Pro71600N3 NVR User Manual
User Information Admin User Name: Admin Password: IP Address: System Name: Table Of Contents 1. Menu Operation...4 1.1 Main Menu...4 2. Start & Shutdown System...5 2.1 Start Sub Menu...5 3. Preview...8 4. IP Channel Setting...9 4.1 Add IPC Automatically...9 4.2 Add IPC Manually...11 4.3 Channel Parameters Modification...12 4.4 Modify IPC Parameters...14 4.5 Delete IPC...15 5. System Configuration Setting...16 5.1 Device Setting...16 5.2 Channel Parameters Setting...17 5.2.1 Display Setting...18 5.2.2 Video Parameters...19 5.2.3 Schedule Record...21 5.2.3.1 Precise Video Backup...22 5.2.3.2 Record Time...23 5.2.3.3 Advanced Record...24 5.2.4 Motion Detection...25 5.2.5 Video Lost...28 5.2.6 Tampering Alarm...30 5.2.7 Video Mask Setting...33 5.3 Network...35 5.3.1 Network Setting...36 5.3.1.1 Advanced Setting...38 5.3.2 DDNS Setting...39 5.3.3 NTP Setting...40 5.3.4 Email Setting...41 5.3.5 Management Platform...42 5.4 Alarm & Exception...43 5.4.1 Alarm Input...44 5.4.2 Alarm Output...46 5.4.3 Exception...47 5.5 Account Setting...48 5.5.1 User Information Setting...49 5.5.2 User Online Checking...50 5.6 System Administration...51 5.6.1 Device Log...52 5.6.2 Stream Info...53 5.6.3 HDD Setting...54 5.6.4 System Update...55 5.6.5 Auto Reboot...56 5.6.6 Recovery Configuration...57 6. PTZ Control...58 7. Record...60 8. Manual Snapshot...60 9. Video Playback...61 10. Display Setting...63 11. Video Backup...64 12. Alarm Setting...65 13. File Manager...66 14. Image Setting...67 15. Screen Aspect Ratio/Segmentation...67
1. Menu Operation 1.1 Main Menu The Main Menu gives you access to all of the NVR s key functions. With your mouse, right click on the preview screen during a live view to pull up the Main Menu. 2. Start/Shutdown System 2.1 Start Sub Menu The Start Sub Menu displays when you hover over the Start button and allows you to Power Off, Reboot, Login, Logout, access the User Guide, set the Device Time and adjust Volume. Start Sub Menu Screen Power Off: To begin, switch on the power source and press the button to start up the device. Press Power Off to shut down device. Login: Click Login to open the login screen. You can input your own username and password or login with the default user. The default user is admin, the default password is left blank. Main Menu Login Screen 4 5
User Guide: After logging into the NVR System, the User Guide screen will appear and ask you to set it up as it takes you through the following steps: Language: Choose a language from the drop-down menu. The default language is English. Click Next to save changes and continue. Display Setting Screen Network Setting: IP: Input the Network s IP address. Subnet Mask: Input the corresponding IP Subnet Mask. Default Gateway: Input the corresponding gateway address. Click Next to save and continue logging in to the NVR interface. Language Screen Display Setting: Select the appropriate Video Format and Resolution to match your display. The default Video Format is NTSC and the default Resolution is 1280 1024 (60HZ). Click Next to save and continue. Network Setting Screen 6 7
3. Preview The Preview screen will display after logging in, showing the current video feeds for each individual channel. 4. IP Channel Setting 4.1 Add IPC Automatically Select IP Channel Setting from the Main Menu and click the Search button. All the IPCs that are connected to the NVR will appear and you can modify the settings for each. Preview Screen IP Channel Setting Screen 8 9
When you click the check box in front of any of the listed IP cameras, the IP camera will be added to the channel window on the right. Clicking All will add all of the listed IP cameras to the channel window on the right. Click Save to continue. 4.2 Add IPC Manually You can also manually add the IP Cameras if you already know the address by typing it into the box. IP Channel Setting Screen Manual IPC Entry Screen Select the channel and click the check box in front of Enable. Select relevant Protocol. Input the Address of the IP Camera. Input the Port Number. Select the proper Stream Type. Select Network Type. 10 11
Select the Play Mode. Input the User Name associated with the IP Camera. Input the Password of the IP Camera. Click Save. 4.3 Channel Parameters Modification Open the Channel menu to modify channel parameters. Enable: Select the relevant channel and check Enable to enable a channel. Protocol: Select a protocol type from: Onvif Standard protocol, I8 Private protocol, I9 Private protocol and RTSP protocol. Address: Edit and modify the IP address manually. Port: Edit and set the port number. Stream Type: Select either Main Stream+Sub Stream or Sub Stream. Network Type: Select either TCP or UDP. User: Input the username. Password: Fill in the password. Channel Screen 12 13
4.4 Modify IPC Parameters Double-click the channel settings that need to be modified under Channel and fill in the relevant parameters, click Modify to save. 4.5 Delete IPC Mark the IPC parameters that needed to be removed and click the button. IPC Screen Delete IPC Screen 14 15
5. System Configuration Setting 5.1 Device Setting The NVR s main configuration settings are located under Device in Setting on the Main Menu. Device Info: Check and modify the basic device information. System Version: View the system version number. PTZ Setting: Set the parameters for the Pan-Tilt-Zoom (PTZ) dome cameras. DST Setting: Set the Daylight Savings Time (DTS) settings for the system. 5.2 Channel Parameter Setting Select Channel to modify the settings and features for each of the monitoring cameras in your system. Setting Screen 16 17
5.2.1 Display Setting Select Display Setting to adjust how each camera is displayed on the screen. Time Format: Choose from a 24-hour or 12-hour time display. Date Format: Choose how you would like the date to display. OSD Position: Select the place on the screen where the camera s name and time will display. Image Setting: Adjust the access devices brightness and contrast. Note: Except for the Channel setting, other options only available for privacy protocol equipment. 5.2.2 Video Parameters Modify the Video Parameters for each camera. Display Setting Screen Channel: Choose the channel you would like to modify. Local Camera Name: Enter the camera s name you would like displayed on the channel. Video Parameters Screen 18 19
Channel: Select the channel number for each channel. Encoding Type: Choose either Main Stream or Sub Stream. Stream Type: Choose to either stream the Audio and Video from the camera or just the Video. Resolution: Choose the resolution supported by the camera. Bitrate Type: Choose either CBR or VBR bitrate. Bitrate: Select appropriate bitrate value for this condition. Frame Rate: Choose frame rates from the drop-down menu. The default is full frame rate. Video Quality: Select the quality of video you would like displayed. The default is highest quailty. I Frame Interval: Set the video frame interval. The default is 25. 5.2.3 Schedule Record Use Schedule Record to determine when each channel is going to be recording. Use the Copy To feature to transfer the settings to other channels. Note: Video Setting will be directly modified for the IP camera parameters and is only valid for private protocol channels. Schedule Record Screen 20 21
5.2.3.1 Precise Video Backup If you would like to set a precise video backup time, first make sure the check box in front of All Day Recording is not checked, as this will highlight all available times. Once it is unchecked, hold down the left mouse button and drag the cursor to select the area to define the preferred recording time. Double-click to set the start and end times. left mouse button and drag the cursor to select the area to define the preferred recording time. Double-click to set the start and end times. 5.2.3.2 Record Time Click Record Time under Setting to set a recording schedule. You can set 8 periods during one day. Precise Video Backup Screen Schedule Screen 22 23
5.2.3.3 Advanced Record The Advanced Setting screen allows you to adjust for Pre Recording and Post Recording. 5.2.4 Motion Detection Set the motion detection settings for each video channel and use Copy To to transfer the settings to other channels. Note: IP Cameras must support motion detection for this feature. Setting Screen Motion Screen 24 25
To turn on motion detection for a particular channel, click the check box in front of Enable Motion Detection. Use your mouse to select the areas on the camera s video display that you would like to be covered with motion detection under Area Settings. Adjust the motion detection s Sensitivity to determine how much motion must register on the system before you are alerted. Set Arm Schedule for the motion detection. Set Linkage to define the Trigger Mode the system will use in response to a motion detection. Upload to Center will upload alarm information to the platform. and Trigger Recording will turn on recording for selected channels as a response. Area Settings Screen Linkage Screen 26 27
5.2.5 Video Lost Set an alarm notification in case the camera loses video. Use Copy To to transfer the settings to other channels. Linkage Screen Video Lost Screen Click the check box in front of Enable Video Lost to turn on the feature. Set the Arm Schedule. Select the Linkage to define the Trigger Mode in the event of a loss of video. 28 29
5.2.6 Tampering Alarm This screen enables the triggering of an alarm when a camera is tampered with. Note: IP Cameras must support tampering alarm. Click the check box in front of Enable Video Tampering to activate this feature. Define the tampering alarm areas under Area Settings using your mouse. Adjust the Sensitivity level. Area Settings Screen Tampering Alarm Screen 30 31
Set the Arm Schedule. Select Linkage to define the Trigger Mode in the event of tampering. 5.2.7 Video Mask Setting Use Video Mask to block off the portion of the camera s video that you wish to exclude. Linkage Screen Video Mask Screen 32 33
Click the check box in front of Enable Video Mask to turn on this feature. Define mask areas under Area Settings. 5.3 Network The Network screen gives you access to your network settings. Area Settings Screen Network Screen 34 35
5.3.1 Network Setting Modify the basic network information on the Network Setting screen. the network segment of the IP Camera s access in LAN1 should be the same as NIC1 and NIC2 of LAN2. If a device is equipped with double NIC with POE, the network segment of the IP Camera s access in the POE ports should be the same as the NIC2. IP: Input the relevant IP Address number. DHCP: Click the check box in front of DHCP. It will automatically input a valid IP according to the router DHCP. Subnet Mask: Input a relevant IP Subnet Mask number. Default Gateway: Input a relevant Default Gateway number. MAC: Displays the present MAC address. Remote Port: Input a relevant Remote Port number. HTTP Port: Input a relevant HTTP Port number, the default is 80. Enable 3G: After linking up the 3G accessible equipment, click the check box in front of Enable 3G, select the Device Type, edit the Phone Number, select Work State, then click OK to save: Network Setting Screen NIC: Select corresponding NIC. If a device is equipped with double NIC, select the right NIC. If a device is equipped with double NIC without POE, 3G Screen 36 37
5.3.1.1 Advanced Setting Set advanced configuration parameters under the Advance settings. 5.3.2 DDNS Setting The DDNS server allows the DVR to connect to the Internet through a PC with a fixed IP address. Advance Settings Screen Manage Host allows the NVR to register the servers automatically. Enable PPPOE function for NVR dialing. Click the check box in front of Enable UPnP after setting the HTTP port and TCP port so it can match successfully. Make sure the port number does not conflict with other devices. DDNS Settings Screen Select the DDNS Server Type from the following options: Dyndns, PeanutHull, NO-IP, 3322, and Dnsdynamic. Input the Server Name. (Sample: member.3322.org) Input the Port. Input the Username. Input and confirm the Password. Input the Domain Name. 38 39
5.3.3 NTP Setting 5.3.4 Email Setting Set up parameters so the NVR can send status messages about motion detection or other events through email notifications. NTP Settings Screen Server Address: Input the IP of the NTP server. NTP Port: This NTP only supports TCP transmission, the default is 123. Update Frequency: Input the time interval in hours for the update frequency. Select Time Zone: Select from different time zone options. GMT: Make fine adjustments to the time settings. Email Settings Screen 40 41
5.3.5 Management Platform Set up a connection to management platforms or a WebServer. 5.4 Alarm & Exception The Alarm screen allows you to set up alarms for the NVR system. The NVR will alert you by sounding an alarm sound and creating a pop-up of the live video stream when triggered by events such as motion detection, video loss or hard disk drive problems. Management Platform Screen 42 43
5.4.1 Alarm Input The Alarm Input enables alarm processing, sets the alarm schedule and selects the trigger mode. Alarm Input Screen Linkage Screen Screen 44 45
5.4.2 Alarm Output Sets the alarm output delay and alarm schedule. 5.4.3 Exception Sets the alarm event types, alarm audio type and alarm display settings for the monitor. Alarm Output Screen Alarm Exception Screen 46 47
5.5 Account Setting View and modify details of the user accounts in your system. 5.5.1 User Information Setting Add, modify or delete users and define user permissions under Account Setting. Account Screen Account Setting Screen 48 49
5.5.2 User Online Checking Check to see the current status of each online user s connection. 5.6 System Administration The System screen allows you to modify system settings. User Online Screen System Screen 50 51
5.6.1 Device Log Check the device logs according to the video type and data time. 5.6.2 Stream Info View the band width of data streaming for each channel. Stream Info Screen Device Log Screen Main Type: Sorts by All Types, Alarm, Exception and Operation. Sub Type: Defines sub categories for the corresponding main types. From: Define a starting time for the log display. To: Define an ending time for the log display. Export: Export and all query results. 52 53
5.6.3 HDD Setting Check the capacity and free space of the Hard Disk Drive (HDD) and format if needed. 5.6.4 System Update Browse and select an upgrade file to upgrade the system hardware and view progress. HDD Setting Screen System Update Screen 54 55
5.6.5 Auto Reboot Enable or disable the NVR system to reboot one time, or set a daily or weekly rebooting schedule. 5.6.6 Recovery Configuration Export or import a recovery file. Auto Reboot Screen Recovery Configuration Screen 56 57
6. PTZ Control PTZ (Pan Tilt Zoom) is located on the Main Menu and can be used to set the controls for cameras equipped with the Pan-Tilt-Zoom feature. Cruise Screen On the Cruise screen, set preset, preset name, residence time and cruise speed, then click Add to create a new cruise preset. Click Delete to clear the preset. PTZ Control Screen Preset: Rotate the camera to a specific angle and position and save the setting by selecting a preset number in the dropdown list. Cruise: Set the camera s rotation speed by selecting a cruise number in the drop-down list and clicking the gear button; a screen will pop up with more settings. To recall a cruise setting, select a cruise number in the drop-down list and click the arrow button. To delete a cruise setting, select the cruise number in the drop-down list and click the X button. Track: Set the PTZ camera to automatically detect, follow and record video of moving persons or objects. Select a track number in the drop-down list. Click Track Start to set the PTZ camera operation, and Track Stop to set the track in memory. To recall the track setting, select the track number in the drop-down list and click the arrow button. 58 59
7. Record Record, located on the Main Menu, allows you to set the system to record based on a schedule, or you can manually turn recording on or off for all channels or for individual channels. 9. Video Playback Select Playback on the Main Menu to view and re-play recorded video from each individual channel. Record Screen 8. Manual Snapshot Video Playback Screen Select Capture on the Main Menu and click the camera button in the lower right corner of the screen to take a snapshot of the preview screen. The snapshot pictures can be viewed under File Manager. 60 61
Channel Select: Select the channel you would like to playback. Date Select: Select the date of playback desired. Playback Interface: Use the toolbar at the bottom of the Playback screen to control playing progress, as shown in the table below. Button Operation Button Operation Button Operation Backward Play Stop Slow Down Fast Forward Frame By Frame Play 10. Display Setting Display Setting is located in the Main Menu and allows you to adjust the following settings. Language: Choose a language (Simplified Chinese, English, French, etc.). Auto Logout: Determine how many minutes the system must be idle before it will automatically logout. Display: Adjust the brightness, contrast, saturation, hue, transparency, etc. of the video screen display. Resolution: Select from resolution options to match your display. Enable SEQ: Click the check box in front of Enable SEQ and click the Setting button to select the channel. Selected channels will be displayed in a rotation on the viewing screen. Rotation Interval: Set the rotation interval time in seconds. Snapshot Backup Full Screen Volume Dispaly Setting Screen 62 63
11. Video Backup Backup in the Main Menu allows you to copy the backup video files from the hard disk to an external storage device, such as a USB drive. 12. Alarm Setting Alarm in located in the Main Menu and all the device s alarm information will appear on the list. After you connect the USB, click Refresh to test whether USB devices are identified. If they are, the setting screen will display. Select a single channel or check All to select all channels for backup. Using the From and To fields, select a start and stop time for the backup. Select a file type: i8 or AVI. Click the Start button to begin the backup process. Click Unmount USB after finishing. Alarm Setting Screen Backup Screen 64 65
13. File Manager The File Manager, located in the Main Menu, lists all video and capture images stored on the hard disk drive as well as any video or capture files stored on an attached external storage device such as a USB drive. 14. Image Setting Adjust the brightness, contrast, saturation and hue on the video image through Image Setting located on the Main Menu. Image Setting Screen 15. Screen Aspect Ratio/Segmentation Set the Screen Aspect Ratio on the Main Menu according to the NVR version: 4, 6, 8, 9, 16, 20 or 25 screens. The default Screen Aspect Ratio of the device is 4:3. File Manager Screen Aspect Ratio Screen 66 67
3-Year Limited Warranty All Pro Series products including DVR/NVR, cameras and security HDDs come with a 3-year limited warranty to demonstrate Uniden s commitment to your product s reliability. For more information, visit support.uniden.com/pro-support. Pro Series Customer Service Uniden provides Pro Series Customer Service offering quality support when you need it including: Direct Pro Support Customer Support 24/7 Videos FAQs Specifications Feedback Portal Contact Us: URL: support.uniden.com/pro-support Pro Support Phone: (888) 851-6966 Available M-F 8:30-5:30 CST Customer Support Phone: (800) 297-1023 Available 24/7 Email: prosupport@uniden.com Facebook: https://www.facebook.com/ UnidenAmerica Twitter: https://twitter.com/ uniden_america Remotely view all your devices from your smartphone or tablet Playback video Capture images Receive support directly from your device FREE Uniden Pro Wired App Full Mobile remote control and setup from iphone, ipad, ipod touch and Android devices. Receive alerts via Email or Notification. SYSTEM REQUIREMENTS: Router with Internet access and available Ethernet Port, iphone, ipad, ipod touch or Android device.