PRUVEEO USER MANUAL 1
Warm Prompt We recommend that you carefully read this manual before using the dash cam, then read it again with the dash cam in your hands as this will help you to familiarize yourself with its many features. The dash cam is constantly improved over time, so the specification of the dash cam may change. Please note that each button has multiple functions so please be careful which Buttons you press in relation to each Mode / Function. There is no need to get frustrated because you should only do this once in order to set it up in the way that you require. 1. Please ensure that the dash cam is SWITCHED OFF when you either insert or remove a Micro TF Memory Card, in order to avoid damage. 2. Please ensure that the Micro TF Memory Card is inserted in the right way. If it is inserted backwards, it might damage the dash cam and TF Memory Card. 3. If you incorrectly insert the Micro TF Memory Card the dash cam will try and read it and set it as its default storage device, but will not be able to read it. 4. If the Micro TF Memory Card is not compatible with the dash cam, please DO NOT insert it again, as you will damage the TF Memory Card and the dash cam. Please buy the correct Micro TF Memory Card and then try again. 5. The dash cam supports the Micro SD card from 8GB to the highest 32GB, Class 10 only. 6. Adjust the position of the lens to ensure that you correctly record what you want. 2
7. We recommend a SanDisk Ultra Micro SDHC 32 GB Class 10 Memory Card for this dash cam. 8. In video recording mode, if you want to press Menu / Mode button, please stop recording videos first by pressing the REC button. 9. Please be careful and insert the TF Memory Card in the right way, do not force the Micro Memory Card in the slot as that is an indicator of the wrong way, insert it until the Micro TF Memory card clicks into place in the card slot. 10. Remove the Micro TF Memory Card. Please gently press down the Micro TF Memory Card, by approximately 1mm until you hear the Micro TF Memory Card click, it will then pop-up and can be removed. 11. Long press for 3 seconds the Power Button, then the screen lights up. The dash cam is switched ON. Long press 3 seconds Power Button, then the dash cam is switched OFF. 12. When being charged, the LCD screen will show the charging icon, and stop flashing when fully charged. 13. When using the built-in power, the dash cam will prompt low power and save the document then turn off automatically if the power is not enough. 14. We recommend using default factory settings, once the MENU has been set, then connect the car charger to the unit and put into the card. Once the car is started, the unit will automatically start recording. Once the car turns off, the unit will automatically stop recording. Please note that your vehicle s Cigarette Lighter Sockets do not have any power when the ignition is switched OFF. 3
15. All dash cam models must be continuously connected to either a 12 or 24 Volt power supply via a 5V 1A Charger because a LCD colour screen consumes a considerable amount of power. That is why mobile phone / dash cam screens automatically go blank when not being used - to save power. A fully charged battery will only power the screen for a few minutes. It must always be connected to a power supply via a 5V 1A Charger. 16. If you turn the option of SCREEN SAVER ON, in video recording mode, when the screen is switched Off, the dash cam is still recording. You can turn the screen on by pressing any button. 17. If you want to watch your videos on a PC, we recommend that you carefully remove the Micro TF Memory Card and insert it into a Card Reader either built into your computer or purchased separately. 18. After several weeks of daily recording it may be necessary for you to format your Micro TF Memory Card - if that is the case, please note that you will lose all of your files, so please back up a copy on your computer first in a unique dash cam Folder that you have created. 19. When your dash cam crashes / screen goes black, the phenomenon may be caused by improper operation, crash, please press the R = Reset button, hole by the top corner, gently with a cocktail stick. Just like you would do for a computer, printer, phone, etc. 20. Please format TF card in the device firstly if you use new TF card in the first time, then you can use. 21. Read/write life cycles of the most Micro SD card are considerably shorter at 3,000 to 5,000 cycles per cell. 4
Product Structure Specification 1. Power key 2. Menu / Mode key 3. OK key / Lock Video key / WIFI function key 4. REC video record key / Up key 5. MIC audio record key / Down key 6. REC led 7. Power led 8. WiFi Led 9. USB slot 10. Microphone 11. TF Card Slot 12. Reset key 5
ON / OFF Menu / Mode OK / Lock video / WIFI button Video record / Up Audio record / Down Reset key Long press to turn on and off. Short press to close/open the LCD back light while working. While in standby mode, short press this button to enter or EXIT setting menu Long press for mode key to switch between the camera / video playback function. Function 1: When recording, short press to lock the video. Function 2: In menu, short press to perform operations or to save the set value. Function 3: In standby or recording mode, long press to start WIFI function. Long press again to quit WIFI funtion. Function 4: In camera mode, short press the button to take a picture. Function 5: In playback mode, short press to start playing video, and press again to pause playback. In standby mode, short press to record video or to stop recording In Menu options, select upward function button. In standby or video recording, turn on or off the operation of sound recording and microphone In the menu options, select the downward function button. If dash cam stops working, long press the reset button to reset the dash cam. 6
Operating Instructions of Main Functions Emergency Lock When recording the video, press [OK / Lock video / WIFI button] key to start the emergency lock, and the current video clip is stored as a protected file. One-click Silent Mode When recording the video, if you do not want to record the sound, press [Down] key to start mute mode, then the recording mark on the top of the screen turns to the silent mark. Press again to turn the recording function. Video Record function In video mode, press the [REC] button to start recording, press the [REC] button again to stop recording. Tips: If this is the first time, please format the TF card. Dash cam only supports the FAT32 file system. Recording Functions Setting In standby mode, short press the [Menu / Mode] key to start the main menu of record setting, short press the [Menu / Mode] key to exit menu settings. Resolution: Set the video screen size, the higher the resolution is, the greater the video screen size will increase, so does the storage space it occupies, we recommend using 1280x720. 7
Loop Recording: OFF / 1 minute / 2 minutes / 3 minutes. Captured videos are stored in clips, when the memory card is full, the new videos will overwrite the previous recording, and keeps in such loop mode. Menu time refers to duration of each single clip, select OFF to avoid the cyclic recording, once the memory card is full a "Memory Card Full" warning will appear, and recording automatically stops. WDR (Wide Dynamic Range): ON / OFF. Exposure Compensation: You can adjust the value according to the intensity of light, to make up for video underexposed or overexposed. Video Audio: Select 'Open' to record synchronized sound when recording; select 'OFF' to record video in silent mode. Date Label: select 'Open' to add watermark of time while recording, so date and time will display on the playback video. Select 'OFF' to ignore the relevant information. 8
Using Wi-Fi and phone APP software download With the dash cam built-in Wi-Fi, you can use your smart device as a remote camera, viewfinder, and download files to your phone. Downloading the Wi-Fi App The Wi-Fi app is available to download for free at the Apple App Store and Google Play Store. Android users: Enter the Google Play Store, search for Goplus cam, download and install, following this user manual to connect the Wi-Fi and operate. iphone users: Enter the Apple App Store, search for Goplus cam, download and install, following this user manual to connect the Wi-Fi and operate. Pairing the camera to your device 1. Turn on the camera and press the Wi-Fi Button 2. The LCD will show the Wi-Fi SSIN and password 3. Search for a Wi-Fi hotspot on your smart phone/tablet, select the network and you will be prompted for a password; enter 12345678 to proceed 4. Once connected the camera s LCD will enter sleep mode 5. Open the Goplus cam application 9