SINGLE SERVER INSTALLATION GUIDE

Similar documents
Accessing the Web Interface on an SPSx50/x51 GPS Receiver using Bluetooth Wireless Technology

ContractMaster. Converting your data to an SQL format...

Trimble NetRS GPS Infrastructure Receiver

Trimble Infrastructure GNSS Series Receivers

INSTALLATION GUIDE. Trimble AllTrak Software

RELEASE NOTES. Trimble Infrastructure GNSS Series Receivers. Introduction. New features and changes. Updating the firmware

AutoBid SheetMetal 2018v2

Trimble S6 and SPS700 Total Station Firmware

Trimble Survey GNSS Firmware Version 5.01 (April 2015) The following table identifies the Survey GNSS receivers supported by this revision.

NTP Software File Auditor for Windows Edition

DefendX Software Control-Audit for Hitachi Installation Guide

Trimble Accubid Classic 15

Veritas System Recovery 16 Management Solution Readme

Connectware Manager Getting Started Guide

TRIMBLE AUTOBID SHEETMETAL 2017V1

AutoBid Mechanical INSTALLATION GUIDE SOFTWARE. Revision A September 2017 TRANSFORMING THE WAY THE WORLD WORKS

GETTING STARTED GUIDE

DuctDesigner 3D SOFTWARE. Introduction. What you receive with release 2019 v1. Upgrade procedure. Introduction

AutoBid Mechanical CONVERTING DATA FROM THE AUTOBID MECHANICAL 2014V3 FORMAT

TRIMBLE ACCUBID CLASSIC 14.1

Trimble R/5000 Series GPS Receivers Release Notes

Silk Performance Manager Installation and Setup Help

NTP Software File Auditor for Hitachi

NTP Software Defendex (formerly known as NTP Software File Auditor) for NetApp

Trimble Recon Handheld: Using the Socket Bluetooth CompactFlash Card

Update Management ZENworks Mobile Management 3.2.x September 2015

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version

Software Installation with Microsoft SQL 2008

SWCS 4.2 Backup Agent User s Guide Revision /20/2012 Solatech, Inc.

Top Producer for Palm Handhelds

GPS Pathfinder ProXRT Receiver Firmware

Version 6.3 Upgrade Guide

TRIMBLE ACCUBID CLASSIC 14

Installation Guide. Cornerstone* 8.5 NEXT Software and IDEXX-PACS* Imaging Software. Plan for your upgrade

RELEASE NOTES. Trimble Accubid Classic Software. Introduction. New Features/Modifications. Update Installation Instructions. Product Assistance

Installation Guide. Cornerstone* 8.5 NEXT Software and IDEXX-PACS* Imaging Software. Plan for your upgrade

Scribe Insight Installation Guide. Version August 10, 2011

VERITAS StorageCentral 5.2

TRIMBLE AUTOBID SHEETMETAL 2018V1

Lite Depreciation Quick Start Guide

Media Writer. Installation Guide LX-DOC-MW5.1.9-IN-EN-REVB. Version 5.1.9

13.3 RELEASE NOTES. Trimble Accubid Classic Software. Introduction. New Features/Modifications. Update Installation Instructions. Product Assistance

LiNC-NXG for Windows 8 Professional, Windows 7 Professional, Vista Business Edition and XP Professional

Abila MIP DrillPoint Reports. Installation Guide

NTP Software File Reporter Analysis Server

AutoBid Mechanical 2018v1 SOFTWARE

Veritas Desktop and Laptop Option Mac Getting Started Guide

Veritas Desktop Agent for Mac Getting Started Guide

Veritas System Recovery 18 Management Solution Administrator's Guide

CONVERSION STANLEY MANUFACTURED ACCESS CONTROL. Invented for life UPGRADING FROM BOSCH READYKEY X V3.1

TRIMBLE GPS SEARCH TECHNOLOGY FOR THE PROFESSIONAL SURVEYOR

Server Installation ZENworks Mobile Management 2.6.x January 2013

Technical Brief Veritas Technical Education Services

Abila MIP. Human Resource Management Installation Guide

Upgrading from Call Center Reporting to

INSTALLATION GUIDE. Trimble PipeDesigner 3D Software

INSTALLATION INSTRUCTIONS

Updating the operating system and BONGO (MCU) firmware

Trimble CU Updater OS Update Instructions

FAS 50 Asset Accounting Quick Start Guide

Migration from Sybase Installation Instructions

Trimble Survey Controller. Release Notes

Symantec Desktop and Laptop Option 8.0 SP2. Symantec Desktop Agent for Mac. Getting Started Guide

Working with SQL SERVER EXPRESS

2017 v1 RELEASE NOTES

AccessVia Publishing Platform

Junxure Code Upgrade Instructions

Trimble PipeDesigner 3D Software

Ocularis. Installation & Licensing Guide

FAQ AGRICULTURE. Connected Farm Solution: Office Sync. Working with mobile devices

Installing Cash Register Express

Microsoft Office Groove Server Groove Manager. Domain Administrator s Guide

Trimble Positions Mobile Extension

Veritas System Recovery 16 Management Solution Administrator's Guide

1.0. Quest Enterprise Reporter Discovery Manager USER GUIDE

AMS Device View Installation Guide. Version 2.0 Installation Guide May 2018

SoftPro Installation Guide

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Workgroup Deployment Microsoft MSDE 2000

ViconNet Version 8 XX Installation and Upgrade Guide

1. Download the PTS Connect ProLink desktop hub installer from the PTS Connect ProLink web platform and run the installer. The following screen will

About this guide. This guide provides a list. used under. Suite 310. Canada

NTP Software VFM Administration Web Site for Azure

SWCS 4.2 Server Manager Users Guide Revision /22/2012 Solatech, Inc.

PrintShop Mail Web. Getting Started

IntelliTrack DMS (Data Management System) v8.1 Quick Start Guide Preliminary Copy (July 2011) Copyright 2011 IntelliTrack, Inc.

PCLaw Installation and Upgrade Guide

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN

Getting Started: Using HOBOware with HOBO Data Loggers

Installation Guide Worksoft Certify

TECHNICAL NOTES SURVEY PRO WITH TSX

Quick Start Guide GV-VMS

Sage Residential Management Versions 9.5 through Installation Guide

E-Z Mobile for Palm User Guide

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory SQL Server Installation & Administration Guide Version

Trimble FabShop RELEASE NOTES

Enterprise Vault.cloud CloudLink Google Account Synchronization Guide. CloudLink to 4.0.3

8x8 Virtual Office Sage ACT! Integration User Guide

This installation guide is intended for customers who are installing NMIS for the first time. Included are the recommended hardware specifications

LifeSize Control Installation Guide

EventMaster PLUS! Version 4 Installation and Upgrade Guide. Enterprise Deployment Microsoft SQL Server

Transcription:

SINGLE SERVER INSTALLATION GUIDE Trimble 4D Control Software Suite (Version 4.1) Introduction Installation suite Installing the system Checking the installation Legal Notices Version 1 Revision A January 2013

Introduction This document describes a new single server installation of the Trimble 4D Control software, version 4.1. To upgrade an existing installation of the Trimble 4D Control software, version 2.0, 3.0, or 4.0, you must first back up your registry and database and then remove the old installation: select Control Panel - Program and Features. For more information about the necessary backups before you update the software, go to http://trl.trimble.com/docushare/dsweb/ and then search for the TechTip Trimble 4D Control: Updating to Version 4.0. Version 4.1 of the Trimble 4D Control software supports the following: Windows 7 Professional (32 and 64 bit versions) and Windows Server 2008 R2 operating systems Microsoft SQL Server 2008, 2008 R2, and 2012 For more information on upgrading to Microsoft SQL Server 2008 R2, go to http://trl.trimble.com/docushare/dsweb/ and then search for the TechTip Trimble 4D Control Software: Upgrading to Microsoft SQL Server 2008. Installation suite Trimble 4D Control software version 4.1 has an installation suite that makes normal single server installation easier. Start the installation suite directly by clicking the link on the splash screen: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 2

Accept the license agreement and then decide if you want to start a complete or a custom installation: Complete (Server and Client): Automatically installs all Trimble 4D Control components. Custom: Installs the different applications separately. Use this option for distributed environments or for special setups (for example, when installing the web interface on a different computer). Server applications: SQL Server, Trimble 4D Server, SNPCom Client applications: Trimble 4D Desktop, Web interface For more information about distributed installations, email Infrastructure support at infrastructure_support@trimble.com. Installing the system Note Read this guide carefully and make sure the requirements are met before starting the installation. The installation suite installs the necessary components one after another. Some components are optional, depending on the installation. Use the installation wizard to install the following: Optional. Installing Microsoft SQL Server 2008 R2 Express, page 4 Installing the Trimble 4D Control databases, page 5 Optional. Installing the optical positioning communication components, page 7 Installing the Trimble 4D Control Server, page 9 Installing the Trimble 4D Control Desktop, page 13 Once you ve installed the system, open the software to check that all services are running. See Checking the installation, page 17. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 3

Installing Microsoft SQL Server 2008 R2 Express With every installation, decide if you want to install the Microsoft SQL Server or if you want to continue using an existing SQL Server: Trimble 4D Control software version 4.1 is delivered with SQL Server 2008 R2 Express. However, the software supports SQL Server 2008, 2008 R2, and 2012. If you are currently running a system with SQL Server 2005, you must first upgrade SQL Server to SQL Server 2008 R2. Express version SQL Server 2008 R2 Express is free. It has a limited database size (10 GB) and can use only 1 GB RAM. If you plan a system that includes many sensors and high-frequency data, Trimble recommends that you use the standard version of the SQL Server. The suite installation installs the correct version for your operating system (32 or 64 bit version) with the default settings and the following SQL Server logins: Current Windows user Login T4D; Password L0gging Login Sa; Password trimble The password trimble that is used for the SQL Server system administrator account (Sa) does not satisfy Windows strong password requirements. The following message appears if strong password requirements are enabled on your computer, prompting you to install the SQL Server manually: For more information, go to http://trl.trimble.com/docushare/dsweb/ and then search for the TechTip Trimble 4D Control Software: Installing SQL Server with Strong Password Requirements Enabled. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 4

Installing the Trimble 4D Control databases The Trimble 4D Control Database installation creates the T4DDB and MonitoringDB databases with the required tables in the specified SQL Server. 1. To start the installation, click Next. 2. Accept the license agreement and then click Next. 3. Define the T4DDB settings and then click Next. Trimble recommends using the standard settings. Change the settings only if you a familiar with SQL Server databases and users. You must enter the changed settings in all other installation procedures. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 5

4. Define the MonitoringDB connections and then click Next: Trimble recommends using the standard settings. Change the settings only if you a familiar with SQL Server databases and users. You must enter the changed settings in all other installation procedures. 5. Define the MonitoringDB Owner and then click Next. Trimble recommends using the standard settings. Change the settings only if you a familiar with SQL Server databases and users. You must enter the changed settings in all other installation procedures. 6. To create the T4DDB and MonitoringDB with the required tables, click Install. 7. Click Finish. If you are running the Complete install, the next installation procedure starts automatically. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 6

Installing the optical positioning communication components Trimble optical position communication components are necessary to control the Trimble S8 total station. You do not have to install them if you do not want to connect to a total station, but they are installed automatically if you are running the Complete install. 1. To start the installation, click Next: 2. Define the location of the installation and then click Next: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 7

3. To start the installation, click Install. 4. Click Finish. If you are running the Complete install, the next installation procedure starts automatically. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 8

Installing the Trimble 4D Control Server The Trimble 4D Control Server provides core functionality. It connects to the sensors, imports and processes the data, and stores it in the T4DDB database. 1. Click Yes to accept the license agreement: 2. For a single server installation, select all the Trimble 4D Control Server components and then click Next: Trimble Distributed Environment: Installs containers and the controller that runs all the data input, processing, and communication. Trimble Report Generator: Creates reports from T4DDB. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 9

Trimble 4D Control Server DB Server: Logs data into the T4DDBB. Trimble 4D Control Server UI: Graphical user interface for Trimble 4D Control Server. 3. Select the appropriate sensor size type and then click Next: If you are setting up a small system with only one sensor, select the corresponding sensor type. If you have more than one sensor type, many sensors of one kind, or you might add more sensors later, select All Sensors. This selection defines the containers to be installed. 4. Select the setup type and then click Next: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 10

Default setup: Select this option to set up a single server installation. Advanced setup: Select this option to set up a single server with shared folders. If you select this option, define the user account with access to the shared folder in the following dialog. 5. Using an MS SQL Server package, the database server can reside on any participating computer in the network. In this dialog, specify the SQL Server connection and then click Next. Change these settings only if you have defined something else in the database installation. 6. Define the SQL Server connection to the T4DDB for the DBServer and then tap Next. Change these settings only if you have defined something else in the database installation. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 11

7. Define the SQL Server connection to the MonitoringDB for the MonitoringDBService module and then tap Next. Change these settings only if you have defined something else in the database installation. 8. The Start Copying Files dialog summarizes the settings you have provided: To review or change any settings, click Back. To start copying files, click Next. The setup will now copy files, install services and the necessary Microsoft packages, and update the T4DDB database to the current schema. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 12

9. Click Yes if you want to start the services immediately: You may be required to restart your computer. Once the computer restarts, the setup should start automatically. If not, start it manually. Installing the Trimble 4D Control Desktop Trimble 4D Control Desktop is used to manage, create, and configure monitoring projects and sensors that will be visualized in Trimble 4D Control Web. 1. To start the installation, click Next: 2. Accept the license agreement and then click Next: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 13

3. Define the location of the installation and then click Next: 4. Click Install: 5. Click Finish. If you are running the Complete install, the next installation procedure starts automatically TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 14

Installing Trimble 4D Control Web The Trimble 4D Control Web application Is used to visualize, analyze, and alarm the data in a monitoring project and provides remote access to your monitoring system. The web application communicates only with the MonitoringDB database. It does not interact with the Trimble 4D Control Desktop or Trimble 4D Control Server. Alarm Client this is a Windows service that is installed with Trimble 4D Control Web. The Alarm Client runs at defined intervals and checks the MonitoringDB database for alarms. For more information about the procedure to set up the Trimble 4D Control Web, refer to the Trimble 4D Control Web Installation Guide. 1. To start the installation, click Next: 2. Accept the license agreement and then click Next: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 15

3. Enter your user name and organization and then click Next. 4. Set up the SQL Server connection and then click Next. Only change these settings if you defined something else in the database installation. 5. Select Complete to install the Trimble 4D Control Web and the Alarm Client and then click Next. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 16

6. Click Install. 7. Click Finish. This completes the installation of the Trimble 4D Control software. Trimble recommends that you spend some time in familiarizing yourself with the Trimble 4D Control Web Installation Guide for installation verifications and the first steps in using the Trimble 4D Control Web. Checking the installation Once the installation is complete, open TSA to make sure that all services are running. 1. Click the TSA icon in the notification area and then select Configure: Note If the TSA icon does not show in the notification area, Windows has locked it. To start the TSA user interface manually, select Start / All programs / Trimble 4D Control / Trimble 4D Control Server: TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 17

2. Check if all services are running if any service is not running, start it. If any service does not start, check the event viewer and, if required, email infrastructure_support@trimble.com. 3. Once you have verified that everything is running, open the Trimble 4D Control Server user interface and connect it to the controller: 4. Check the notification area to verify that everything is working correctly: 5. If the license status shows that the license is not valid, update the dongle using the License Activator. 6. You can now open the tree view and start configuring the modules in the Trimble 4D Control Server. After you have configured the data import, processing, and storage modules in the Trimble 4D Control Server, use the Trimble 4D Control Desktop to configure the monitoring projects for publishing the data in Trimble 4D Control Web. For more information on how to create projects and sensors in Trimble 4D Control Desktop, refer to the Trimble 4D Control Desktop Software Quick Start Guide. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 18

Legal Notices Contact Details Corporate Office Trimble Navigation Limited Engineering and Construction Group 5475 Kellenburger Road Dayton, Ohio 45424-1099 USA 800-538-7800 (toll free in USA) +1-937-245-5600 Phone +1-937-233-9004 Fax www.trimble.com Copyright and Trademarks 2011-2013, Trimble Navigation Limited. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. 4D Control is a trademark of Trimble Navigation Limited. Microsoft, SQL Server, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Release Notice This is the January 2013 release (Revision A) of the Trimble 4D Control Software - Single Server Installation Guide It applies to version 4.1 of the Trimble 4D Control software. Product Warranty Information For applicable product warranty information, please refer to the Warranty Card included with this Trimble product, or consult your Trimble dealer. TRIMBLE 4D CONTROL SOFTWARE - SINGLE SERVER INSTALLATION GUIDE 19