Service Instruction Document Number: This document is produced and reserved for Unitron service centers and for trained authorized service departments exclusively. : Electrostatic discharge sensitive devices Take ESD precautionary measures whenever handling electronic devices 0543 Products and models ehind-the-ear hearing instruments Shine Rev 4 M Copyright 24 Unitron unitron.com Page: 1 of 9
Table of contents General information 3 Equipment and materials... 3 Delivery settings... 3 Colour selections... 4 Tools and fixtures... 4... 5 Explode view... 5 Spare parts list... 5 Repair information 6 Disassembly... 6 ssembly... 7 History 9 Copyright 24 Unitron unitron.com Page: 2 of 9
General information Equipment and materials Category Description Part no./download Service tools See section Tools and fixtures Software TrueFit 2.4or higher Extranet u:set 4.4 or higher Programming cables Programming cable CS44 (Unitron Version) 058-5005 (blue) 058-5006 (red) Cable style 4 black 058-5059 Cable tool kit 054-5307 atteries 312 Documentation Technical Data Extranet SI-099 coustic Coupling Guide Delivery settings Model Program 1 - utomatic 3 Program 2 Shine Rev 4 M Quiet Speech-in-noise Noise - Copyright 24 Unitron unitron.com Page: 3 of 9
Colour selections UNCONTROLLED COPY IF PRINTED The table below shows the Unitron standard tone on tone colors for Colour Number Colour Description Conversion Kit (048-5146-xx) attery Door (004-6653-xx1) eige 03 rown 05 Light Gray 06 lack 12 Dark Gray 35 Taupe Tools and fixtures Pin removal tool (002-0404-1) Cable tool kit (054-5307) Measurement tool (026-0697) dapter plate for 2CC coupler (brass) (002-0412) Copyright 24 Unitron unitron.com Page: 4 of 9
Explode view UNCONTROLLED COPY IF PRINTED 6 5 2 4 10 1 3 1 3 12 9 7 ( 8 ) Spare parts list Pos Description Lot size Part Number 1 Conversion Kit for 1 048-5146-xx* 2 Pin 0.7 x 7.15 mm titanium 10 002-0461-1 3 Pin 0.7 x 5.9 mm titanium 10 002-5043-1 4 Toggle cover 10 005-0420-1 5 Middle Cover Moda3 10 004-6639-0 6 Push utton Moda3 10 004-6621-131 7 Code pin right red 10 004-0279-1 8 Code pin left blue 10 004-0279-071 9 ID plate u Printed 10 004-6925-051 10 Tone Hook HE10 680 10 004-8028-0 11 attery Door Moda3 Printed/Coated 10 004-6653-xx1* 12 SEM NH20 TE 312 (non wireless) 1 045-5369-2 11/1 * The xx in part numbers signify colour designation, see Colour Selection section for available colours. Number denotes Lot Size; Quantities ordered must be in multiples of Lot Size only. Copyright 24 Unitron unitron.com Page: 5 of 9
Repair information Disassembly 1 ) Remove earhook (or slim tube) 2 ) Remove pins. Remove battery door 3 Lift top shell by microphones. 4 ) Remove pin, ) push MM inward slightly, C) lift and remove middle cover. C Copyright 24 Unitron unitron.com Page: 6 of 9
5 ) Remove electronics ) Lift button cover from electronics 6 Remove ID plate ssembly 1 Install ID plate into bottom shell 2 ) place button cover onto push button ) insert electronics into bottom shell. Leaving about 1 mm still to go. C Copyright 24 Unitron unitron.com Page: 7 of 9
3 ) Insert middle cover by earhook and press into place while fully seating electronics into bottom shell. 4 Install push button into top shell. Place top shell into bottom shell and snap into place. ) Install pin. 5 Position battery door into shell. 6 ) Install pins into shell. ) Install earhook (or slim tube). Copyright 24 Unitron unitron.com Page: 8 of 9
History The signed original of this document is stored in the Information Control Dept. Unitron Hearing Ltd., Kitchener, ON, Canada Detail uthor pproved Date Initial release bdb 15 ug 24 Copyright 24 Unitron unitron.com Page: 9 of 9