LIGHTPLANE 3 ROUND RLP3 Find additional images and information at alwusa.com/rlp3
1. BASE MODEL RLP3S* 3" suspended RLP3SM.6.4 1 3" wall, stem mount with 6" arms and JBOX-4 canopy RLP3SM.6.2 2 3" wall, stem mount with 6" arms and JBOX-2 canopy RLP3SM.12.4 1 3" wall, stem mount with 12" arms and JBOX-4 canopy RLP3SM.12.2 2 3" wall, stem mount with 12" arms and JBOX-2 canopy RLP3SM.18.4 1 3" wall, stem mount with 18" arms and JBOX-4 canopy RLP3SM.18.2 2 3" wall, stem mount with 18" arms and JBOX-2 canopy RLP3SM.24.4 1,3 3" wall, stem mount with 24" arms and JBOX-4 canopy RLP3SM.24.2 2,3 3" wall, stem mount with 24" arms and JBOX-2 canopy 1 4" JBOX by others 2 2" JBOX included 3 Tie-backs standard for 24"arms Page 2 of 6 Type: 2. RUN LENGTH/ SIZE Individual (2, 3, 4, 5', 6, 7 or 8 ) Continuous row or Configuration 1 (enter total linear length, ex: 20 ) All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required. 3. LAMPING DIRECT LED 4 LOW 5 MED HI 5 TUNE 6 DECOR 5 RGB None. Select when specifying only Indirect Lamping Pair lamping with CCT (where applicable), ex: MED/2700K Low-output, high-performance LED 641 delivered lm/ft, 7.3 W/lf, 88 lm/w Medium-output, high performance LED 854 delivered lm/ft, 9.7 W/lf, 88 lm/w High-output, high-performance LED 1068 delivered lm/ft, 12.1 W/lf, 88 lm/w Tunable white LED, 2700K-5700K 712 delivered lumens, 8.1 W/lf, 88 lm/w Decorative constant voltage LED, 285 delivered lm/ft, 4.4 W/lf, 65 lm/w 3000K 3500K 4000K Color-changing RGB LED, 5 W/lf 4 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 5 Performance calculations are extrapolated estimates based on the actual IES test results of MED option at 3500K with an HT lens 6 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs based on the actual IES test results of MED option at 3500K with an HT lens. Cooler and warmer CCT settings will provide lower delivered lumens, lower lm/w and higher W/lf. *Lightplane Round 3 is DesignLights Constortium Qualified Product when configured as: RLP3S-XX-MED-0/10v/10%-HT-LOW-0/10v/10%-3500K-CL-AL-120 Verify configuration by searching for "Architectural Lighting Works" at designlights.org/qpl
4. DRIVER DIRECT LED 0/10V/ None. Select when specifying only Indirect Lamping 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10% 10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% HILUME/A3 Lutron Hi-Lume A L3D EcoSystem or three-wire control, dimming to 1% Page 3 of 6 5. LENS DIRECT EXT HT None. Select when specifying only Indirect Lamping Extra diffuse High transmission, clear lens with frosted film 6. LAMPING INDIRECT LED 7 LOW 8 MED HI 8 TUNE 8 DECOR 8 RGB None. Select when specifying only Direct Lamping Pair lamping with CCT (where applicable), ex: MED/2700K Low-output, high-performance LED 678 delivered lm/ft, 7.2 W/lf, 94 lm/w Medium-output, high performance LED 904 delivered lm/ft, 9.6 W/lf, 94 lm/w High-output, high-performance LED 1130 delivered lm/ft, 12.0 W/lf, 94 lm/w Tunable white LED, 2700K-5700K 753 delivered lumens, 8.0 W/lf, 94 lm/w Decorative constant voltage LED, 301 delivered lm/ft, 4.4 W/lf, 68 lm/w 3000K 3500K 4000K Color-changing RGB LED, 5 W/lf 7 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 8 Performance calculations are extrapolated estimates based on the actual IES test results of MED option at 3500K with an HT lens 9 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs based on the actual IES test results of MED option at 3500K with an HT lens. Cooler and warmer CCT settings will provide lower delivered lumens, lower lm/w and higher W/lf. 7. DRIVER INDIRECT LED 0/10V/ None. Select when specifying only Direct Lamping 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10% 10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% HILUME/A3 Lutron Hi-Lume A L3D EcoSystem or three-wire control, dimming to 1%
8. LENS INDIRECT CL 10 EXT HT None. Select when specifying only Direct Lamping. Clear lens, highest transmission value (indirect only) Extra Diffuse Lens High transmission, clear lens with frosted film Page 4 of 6 10 Lens pixelation will be visible; may not be suitable for applications where indirect portion may be seen from above 9. FINISH AL BK WH RAL/ Standard, natural Ultimatte aluminum Black powdercoat White powdercoat Specify RAL powdercoat code (ex: #RAL/3003) 10. VOLTAGE 120 120 volt 277 277 volt UNV Universal voltage 347 11 347 volt 11 Driver/ballast options may be limited with 347 voltage. Consult factory. 11. ADDITIONAL OPTIONS COMBO EMC/ 12 EMB/ 12,14 OS/ 13 PH 13 MC/ SB None Combination 4.5" canopies at feed locations with both power feed and suspension mounting hardware Emergency circuit (indicate total quantity, ex: EMC/4) Emergency battery pack (indicate total quantity, ex: EMB/4) Remote Occupancy sensor (indicate total quantity, ex: OS/4) Remote Photocell/daylight sensor (indicate total quantity, ex: PH/4) Mitered corners (indicate total quantity, ex: MC/4 for a rectangle) Seismic bracing 12,14 Consult factory for available options. EMB must be remoted when direct lighting is specified. 13 Limitations exist depending on size and specification. Consult factory for options and details LED LAMP PAIRING OPTIONS LOW MED HI LOW MED HI Limitations exist due to heat. Please follow above guidelines when specifying. Direct Indirect
DIMENSIONS Page 5 of 6 Indirect Direct Direct/Indirect 3" 3" 3" RLP3S SUSPENDED RLP3S SUSPENDED RLP3S SUSPENDED Stem Mount 3" Q The field-adjustable light channel rotates up to 330 RLP3SM STEM-MOUNT
HOUSING 100% recyclable, extruded architectural grade T6061 aluminum with.08" minimum wall thickness. ELECTRICAL Fluorescent ballasts are <10% THD Class P. Programmed-start standard. LED drivers are Class 2. L80 >50,000 hours. 80+ CRI. ETL listed for damp location with lens. LINEAR LENS OPTIONS Page 6 of 6 Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. HT is high transmission and clear with a frost film with minimal-to-no-source visibility. CL is clear with the most light output, but has source visibility. EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details. SUSPENSION HARDWARE EXT and HT Lens CEILING HARDWARE (1) 4.5" canopy per power feed location, (1) bullet mount, (1) 8' aircraft cable and (1) 2" canopy (for use with T-bar mounting) per suspension point COMBO CANOPY Choose option COMBO to specfiy 4.5" canopies at feed locations with power feed and aircraft cable suspension mounting FINISH Standard finish is "Ultimatte" aluminum a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black and color RAL powdercoat options also available. OPTIONS Eye Bolt (By Others) Gripper w/hook 2-Cable Clamp Aircraft Cable SEISMIC BRACING Add-on hardward includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point ALUMINUM AL BLACK BK WHITE WH COLOR RAL