SCS Concept Group Choose the FREEDOM Samuel Knorst, 01.01.2016 Edition 1
HISTORY SCS Concept sarl was founded in France in 2005, as a distribution company in the industrial sector. In early 2007 SCS became distributor for Europe of M.Shimizu, a Brazilian company, for a torque wrench-pda system with wireless communication. Following the interest of the market, combined with the different needs of European customers, SCS Concept decided to develop the first electronic Torque/Angle wrench; as a consequence of this decision, SCS opened a R&D department in Italy (SCS Concept Italia Srl). In 2007 SCS started a partnership with the Germany company Q- Direct GmbH & Co.KG. Q-direct obtained the DKD accreditation (today DAkkS) according to DIN EN ISO/IEC 17025:2005 for a series of mobile laboratories for measure torque. One of these laboratories was installed at SCS. The flexibility and the important investments in research allowed SCS to develop in a short time a range of innovative products for measurement and control in tightening processes. Since 2009, SCS Concept has become the supplier of electronic Torque/Angle wrenches for quality control and production, data collectors, test benches and software of the major automotive manufacturers worldwide. 2
The «SCS» Familly SCS Concept Group srl SCS Concept France SCS Concept Italia SCS Concept America Sales E-commerce After sales service Calibration laboratory Egineering Production Sales After sales service Calibration Laboratory Sales After sales service Calibration laboratory Q-Direct DMG Torino SCS Latin America Sales After sales service Calibration laboratory Sales After sales service Automation systems Sales After sales service Calibration laboratory 3
Our Customers Ducati Lamborghini BMW Audi Volkswagen Daimler Fiat Peugeot Citroen Ferrari Maserati DAF Trucks Ford Seat Renault Faurecia Thyssenkrupp Stelia Airbus UTC Goodrich Aerospace General Motors Bosch Siemens Honda Nissan FPT Power Train Renault Trucks Renault Trucks Défense MTU Alstom Scania Caterpilar MGI Coutier Tesla Class Continental SAS Automotive CNH Safran 4
Our Products 5
Wrenches for Quality control and Production Freedom 3 Wrench (LAB-SPC-PRW) Freedom EWW3 & Wrench FWELP with cable (Only PRW) Can be used in 3 different modes : Lab mode SPC mode PRW mode Range : 1.5 Nm until 1200 Nm Memory 1 GB 20000 measures, 20000 curves Touchscreen 2.3 8 hours autonomy with LI-Ion battery Interchangeable battery thanks to External battery charger Battery cradles for production Communication via USB, Bluetooth, wifi, radio 868 Automatic tool recognition Barecode reader integrated Display protection Main functions : All tightening strategies Tightening alnalysis All SPC functions Can be used in 1 mode : PRW mode Range : 1.5 Nm until 1200 Nm Memory 1 GB 20000 measures, 20000 curves Touchscreen 2.3 Always connected to power supply Communication via USB, Bluetooth, wifi, radio 868 Automatic tool recognition Main functions : All tightening strategies 6
Wrenches for Quality control and Production Easy Wrench Characteristics: Measurement of torque and angle in either continuous or peak modes Breakaway Torque CW & CCW reading Torque tightening or Torque+Angle tightening with torque window Selectable units of measurement Nm, lb\in, lb\ft,kgm Memory: Internal memory of 900 results Power supply: 4xAA standard rechargeable batteries for 40 hours continuous operation without backlighting Functions: Calendar\clock Auto power off Three alarm LED: red, yellow and green + buzzer RS232 communication to your PC 7
Click Wrenches & Accessories Wrenches for Quality control and Production Graduated click wrenches 1-1000 Nm Graduated click wrenches with integrated ratchet 1-340 Nm Interchangeable preset click wrenches 1-420 Nm Screen torque click wrenches Torque multipliers : 1-340 Nm 1-10 000 Nm 8
Data Collectors Datatouch Accessories Easytouch Can be used in 2 different modes : Lab mode SPC mode Can be connected with cable transducers or wireless transducers and wrenches via cable Touchscreen 8 hours autonomy with LI-Ion battery Interchangeable battery thanks to External battery charger Communication via USB, Bluetooth, Automatic device recognition Barecode reader integrated Main functions : All tightening strategies in Lab mode Tightening alnalysis All SPC functions Can be used only in 1 mode : Lab mode Communicate only with Freedom3 Explorer Can be connected with cable transducers or wireless transducers and wrenches via cable Touchscreen 8 hours autonomy with LI-Ion battery Direct battery charger Communication via USB Main functions : All tightening strategies in Lab mode Tightening alnalysis All SPC functions in Lab mode 9
DEVICES FOR DATA COLLECTORS Rotary Transducers Static Transducers Wrenches Rotary transducers : With cable or without cable via Bluetooth Range : 0.5 5000 Nm Acuracy : 0.5% from 20%-100% of the Max capacity of the transducer Automatic device recognition Static transducers transducers : With cable or without cable via Bluetooth Range : 0.2 2500 Nm Acuracy : 0.5% from 20%- 100% of the Max capacity of the transducer Automatic device recognition Wrenches : With cable Range : 1.5 1200 Nm Acuracy : 0.5% from 20%- 100% of the Max capacity of the transducer Automatic device recognition 10
BENCHES FOR QUALITY FTY : Dynamic Bench with Brakes Microbench : Static Bench MSB : Static Bench Dry hydraulic brakes Range : 0.2 1000 Nm Very fast (no precalibration needed) Torque & angle tests Special Tests :Reproduce the curve of the joint Freedom AV for Wrenches Motorization of the bench Tilting System for test H/V Brakes on Swing arm Connect to ext Transducers (wire or wireless) Easy maintenance (brakes plug & play) Static transducers and joint simulator Range : 0.2 250 Nm Torque tests Special Joint simulator stiffness on request Freedom AV for Wrenches Connect to ext Transducers (wire or wireless) Esay to move : 40x60 cm & 80 kg Static transducers and joint simulator Range : 0.2 2500 Nm Torque tests Special Joint simulator stiffness on request Freedom AV for Wrenches Motorization of the bench Tilting System for test H/V Connect to ext Transducers (wire or wireless) Fully customizable with range that you need FTA : T/A WRENCH TESTER MTC : Multi Channel Acquisition AWT : Automatic Wrench Tester Range : 300, 600 or 1000 Nm Test of Torque & angle wrenches Test of wrench with extension Test according to VDI/VDE 2645 part 2, VDI/VDE 2647 To be used with rotary transducers Range : 8 channels Torque or Torque & Angle tests Tilting System for test H/V Connect to ext Transducers (wire or wireless) Static transducers and joint simulator Range : 0.2 2500 Nm Torque tests Special Joint simulator stiffness on request Freedom AV for Wrenches Motorization of the bench Tilting System for test H/V Connect to ext Transducers (wire or wireless) Fully customizable with range that you need 11
HIGH TORQUE INSTRUMENTS AND SOLUTIONS FOT HIGH TORQUE TEST Our SCS transducers can be used to determinate the minimum torque to open and close the valve. DataTouch3 is connected to the transducer and displays the max torque and the rotation of the stem (angle). DataTouch3 allows to analyze the Torque\Time and Torque\Angle curves in the phases of opening and closing of valves. Thanks to SCS F3 Lab explorer software, it is possible to send curves and results to a pc. 12
SOFTWARES Freedom 3 Lab Explorer Software Freedom 3 Lab Explorer is a SCS software able to download data,results and curves from the main SCS products (see the list above), edit reports, export data to Excel and display single or multi-curves graphs. 13
SOFTWARES Your Quality Process Manager Software designed to manage the quality control of a production line, the management of all the tools (supplier, models, technical specifications) and the related quality control tests (Cm\Cmk and X\R charts). For a better overview of the complete production process, SQnet+ allows the management of all operations, with the associated tools and of the process control (Residual torque). The system provides a complete situation of Torque & Angle tests on the tools, compared to the process control on the related joint. 14
SOFTWARES The above picture shows the working way of VPG+: Through a special synchronization mode the system is able to work even if the network is not always available. From one PC it is possible to configure the complete production line and to perform the synchronization of unlimited number of stations with a SINGLE CLICK. When the station receives the cycle start, selects and enables the tool to perform the sequence. After each tightening the tool sends back the results to the station. If the network is available the station will send immediately the result to the network database, If the network for any reason is not available, the station will keep locally the results until the network connection is restored. This guarantees no data lost and no production interruptions. Guide your production VPG+ is designed to assist operators during the assembly and rework processes. Operators are driven through the different tightening sequences by VPG+. The software selects automatically the correct tightening program and the associated tool for the operation, displays the necessary instructions for the operator and the picture of the operations with their status (to be tightened, OK and NOK). 15
Light Guide System In partnership with DMG Torino 16
CALIBRATION LABORATORY In partnership with Q-Direct Torque calibration : 0,1 2000 Nm Angle Calibration : Which Instrument can we calibrate: Test benches and systems for Nutrunners Test benches and systems for torque wrenches Digital torque wrenches Torque transducers static and dynamic Mechanical torque wrenches Which Instrument can we calibrate: Test benches and systems for Nutrunner with angle simulation Torque&Angle wrenches Torque&Angle rotary transducers As part of the development of measuring instruments, we can offer the first mobile accredited metrology laboratory in the world. SCS Concept has started a cooperation with German company Q-Direct GmbH & Co. KG, which has realized a series of mobile laboratories accredited DAkkS according to DIN EN ISO/IEC 17025:2005 for the magnitudes of torque and angle. The mobile laboratory allows the customer to eliminate the time of immobilization of the instruments and the costs of bureaucratic management that revolves around the certification. Even the elimination of shipping and packaging will lead to substantial savings. Of course you can also send the tools at our laboratory. Our mobility will make you save time and money. According to which procedures: DIN 51309 DKD-R 3-7 DKD-R 3-8 DIN ISO 6789 VDI/VDE 2646 EA 10-14 According which procedure: VDI/VDE 2648 Electric calibration of amplifiers 17
TOOLS SERVICE Repairs of measurment products and tightening products : Thanks to its experience in measurment and tightening products, SCS Concept is able to make the maintenance of many instruments or production tools in many brands like : Desoutter/Bosch/Makita/AMT/CooperTools/Stanley/Fein/IngersollRand When we receive the tools : We identify the product in our maintenance database, in order to be able in the future, the complete history of the maintenance we make on your products (an automatic email is sent to inform you that your product has been received in our service and the diagnostic will start) In cooperation with you, we create in the same time a complete technical documentation of the model if not yet existing in our database. We make some tests of the product, before dismounting it, taking into consideration the behavior of the product during the tests and all information given by you regarding the problem of this tool. We dismount the product, identify the problem and prepare if necessary a list of spare parts that have to be replaced on the tool. An offer is sent to you for the spare parts and time of work, giving you also explaination about the problem. When we receive your order, an automatic email inform you that the repair start. For production tools, we make a complete cm/cmk of the tool. When the tool is repaired, we send it back to you with a complete report of repair. An automatic email of shipment is also sent to you. Our target : Repair your production tools Respecting the right rules Within a reasonnable delivery time At the best price proposing you some improvments for less costs 18
Advanced Tightening Solutions for Quality Control & Production www.scsconcept.it www.scsconcept.fr www.scsconcept.de www.scsconcept.co.uk www.scsconcept.us www.scsconcept.es 19