Applicable Model(s) (Destination) Serial Number(s) Number of Unit(s) BKM-FW50/1 SYU BKM-FW50/2 SYU BKM-FW50/3 SYU BKM-FW50/4 SYU BKM-FW50/5 SYU [Title] How to update BKM-FW50 Firmware for ver4.09 (image_debug ver4.12) [Object Serial Range] 2000001 ~ 2007569 After this serial number, the unit is applied F/W ver.4.09 [The purpose of update] 1) Adaptation for GXD-L52H1. 2) Display can not operate AUTO Adjust during Loading picture with BKM-FW50. This problem is improved by this new Firmware update. -> Add white outline frame during Loading picture. [Equipment] 1) PC Connected with LAN 2) Monitor (Depends on combination between FW50 and applicable monitor) [Details] <Before Update> Combine BKM-FW50 with applicable monitor, and then set IP Address. Refer to each manual about how to connect and to set IP Address. Obtain the Firmware updater program
[Procedure]. [1] Preparation (0) Preparation for PC 1 Copy files to your PC as follows; 1) Firmware updater.exe 2) vxworks_ver4.09.rom : Streaming Updater file 3) image_debug_fw50_v412.rom : Network Updater file 4) updater_fw50_v400.rom : Network Application file 5) bootloader_fw50_v309.rom : Network Application file *For 4) 5) : if the version is the same or upper than above, you don t need them. 2 Cancel Windows Firewall, if it is installed. ( How to cancel it ) Start menu Setting Control panel Select the Windows Firewall Click the No effective (1) Setting FW50 to option1 slot of Monitor.
(2) Confirm IP Address Please write down this IP Address to memo (3) Start up Internet Explorer. (4) Input http://xxx.xxx.xxx.xxx and Enter. xxx.xxx.xxx.xxx is IP Address number you get by (2). (If the first letter is 0 (ex: 043), please ignore the unmber 0.) If the below picture is displayed, it is succeeded.
(5) After inputting http://xxx.xxx.xxx.xxx/service and Enter, you re required to input User name and Password. Refer to the below picture. Input username and password. User Name: service Pass word: fwd_series *Attention: Input small letters (6) The following picture will be got on PC monitor after words. Then click Update on the menu bar.
[2] Streaming Update (7) Select Streaming Controller. Refer to the below picture. (8) Then click Apply on the menu bar in order to move Flash write mode Refer to the below picture.
(9) Picture of Flash Write Mode is as follow. (10) Start (Double click) Firmware updater.exe. Input IP Address set by (2) and then click Search. Refer to the below picture.
(11) Another window appear on firmware updater. Refer to the below picture. (12) After few minutes, Model Name Serial No. and IP Address are found automatically. And then click OK
(13) Information of Information Display is showing. Then click Next Refer to the below picture. =======Additional information from (10) to (13)======= If you cannot come to (13) as the Network connection is bad, Please try to do the way as below; ( It doesn t need, if you come to (13)) 1 Repeat from (2) to (5), and click the information as follows picture. 2 Please write down IP Address data to memo for IP Address(Controller) and IP Address(Player).
3 Repeat from (6) to (9), and input the IP address data of IP Address(Player) at (10). ----ATTENTION---- Use IP Address(Player) data for Streaming update. Use IP Address(Controller) data for Network update which explain later. 4 Crick Next and continue to (14). =======That s all for additional information======= (14) Select NETWORK from Firmware, and then click Browse. Refer to the below picture.
(15) Select Streaming and vxworks_ver 4.09.rom and click Open. Refer to the below picture.. vxworks_ver4.09.rom vxworks_ver4.09.rom (16) Needed firmware is selected on File. Then click Next. vxworks_ver4.06.rom
(17) Click Update. (18) Update is started with following picture. * Do not touch anywhere during this process. It might be cause of defect or might not finish the update.
(19) When the below picture is displayed, click Restart and Finish to finish Firmware updater. (If you don t click Restart, you cannot do well at the next update process) (20) Close internet browser on you PC [3] Network Update (21) Repeat from (3) to (6) (22) Select Network Management. (23) Repeat from (8) to (14).
(24) Select image_debug_fw50_v412.rom and and click Open. image_debug _fw50_v412.rom (25) Perform process from (16) to (19) (26) Close internet browser on you PC. * If the version have lower than [updater: ver.4.00, bootloader:ver.3.09 ] you need to continue below procedure. (27) repeat from (21) to (23) (28) Select updater_fw50_v400.rom and and click Open.
(29) Perform process from (16) to (19) (30) Close internet browser on you PC.
==== If bootloader_fw50_v309.rom is already installed, ignore (31)~(34) process ==== (31) repeat from (21) to (23) (32) Select bootloader_fw50_v309.rom and and click Open. (33) Perform process from (16) to (19) (34) Close internet browser on you PC.
(35) Confirm version below after performance from (4) to (6) Network Management : 4.12 /4.00 /3.09 Streaming Controller : 4.09 / X.XX 4.12 / 4.00 / 3.09 4.09 / 1.10 The End