VTC Series video cart basic dimensions front view monitor and camera mounts removed for clarity rear view UCP laser knockout panel handles for rolling cart 3 [76] cable grommet laser knockout 5.4 [138] panel height 6 avip laser knockout panel 50.9 [1294] relocatable panel w/ laser knockouts 20.5 [521] panel width 60.0 [1524] 43.5 [1106] 1.1 [27] floor clearance 41.9 [1065] 28.0 [711] 4 [102] rear locking casters section a-a partial view 10 Ø.625 [16] VHF/UHF antenna knockout 16.0 [405] 15 amp power strip w/8 outlets and 120 [3048] cord included (PD-815SC) Lever Lock plate & channels for component mounting 4 sp rackrail for vertical equipment mounting adjustable every 1.38 [35] 11.4 [288] 2 sp lower rackrail ideal for UPS mounting 3 sp rackrail 3.5 [88] 4.1 [105] soft close hinge 12.5 [318] 19.7 [501] 23.2 [589] rear access panels removed for clarity section b-b laser knockout for included lock (keyed differently than locking rear access panels) 19.3 [489] Note: model no. shown 8.0 [203] 25.2 [641] what great systems are built on. 2
video cart with rack basic dimensions front view front door removed for clarity rear view 12 sp rack 6.3 [159] 27.0 [686] shelf size 20.6 [523] heat vents from rack through top 21.1 [535] 31.2 [793] 16.7 [423] rear view section a-a 20.2 [512] 10-32 threaded rackrail 14.5 [368] usable depth tempered glass front door rear access panels and front door removed for clarity Note: model no. -R shown -R VTC-4255D VTC-4255D-R -R 4 sp rackrail for vertical mounting 12 sp rack w/ tempered glass front door 3
monitor mount basic dimensions Display Width VES Pattern ccommodation C VES Pattern ccommodation.34 [9] 18.50 [13] & -R 80 [2032] and under up to VES 900 up to VES 400 C 21.0 [533] 19.21 [488] VTC-4255D & VTC-4255D-R 47 [1194] and under up to VES 600 up to VES 400 55 [1397] and under up to VES 400 up to VES 400 4 2.25 [57] & -R 63 [1600] and under up to VES 600 up to VES 400 71 [1803] and under up to VES 400 up to VES 400 display mount bracket hole pattern D E D E 21.0 [533] ref horizontal mounting bracket is adjustable to: 55.64 [1413] 53.01 [1346] 50.39 [1280] Single or Dual Displays Color Display Size Ma Display Weight Lb [kg] D Horizontal Length E Ma Distance Outer Verticals single nickel 42 [1067] to 80 [2023 250 [113] 38.00 [965] 35.75 [908] -W single black 42 [1067] to 55 [1397] 250 [113] 38.00 [965] 35.75 [908] -R single nickel 42 [1067] to 80 [2023] 250 [113] 38.00 [965] 35.75 [908] -RW single black 42 [1067] to 55 [1397] 250 [113] 38.00 [965] 35.75 [908] VTC-4255D dual nickel 42 [1067] to 55 [1397] 125 [57] (total: 250 [113]) 74.00 [1880] 71.75 [1822] VTC-4255D-W dual black 42 [1067] to 55 [1397] 125 [57] (total: 250 [113]) 74.00 [1880] 71.75 [1822] VTC-4255D-R dual nickel 42 [1067] to 55 [1397] 125 [57] (total: 250 [113]) 74.00 [1880] 71.75 [1822] VTC-4255D-RW dual black 42 [1067] to 55 [1397] 125 [57] (total: 250 [113]) 74.00 [1880] 71.75 [1822] dual nickel 56 [1422] to 70 [1778] 125 [57] (total: 250 [113]) 90.00 [2286] 87.75 [2229] -W dual black 56 [1422] to 70 [1778] 125 [57] (total: 250 [113]) 90.00 [2286] 87.75 [2229] -R dual nickel 56 [1422] to 70 [1778] 125 [57] (total: 250 [113]) 90.00 [2286] 87.75 [2229] -RW dual black 56 [1422] to 70 [1778] 125 [57] (total: 250 [113]) 90.00 [2286] 87.75 [2229] 4
camera mount basic dimensions top camera mount bottom camera mount top/bottom mounting plate included with mount maimum camera mount height 26.5 [674] minimum camera mount height 25.7 [652] 12 [305] 8 [207] slot for 1/4-20 [m6] camera mounting hardware Top/bottom camera mount - can be mounted in any location horizontally above or below display, with the eception of where display mount brackets and posts are located. Display mount bracket locations are based upon location of the vesa mounting holes on each specific display. between-display camera mount maimum camera mount height: 9.8 [249] between-display mounting plate included with mount 8 [203] 8 [206] minimum camera mount height: 8.2 [208] slot for 1/4-20 [m6] camera mounting hardware etween-display camera mount - can be mounted between two displays in any location ecept for the solid parts of the display mounting bracket. This location is based upon the specific displays used. -R VTC-4255D VTC-4255D-R -R Mounting Location above or below display above or below display 5
speaker shelf basic dimensions speaker grille 19.4 [493] shelf is adjustable every 1.38 [35] 20.5 [521] black speaker cloth 20.8 [528] 18.9 [481] 7.4 [188] 8.0 [203] usable depth section b-b Ø.2 [4] 1.3 [32] ob typ 2.2 [56] 2.5 [63] Panel Height Speaker rea VTC-SPK-SH5.5 5.4 [138] 4.3 [110] VTC-SPK-SH11 10.9 [227] 9.8 [249] 6
accessories basic dimensions VTC-WS-32X12SL work surface is adjustable in 1 [25] increments 1.1 [29] 12.0 [305] shelf height 32.0 [813] VTC-DWR-5.5 2 [51] cable grommet 7.5 [190] 7.9 [201] slide travel 6.2 [158] 7.6 [193] interior depth latch with lock (keyed the same as rear access panels) 16.6 [422] interior width section - 5.4 [138] 4.8 [121] interior height 20.5 [521] Minimum Work Surface Height Maimum Work Surface Height 32 [813] 48 [1219] -R 36 [914] 48 [1219] VTC-4255D 32 [813] 48 [1219] VTC-4255D-R 36 [914] 48 [1219] 32 [813] 48 [1219] -R 36 [914] 48 [1219] 7