S T A I R C O M P O N E N T S FITTINGS pg 42-46 RAILS pg 47 TREADS & STARTING STEPS pg 48-50 ACCESSORIES pg 51 Fittings, rails, treads and accessories provide the finishing touches that complete your stairway. Regency Stair Parts components are designed to elegantly combine with the rise and fall of all lines of newels and balusters. Whatever styles you choose, a perfect accord is achieved. 40 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
S T A I R P A R T S G U I D E OVER THE POST SYSTEM Over-The-Post All stair parts are chosen when standing at the bottom of the staircase looking upward to determine the right and left side for parts selection. Each point of transition requires a newel post to support the structure of the balustrade. All newels for this type of installation have a turned pin to receive the fitting parts. POST TO POST SYSTEM Post-To-Post As with the over-the-post system, parts are chosen when standing at the bottom of the staircase looking upward to determine the right and left side for parts selection. Here the handrail is interrupted by the newel post. At the transition to any landing you must use a long block newel or a gooseneck fitting. www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 41
S T A I R C O M P O N E N T S FITTINGS Each Regency Stair Parts handrail profile has a matching fitting profile to allow your stairway to flow exactly as you imagined. Fittings provide a continuous feel in over-the-post applications and easy transitions in post-to-post through the use of goosenecks and easings. Shown at right: Staircase featuring BAS1 balusters (pg 35), newels (pg 12), premium red oak treads (pg 48) and railing (pg 47). Also highlighted are 7030 & 7035 volutes (pg 43) and 7098 & 7099 gooseneck fittings (pg 46). (see sizes pg 43) Coped Returned Starting Easing 1/4 Turn w/no cap 60 0 Up End End w/cap 90 0 135 0 Easing 7008 7009 7010 7011 7011-135 7012 --- --- 7010-LC --- --- --- 7208 7209 7210 7211 7211-135 7212 N/A N/A 7510 7511 N/A 7512 WOOD --- --- OS / WO / MH / BC OS / WO / MH / BC --- OS / WO / MH / BC N/A N/A 7710 7711 N/A 7712 WOOD --- --- OS / MH OS / MH --- OS / MH N/A N/A 7910 7911 N/A 7912 WOOD --- --- OS OS --- OS LC = Large Cap Fittings OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry 42 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
(see sizes below) Volute w/up easing Volute w/90 0 up easing Climbing Volute HANDING Left Right Left Right Left Right 7030 7035 7030-90 7035-90 7031 7036 7230 7235 7230-90 7235-90 7231 7236 7530 7535 N/A N/A 7531 7536 WOOD OS / WO / MH / BC OS / WO / MH / BC --- --- OS / WO / MH / BC OS / WO / MH / BC 7730 7735 N/A N/A 7731 7736 WOOD OS / MH OS / MH --- --- OS / MH OS / MH 7930 7935 N/A N/A 7931 7936 WOOD OS OS --- --- OS OS OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry (see sizes below) Turnout w/up easing Small Turnout w/up easing HANDING Left Right Left Right 7040 7045 7041 7046 WOOD OS OS OS OS All Regency Stair Parts fittings are shipped with 1 taper plugs, rail bolts, templates and instructions to assist in installation. 7240 7245 7241 7246 WOOD OS OS OS OS 7540 7545 N/A N/A WOOD OS / WO / MH / BC OS / WO / MH / BC --- --- 7740 7745 7741 7746 WOOD OS / MH OS / MH OS / MH OS / MH 7940 7945 N/A N/A WOOD OS OS --- --- OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry HANDRAIL SIZES (to match Fittings) 2 1/4 2 5/8 2 5/8 2 3/4 2 5/8 2 3/8 2 3/8 2 3/8 2 3/4 2 3/8 www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 43
S T A I R C O M P O N E N T S FITTINGS (continued) (see sizes pg 43) 60 0 Over 90 0 Up 60 0 Starting Easing Easing Easing w/return end 7013 7014 7015 WOOD OS OS OS 7213 7214 N/A WOOD OS OS --- 7513 7514 7515 WOOD OS / WO / MH / BC OS / WO / MH / BC OS 7713 7714 N/A WOOD OS / MH OS / MH --- 7913 7914 7915 WOOD OS OS OS OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry (see sizes pg 43) 60 0 Over Easing Opening Tandem 1/4 Turn w/cap S Fitting w/return end Cap Cap 60 0 135 0 no cap 7016 7019 7020 7021 7021-135 7047-LH/RH --- 7019-LC 7020-LC 7021-LC --- --- N/A 7219 7220 7221 7221-135 N/A WOOD --- OS OS OS OS --- N/A 7519 7520 7521 7521-135 N/A WOOD --- OS / WO / MH / BC OS / WO / MH / BC OS / WO / MH / BC OS --- N/A 7719 7720 7721 7721-135 N/A WOOD --- OS / MH OS / MH OS / MH OS --- N/A 7919 7920 7921 7921-135 N/A WOOD --- OS OS OS OS --- LC = Large Cap Fittings OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry All Regency Stair Parts fittings are shipped with 1 taper plugs, rail bolts, templates and instructions to assist in installation. 44 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
(see sizes pg 43) 90 0 Turn No Cap 90 0 Turn w/cap 135 0 Turn No Cap HANDING Left Right Left Right Left Right 7050 7055 7060 7065 7060-135 7065-135 --- --- 7060-LC 7065-LC --- --- N/A N/A 7260 7265 N/A N/A WOOD --- --- OS OS --- --- N/A N/A 7560 7565 N/A N/A WOOD --- --- OS / WO / MH / BC OS / WO / MH / BC --- --- N/A N/A 7760 7765 N/A N/A WOOD --- --- OS / MH OS / MH --- --- N/A N/A 7960 7965 N/A N/A WOOD --- --- OS OS --- --- LC = Large Cap Fittings OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry (see sizes pg 43) 90 0 Turn w/cap Straight w/tandem Cap HANDING Left Left Right Right RISE 1-Rise 2-Rise 7080 7081 7085 7086 7088 7089 --- 7081-LC --- 7086-LC --- 7089-LC N/A 7281 N/A 7286 N/A 7289 WOOD --- OS --- OS --- OS N/A 7581 N/A 7586 N/A 7589 OS / WO OS / WO OS / WO WOOD --- --- --- MH / BC MH / BC MH / BC N/A 7781 N/A 7786 N/A 7789 WOOD --- OS / MH --- OS / MH --- OS / MH Up Easings are attached on all 1-Rise Goosenecks Up Easings are loose on all 2-Rise Goosenecks N/A 7981 N/A 7986 N/A 7989 WOOD --- OS --- OS --- OS LC = Large Cap Fittings OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 45
S T A I R C O M P O N E N T S FITTINGS (continued) (see sizes pg 43) 90 0 Turn No Cap 2-Rise w/cap Straight No Cap HANDING Left Left Right Right RISE 1-Rise 2-Rise 1-Rise 2-Rise 1-Rise 2-Rise 7070 7071 7075 7076 7097 7098 7099 OS N/A 7271 N/A 7276 7297 N/A 7299 WOOD --- OS --- OS OS --- OS N/A 7571 N/A 7576 N/A N/A 7599 WOOD --- OS / WO OS / WO OS / WO --- --- --- MH / BC MH / BC MH / BC N/A 7771 N/A 7776 N/A N/A 7799 WOOD --- OS / MH --- OS / MH --- --- OS / MH N/A 7971 N/A 7976 N/A N/A 7999 WOOD --- OS --- OS --- --- OS OS = Oak WO = White Oak MH = Mahogany BC = Brazilian Cherry Up Easings are attached on all 1-Rise Goosenecks Up Easings are loose on all 2-Rise Goosenecks ADA & NFPA COMMERCIAL CODE COMPLIANT WALL RAILS AND FITTINGS 6041 1 1/2 x 1 1/2 90 0 Level 60 0 Up 60 0 Over Round Quarter Turn Easing Easing Rail 7023 7024 7025 6041 WOOD OS OS OS OS 6040 1 3/4 x 1 9/16 90 0 Level 60 0 Up 60 0 Over Flat Bottom Quarter Turn Easing Easing Rail 7123 7124 7125 6040 WOOD PS PS PS PS OS = Oak PS = Poplar 46 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
HANDRAILS Handrails are the backbone to your stairway, providing continuity and structure to the final design. Regency Stair Parts offers both solid and engineered handrails. Aesthetically pleasing engineered handrails display beautiful face grain around the circumference of the profile with excellent color to highlight the best of your chosen wood species. Each handrail has a matching bending rail to shape around balconies and stairs. Handrail Handrail Handrail Handrail Handrail (2 1/4 x 2 3/8) (2 5/8 x 2 3/8) (2 5/8 x 2 3/8) (2 3/4 x 2 3/4) (2 5/8 x 2 3/8) WOOD OS OS BC / MH / OS / WO OS OS TYPE ENG / FJ / ST / AS FJ / ST / AS ST / AS ST / AS FJ / ST / AS Bending Rail Bending Rail Bending Rail Bending Rail Bending Rail (2 1/4 x 2 3/8) (2 5/8 x 2 3/8) (2 5/8 x 2 3/8) (2 3/4 x 2 3/4) (2 5/8 x 2 3/8) -BR -BR -BR -BR -BR WOOD OS OS BC / MH / OS / WO OS / MH OS Bending Mould Bending Mould Bending Mould Bending Mould Bending Mould (2 1/4 x 2 3/8) (2 5/8 x 2 3/8) (2 5/8 x 2 3/8) (2 3/4 x 2 3/4) (2 5/8 x 2 3/8) Bending Mould Bending Mould Bending Mould Bending Mould Bending Mould WOOD PS PS PS PS PS ADA Wall Rail Wall Rail Fillet & Shoe Track Fillet & Shoe Track (1 1/2 x 1 1/2) (1 3/4 x 1 9/16) (1 1/4 width) (3/4 x 2 3/4) (1 3/4 width) (1 x 3 3/16) 6041 6040 6050 6045 6007 6006 WOOD OS PS OS / PS OS / PS OS / PS PS TYPE AS FJ AS FJ AS FJ ENG = Engineered FJ = Fingerjointed ST = Solid Top AS = All Solid BC = Brazilian Cherry MH = Mahogany OS = Oak PS = Poplar WO = White Oak www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 47
S T A I R C O M P O N E N T S TREADS & STARTING STEPS Treads and starting steps create the foundation for your stairway. No other component receives as much wear and tear. Regency Stair Parts treads are engineered and built with this in mind to give you the performance required to last a lifetime. Shown at right: Staircase featuring 5015 balusters (pg 15), 4063 newels (pg 13), premium red oak treads (pg 48) and railing (pg 47). ENGINEERED TREADS - Red Oak / Veneer Two Sides Plain Tread Reversible-Returned One End 1 1/32 x 10 1/4 x 36 8510-R-36 --- --- 1 1/32 x 10 1/4 x 42 8510-R-42 1 1/32 x 10 1/4 x 42 8503-R-42 1 1/32 x 10 1/4 x 48 8510-R-48 1 1/32 x 10 1/4 x 48 8503-R-48 1 1/32 x 10 1/4 x 54 8510-R-54 1 1/32 x 10 1/4 x 54 8503-R-54 1 1/32 x 10 1/4 x 60 8510-R-60 1 1/32 x 10 1/4 x 60 8503-R-60 1 1/32 x 10 1/4 x 72 8510-R-72 --- --- 1 1/32 x 10 1/4 x 84 8510-R-84 --- --- 1 1/32 x 10 1/4 x 92 8510-R-92 --- --- 1 1/32 x 11 1/2 x 36 8530-R-36 --- --- 1 1/32 x 11 1/2 x 39 8530-R-39 --- --- 1 1/32 x 11 1/2 x 42 8530-R-42 1 1/32 x 11 1/2 x 42 8523-R-42 1 1/32 x 11 1/2 x 45 8530-R-45 1 1/32 x 11 1/2 x 45 8523-R-45 1 1/32 x 11 1/2 x 48 8530-R-48 1 1/32 x 11 1/2 x 48 8523-R-48 1 1/32 x 11 1/2 x 54 8530-R-54 1 1/32 x 11 1/2 x 54 8523-R-54 1 1/32 x 11 1/2 x 60 8530-R-60 1 1/32 x 11 1/2 x 60 8523-R-60 1 1/32 x 11 1/2 x 72 8530-R-72 1 1/32 x 11 1/2 x 72 8523-R-72 1 1/32 x 12 1/2 x 48 85AOR-48 --- --- Reversible-Double Return select or better grade of Northern Red Oak sandable face-glued veneers both sides excellent grain and color match moisture protection with applied wax to end grain 1 1/32 x 1 1/4 Red Oak nose 1 1/32 x 1 1/4 x 13 radius cut solid miter return All-solid (AS) treads also available --- --- 1 1/32 x 11 1/2 x 48 8532-R-48 --- --- 1 1/32 x 11 1/2 x 54 8532-R-54 48 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
PREMIUM SOLID TREADS Brazilian Cherry / Mahogany / White Oak Size Plain Tread Reversible-Returned One End 1 1/16 x 11 1/2 x 48 8430MWC-48 8433MWC-48 1 1/16 x 11 1/2 x 60 8430MWC-60 8433MWC-60 1 1/16 x 11 1/2 x 72 8430MWC-72 8433MWC-72 PREMIUM SOLID PIE TREADS Red Oak Size Plain Tread Reversible-Returned One End 1 1/32 x 26 1/2 x 48 8440R-48 --- 1 1/32 x 26 1/2 x 54 8440R-54 --- 1 1/32 x 26 1/2 x 60 8440R-60 --- HYBRID TREADS Reversible Oak / Poplar - Returned One End Oak on Oak on Both Size Return End Only Return and Plain Ends 1 1/32 x 10 1/4 x 42 8601-H-42 --- 1 1/32 x 10 1/4 x 48 8601-H-48 --- 1 1/32 x 10 1/4 x 54 8601-H-54 --- 1 1/32 x 10 1/4 x 60 8601-H-60 --- Pie Treads Pie treads are designed for spiral or winder stairs and can be flipped over to make two treads thus increasing yield and reducing waste. Apply loose miter returns to short side of tread for open stairs. Hybrid Treads Hybrid treads are a cost-effective alternative to using regular oak treads on carpeted staircases with oak returns. Oak is used in all exposed areas of a hybrid tread, while a lower-cost hardwood is applied in the areas that will be covered by carpet. Choose from single and double return hybrids. 1 1/32 x 11 1/4 x 48 8621-H-48 --- 1 1/32 x 11 1/4 x 60 8621-H-60 --- 1 1/32 x 11 1/2 x 42 8631-H-42 --- 1 1/32 x 11 1/2 x 48 8631-H-48 8632-H-48 1 1/32 x 11 1/2 x 54 8631-H-54 8632-H-48 1 1/32 x 11 1/2 x 60 8631-H-60 8632-H-48 Solid Treads Premium grade, and dried to 6% to 8% moisture content, solid treads also feature 3 to 5 edge-glued staves per tread. A full end radius of 1/2 on nose and return, radius cut miter returns and reversible miter return treads are also featured. SOLID PINE STAIR TREADS Size APG CLEAR PRIMED Pine Stair Treads & Pine treads and risers are available in three styles: Risers 1 1/32 x 10 1/2 x 36 8401E-36 --- --- 1 1/32 x 10 1/2 x 42 8401E-42 --- --- 1 1/32 x 10 1/2 x 48 8401E-48 --- --- 1 1/32 x 11 1/2 x 36 8430E-36 --- --- 1 1/32 x 11 1/2 x 42 8430E-42 --- --- APG: Appearance Grade 3 to 5 solid staves per tread Small tight knots only No cracked, open or dead knots allowed CS: Clear Stain Grade 3 to 5 solid staves per tread Tight pin knots only and small open defects and pith allowed on bottom side Clear one face PRIMED: Primed Primed on four sides Fingerjointed and edge-glued 1 1/32 x 11 1/2 x 48 8430E-48 --- --- 1 1/32 x 12 1/2 x 48 --- 84AOE --- PINE RISERS Size APG CLEAR PRIMED 11/16 x 8 1/2 x 36 81IOE-36 --- --- 11/16 x 8 1/2 x 42 81IOE-42 --- --- 11/16 x 8 1/2 x 48 81IOE-48 --- --- Glue Block Ready Risers (GBR) There is no primer in the area where the glue block is to be applied. This allows better adhesion with wood-to-wood contact. STRINGERS Size APG CLEAR PRIMED (LVL) 1 x 9 1/4 x 192 --- --- 88KOE-192 2 PRIMED RISERS (GBR) Size APG CLEAR PRIMED (LVL) 3/4 x 8 1/2 x 48 --- 81IOE-48 81IOX-48 3/4 x 8 1/2 x 192 --- --- 81IOX-192 3/4 www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 49
S T A I R C O M P O N E N T S TREADS & STARTING STEPS (continued) 48, 54, 60 (top view) Size* Red Oak Starting Tread - Single Tread Only - Reversible 1 1/32 x 11 1/4 x 58 3/8 8010-48 1 1/32 x 11 1/4 x 64 3/8 8010-54 1 1/32 x 11 1/4 x 70 3/8 8010-60 48, 51, 54 (top view) Size* Red Oak Starting Tread - Double Tread Only 1 1/32 x 11 1/4 x 68 3/4 8015-48 1 1/32 x 11 1/4 x 71 3/4 8015-51 1 1/32 x 11 1/4 x 74 3/4 8015-54 60 (top view) Size Reversible Assembled Riser Only 3/4 x 6 1/2 x 60 8010R-6 1/2 3/4 x 6 3/4 x 60 8010R-6 3/4 3/4 x 7 x 60 8010R-7 3/4 x 7 1/4 x 60 8010R-7 1/4 Available as: Oak / Primed 66 1/4, 69 1/4, 72 1/4 (top view) Size Bull Nose - Double End Unassembled Riser Only Available as: Oak / Primed 3/4 x 8 x 66 1/4 8015R-66 1/4 3/4 x 8 x 69 1/4 8015R-69 1/4 3/4 x 8 x 72 1/4 8015R-72 1/4 1 1/32 (side view) 3 1/2, 5 1/4 3 1/2 5 1/4 Size Landing Tread Landing Tread 1 1/32 x 3 1/2 x 16 6LTOR-3 1/2 --- 1 1/32 x 5 1/4 x 16 --- 6LTOR-5 1/4 Available as: Available as: Oak Brazilian Cherry / Mahogany / Oak / White Oak Starting Steps The combination of an oak tread and oak or primed riser used in the first step of the stairway. Treads and risers are sold separately to allow you to mix and match finishes. All risers are available in four different height elevations to eliminate field trimming. *Overall component dimension given 50 Regency Stair Parts 1050 Northbrook Pkwy Suwanee GA 30024
ACCESSORIES Item Size Dowel Screw 1/4 x 2 Dowel Screw 5/16 x 2 1/2 Dowel Screw 3/8 x 4 2 1/2 Item Wall Rail Bracket -Basement Stair (2 1/2 depth) FINISHES 702-B-MD Brass Plated Flat Black Brushed Nickel Dowel Driver Bit 1/4 Dowel Driver Bit 5/16 Dowel Driver Bit 3/8 Rail Bolt Kit 5/16 x 3 1/2 (includes nut, washer and oak plug) 2 3/4 2 5/8 Wall Rail Bracket -Main Stair (2 3/4 depth) FINISHES 601-B-MD Brass Plated Brushed Nickel Satin Black Silver Vein Oil Rubbed Copper Wrought Iron Wall Rail Bracket - Commercial Stair (2 5/8 depth) FINISH 603-B-MD Brass Plated Flat Black Brushed Nickel EZ Pin 1/4 Ø x 3/4 Ø x 1 3/4 Cove Mould (5/8 x 3/4) WOOD WOOD CMP6250 PS CMO6250 OS Round Rosette (4 x 4) 7017 WOOD OS Scroll Bracket (8 1/4 x 12 1/4) WOOD 8029REV OS / PS Oval Rosette (4 x 5 1/2) 7037 WOOD OS Plain Bracket (8 1/4 x 12 1/4) WOOD 8028REV OS / PS OS = Oak PS = Poplar www.regencystairparts.com (phone) 678-455-5188 (fax) 678-455-5190 51