Features & Benefits LIGHT STRIP High Output L80 Epistar SMD light source. Eco friendly UV resistant PVC materials. Max,000Lm/Meter with uniform light output. Solder free system for quick installations. Minimum bending radius of cm/.8 Anodized Aluminum Mounting hardware for tough applications. oz Copper PCB for better thermal management. Suitable For Commercial Display Cabinet Window Frame Signboard Advertising Board Illumination Architectural Corridors Terrace Ground Slots Aquarium ighting Version E7880 For more information please contact toll free:.888.80.neon (666) www.glls.com /contact-us/
STRIP Technical Specifications Dimensions Output LED Light Running Length 6mm x.mm /.in x.6in RGB L80 Epistar SMD LED Chip Single feed: m / 9. feet Double feed: 0 m / 98. feet Light Surface Square Profile 0 Lumen Maintenance 70,000 Hours L70 @ C : 90,000 L0 @ 0,000 Hours L70 @ 0 : 70,000 Hours L0 @ 0 C Electrical Input Voltage V DC Power Consumption watts per meter /.66 watts per foot LED Count Physical Materials LED Spacing Cutting Length Package Size: Weight/Meter: Thermal Management Fixture Connections Bend Tolerances Maximum Diameter (medial bending only) Temperature Ranges Installation Operating Dependability Warranty Safety Certification IP Rated 60 per meter Polyvinyl Chloride (PVC) 6.67 mm /.66 inches 00 mm /.9 inches (6 LEDs) 9 grams /. pounds Cool to the Touch, Free Air Convection Front & End Leader Cables 0 millimeters /.97 inches - to 60 Celsius / - to 0 Fahrenheit - to 60 Celsius / - to 0 Fahrenheit & years Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title Requirements, Lighting Facts. Exceeds ANSI C78.77A, CE & RoHS Compliant. IP67 / IP0 Photometric Data available upon request or at Colors Available Color CCT Wave Length Red 60-60 Nanometer Green 0-0 Nanometer Blue 6-7 Nanometer Lumen Count Color Per Meter Per Foot Power Red >7lm >.86lm - Green >8lm >6.9lm - Blue >0lm >.9lm - R+G+B (white) >00lm >9.lm W/m.66W/ft Light Dimensions Tolerance of the light is ±0.mm. Vertical Bending Only Bend light perpendicular to the direction of the circuit board. Colors PVC Clear Transparent PVC Ivory White PVC Black
0 D:cm IP 67 Year Year LIGHT STRIP Minimum Bend Diameter The light can only be bent along the light surface. Do not bend smaller than allowed minimum bend diameter. Photometric Data LED Type SMD Beam angle 0 Color Wavelength Lumen/m Power/m Red 60-60nm >7lm / Green 0-0nm >8lm / Blue 6-7nm >0lm / R+G+B White >00lm W
Injection-moulded End Fittings LIGHT STRIP Ideal for a seamless look on long runs. Please Note: days - weeks lead time plus shipping. Front Exit Cable Connects light to power supply with pre-installed front cable, IP6. The following cable lengths are available. (For longer lengths please contact us) Length m /. m / 9.8 FL-6X-IP6-FA-PFE-m FL-6X-IP6-FA-PFE-m End Cap Pre-installed termination protection of the light, IP6. FL-6X-FA-EC Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP0. The following cable lengths are available. (For longer lengths please contact us) Length m /. m / 9.8 FL-6X-IP6-CL-PFE-m FL-6X-IP6-CL-PFE-m Feed connector(four-pin), PC cover, Anti-skidding clip, Heat-shrink tube End Cap Termination protection of the light. IP0. Tail plug Shading sheet Heat-shrink tube FL-6x-CL-EC Jumper Connects two pieces of light together with a flexible cable. IP0 connector. Lengths Available m /. m / 9.8 FL-6x-IP0-Jm FL-6x-IP0-Jm Double-end feed connector(four-pin) PC cover Anti-skidding clip Heat-shrink tube
STRIP Fittings (Continued) Seamless Splice Connects two pieces of light together seamlessly. Double-end feed connector(four-pin) PC cover Anti-skidding clip Heat-shrink tube FL-6x-IP0-SPL Please Note: Indoor only. Power T-Feed Connects two pieces of light together with a T joint, powered from the middle. IP0 connector. Lengths Available (L & L) 0.m / 0.98 FL-6x-IP0-T T joint(four-pin), PC cover Anti-skidding clip, Heat-shrink tube Snap Connector Front Exit Cable Connects light to power supply with pre-installed front cable, IP67. The following cable lengths are available. (For longer lengths please contact us) Length m /. m / 9.8 FL-6x-IP67-SC-m FL-6x-IP67-SC-m Snap End Cap Pre-installed termination protection of the light, IP67. FL-6x-IP67-SC-EC
Mounting Channel Aluminum Mounting Channel LIGHT STRIP 00 mm /.8 inch FL-6x-AMC-0 0 mm /.96 inch 00 mm / 7.87 inch Φ. mm /. inch PVC LED 000 mm / 9.7 inch FL-6x-AMC-m 00 mm /.9 inch 00 mm / 7.87 inch Φ. mm /. inch PVC LED Plastic Mounting Channel 00 mm /.8 inch FL-6x-PMC-0 0 mm /.96 inch 00 mm / 7.87 inch Φ. mm /. inch PVC LED 000 mm / 9.7 inch FL-6x-PMC-m 00 mm /.9 inch 00 mm / 7.87 inch Φ. mm /. inch PVC LED Clip FL-6x-Clip
STRIP Testing & Certificate Third-Party Test Report Certificate
STRIP Reliability of Light
STRIP Charts Characteristics
Charts Power Supply Configuration Table The maximum length of light for different power supply ratings. LIGHT STRIP Product Standard Length (m) 8W/8% W/8% 60W/89% 7W/89% 80W/90.% 00W/9% 0W/9% 0W/9% 8W/9.% 0W/9% 0W/9% 6 8 9 9 6 6 8 0 7 9 7 6 0 0 Note:. Indicates the power supply is over loaded. 0M/.8Ft must have power cable installed on both ends of the strip.. Example: 8W/8% - 8W is the rated power and 8% is the power efficiency. Wavelength of Color Light
STRIP Project Details Project Name: Notes: Warehouse Locations United States 60 W. Desert Inn Rd. Las Vegas, NV 896 Canada 6 Botsford Street, Unit #0 Moncton, NB EC X7 WWW.GLLS.COM For more information please contact toll free:.888.80.neon (666) www.glls.com /contact-us/