blue C4 Analog V_SYNC C5 Analog R, G, B Return COM DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 0 N/C KBMUSB: PS/2 Keyboard and USB Stacked Connector (32) Connector type: 6-pin Mini-DIN/Stacked USB type A connector. MS_CLK KB_VCC MS_DAT Keyboard (Purple) KB_CLK KB_GND KB_DAT - 0 -
JDIO: Digital I/O Connector (33) Supports 6-bit programmable Digital Input/Output Connector type: 2.00mm pitch 2x0-pin headers DIO0 2 DIO 2 3 DIO2 4 DIO3 5 DIO4 6 DIO5 7 DIO6 8 DIO7 9 DIO8 0 DIO9 DIO0 2 DIO 3 DIO2 4 DIO3 5 DIO4 6 DIO5 7 VCC 8 GND 9 20 9 VCC 20 GND - -
This page is intentionally left blank. - 2 -