//DATASHEET XS4 Wall EADE.0 Cutting-edge design + Outstanding technology: The Wall eader.0 incorporates the cutting edge design standard of the XS4.0 product range in this technological powerhouse. XS4.0 EADE WDBxxx Publications of SALTO SYSTEMS S.L. are protected by copyright and all rights are reserved. SALTO SYSTEMS publications may not be reproduced in any form or by any means without written permission from the copyright owner.
WALL EADE The Wall eader.0 incorporates the cutting-edge design standard of the XS4.0 product range in this technological powerhouse. The Wall eader.0 in combination with the.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution.,5,5 XS4 WALL EADE.0: STANDAD WDB0E04,5,5,5 Modern aesthetic design with clear LED signaling. Conical shape. Fully integrated with the platform. Virtual network capable through SALTO Virtual Network technology. ID technologies available: DESfire, DESfire EV, Mifare, Mifare plus, NFC compatible. All communications between the carrier and the wall reader are encrypted and secure. Acoustic and optical signalling, dual colour green/red to indicate access Available in different finishes: White and Black. Concealed fixing screw for greater security and improved aesthetics. Contactless reading of the carrier, eading distance up to 35mm Dimensions: mm x mm x mm (W x H x D). CETIFICATIONS: IP 66 compliant, suitable for outdoor and indoor use. CE comform (pending). UL 94 (pending). FCC certified (pending).. The maximum cable length between the door controller and the wall reader is 400meters. using a twisted pair cable. Connection to the door controller using AWG4 twisted pair or AWG8 Powered by the controller. Emergency opening by means of contactless portable programming,5 5,5,5,5 5,5 COMPATIBLE WITH STANDAD EUOPEAN ELECTICAL BOX 6 [/ Depending on the card and the FID technology
WALL EADE WITH KEYPAD The Wall eader.0 with keypad incorporates the cutting-edge design standard of the XS4.0 product range in this technological powerhouse. The Wall eader.0in combination with the.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution. This product allows for the additional use of a Personal Identification Number (PIN) key pad option increasing the security by using a double autentication and enhanced more opening modes.,5,5 XS4 WALL EADE.0: EADE + KEYPAD WDB0E04WK,5,5,5 Modern aesthetic design with clear LED signaling. Conical shape. Capacitive keypad. Fully integrated with the platform. Virtual network capable through SALTO Virtual Network technology. ID technologies available: DESfire, DESfire EV, Mifare, Mifare plus, NFC compatible. Permits additional opening modes and user authentication through a user PIN. All communications between the carrier and the wall reader are encrypted and secure. Acoustic and optical signalling, dual colour green/red to indicate access Available in White finish. Keys are iluminatd for better usability (intelligent lightening). SPECIFIC OPENING MODES: Opening through key card. Opening Card plus personal PIN. Opening through doorr code. Dimensions: mm x mm x mm (W x H x D). CETIFICATIONS: IP 66 compliant, suitable for outdoor and indoor use. CE comform (pending). UL 94 (pending). FCC certified (pending). Concealed fixing screw for greater security and improved aesthetics. Contactless reading of the carrier, eading distance up to 35mm The maximum cable length between the door controller and the wall reader is 400meters. using a twisted pair cable. Connection to the door controller using AWG4 twisted pair or AWG8 Powered by the controller. 5,5 Emergency opening by means of contactless portable programming,5,5 5,5 COMPATIBLE WITH STANDAD EUOPEAN ELECTICAL BOX 6 [/ Depending on the card and the FID technology
WALL EADE The Wall eader.0 incorporates the cutting-edge design standard of the XS4.0 product range in this technological powerhouse. The Wall eader.0 in combination with the.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution. This wall reader has been designed to fit on standard ANSI electrical box. (3-3/4") XS4 WALL EADE.0: STANDAD WDB0A04 (3-3/4") (3-3/4") (3-3/4") (3-3/4") Modern aesthetic design with clear LED signaling. Conical shape. Fully integrated with the platform. Virtual network capable through SALTO Virtual Network technology. ID technologies available: DESfire, DESfire EV, Mifare, Mifare plus, NFC compatible. All communications between the carrier and the wall reader are encrypted and secure. Acoustic and optical signalling, dual colour green/red to indicate access Available in different finishes: White and Black. Concealed fixing screw for greater security and improved aesthetics. Contactless reading of the carrier, eading distance up to 35mm Dimensions: mm x 4mm x 9,5mm (W x H x D). CETIFICATIONS: IP 66 compliant, suitable for outdoor and indoor use. CE comform (pending). UL 94 (pending). FCC certified (pending). (3-3/4") The maximum cable length between the door controller and the wall reader is 400meters. using a twisted pair cable. Connection to the door controller using AWG4 twisted pair or AWG8 Powered by the controller. Emergency opening by means of contactless portable programming (.3mm) (.3mm) 3-3/4" (mm) [.3 mm] COMPATIBLE WITH STANDAD ANSI ELECTICAL BOX (.3mm) 3-3/4" (mm) [.3 mm] Depending on the card and the FID technology [.3 mm]
WALL EADE WITH KEYPAD (3-3/4") The Wall eader.0 incorporates the cutting-edge design standard of the XS4.0 product range in this technological powerhouse. The Wall eader.0 in combination with the.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution. This product allows for the additional use of a Personal Identification Number (PIN) key pad option increasing the security by using a double autentication and enhanced more opening modes. XS4.0 EADE: EADE + KEYPAD WDB0A04WK (3-3/4") (3-3/4") (3-3/4") (3-3/4") Modern aesthetic design with clear LED signaling. Conical shape. Capacitive keypad. Fully integrated with the platform. Virtual network capable through SALTO Virtual Network technology. ID technologies available: DESfire, DESfire EV, Mifare, Mifare plus, NFC compatible. Permits additional opening modes and user authentication through a user PIN. All communications between the carrier and the wall reader are encrypted and secure. Acoustic and optical signalling, dual colour green/red to indicate access Available in White finish. Keys are iluminatd for better usability (intelligent lightening). SPECIFIC OPENING MODES: Opening through key card. Opening Card plus personal PIN. Opening through doorr code. Dimensions: mm x 4mm x 9,5mm (W x H x D). CETIFICATIONS: IP 66 compliant, suitable for outdoor and indoor use. CE comform (pending). UL 94 (pending). FCC certified (pending). Concealed fixing screw for greater security and improved aesthetics. Contactless reading of the carrier, eading distance up to 35mm The maximum cable length between the door controller and the wall reader is 400meters. using a twisted pair cable. Connection to the door controller using AWG4 twisted pair or AWG8 Powered by the controller. Emergency opening by means of contactless portable programming 3-3/4" (mm) (.3mm) (.3mm) (.3mm) 3-3/4" (mm) [.3 mm] COMPATIBLE WITH STANDAD ANSI ELECTICAL BOX 3-3/4" (mm) [.3 mm] [.3 mm] Depending on the card and the FID technology
www.saltosystems.com MODULA WALL EADE The SALTO Modular Wall eader.0 incorporates the cutting-edge design standard of the XS4.0 product range in this technological powerhouse. The Modular Wall eader.0 in combination with the.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution for any kind of installations even from adverse and harsh environments thank to the posibility to install it in combination with the antivandalic frame. XS4 MODULA WALL EADE.0: STANDAD WMB0E04x Dimensions: mm x mm x mm (W x H x D). (excludes dimension of the base) Base WMBL Anti-vandalic frame TOX 0 4" 0 [3/6"] 9 0,5 0,5 [3/6"] TOX-0 TAMPE [/ Depending on the card and the FID technology ] 0 [4-5/6"] 9 [3-9/6"] [/ 9 [3-9/6"] 0 [4-5/6"] [/ 6 Base WMBH For surface mounting "] [/ 0 [4-5/6"] 9 [3-9/6"] INSTALLATION BASES - (sold separetely) COMPATIBLE WITH STANDAD EUOPEAN ELECTICAL BOX TOX 0 Base WMBL For flush mounting TOX 0 CETIFICATIONS: ] IP 66 compliant, suitable for outdoor and indoor use. CE comform (pending). UL 94 (pending). FCC certified (pending). Can be installed with an antivandalic frame (WMFWAV for flush mounting or WMFHAV for surface mounting) to protect the WM wall reader from adverse and harsh environments. Contactless reading of the carrier, eading distance up to 35mm (depending on the credential). the door controller and the wall cable length between The maximum reader is 400meters. using a twisted pair cable. Connection to the door controller using AWG4 twisted pair or AWG8 Powered by the controller. Emergency opening by means of contactless portable programming TOX 0 obust aesthetic design with clear LED signaling. Suared shape. Fully integrated with the platform. TOX 0 technology. Virtual network capable through SALTO Virtual Network ID technologies available: DESfire, DESfire EV, Mifare, Mifare plus, NFC compatible. All communications between the carrier and the wall reader are encrypted and secure. Acoustic and optical signalling, dual colour green/red to indicate access Available in03 different finishes: White, Black and Silver. TOX For flush or surface mounting depending on the base (base sold separately. Concealed fixing screw for greater security and improved aesthetics.
DOO CONTOLLE EQUIEED: The Wall eader.0 needs to be used in combination with the XS4.0 Controller (CU4E0 or CU400). Depending on the specific reuirements, the XS4 Wall eader.0 will need to be connected to CU4E0 controller (online)or to the CU400 controller (offline). CU4E0 - ONLINE CONTOLLE CU400 - AUXILIA O OFFLINE CONTOLLE MIFAE: Mifare FID contactless technology reads & writes information to contactless smart cards (FID) compatible with standards, such as Mifare, Mifare plus, DESFire, DESFire EV technologies or even Bluetooth Low Energy (BLE) technology. These technologies also allow for the updating of carriers via SALTO Virtual Network (SVN) technology. Fully integrated with the platform. 3.56MHz contactless FID identification. ISO 4.443A - Mifare, Mifare plus, DESFire, DESFire EV Compatible. ISO 5.693 - Tag it, Icode, Flex Space (SKIDATA) Compatible. Near Field Communication (NFC) compatible. Available key cards: Kbyte, 4Kbytes and 8 Kbytes depending on technology. Available carriers: ISO 80 cards, fobs, bracelets, stickers, watches eusable key cards. SALTO Virtual Network (SVN) compatible. FID technology permits contactless exchange of information between the card and the reader. High security encrypted Proximity cards. Multi-application with other systems using the same card with different sectors. Customized issuing card through SALTO Authorization Media software (SAM). Waterproof cards which can be customized. ID TECHNOLOGIES: ANGE OF FID CEDENTIAL / KEYS AVAILABLE MIFAE: Mifare, Mifare plus, Ultralight C, DESfire, DESfire EV and Vicinity cards. Contactless FID Key Cards MOBILE KEY SOLUTIONS: Contactless FID Fobs msvn SOLUTION: With msvn (Mobile SALTO Virtual Network) it s now possible to update cards remotely and without using a fixed update point. All an end-user needs is an NFC-enabled smartphone to update their DESFire EV credential using SALTOs JustIN msvn App, thereby increasing the flexibility of an instalation s security. XS4 COMPABILITY: XS4 Original FID escutcheon range. Extensive range of escutcheon styles and sizes including European, Scandinavian, ANSI models and Wireless models (FID models only). SMATPHONE: Android minimum version:.3.3 SYSTEM EQUIEMENTS: SALTO ProAccess SPACE software. SMAT KEY COMPABILITY: DESFire EV (AES 3DES encryption) (SALTO SAM Card reuired) BLACKLIST dissemination that increases security without the need to wire or visit doors. Contactless FID Silicone Bracelet Contactless FID Fobs Bracelet MOBILE GUEST KEYS SOLUTION: SALTO Bluetooth mobile guest key via SALTO s JustIN Key app communicates securely via the Cloud and enables a user to receive their door key online, anytime and anywhere. XS4 COMPABILITY: XS4 Original FID escutcheon range. Extensive range of escutcheon styles and sizes including European, Scandinavian, ANSI models and Wireless models (FID models only - no Keypad). SSL: Secure Socket Layer. AES 8 BIT encryption opening procedures. SMATPHONE Compability: ios and Android devices. SYSTEM EQUIEMENTS: SALTO ProAcess SPACE software. SALTO Systems reserves the right to modify technical specifications, designs and performance without notice. SALTO SYSTEMS 05