1
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit System Overview System Time System Date BIOS Version Processor Type Processor Speed Microcode Update : 40F32/62 L1 Cache Size : 256KB L2 Cache Size : 2048KB Total Memory DDRII_1 DDRII_2 [ 17:00:09] [Fri 02/12/2010] : N68C-GS UCC P1.00 : AMD Athlon (tm) 64 X2 Dual Core Processor 4000+ (64bit) : 2000MHz : 1024MB with 128MB shared memory Single-Channel Memory Mode : 1024MB/266MHz DDR2_533 :None Use [Enter], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time. +- Change Field Tab Select Field v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit System Overview System Time System Date BIOS Version Processor Type Processor Speed Microcode Update : 40F32/62 L1 Cache Size : 256KB L2 Cache Size : 2048KB Total Memory DDRII_1 DDRII_2 [ 17:00:09] [Fri 02/12/2010] : N68C-S UCC P1.00 : AMD Athlon (tm) 64 X2 Dual Core Processor 4000+ (64bit) : 2000MHz : 1024MB with 128MB shared memory Single-Channel Memory Mode : 1024MB/266MHz DDR2_533 :None Use [Enter], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time. +- Change Field Tab Select Field v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 2
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit EZ Overclocking Load Optimized CPU OC Setting CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Boot Failure Guard CPU/LDT Spread Spectrum PCIE Spread Spectrum SATA Spread Spectrum Processor Maximum Frequency Processor Maximum Voltage Multiplier/Voltage Change HT Bus Speed HT Bus Width [Press Enter] [200] [100] x10.5 2100 MHZ 1.2500 V Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Enter Go to Sub Screen v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 3
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit EZ Overclocking Load Optimized CPU OC Setting CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Boot Failure Guard CPU/LDT Spread Spectrum PCIE Spread Spectrum SATA Spread Spectrum Processor Maximum Frequency Processor Maximum Voltage Multiplier/Voltage Change Processor Multiplier Processor Voltage [Press Enter] [200] [100] x10.5 2100 MHZ 1.2500 V [Manual] [x10.5 2100 MHz] [1.2500 V] Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Enter Go to Sub Screen v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 4
5
OC Tweaker Memory Timing Memory Controller Mode Power Down Enable Bank Interleaving Channel Interleaving CAS Latency (CL) TRCD TRP TRAS TRTP TRRD TWTR TWR TRC TRWTWB TRWTTO TWRRD TWRWR 4 4 4 12 2 2 2 4 16 0 4 0 2 BIOS SETUP UTILITY [Unganged] [Hash 1] +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 6
7
8
9
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Advanced Settings Options for CPU WARNING : Setting wrong values in below sections may cause system to malfunction. CPU Configuration Chipset Configuration ACPI Configuration Storage Configuration PCIPnP Configuration Floppy Configuration SuperIO Configuration USB Configuration BIOS Update Utility ASRock Instant Flash Enter Go to Sub Screen v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 10
Advanced CPU Configuration AM2 Boost Cool'n'Quiet Secure Virtual Machine BIOS SETUP UTILITY [Disabled] Enabled Disabled Options +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 11
Chipset Settings Advanced Onboard LAN Onboard HD Audio Front Panel Share Memory Primary Graphics Adapter CPU Thermal Throttle BIOS SETUP UTILITY [PCI] Auto/Enable/Disable Onboard HD Audio. + - Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 12
Advanced BIOS SETUP UTILITY ACPI Settings Suspend To RAM Check Ready Bit Away Mode Support Restore on AC / Power Loss Ring-In Power On PCI Devices Power On PS / 2 Keyboard Power On RTC Alarm Power On ACPI HPET Table OSC Control [Disabled] [Power Off] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Select auto-detect or disable the STR feature. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 13
14
Advanced Storage Configuration Onboard IDE Controller Onboard SATA Controller SATA Operation Mode IDE1 Master IDE1 Slave SATAII_1 SATAII_2 SATAII_3 SATAII_4 BIOS SETUP UTILITY [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Options Disabled Enabled +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 15
Advanced BIOS SETUP UTILITY IDE Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. :Hard Disk :MAXTOR 6L080J4 :80.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-6 :Supported Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer [Disabled] [Disabled] Select the type of device connected to the system. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 16
Advanced BIOS SETUP UTILITY Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [32] ValueinunitsofPCI clocks for PCI device latency timer register. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 17
Advanced BIOS SETUP UTILITY Floppy Configuration 1 Floppy A [1.44 MB 3 2 "] Select the type of floppy drive connected to the system. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced BIOS SETUP UTILITY Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Parallel Port Address Parallel Port Mode EPP Version ECP Mode DMA Channel Parallel Port IRQ [3F8 / IRQ4] [378] [ECP + EPP] [1.9] [DMA3] [IRQ7] Allow BIOS to Enable or Disable Floppy Controller. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 18
19
Advanced BIOS SETUP UTILITY USB Configuration USB Controller USB 2.0 Support Legacy USB Support To enable or disable the onboard USB controllers. +- Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 20
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature M / B Temperature : 37C/98F : 27C/80F Enable/Disable CPU Quiet Fan Function. CPU Fan Speed Chassis Fan Speed Power Fan Speed : 4722 RPM : N /A : N /A Vcore + 3.30V + 5.00V + 12.00V CPU Quiet Fan : 1.216V : 3.248V : 5.136V : 12.091V [Disabled] F1 F9 F10 ESC General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 21
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Boot Settings Boot Settings Configuration Configure Settings during System Boot. 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device Hard Disk Drives Removable Drives CD/DVD Drives [1st Floppy Device] [HDD: PM - HDS722580VL] [CD/DVD: 3S-CD-ROM C] [USB] Enter Go to Sub Screen v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. BIOS SETUP UTILITY Boot Boot Settings Configuration Full Screen Logo AddOn ROM Display Boot Logo Boot From Onboard LAN Bootup Num-Lock [Disabled] [On] Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead of POST messages. + - Change Option v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. 22
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Install or Change the password. Enter Change v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 23
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes Load BIOS Defaults Load Performance Setup Default (IDE/SATA) Load Performance Setup RAID Mode Load Power Saving Setup Default Exit system setup after saving the changes. F10keycanbeused for this operation. Enter Go to Sub Screen v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 24